Effects of molecular weight and small amounts of d-lactide units on hydrolytic degradation of poly(l-lactic acid)s

Films of poly(l-lactic acid) (PLLA) with different number-average molecular weights (M_n) and d-lactide unit contents (X_d) were made amorphous and the effects of molecular weight and small amounts of d-lactide units on the hydrolytic degradation behavior in phosphate-buffered solution at 37 °C of PLLA were investigated. The degraded films were investigated using gravimetry, gel permeation chromatography, polarimetry, differential scanning calorimetry, X-ray diffractometry, and tensile testing. To exclude the effects of crystallinity on the hydrolytic degradation, the films were made amorphous by melt-quenching. The incorporation of small amounts of d-lactide units drastically enhanced the hydrolytic degradation of PLLA. In the period of 0-32 weeks, the hydrolytic degradation rate constant (k) of PLLA films increased with increasing X_d, while the k values did not depend on M_n. This means that the effects of X_d on the hydrolytic degradation rate of the films are higher than those of M_n. In contrast, in the period of 32-60 weeks neither X_d nor M_n was a crucial parameter to determine k values, probably because in addition to these parameters the differences in the amount of catalytic oligomers accumulated in films and crystallinity affect the hydrolytic degradation behavior of the films. The initially amorphous PLLA films remained amorphous even after the hydrolytic degradation for 60 weeks.     

Enhanced interlayer interaction in cellulose single nanofibre and poly(l-lactic acid) layered films by plasma-initiated surface grafting of poly(acrylic acid) onto poly(l-lactic acid) films

The surface of a poly(l-lactic acid) (PLLA) film was modified with poly(acrylic acid) (PAA) by plasma-initiated polymerization to increase the interaction between PLLA and cellulose single nanofibres (CSNF). The surface wettability of the PAA grafted PLLA film (PLLA-PAA film) was investigated by contact angle measurements. Modification of the PLLA film with PAA decreased the contact angle from 61° to 50°. The surface morphologies of the PLLA film, PLLA-PAA film and CSNF-coated PLLA-PAA film were studied by atomic force microscopy. The interaction between the CSNF and PLLA layers was strengthened by incorporation of a PAA layer onto the PLLA films and it is higher than 2N as proved by a peeling test. This is probably because the carboxyl groups of PAA form hydrogen bonds with the hydroxyl groups of CSNF.     

Solid-phase synthesis of peptide ribonucleic acids (PRNA)

The range of available peptide ribonucleic acid (PRNA) monomers was fully expanded for the use in solid-phase synthesis of PRNA oligomers, which were designed to reversibly control the recognition and complexation behavior of the complementary DNA/RNA by external factors. A couple of PRNA 12-mers with desired purine-pyrimidine mixed sequences were prepared indeed in high yields by the solid-phase synthesis.     

Racemization behavior of l,l-lactide during heating

To control the depolymerization process of poly(l-lactic acid) into l,l-lactide for feedstock recycling, the racemization of l,l-lactide as a post-depolymerization reaction was investigated. In the absence of a catalyst, the conversion to meso-lactide increased with increase in the heating temperature and time at a higher rate than the conversion into oligomers. The resulting high composition of meso-lactide suggests that the direct racemization of l,l-lactide had occurred in addition to the known racemization mechanism that occurs on the oligomer chains. In the presence of MgO, the oligomerization rapidly proceeded to reach an equilibrium state between monomers and oligomers. The equilibrium among l,l-, meso-, and d,d-lactides was found to be a convergent composition ratio l,l-:meso-:d,d-lactides = 1:1.22:0.99 (wt/wt/wt) after 120 min at 300 °C. This composition ratio also indicates that in addition to the known racemization reaction on the oligomer chains, direct racemization among the lactides is also a frequent occurrence.     

Enzymatic degradation of block copolymers obtained by sequential ring opening polymerization of l-lactide and ?-caprolactone

Copolymers of ?-caprolactone and l-lactide with different molar ratios were prepared via sequential ring opening polymerization (ROP) of both monomers. The resulting PCL-PLLA-PCL triblock copolymers were characterized by using NMR, SEC, DSC and XRD. One melting peak corresponding to the PCL block was detected, but the presence of PLLA decreased the crystallinity of PCL. Enzyme-catalyzed biodegradation of solution cast films was investigated at 37 °C in the presence of Pseudomonas lipase. It was observed that the PLLA component retarded the degradation of the block copolymer as compared to the PCL homopolymer. Therefore, the enzymatic degradation rate can be adjusted by varying the composition of the copolymers. ¹H NMR and SEC data showed no significant chemical composition or molecular weight changes during degradation, indicating that the degradation proceeded according to a surface erosion mechanism. ESEM confirmed surface erosion with appearance of a rugged morphology.     

Photodegradation of biodegradable polyesters: A comprehensive study on poly(l-lactide) and poly(?-caprolactone)

The photodegradation of melt-crystallized and amorphous-made poly(l-lactide) (PLLA-C and PLLA-A, respectively) and cast-crystallized poly(?-caprolactone) (PCL) was investigated comprehensively for the periods up to 200 h using gel permeation chromatography, differential scanning calorimetry, tensile testing, and polarization optical microscopy. The photodegradation of PLLA and PCL films proceeds via a bulk erosion mechanism, indicating that UV penetrates the specimens with no significant reduction in its intensity, irrespective of the chemical structure and the crystallinity of biodegradable polyesters. The photodegradability of PCL chains was higher than that of PLLA chains. This strongly suggests that the chemical structure of the two sequential groups adjacent to the ester oxygen rather than the density of ester group is crucial to determine the photodegradability of biodegradable polyesters. Although PLLA chains are photodegradable even in the crystalline regions, their photodegradability is lower than that in the amorphous regions. The significant increase in weight-average molecular weight (M_w)/number-average molecular weight (M_n) was observed for PLLA-A and PCL films, even when the decrease in M_n by UV irradiation was small. Most of the tensile properties of PLLA and PCL films remained unchanged during UV irradiation, while solely the elongation at break of PCL film significantly decreased. This result reflects that among the tensile properties the elongation at break was most sensitive to the change in molecular characteristics of biodegradable polyesters by UV irradiation. The contrast between bright and dark parts of Maltese crosses remained unchanged for the spherulites in PLLA-C and PCL films even after UV irradiation for 200 h. This result exhibits that the cleaved fraction of the tie chains was too low to cause the traceable disorientation of lamellae.     

Biodegradable poly(l-lactic acid) nanofiber prepared by a carbon dioxide laser supersonic drawing

Biodegradable poly(l-lactic acid) (PLLA) nanofiber was prepared by a carbon dioxide (CO₂) laser supersonic drawing which was carried out by irradiating the laser on an as-spun fiber in a supersonic jet. The supersonic jet was generated by blowing off air into a vacuum chamber from a fiber supplying orifice. The flow velocity from the orifice can be estimated by applying Graham’s theorem from the pressure difference between the atmospheric pressure and the pressure of the vacuum chamber. The fastest flow velocity estimated was 396 m s⁻¹ when the chamber pressure was 6 kPa. The PLLA nanofiber having an average diameter of 0.132 μm was obtained when the supersonic drawing was carried out by irradiating the laser at 177 W cm⁻² on the as-spun fiber supplied at 0.1 m min⁻¹ in the vacuum chamber at 6 kPa. The obtained nanofiber had a draw ratio of about 323,000 and a degree of crystallinity of 45%, and its diameter uniformity was high. The CO₂ laser supersonic drawing was a new route for preparation of various nanofibers without using any solvent.     

Influence of cellulose nanowhiskers on the hydrolytic degradation behavior of poly(d,l-lactide)

This paper reports the preparation of bionanocomposites based on poly(d,l-lactide) and cellulose nanowhiskers (PDLLA/CNWs) and studies the influence of the CNWs on the hydrolytic degradation behavior of the polylactide. The hydrolytic degradation process was studied in a phosphate buffer medium through the sample weight loss and also by FTIR, DSC and TGA measurements. The presence of CNWs induced a strong delay in the hydrolytic degradation of the PDLLA, even when the concentration of the nanofillers was only 1%. This effect was related to the physical barrier created by the highly crystalline CNWs that inhibited water absorption and hence retarded the hydrolytic degradation of the bionanocomposites. In addition, the incorporation of cellulose nanocrystals in the PDLLA also made the biopolymer more thermally stable, increasing the initial temperature of mass loss even after the degradation in phosphate medium. The results presented here show the possibility of controlling the biodegradability and prolonging the service life of a polylactide through the incorporation of a small quantity of nanofillers obtained from renewable materials.     

Swelling and hydrolytic degradation of poly(d,l-lactic acid) in aqueous solutions

Low molecular weight poly(lactic acid) was synthesized by direct polycondensation of lactic acid. The oligomers were characterized by viscometry, light scattering, and gel permeation chromatography (GPC). The swelling behaviour of tablets made of the above polymer immersed in buffer solutions at 37 °C was studied. In the same experiments, the hydrolytic stability of d,l-PLA was assessed by measuring the weight loss after drying the tablets. In order to inhibit any degradation due to bacteria, formaldehyde was added in the solution as biostatic factor. The effect of an incorporated drug on the swelling behaviour of d,l-PLA tablets was also considered. It was found that the incorporation of drug in d,l-PLA tablets increases their swelling index, probably due to the creation of additional porosity in the specimens or other interaction between drug and polymeric matrix.     

A convenient synthesis of l-ribose from d-fructose

An efficient method for the stereoselective synthesis of l-ribose was accomplished starting from commercially inexpensive d-fructose. The intermediates in the process can serve as versatile precursors for the preparation of l-nucleoside analogues.     

Determination of L- and D-enantiomers of methotrexate using amperometric biosensors

In order to determine the enantiopurity of methotrexate (Mtx), seven biosensors were proposed for the assay of l-Mtx and three biosensors for the assay of d-Mtx. The biosensors were designed using physical and chemical immobilization of glutamate oxidase and/or l-amino acid oxidase (l-AAOD) and/or horseradish peroxidase (HRP) for the assay of l-methotherexate, and d-amino acid oxidase (d-AAOD) and HRP for the assay of d-Mtx. Electrode characteristics were obtained and compared for the different carbon paste based biosensors. The linear concentration ranges for the proposed biosensors were in the ranges of fmol l⁻¹ to pmol l⁻¹, magnitude order with limits of detection in the fmol l⁻¹ to nmol l⁻¹ concentration range. All biosensors were successful for the determination of the enantiopurity of Mtx as raw material, and in its pharmaceutical formulations (tablets and injections).     

Characterization and release of triptolide-loaded poly (d,l-lactic acid) nanoparticles

Triptolide (TP), which has immunosuppressive effect, anti-neoplastic activity, anti-fertility function and severe toxicities on digestive, urogenital, blood circulatory system, was used as a model drug in this study. TP-loaded poly (d,l-lactic acid) (PLA) nanoparticles were prepared by the modified spontaneous emulsification solvent diffusion method (modified-SESD method). Dynamic light scattering system (DLS), transmission electron microscope (TEM), atomic force microscopy (AFM), differential scanning calorimetry (DSC), X-ray powder diffractometry and Fourier transform infra-red spectroscopy (FT-IR) were employed to characterize the nanoparticles fabricated for size and size distribution, surface morphology, the physical state of drug in nanoparticles, and the interaction between the drug and polymer. Encapsulation efficiency (EE) and the in vitro release of TP in nanoparticles were measured by the reverse phase high-performance liquid chromatography (RP-HPLC). The produced nanoparticles exhibited a narrow size distribution with a mean size of approximately 150 nm and polydispersity index of 0.088. The morphology of the nanoparticles exhibited a fine spherical shape with smooth surfaces without aggregation or adhesion. TP-entrapped in nanoparticles was found in the form of amorphous or semicrystalline. It was found that a weak interaction existed between the drug and polymer. In all experiments, more than 65% of EE were obtained. The in vitro release profile of TP from nanoparticles exhibited a typical biphasic release phenomenon, namely initial burst release and consequently sustained release. In this case, the particle size played an important role for the drug release. The modified-SESD method was a potential and advantage method to produce an ideal polymer nanoparticles for drug delivery system (DDS).     

Crystallization behavior of poly(l-lactic acid)

This article contains a detailed analysis of the crystallization behavior of poly(l-lactic acid) (PLLA). Crystallization rates of PLLA have been measured in a wide temperature range, using both isothermal and non-isothermal methods. The combined usage of multiple thermal treatments allowed to obtain information on crystallization kinetics of PLLA at temperatures almost ranging from glass transition to melting point. Crystallization rate of PLLA is very high at temperatures between 100 and 118 °C, showing a clear deviation from the usual bell-shaped curve. This discontinuity has been ascribed to a sudden acceleration in spherulite growth, and is not associated to morphological changes in the appearance of PLLA spherulites. Experimental data of spherulite growth rates of PLLA have been analyzed with Hoffman-Lauritzen method. Applicability and limitations of this theoretical treatment have been discussed.     

New low-molecular weight gelators based on l-valine and l-isoleucine with various terminal groups

New low-molecular weight gelators based on l-valine and l-isoleucine, which have various terminal groups such as ester, carboxyl, and carboxylate, function as a good organogelator that form an organogel in many organic solvents. In addition, the sodium salt compounds form not only organogels but also a hydrogel in the presence of a cationic surfactant.     

New organotin(IV) complexes with l-Arginine, Nα-t-Boc-l-Arginine and l-Alanyl-l-Arginine: Synthesis, structural investigations and cytotoxic activity

Novel diorganotin(IV) derivatives of l-Arginine (HArg), N_α-(tert-Butoxycarbonyl)-l-Arginine (Boc-Arg-OH) and l-Ala-l-Arg (H₂Ala-Arg), H₂NC(NH)NH(CH₂)₃CH(NHR′)CO₂H, where R′ = H in HArg, R′ = C(O)OC(CH₃)₃ in Boc-Arg-OH, R′ = H₂NCH(CH₃)CO in H₂Ala-Arg and triorganotin(IV) derivatives of Boc-Arg-OH have been synthesized and structurally characterized. The complexes were investigated by FT-IR and ¹¹⁹Sn Mössbauer in the solid state and by ¹H, ¹³C, ¹¹⁹Sn and ¹H-¹H COSY NMR spectroscopy, in solution. The spectroscopic characterization leading to the proposed molecular structures was accomplished on the basis of these experiments. l-Arginine appears to behave as a chelating ligand through carboxylate and -NH₂ groups in Me₂Sn(Arg)₂, while in N_α-t-Boc-l-Arginine complex, the N_α-protected amino group being exempted from coordination, only the carboxylate groups are effectors of bonding to the organometallic moieties. FT-IR spectra give a clear indication that guanidino groups in all the complexes are not involved in coordination, since ν(CN-H) frequency of the terminal guanidino group is fairly constant and unshifted relative to the free ligand. The biological activity of organotin(IV)-complexes was also investigated by use of human HT29 colorectal carcinoma cells. The cytotoxic activity of the compounds was determined by the MTT quantitative colorimetric assay, capable of detecting viable cells in comparison with that exerted by cisplatin. A marked cytotoxic activity for nearly all complexes, is evident being higher than that exerted by cisplatin, while no significant improvement of activity was observed for Me₂Sn(Arg)₂ and Me₂Sn(Ala-Arg), which was confirmed by IC₅₀ values. Then, we assessed whether the cytotoxicity induced by organotin(IV) complexes was associated with the induction of apoptosis. Light microscopy analysis, performed to study the morphological changes induced in HT29 cells, confirmed the results obtained with MTT test. No significant morphological alterations were observed in HT29 cells after treatment with Me₂Sn(Ala-Arg) and Me₂Sn(l-Arg)₂. Cells treated with ⁿBu₂Sn(Boc-Arg)₂, ⁿBu₂Sn(Ala-Arg), ⁿBu₃Sn(Boc-Arg) and Me₃Sn(Boc-Arg), appeared rounded, isolated and detached from culture substrate, indicating the commitment to apoptotic cell death.     

Synthesis of high-molecular-weight poly(l-lactic acid) through the direct condensation polymerization of l-lactic acid in bulk state

A strategy was attempted to produce high-molecular-weight poly(l-lactic acid) (PLLA) through the direct condensation polymerization of l-lactic acid in bulk state. Polymerizations were carried out with titanium(IV) butoxide (TNBT) as a catalyst employing different duration of decompression, esterification and polycondensation. The molecular weights were characterized by using the gel permeation chromatography (GPC). The stereosequences were analyzed from the ¹³C NMR spectra on the basis of the triad fractions.     

New pyrano[3,4-b]indoles from 2-hydroxymethylindole and l-dehydroascorbic acid

2-Hydroxymethylindole reacts with l-dehydroascorbic acid under mild conditions to give (3R,3aR,10cS)-3-[(1S)-1,2-dihydroxyethyl]-3a,10c-dihydroxy-3a,5,6,10c-tetrahydrofuro[3′,4′:5,6]pyrano[3,4-b]indol-1(3H)-one. Its tosyl derivative undergoes cyclization to form a pentacyclic ketal derivative.     

Hydrolytic degradation of copolymers based on l-lactic acid and bis-2-hydroxyethyl terephthalate

The current demand for environmentally degradable copolymers has led to the use of novel degradable copolyesters. A series of copolyesters based on bis-2-hydroxyethyl terephthalate and l-lactic acid oligomers were synthesized by melt polycondensation [Olewnik E, Czerwiński W, Nowaczyk J, Sepulchre M-O, Tessier M, Salhi S, et al. Synthesis and structural study of copolymers of l-lactic acid and bis(2-hydroxyethyl terephthalate). Eur Polym J, in press]. Hydrolytic degradation of copolymers containing 16.8-52.9 mole ratio of l-lactic acid units was carried out in two buffered solutions at two different temperatures: phosphate buffer solution (pH 7.40) at 45 °C and phosphate-citric buffer solution (pH 7.35) at 60 °C. Degradation of copolyesters was studied by incubating samples in powder form in a concentrated solution from 30 to 180 days.The copolymers were characterized by various analytical techniques. The thermal properties, morphology and structural changes during controlled hydrolysis were studied by scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) for determining melting points, heats of melting and decomposition temperatures of investigated copolyesters. ¹H NMR spectroscopy was used to observe the decomposition of the polyesters.     

Primary Amine‐Initiated Polymerizations of α–Amino Acid N‐Thiocarbonic Acid Anhydrosulfide

The N‐thiocarbonic acid anhydrosulfides NTAs of D,L‐leucine, D,L‐phenylalanine and sarcosine were polymerized in dioxane by addition of n‐hexylamine as initiator. Despite variation of the monomer‐initiator ratio (M/I) only low yields of oligopeptides were obtained from D,L‐Leu‐ and D,L‐Phe‐NTA. Both yields and molecular weights were almost twice as high for polymerizations of Sar‐NTA. MALDI‐TOF mass spectra confirmed that the isolated oligo‐and polypeptides possess the expected structure with one reactive amino end group. Therefore, it is surprising that the polymerizations stopped at low conversions. Two hypotheses explaining this phenomenon are discussed.