Temperature-induced intermicellization and contraction in aqueous mixtures of sodium dodecyl sulfate and an amphiphilic diblock copolymer

Aqueous solutions of a thermoresponsive amphiphilic diblock copolymer, containing poly(N-isopropylacrylamide), in the presence of the anionic sodium dodecyl sulfate (SDS) surfactant can undergo a temperature-induced transition from loose intermicellar clusters to collapsed core–shell nanostructures. The polymer–surfactant mixtures have been characterized with the aid of turbidity, small-angle neutron scattering (SANS), intensity light scattering (ILS), dynamic light scattering (DLS), shear viscosity, and rheo-small angle light scattering (rheo-SALS). In the absence of SDS, compressed intermicellar structures are formed at intermediate temperatures, and at higher temperatures further aggregation is detected. The SANS results disclose a structure peak in the scattered intensity profile at the highest measured temperature. This peak is ascribed to the formation of ordered structures (crystallites). In the presence of a low amount of SDS, a strong collapse of the intermicellar clusters is observed at moderate temperatures, and only a slight renewed interpolymer association is found at higher temperatures because of repulsive electrostatic interactions. Finally, at moderate surfactant concentrations, temperature-induced loose intermicellar clusters are detected but no shrinking was registered in the considered temperature range. At a high level of SDS addition, large polymer–surfactant complexes appear at low temperatures, and these species are compressed at elevated temperatures. The rheo-SALS results show that the transition structures are rather fragile under the influence of shear flow.     

The Effect of Number of Arms on the Aggregation Behavior of Thermoresponsive Poly(N-isopropylacrylamide) Star Polymers

The thermoresponsive nature of aqueous solutions of poly(N-isopropylacrylamide) (PNIPAAM) star polymers containing 2, 3, 4, and 6 arms has been investigated by turbidity, dynamic light scattering, rheology, and rheo-SALS. Simulations of the thermosensitive nature of the single star polymers have also been conducted. Some of the samples form aggregates even at temperatures significantly below the lower critical solution temperature (LCST) of PNIPAAM. Increasing concentration and number of arms promotes associations at low temperatures. When the temperature is raised, there is a competition between size increase due to enhanced aggregation and a size reduction caused by contraction. Monte Carlo simulations show that the single stars contract with increasing temperature, and that this contraction is more pronounced when the number of arms is increased. Some samples exhibit a minimum in the turbidity data after the initial increase at the cloud point. The combined rheology and rheo-SALS data suggest that this is due to a fragmentation of the aggregates followed by re-aggregation at even higher temperatures. Although the 6-arm star polymer aggregates more than the other stars at low temperatures, the more compact structure renders it less prone to aggregation at temperatures above the cloud point.     

Temperature-induced formation and contraction of micelle-like aggregates in aqueous solutions of thermoresponsive short-chain copolymers

A combination of turbidity, light scattering, and steady shear viscosity experiments has revealed that aqueous solutions of an amphiphilic diblock copolymer or a negatively charged triblock copolymer, both containing poly(N-isopropylacrylamide), can undergo a temperature-induced transition from loose intermicellar clusters to collapsed core-shell nanostructures. Turbidity, light scattering, and viscosity results of these short-chain copolymers disclose transition peaks at intermediate temperatures. At high temperatures, the compact core-shell particles from the diblock copolymer aggregate, whereas no renewed interpolymer association is observed for the triblock copolymer or for the solution of the diblock copolymer with added sodium dodecyl sulfate because the electrostatic repulsive interactions suppress the tendency of forming interpolymer clusters. The temperature-induced building up of intermicellar structures and the formation of large aggregates at high temperature in the solution of the diblock copolymer is significantly reduced under the influence of high shear rates.     

Nonionic surfactant and temperature effects on the viscosity of hydrophobically modified hydroxyethyl cellulose solutions

Nonionic surfactant and temperature effects on the viscosity of hydrophobically modified hydroxyethyl cellulose (HMHEC) solutions are investigated experimentally. Weak shear thickening at intermediate shear rates takes place for HMHEC at moderate concentrations and becomes more significant at lower temperatures. While this amphiphilic polymer in surfactant-free solution does not turn turbid by heating to 95 degrees C, its mixture with nonionic surfactant shows a lower cloud point temperature than does a pure surfactant solution. For some mixture cases, phase separation takes place at temperatures as low as 2 degrees C. The drop of cloud point temperature is attributed to an additional attractive interaction between mixed micelles via chain bridging. With increasing temperature, the viscosity of an HMHEC-surfactant mixture in aqueous solution first decreases but then rises considerably until around the cloud point. The observed viscosity increase can be explained by the interchain association because of micellar aggregation.     

Effects of Hofmeister anions on the flocculation behavior of temperature-responsive poly(N-isopropylacrylamide) microgels

Effects of some sodium salts (NaCl, NaClO₃, and NaSCN) in the Hofmeister series on deswelling and temperature-induced aggregation behavior of microgels of poly(N-isopropylacrylamide) (PNIPAAM) and PNIPAAM-co-PAA with attached poly(acrylic acid) moieties were investigated with the aid of turbidimetry and dynamic light scattering. Addition of salt in the concentration range 0.1–0.5?M generated aggregation of the PNIPAAM microgel particles at elevated temperatures, but it was no distinct difference between chaotropic and kosmotropic anions. In contrast, the flocculation behavior at high temperatures for PNIPAAM-co-PAA revealed a prominent influence of salinity and type of anion on the formation of aggregates. The aggregation transition was shifted to the highest temperature for the most chaotropic anion (SCN^?), and the aggregation transition at the same salt concentration is consistent with the typical Hofmeister series. The turbidity results from the PNIPAAM-co-PAA microgels disclosed a two-step transition for the considered anions, and both a low and high temperature change in the turbidity data was observed. The high-temperature transition followed the Hofmeister series.     

Influence of Dodecyl Trimethylammonium Chloride on the Structure and Properties of Konjac Glucanmannan

This study presents the interaction between konjac glucanmannan(KGM) and cationic surfactant dodecyl trimethylammonium chloride(DTAC) to provide theoretical guidance and prediction for the experimental design and application of this composite system. Dissipative particle dynamics(DPD) method was used to simulate the interaction between KGM and the cationic surfactant. Influences of concentration, temperature and shear process on the structure and properties of aggregates were mainly examined. The results revealed that the density peak increased with the increase of concentration of KGM. With increasing the temperature, density peak moved to the right and increased, and then decreased when the temperature rose to a certain value. The density peak moved to the right at the low shear rate while decreased at the high one. During simulation, the high viscosity related to the low diffusion rate, which made it difficult to form a large continuous phase.     

Effects of surfactant and temperature on rheological and structural properties of semidilute aqueous solutions of unmodified and hydrophobically modified alginate

The dynamic and structural perturbations that result from the interactions between the anionic surfactant sodium dodecyl sulfate (SDS) and the hydrophobically modified biopolymer alginate (HM-alginate) have been studied with the aid of rheological methods, turbidimetry, and small-angle neutron scattering (SANS). The rheological results for a semidilute HM-alginate solution in the presence of SDS disclose strong interactions between HM-alginate and SDS at a low level of surfactant addition, and this feature is accompanied by enhanced turbidity. At higher surfactant concentrations the association complexes are disrupted. A strong temperature effect of the viscosity is observed in HM-alginate solutions at moderate SDS concentrations, where an elevated temperature leads to enhanced chain mobility, which promotes a breakup of the association complexes. The SANS results reveal a pronounced peak in the plot of scattered intensity versus wavevector q at intermediate q values for SDS concentrations above the critical micelle concentration (cmc). With contrast-matching conditions, using deuterated SDS instead of SDS, no interaction peak appears but an "upturn" in the scattered intensity is observed at small q value. The magnitude of this effect decreases with increasing surfactant concentration, showing clearly that SDS is capable of breaking up the large aggregates created.     

聚醚树枝体线性聚(N-异丙基丙烯酰胺)不对称嵌段共聚物的 合成及自组装

采用原子转移聚合方法合成了聚N-异丙基丙烯酰胺和聚醚树技体的不对嵌段共聚物Dendr.PE-PNI-PAM。实验结果表明Dendr.PE-PNIPAM分子在水中能通过疏水缔合作用形成具有双分子膜结构的超分子聚集体。临界缔合浓度(CAC)、聚集体的大小及形貌对树枝体的代数具有明显的依赖关系。该聚集体对温度刺激具有响应性,并在人体体温温度(37.5℃)发生相转变。在高于相转变温度时,Dendr.PE-PNIPAM分子形成管状、带状等多重形态的超级结构的聚集体。     

Phase separation and structural properties of semidilute aqueous mixtures of ethyl(hydroxyethyl)cellulose and an ionic surfactant

Turbidity and small-angle neutron scattering (SANS) measurements have been carried out over an extended temperature range (10-60 °C) on thermoreversible gelling and non-gelling semidilute aqueous systems of ethyl(hydroxyethyl)cellulose (EHEC) in the presence of various amounts of sodium dodecyl sulfate (SDS). EHEC dissolved in D₂O exhibits a lower consolute solution temperature with an abrupt change of the turbidity upon heating the sample. The turbidity transformation is shifted toward higher temperatures (the cloud point temperature rises) and it becomes gradually gentler as the level of surfactant addition increases. Precision turbidity measurements demonstrate the existence of hysteresis effects when heating and cooling scans are conducted. This effect is reduced with SDS addition and disappears at a sufficiently high SDS concentration where most aggregates are disrupted. It is shown from temperature quench turbidity experiments that it takes a very long time for the temperature-induced complexes to disintegrate. The scattered intensity results from SANS at low values of the scattering vector (q) disclose that elevated temperature and low SDS concentration promote the formation of large-scale associations, and at higher levels of surfactant addition the tendency to form aggregates is suppressed. At high surfactant concentrations (8 and 16 mm), an interaction peak appears in the spectrum at intermediate values of q. For the EHEC sample with 8 mm SDS, the peak disappears at higher temperatures because of enhanced hydrophobicity of the polymer. The analysis of the SANS data for the gelling sample (EHEC with 4 mm SDS) reveals that the inhomogeneity of the gel becomes more pronounced in the post-gel region.     

Structural properties of ionic detergent aggregates: a large-scale molecular dynamics study of sodium dodecyl sulfate

The properties of sodium dodecyl sulfate (SDS) aggregates were studied through extensive molecular dynamics simulations with explicit solvent. First, we provide a parametrization of the model within Gromacs. Then, we probe the kinetics of aggregation by starting from a random solution of SDS molecules and letting the system explore its kinetic pathway during the aggregation of multiple units. We observe a structural transition for the surfactant aggregates brought upon by a change in temperature. Specifically, at low temperatures, the surfactants form crystalline aggregates, whereas at elevated temperatures, they form micelles. We also investigate the dependence of aggregation kinetics on surfactant concentration and report on the molecular level structural changes involved in the transition.     

Intramolecular and intermolecular association during chemical cross-linking of dilute solutions of different polysaccharides under the influence of shear flow

Effects of shear flow on intramolecular and intermolecular associations of dilute aqueous alkali solutions of dextran, hydroxyethylcellulose (HEC), and a hydrophobically modified analogue (HM-HEC) in the presence of a chemical cross-linker agent were characterized with the aid of viscometry and rheo-small-angle light scattering (rheo-SALS) methods. The picture that emerges at short times in the course of cross-linking of the polymer solutions under the influence of a constant shear rate is that HEC coils contract because of intramolecular cross-linking, whereas the HM-HEC species show an incipient association and the dextran molecules are unaffected. At longer times, interchain cross-linking of the polymers promoted the growth of large flocs, which were disrupted by shear forces when they were sufficiently large. These findings are novel, and both the building up of aggregates and disaggregation are well substantiated by the SALS results.     

Rheological Study on Polypropylene/Cycloolefin Copolymer Blends

Summary: Polypropylene, cycloolefin copolymer and their blends were characterized by means of melt flow analysis and capillary rheometry at temperatures between 190 and 230 °C in order to shed more light on COC fiber formation obtained in injection molding process. Melt viscosity and its activation energy as functions of blend composition show negative deviation from the expected additivity (Negative Deviating Blends). The COC/PP viscosity ratio increases with shear rate, but decreases with temperature. High temperature, low viscosity ratio and high shear rate seem to be favorable for fiber formation. Glass transition (from the reversible heat flow curve of modulated DSC) of dumbbell specimens produced by injection molding at 230 °C with COC minor component was 2–4 °C higher than that of grinded pellets obtained from mixing at 190 °C.     

剪切流场诱导iPP等温结晶行为的研究

利用流变学方法研究了剪切诱导等规聚丙烯(iPP)的等温结晶行为.在稳态剪切流场作用下,结晶初期的法向压应力和粘度基本为一定值,一定时间后,会出现增大并迅速上升的现象.在高剪切速率下,与粘度相比较,法向压应力突变的时间要早;剪切速率减小,二者趋于一致;当剪切速率很低时,法向压应力的值很小且超出了仪器的量程,只有粘度的值是可信的.针对该现象提出了一种新的结晶速率表征法,即利用法向压应力和粘度二者中较早的突变时间表征结晶诱导时间(ton).诱导应变γ=.γ.ton,q是决定剪切影响结晶行为的一个无量纲参数,可以将不同温度下的结晶诱导时间曲线组合成一条主曲线.     

Combinations of microphase separation and terminal multiple hydrogen bonding in novel macromolecules

The synthesis and characterization of terminal multiple hydrogen-bonded (MHB) polymers, such as poly(styrene) (PS), poly(isoprene) (PI), and microphase separated PS-b-PI block copolymers, possessing controlled molecular weights and narrow molecular distributions are described. Hydroxyl-terminated polymeric precursors were prepared using living anionic polymerization and subsequent quantitative termination with ethylene oxide. MHB polymers were synthesized in a controlled fashion via end-group modification of these well-defined macromolecular alcohols with excess isophorone diisocyanate and subsequent derivatization of the isocyanate-terminated polymeric intermediate with methyl isocytosine. The glass transition temperatures of the terminal MHB polymers were reproducibly higher than both nonfunctionalized and hydroxyl-terminated polymers at nearly equivalent number average molecular weights. Thin-layer chromatography analysis indicated that the interaction of terminal MHB polymers with silica was stronger as compared to both nonfunctionalized and hydroxyl-terminated polymers. Rheological characterization indicated that the melt viscosity at constant shear rate for various MHB polymers was more than 100 times higher than those for nonfunctionalized and hydroxyl-terminated polymers. Interestingly, the melt viscosity of MHB polymers was higher than those of nonfunctionalized polymers with twice the number average molecular weight. In addition, DSC and rheological characterization also suggested that terminal MHB polymers formed aggregates and not simple dimers in the melt state, and the aggregates were observed to completely dissociate at 80 degrees C.     

Interaction of sodium cholate with dioctadecyldimethylammonium chloride vesicles in aqueous dispersion

Mixtures of dioctadecyldimethylammonium chloride (DODAC) cationic vesicle dispersions with aqueous micelle solutions of the anionic sodium cholate (NaC) were investigated by differential scanning calorimetry, DSC, turbidity and light scattering. Within the concentration range investigated (constant 1.0 mM DODAC and varying NaC concentration up to 4 mM), vesicle → micelle → aggregate transitions were observed. The turbidity of DODAC/NaC/water depends on time and NaC/DODAB molar concentration ratio R. At equilibrium, turbidity initially decreases smoothly with R to a low value (owing to the vesicle–micelle transition) when R = 0.5–0.8 and then increases steeply to a high value (owing to the micelle–aggregate transition) when R = 0.9–1.0. DSC thermograms exhibit a single and sharp endothermic peak at T_m ≈ 49 °C, characteristic of the melting temperature of neat DODAC vesicles in water. Upon addition of NaC, T_m initially decreases to vanish around R = 0.5, and the main transition peak broadens as R increases. For R > 1.0 two new (endo- and exothermic) peaks appear at lower temperatures indicating the formation of large aggregates since the dispersion is turbid. All samples are non-birefringent. Dynamic light scattering (DLS) data indicate that both DODAC and DODAC/NaC dispersions are highly polydisperse, and that the mean size of the aggregates tends to decrease as R increases.     

The sticking probability for H2 on some transition metals at a hydrogen pressure of 1 bar

The sticking probability for hydrogen on films of Co, Ni, Cu, Ru, Rh, Pd, Ir, and Pt supported on graphite has been measured at a hydrogen pressure of 1 bar in the temperature range 40-200 degrees C. The sticking probability is found to increase in the order Ni, Co, Ir, Pd, Pt, Rh, and Ru at temperatures below 150 degrees C, whereas at higher temperatures, the sticking probability for Pd is higher than for Pt. The sticking probability for Cu is below the detection limit of the measurement. The measured sticking probabilities are slightly lower than those obtained at high hydrogen coverage under ultrahigh vacuum conditions. This could be a consequence of the higher hydrogen pressure used here. The apparent desorption energies extracted from the steady-state desorption rate are found to agree reasonably well with published values for the heat of adsorption at high coverage. However, the sticking probability is not related in a simple way to published values for the heat of adsorption at low coverage, with Ru and Rh giving exceptionally high values for the sticking probability. It is suggested that this is due to the presence of adsorption sites with very low desorption energy on Ru and Rh.     

Self-assembly of stimuli-responsive water-soluble [60]fullerene end-capped ampholytic block copolymer

A well-defined, water-soluble, pH and temperature stimuli-responsive [60]fullerene (C(60)) containing ampholytic block copolymer of poly((methacrylic acid)-block-(2-(dimethylamino)ethyl methacrylate))-block-C(60) (P(MAA-b-DMAEMA)-b-C(60)) was synthesized by the atom transfer radical polymerization (ATRP) technique. The self-assembly behavior of the C(60) containing polyampholyte in aqueous solution was characterized by potentiometric and conductometric titration, dynamic light scattering (DLS), and transmission electron microscopy. This amphiphilic mono-C(60) end-capped block copolymer shows enhanced solubility in aqueous medium at room and elevated temperatures and at low and high pH but phase separates at intermediate pH between 5.4 and 8.8. The self-assembly of the copolymer is different from that of P(MAA-b-DMAEMA). Examination of the association behavior using DLS revealed the coexistence of unimers and aggregates at low pH at all temperatures studied, with the association being driven by the balance of hydrophobic and electrostatic interactions. Unimers and aggregates of different microstructures are also observed at high pH and at temperatures below the lower critical solution temperature (LCST) of PDMAEMA. At high pH and at temperatures above the LCST of PDMAEMA, the formation of micelles and aggregates coexisting in solution is driven by the combination of hydrophobic, electrostatic, and charge-transfer interactions.     

Electrostatically driven protein aggregation: beta-lactoglobulin at low ionic strength

The aggregation of beta-lactoglobulin (BLG) at ambient temperature was studied using turbidimetry and dynamic light scattering in the range 3.8相似文献   

Dynamics of analyte binding onto a metallophthalocyanine: NO/FePc

The gas-surface reaction dynamics of NO impinging on an iron(II) phthalocyanine (FePc) monolayer were investigated using King and Wells sticking measurements. The initial sticking probability was measured as a function of both incident molecular beam energy (0.09-0.4 eV) and surface temperature (100-300 K). NO adsorption onto FePc saturates at 3% of a monolayer for all incident beam energies and surface temperatures, suggesting that the final chemisorption site is confined to the Fe metal centers. At low surface temperature and low incident beam energy, the initial sticking probability is 40% and decreases linearly with increasing beam energy and surface temperature. The results are consistent with the NO molecule sticking onto the FePc molecules via physisorption to the aromatics followed by diffusion to the Fe metal center, or precursor-mediated chemisorption. The adsorption mechanism of NO onto FePc was confirmed by control studies of NO sticking onto metal-free H2Pc, inert Au111, and reactive Al111.     

Preparation and rheological characterization of poly(n-butyl methacrylate)/montmorillonite composites

Intercalated nanocomposites constituted of poly(butyl methacrylate) (PBMA) as the matrix and an organically modified montmorillonite as the nanosize filler were prepared and rheologically characterized in detail. The rheological behavior of the composites showed dependence on both temperature and clay content. For composites of low clay contents, the steady shear viscosity showed a Newtonian plateau in the low shear rate region at low temperatures and the plateau was replaced by a shear-thinning curve when the temperature was raised. For composites of higher clay contents, strong shear-thinning behavior were observed at all shear rates and all temperatures. The viscoelastic data of the composites showed unusual terminal behavior of a decreasing terminal slope at low frequencies with increasing temperature and clay loading. X-ray diffraction spectra showed that annealing process at higher temperatures shifted the Bragg reflection peaks to a lower angle and broadened the peaks, which provided the evidence for the existence of a temperature-induced solid-like structure that was responsible for the shear thinning and the unusual terminal viscoelastic behavior.