Covalently stabilized vesicles derived from amphiphilic multiarm star polymers: Preparation,characterization, and their capability of hosting different polarity of guests

The large amount of terminal hydroxyl groups of amphiphilic multiarm star copolymers with hyperbranched polyethylenimine (PEI) as the hydrophilic core and poly(ε‐caprolactone) (PCL) arms as the hydrophobic shell were completely transformed into the radical‐crosslinkable methacrylate (MA) groups. The resulting PEI‐b‐PCL‐MA polymers could self‐assemble into vesicles in water, which was verified by dynamic light scattering (DLS) and transmission electron microscopy (TEM). After crosslinking the intravesicular MA groups, covalently stabilized vesicles (CSVs) were generated. These CSVs were further characterized by DLS and TEM, and it was found that the corona of the vesicles was not the simple double‐layer structure, but contained a certain amount of PEI‐b‐PCL unimolecular micellar units between the double‐layer. These CSVs could accommodate both apolar and polar guests using their hydrophobic PCL zones and void cores, respectively. Moreover, these CSVs showed superior capacities for apolar guests to their noncrosslinked precursors and the corresponding traditional amphiphilic multishell star polymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Polyoxometalate-Engineered Building Blocks with Gold Cores for the Self-Assembly of Responsive Water-Soluble Nanostructures

The controlled assembly of gold nanoparticles (AuNPs) with the size of quantum dots into predictable structures is extremely challenging as it requires the quantitatively and topologically precise placement of anisotropic domains on their small, approximately spherical surfaces. We herein address this problem by using polyoxometalate leaving groups to transform 2 nm diameter gold cores into reactive building blocks with hydrophilic and hydrophobic surface domains whose relative sizes can be precisely tuned to give dimers, clusters, and larger micelle-like organizations. Using cryo-TEM imaging and ¹H DOSY NMR spectroscopy, we then provide an unprecedented “solution-state” picture of how the micelle-like structures respond to hydrophobic guests by encapsulating them within 250 nm diameter vesicles whose walls are comprised of amphiphilic AuNP membranes. These findings provide a versatile new option for transforming very small AuNPs into precisely tailored building blocks for the rational design of functional water-soluble assemblies.     

Polyoxometalate‐Engineered Building Blocks with Gold Cores for the Self‐Assembly of Responsive Water‐Soluble Nanostructures

The controlled assembly of gold nanoparticles (AuNPs) with the size of quantum dots into predictable structures is extremely challenging as it requires the quantitatively and topologically precise placement of anisotropic domains on their small, approximately spherical surfaces. We herein address this problem by using polyoxometalate leaving groups to transform 2 nm diameter gold cores into reactive building blocks with hydrophilic and hydrophobic surface domains whose relative sizes can be precisely tuned to give dimers, clusters, and larger micelle‐like organizations. Using cryo‐TEM imaging and ¹H DOSY NMR spectroscopy, we then provide an unprecedented “solution‐state” picture of how the micelle‐like structures respond to hydrophobic guests by encapsulating them within 250 nm diameter vesicles whose walls are comprised of amphiphilic AuNP membranes. These findings provide a versatile new option for transforming very small AuNPs into precisely tailored building blocks for the rational design of functional water‐soluble assemblies.     

Poly(l-glutamic acid)-based star-block copolymers as pH-responsive nanocarriers for cationic drugs

Star-block copolymers PEI-g-(PLG-b-PEG), which consist of a hyperbranched polyethylenimine (PEI) core, a poly(l-glutamic acid) (PLG) inner shell, and a poly(ethylene glycol) (PEG) outer shell, were synthesised and evaluated as nanocarriers for cationic drugs. The synthesised star-block copolymers were characterised by ¹H NMR, gel permeation chromatography (GPC), dynamic light scattering (DLS), and transmission electron microscopy (TEM). Crystal violet (CV), as a model cationic dye, and doxorubicin hydrochloride (DOX), as a model anticancer drug, could be efficiently entrapped by the synthesised star-block copolymers at physiological pH as a result of electrostatic interactions between the cationic guest molecules and the negatively charged PLG segments in the PEI-g-(PLG-b-PEG) host. The drug–polymer complexes showed relatively high temporal stability at physiological pH and sustained release of the encapsulated drugs was observed. The entrapped model compounds demonstrated accelerated release as the pH was gradually decreased.     

Polymer Cages as Universal Tools for the Precise Bottom‐Up Synthesis of Metal Nanoparticles

A template synthesis allows the preparation of monodisperse nanoparticles with high reproducibility and independent from self‐assembly requirements. Tailor‐made polymer cages were used for the preparation of nanoparticles, which were made of cross‐linked macromolecules with pendant thiol groups. Gold nanoparticles (AuNPs) were prepared in the polymer cages in situ, by using different amounts of cages versus gold. The polymer cages exhibited a certain capacity, below which the AuNPs could be grown with excellent control over the size and shape. Control experiments with a linear diblock copolymer showed a continuous increase in the AuNP size as the gold feed increased. This completely different behavior regarding the AuNP size evolution was attributed to the flexibility of the polymer chain depending on cross‐linking. Moreover, the polymer cages were suitable for the encapsulation of AgNPs, PdNPs, and PtNPs by the in situ method.     

Colloidal stability evolution and completely reversible aggregation of gold nanoparticles functionalized with rationally designed free radical initiators

A series of molecular adsorbates having various chain lengths of terminal poly(ethylene glycol methyl ether) (PEG) moieties, thiol head groups, and intervening free radical initiator moieties was used to functionalize the surface of gold nanoparticles (AuNPs). The bulky PEG groups stabilized the functionalized AuNPs by providing steric hindrance against AuNP aggregation, such aggregation being a major problem in the modification and manipulation of metal nanoparticles. UV–vis spectroscopy was used to evaluate the stability of the adsorbate-functionalized AuNPs as a function of AuNP size (～15, 40, and 90 nm in diameter) and PEG chain length (Mn 350, 750, and 2,000). The longer PEG chains (Mn 750 and 2,000) afforded stability to AuNPs with smaller gold cores (～15 and 40 nm in diameter) for up to several days without any marked aggregation. In contrast, the adsorbate-functionalized AuNPs with the largest gold cores (～90 nm) were noticeably less stable than those with the smaller gold cores. Importantly, the adsorbate-functionalized AuNPs could be isolated in solvent-free “dried” form and readily dispersed in aqueous buffer solution (both acidic and basic) and various organic solvents (protic and aprotic). This isolation–redispersion (i.e., aggregation/deaggregation) process was completely reversible. The chemisorption of the PEG-terminated initiator on the surface of the AuNPs was verified by Fourier transform infrared (FT-IR) spectroscopy and X-ray photoelectron spectroscopy (XPS). As a whole, the strategy reported here affords colloidally stable, free radical initiator-functionalized AuNPs and offers a promising general method for encapsulating metal nanoparticles within polymer shells.

Self-assembling peptide as a potential carrier of hydrophobic compounds

Microcrystals of a hydrophobic cargo were stabilized by EAK16 II, a self-assembling oligopeptide, and suspended in aqueous solution. Pyrene was used as a model hydrophobic compound. Egg phosphatidylcholine (EPC) vesicles were prepared to mimic a cell membrane. Pyrene was released from its EAK16 II coating into EPC vesicles. The excimer decay profiles were acquired. They showed that pyrene is present in the crystalline form when stabilized by EAK16 II, it is molecularly dispersed in EPC vesicles, and it is completely released from its EAK16 II coating into the membrane bilayers. The release of pyrene from the microcrystals coated with EAK16 II into the EPC membrane was followed by fluorescence as a function of time. The amount of pyrene released into the EPC vesicles at a given time was quantified using a calibration curve. The concentration of pyrene released was determined as a function of time, and the concentration-versus-time profile was fitted with one exponential. The rate of pyrene release was found to depend on the peptide-to-pyrene molecular ratio. Higher peptide-to-pyrene ratios lead to slower transfer of pyrene to the lipophilic environment. Scanning electron micrographs demonstrated that a thicker coating on the pyrene crystals results in a slower release. The data presented in this work demonstrate that the self-assembling EAK16 II can stabilize a hydrophobic cargo in aqueous solution and deliver it into a lipophilic environment, and that the rate of transfer can be adjusted by tuning the peptide-to-pyrene ratio.     

Application research of a novel designed peptide as a potential carrier

While a great deal of research has focused on the application of full-sequence ionic complementary peptide, detection of the capability of half-sequence ionic complementary peptide such as drug carriers, is rarely reported. This paper presents that the half-sequence ionic complementary peptide P9 (AC-Pro- Ser-Phe-Asn-Phe-Lys-Phe-Glu-Pro-NH2) can successfully stabilize a model hydrophobic drug pyrene in the aqueous solution. Soybean lecithin vesicles were used to mimic plasma membranes. Fluorescence data show that the pyrene is presented in the crystalline form when stabilized by P9 solution, and molecularly migrated from its peptide encapsulations into the membrane bilayers when the suspension is mixed with lipidosome vesicles. Slower release was observed when thicker coating was applied onto pyrene, which could be to control the wall thickness coating the cargo, and consequently the release rate. The result indicated that P9, with half-sequence ionic complement, may serve as a hydrophobic compounds carrier. Supported by the National ‘985 Project’ of Ministry of Education of China     

Free Energy of Bare and Capped Gold Nanoparticles Permeating through a Lipid Bilayer

Herein, we study the permeation free energy of bare and octane‐thiol‐capped gold nanoparticles (AuNPs) translocating through a lipid membrane. To investigate this, we have pulled the bare and capped AuNPs from bulk water to the membrane interior and estimated the free energy cost. The adsorption of the bare AuNP on the bilayer surface is energetically favorable but further loading inside it requires energy. However, the estimated free‐energy barrier for loading the capped AuNP into the lipid membrane is much higher compared to bare AuNP. We also demonstrate the details of the permeation process of bare and capped AuNPs. Bare AuNP induces the curvature in the lipid membrane whereas capped AuNP creates an opening in the interacting monolayer and get inserted into the membrane. The insertion of capped AuNP induces a partial unzipping of the lipid bilayer, which results in the ordering of the local lipids interacting with the nanoparticle. However, bare AuNP disrupts the lipid membrane by pushing the lipid molecules inside the membrane. We also analyze pore formation due to the insertion of capped AuNP into the membrane, which results in water molecules penetrating the hydrophobic region.     

An ultrasensitive hydrogen peroxide biosensor based on electrocatalytic synergy of graphene–gold nanocomposite, CdTe–CdS core–shell quantum dots and gold nanoparticles

We first reported an ultrasensitive hydrogen peroxide biosensor in this work. The biosensor was fabricated by coating graphene–gold nanocomposite (G–AuNP), CdTe–CdS core–shell quantum dots (CdTe–CdS), gold nanoparticles (AuNPs) and horseradish peroxidase (HRP) in sequence on the surface of gold electrode (GE). Cyclic voltammetry and differential pulse voltammetry were used to investigate electrochemical performances of the biosensor. Since promising electrocatalytic synergy of G–AuNP, CdTe–CdS and AuNPs towards hydrogen peroxide was achieved, the biosensor displayed a high sensitivity, low detection limit (S/N = 3) (3.2 × 10⁻¹¹ M), wide calibration range (from 1 × 10⁻¹⁰ M to 1.2 × 10⁻⁸ M) and good long-term stability (20 weeks). Moreover, the effects of omitting G–AuNP, CdTe–CdS and AuNP were also examined. It was found that sensitivity of the biosensor is more 11-fold better if G–AuNP, CdTe–CdS and AuNPs are used. This could be ascribed to improvement of the conductivity between graphene nanosheets in the G–AuNP due to introduction of the AuNPs, ultrafast charge transfer from CdTe–CdS to the graphene sheets and AuNP due to unique electrochemical properties of the CdTe–CdS, and good biocompatibility of the AuNPs for horseradish peroxidase. The biosensor is of best sensitivity in all hydrogen peroxide biosensors based on graphene and its composites up to now.     

Site-selective assembly and reorganization of gold nanoparticles along aminosilane-covered nanolines prepared on indium-tin oxide

We have fabricated gold nanoparticle (AuNP) arrays on indium-tin oxide (ITO) substrates in a nearly one-dimensional fashion. AuNPs were site-selectively immobilized on ITO of which the surface had been patterned by a nanolithography process based on scanning probe microscopy. The fabricated nanoscale lines covered with aminosilane self-assembled monolayer served as chemisorption sites for citrate-stabilized AuNPs of 20 nm in diameter, accordingly, AuNP nanolines with a thickness of single nanoparticle diameter were spontaneously assembled on the lines. In this 1D array, the AuNPs were almost separated from each other due to the electrostatic repulsion between their negatively charged surface layers. Furthermore, a reorganization process of the immobilized AuNP arrays has been successfully demonstrated by replacing each AuNP's surface layer from citric acid to dodecanethiol. By this process, the AuNPs lost their electrostatic repulsion and became hydrophobic so as to be attracted to each other through hydrophobic interaction, resulting in reorganization of the AuNP array. By repeating the deposition and reorganization cycle, AuNPs were more densely packed. The optical absorption peak of the arrays due to their plasmonic resonance was found to shift from 526 to 590 nm in wavelength with repeating cycles, indicating that the resonance manner was changed from the single nanoparticle mode to the multiple particle mode with interparticle coupling.     

Reactive capture of gold nanoparticles by strongly physisorbed monolayers on graphite

Anthracene Diels Alder adducts (DAa) bearing two long side chains (H-(CH₂)₂₂O(CH₂)₆OCH₂-) at the 1- and 5-positions form self-assembled monolayers (SAMs) at the phenyloctane - highly oriented pyrolytic graphite (HOPG) interface. The long DAa side chains promote strong physisorption of the monolayer to HOPG and maintain the monolayer morphology upon rinsing or incubation in ethanol and air-drying of the substrate. Incorporating a carboxylic acid group on the DAa core enables capture of 1-4 nm diameter gold nanoparticles (AuNPs) provided (i) the monolayer containing DAa-carboxylic acids is treated with Cu²⁺ ions and (ii) the organic coating on the AuNP contains carboxylic acids (11-mercaptoundecanoic acid, MUA-AuNP). AuNP capture by the monolayer proceeds with formation of Cu²⁺ - carboxylate coordination complexes. The captured AuNP appear as mono- and multi-layered clusters at high coverage on HOPG. The surface density of the captured AuNPs can be adjusted from AuNP multi-layers to isolated AuNPs by varying incubation times, MUA-AuNP concentration, the number density of carboxylic acids in the monolayer, the number of MUA per AuNP, and post-incubation treatments.     

New insights into the structure of PAMAM dendrimer/gold nanoparticle nanocomposites

In this work, we have employed a suite of complementary analytical techniques to shed light on the nanocomposite structures formed during gold nanoparticles (AuNPs) synthesis in the presence of poly(amidoamine) (PAMAM) dendrimers. Nanocomposites of AuNPs and either fourth or eighth generation amine-terminated PAMAM dendrimers (G4 or G8) were prepared. The size distributions of AuNPs and the nanocomposites were determined by transmission electron microscopy. Atomic force microscopy phase imaging and neutral impact collision ion scattering spectroscopy (NICISS) were utilized for the first time to investigate and compare nanocomposite structures formed from G4 and G8. Our results suggest that G4 stabilized the AuNP by capping the AuNP particle surface but that a certain fraction of the gold surface was still barely covered. In contrast, the metal nanoparticle surface was completely covered by G8. In addition, NICISS results provided evidence that nanocomposites deformed when being deposited directly onto a substrate.     

Gold nanoparticle enhanced charge transfer in thin film assemblies of porphyrin-fullerene dyads

Photoinduced vectorial electron transfer in a molecularly organized porphyrin-fullerene (PF) dyad film is enhanced by the interlayer charge transfer from the porphyrin moiety of the dyad to an octanethiol protected (dcore approximately 2 nm) gold nanoparticle (AuNP) film. By using the time-resolved Maxwell displacement charge (TRMDC) method, the charge separation distance was found to increase by 5 times in a multilayer film structure where the gold nanoparticles face the porphyrin moiety of the dyad, that is, AuNP|PF, compared to the case of the PF layer alone. Films were assembled by the Langmuir-Blodgett (LB) method using octadecylamine (ODA) as the matrix compound. Atomic force microscopy (AFM) images of the monolayers revealed that AuNPs are arranged into continuous, islandlike structures and PF dyads form clusters. The porphyrin reference layer was assembled with the AuNP layer to gain insight on the interaction mechanism between porphyrin and gold nanoparticles. Interlayer electron transfer was also observed between the AuNPs and porphyrin reference, but the efficiency is lower than that in the AuNP|PF film. Fluorescence emission of the reference porphyrin is slightly quenched, and fluorescence decay becomes faster in the presence of AuNPs. The proposed mechanism for the electron transfer in the AuNP|PF film is thus the primary electron transfer from the porphyrin to the fullerene followed by a secondary hole transfer from the porphyrin to the AuNPs, resulting in an increased charge separation distance and enhanced photovoltage.     

Rational design of light-controllable polymer micelles

Amphiphilic block copolymer (BCP) micelles are nanocarriers that hold promise for controlled delivery applications. This account highlights our recent works on light-dissociable BCP micelles. We have designed and developed light-responsive amphiphilic BCPs whose micellar aggregates (core-shell micelles and vesicles) can be disrupted by light exposure. The basic strategy is to incorporate a chromophore into the structure of the hydrophobic block, whose photoreaction can result in a conformational or structural change that shifts the hydrophilic/hydrophobic balance toward the destabilization of the micelles. Using various chromophores including azobenzene, pyrene and nitrobenzene, we have achieved both reversible and irreversible dissociation of BCP micelles upon illumination with UV/visible or near infrared light. The demonstrated rational design principle based on light-changeable or light-switchable amphiphilicity is general and can be applied to many polymer/chromophore combinations. This opens the door to developing photocontrollable polymer nanocarriers offering control over when and where the release of loaded agents takes place.     

Naked-eye detection of amyloid aggregates using gold nanoparticles modified with amyloid beta antibody

We developed a rapid method for estimating the amyloid beta (Aβ)-conformation state related with Alzheimer's disease. We prepared gold nanoparticle (AuNP)-Aβ antibody conjugates treated with bovine serum albumin to stabilize their dispersibility in a buffer. The prepared AuNPs were precipitated in the presence of Aβ aggregates, such as oligomers and fibrils. Aβ monomers did not precipitate AuNPs. The formation of AuNP precipitates by Aβ aggregates could be confirmed by the naked eye within 1 h.     

Nanowires of 3-D cross-linked gold nanoparticle assemblies behave as thermosensors on silicon substrates

In this study, we used a novel fabrication process, involving electron beam lithography and oxygen plasma treatment, to generate line and dot patterns of (3-mercaptopropyl)trioxysilane units over a large area of the Si(100) surface for gold nanoparticle (AuNP) immobilization. We synthesized the AuNPs in a two-phase system for assembly onto the Si substrate through coordination to the thiol groups of the protecting organic shell patterns. The resulting bottom layer of AuNPs was then treated with 1,6-hexanedithiol to generate thiol groups on their surfaces, thereby allowing the bottom-up construction of multiple layers of three-dimensional cross-linked AuNP assemblies, so-called poly(AuNP), linked directly to the Si substrate. We fabricated nanowires of cross-linked three-layer poly(AuNP) over large areas, with resolutions ranging from 200?nm to 10???m. The nanowires of the poly(AuNP) underwent dramatic changes in their electrical resistivities and morphologies when melting began at a temperature of 140°C. For example, the resistivity of the nanowires assembled from three layers of poly(AuNP) at a width of 1???m increased rapidly from 8.99?×?10^?C4 to 9,471??? m upon increasing the temperature from room temperature to 140°C. Such microwires assembled from lines of poly(AuNP) might, therefore, be applicable as thermosensors on Si surfaces in devices miniaturized to the nanoscale.     

Polystyrene‐Core–Silica‐Shell Hybrid Particles Containing Gold and Magnetic Nanoparticles

Polystyrene‐core–silica‐shell hybrid particles were synthesized by combining the self‐assembly of nanoparticles and the polymer with a silica coating strategy. The core–shell hybrid particles are composed of gold‐nanoparticle‐decorated polystyrene (PS‐AuNP) colloids as the core and silica particles as the shell. PS‐AuNP colloids were generated by the self‐assembly of the PS‐grafted AuNPs. The silica coating improved the thermal stability and dispersibility of the AuNPs. By removing the “free” PS of the core, hollow particles with a hydrophobic cage having a AuNP corona and an inert silica shell were obtained. Also, Fe₃O₄ nanoparticles were encapsulated in the core, which resulted in magnetic core–shell hybrid particles by the same strategy. These particles have potential applications in biomolecular separation and high‐temperature catalysis and as nanoreactors.     

Preparation of Cross‐Linked Micelles from Glycidyl Methacrylate Based Block Copolymers and Their Usages as Nanoreactors in the Preparation of Gold Nanoparticles

This study reports the synthesis of poly(ethylene glycol)methyl ether‐block‐poly(glycidyl methacrylate) (MPEG‐b‐PGMA) diblock, and poly(ethylene glycol)methyl ether‐block‐poly(glycidyl methacrylate)‐block‐poly(methyl methacrylate) (MPEG‐b‐PGMA‐b‐PMMA) triblock copolymers via atom transfer radical polymerization and their self‐assembly behaviors in aqueous media by using acetone as cosolvent. These block copolymers formed near monodisperse core–shell micelles having cross‐linkable cores. Two types of cross‐linked micelles, namely spherical MPEG‐b‐PGMA core cross‐linked (CCL) micelles and MPEG‐b‐PGMA‐b‐PMMA interlayer cross‐linked (ILCL) micelles, were also successfully prepared from these block copolymers by using various bifunctional cross‐linkers such as hexamethylenediamine (HMDA), ethylenediamine (EDA), and 2‐aminoethanethiol (AET). Cross‐linking was successfully carried out via ring‐opening reactions of epoxy residues of hydrophobic‐cores with primary amine or thiol groups of bifunctional cross‐linkers. Finally, these cross‐linked micelles were successfully used as nanoreactors in the synthesis of gold nanoparticles (AuNPs) in aqueous media. Both CCL and ILCL micelles were found to be good stabilizers for AuNPs in aqueous media. Both CCL‐ and ILCL‐stabilized AuNP dispersions were stable for a long time without any size changes and flocculation at room temperature. These cross‐linked stabilized AuNPs exhibited good catalytic activities in the reduction of p‐nitrophenol. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 514–526.     

Polycaprolactone-b-Poly(ethylene oxide) Biocompatible Micelles as Drug Delivery Nanocarriers: Dynamic Light Scattering and Fluorescence Experiments

Summary: Dynamic light scattering (DLS) and fluorescence experiments were carried out to study PCL₄₄-b-PEO₁₁₄ biocompatible micelles used as nanocarriers in drug delivery. Micelles prepared by a simple procedure (THF removal under nitrogen flow) exhibited a narrow size distribution with an average diameter of 100 nm. For micelles containing a hydrophobic model compound (pyrene) within the PCL core, a smaller average micellar size of 80 nm was observed, with a simultaneous broadening in the size distribution profile. In parallel to DLS results, fluorescence experiments showed evidence of pyrene encapsulation, and that the onset of the micellization process occurs at approximately 10/90 (v/v) THF/water mixtures in the case of PCL₄₄-b-PEO₁₁₄ polymer.