对象散全息元件产生的正交象散特性的研究

本文从理论上分析了用全息方法制作具有象散特征的一种光学元件——象散全息元件——的可能性,并得到实验上的证明.对由象散全息元件在空间正交方向上产生的象散特性作了较为仔细的研究,给出了实验结果.若用此元件代替普通象散系统,将具有使用方便,经济等优点.     

计算机产生全息光学元件用于校正椭圆高斯激光束

本文讨论了计算机产生全息光学元件,用以校正椭圆高斯激光束,计算这个全息光学元件的详细数学方程已作了推导,由计算机控制绘图机绘制了全息图,缩制了全息光学元件,并得出了实验结果。 关键词：     

体全息光学元件布拉格偏移特性的研究及其应用

本文研究了体全息光学元件的布拉格(Bragg)偏移及补偿特性,得出了在某些调制度下,在偏移布拉格条件下仍可以得到较高的衍射效率的结论.文中也讨论了体全息光学元件布拉格偏移的容忍性并分别讨论了体全息元件布拉格偏移所允许的角度偏移和再现波波长偏移的性质,得出了在大调制度下体全息光学元件的布拉格偏移容忍性大的结论.同时指出实现体全息光学元件高衍射效率的变波长再现的途径,并给出相应的实验结果.     

光致聚合物全混洗光互连全息元件的制备

采用只对红光敏感的光致聚合物全息干版通过 Ｈｅ－Ｎｅ ６３２ｎｍ激光波长两次掩膜曝光,在面积为３０ｍｍ × ６０ｍｍ的全息干版上制备出全息光学元件,并成功地用于全混洗光学互连的实验演示。全息光学元件的衍射效率为 ４０～ ５２％。     

用变形全息透镜实现变形分数傅里叶变换

利用一发散点光源和一束倾斜平行光制作出在两个垂直方向上具有不同焦距的变形全息透镜,且用此全息元件实现了变形分数傅里叶变换。变形全息透镜两个方向上的焦距随全息记录条件和再现条件而变化,分析了用这种全息透镜实现变形分数傅里叶变换的条件。实验表明,用该元件能够方便地实现任意级次的变形分数傅里叶变换。     

振幅型复合计算全息模式波前传感理论及验证

全息模式波前传感器是利用复合全息元件对待测波前中像差模式进行直接测量的一种新型波前传感器,其中的复合全息元件可编码设计多阶Zernike像差模式。提出一种有效方案以编码设计振幅型复合计算全息元件,该方案通过将多个编码有某阶Zernike像差模式的透过率调制扭曲光栅叠加产生振幅型计算全息元件。在小像差近似条件下推导了传感器输出信号与Zernike像差模式系数的解析关系。编码设计了振幅型复合全息图,并研究了其对单阶和多阶Zernike像差模式的探测性能。利用液晶光阀加载复合全息图进行了验证实验。所得实验结果与数值模拟结果基本一致。     

用于全息存贮的全息散斑相移透镜

本文利用全息透镜和激光散斑的特性,提出一种专门用于信息存贮的全息散斑相移透镜。并给出了这种平面型光学元件的制作过程及实验结果。     

用全息透镜组成傅里叶变换系统

本文将全息透镜作为一般的傅里叶变换元件,组成傅里叶交换系统,进行了相关运算以及模糊图象处理等实验.结果表明,对全息透镜傅里叶变换系统进行某些光学信息处理工作是可行的.     

用多焦点全息透镜实现多重谱分数傅里叶变换

提出用多焦点全息透镜实现多重谱分数傅里叶变换.利用全息方法通过一次曝光制作出多焦点的全息透镜,分析了用此全息元件实现这种变换的条件,并在实验上实现了多重谱分数傅里叶变换. 实验结果表明这种变换方法简便可行,可广泛应用于多通道光学信息处理系统及多目标图像识别系统中.     

全息光学元件递推制作的数学模型

用递推制作方法可制作出像质优良的全息光学元件。首先用球面光路系统产生球面参考波,制作一块中间全息元件,然后用这块中间全息元件产生非球面参考波,制作出最终全息元件。本文阐述全息光学元件递推制作的数学摸型。     

Reflection and transmission of Laguerre Gaussian beam from uniaxial anisotropic multilayered media

Based on angular spectrum expansion and 4 × 4 matrix theory, the reflection and transmission characteristics of a Laguerre Gaussian(LG) beam from uniaxial anisotropic multilayered media are studied. The reflected and transmitted beam fields of an LG beam are derived. In the case where the principal coordinates of the uniaxial anisotropic media coincide with the global coordinates, the reflected and transmitted beam intensities from a uniaxial anisotropic slab and three-layered media are numerically simulated. It is shown that the reflected intensity components of the incident beam, especially the TM polarized incident beam, are smaller than the transmitted intensity components. The distortion of the reflected intensity component is more evident than that of the transmitted intensity component. The distortion of intensity distribution is greatly affected by the dielectric tensor and the thickness of anisotropic media. We finally extend the application of the method to general anisotropic multilayered media.     

Reflection and transmission of an Airy beam in a dielectric slab

The reflection and transmission of a finite-power Airy beam incident on a dielectric slab are investigated by an analytical method. Based on the plane-wave angular spectrum expansion and Fresnel approximation, the analytical expressions of the reflected field, internal field as well as transmitted field in each region are obtained. Through numerical simulations, the intensity distributions of the incident beam, reflected beam, internal beam as well as transmitted beam are presented at oblique incidence. Besides, we also compare the intensity distributions of the geometrical-optics beam field, the first order beam mode field and the actual beam field, which indicates that the contribution of each order beam mode field to the actual beam field is related to the refractive index of the dielectric slab. Meanwhile, the reflection characteristics of the Airy beams in the special cases of Brewster incidence and total reflection are investigated. Finally, the effects of the optical thickness and refractive index of the dielectric slab on the peak intensity distributions and beam shifts of the reflected and transmitted beams are also discussed in detail. The analytical and numerical results will be useful to analyze the propagation dynamics of Airy beam in the dielectric slab and provide some theoretical supports to the design of optical film.     

Propagation of a filamentary femtosecond laser beam with high intensities at an air-solid interface

The propagation of a filamentary laser beam at an air-glass surface is studied by setting the incident angle satisfying the total reflection condition. The images of the trajectory of the filamentary laser beam inside the sample and the output far-field spatial profiles are measured with varying incident laser pulse energies. Different from the general total reflection, a transmitted laser beam is detected along the propagation direction of the incident laser beam. The energy ratio of the transmitted laser beam depends on the pulse energies of the incident laser beam. The background energy reservoir surrounding the filament core can break the law of total reflection at the air-glass surface, resulting in the regeneration of the transmitted laser beam.     

Nonlinear reflection of a femtosecond spectral supercontinuum

The spatio-temporal spectrum of optical radiation reflected from a nonlinear dielectric medium with nonresonant dispersion is obtained as a function of the parameters of the spatio-temporal spectrum of a paraxial light beam incident on the boundary of the medium at small angles. Nonlinear reflection of various types of femtosecond spectral supercontinua from the interface between air and fused silica is simulated. It is shown that the time duration and the transverse dimensions of a beam of multiple-frequency radiation generated during the reflection of a superposition of high-intensity fields of two few-cycle pulses with different central wavelengths may be smaller than those of incident ultrashort pulses.     

Total-internal-reflection mode in holographic polymer dispersed liquid crystals

We have developed a holographic polymer dispersed liquid-crystal device based on total internal reflection (TIR). In the field-off state, the holographic planes are slanted such that the angle of the diffraction beam is beyond the TIR angle of the glass substrate. The beam is trapped in the sample and propagates to the edge. In the field-on state, the holographic grating is erased and the incident beam propagates directly through the sample. Contrast ratios of 10 dB, submillisecond response times, and an index modulation of 0.042 at 1550 nm are reported.     

Diffraction properties of ultrashort pulsed beams with arbitrary temporal profiles by a reflection volume holographic grating

The diffraction properties of reflection volume holographic gratings are studied when the gratings are illuminated by an ultrashort beam with arbitrary temporal profiles. The modified Kogelnik's theory of coupled waves is used. Simple analytical expressions for spectral and temporal distribution of the transmitted and diffracted are obtained. The dependences of the diffraction bandwidth, the Bragg selectivity bandwidth and the total diffraction efficiency of the reflection volume grating on the temporal profiles of the input ultrashort pulse are investigated. Study shows that the bandwidth of the reflection volume holographic gratings varies with the grating parameters more slowly than the transmitting volume holographic gratings. For three different temporal profiles, numerical results about diffraction properties of the reflection volume holographic gratings are given and compared with the transmitting volume holographic gratings.     

涡旋光束在反射中的正交偏振特性研究

本文从角谱理论出发建立了涡旋光束在空气-玻璃界面反射时的傍轴传输模型, 并研究了反射过程中诱导产生的正交偏振效应. 当一水平偏振涡旋光束以不同角度入射时, 反射光束的正交偏振分量呈现出类似于一阶厄米-高斯模式的双峰强度分布, 而水平偏振分量强度分布呈现与入射光束相似的分布, 且只在布儒斯特角附近入射时才现出与正交偏振分量垂直的双峰分布. 对于任意线偏振入射光, 其正交偏振分量的偏振方向不再垂直于入射时的偏振方向, 而是与反射光束的中心波矢垂直, 此时正交偏振分量出现有趣的旋转特性, 其物理原因归结于任意线偏振光入射时所对应的水平与垂直偏振分量的反射系数不同. 最后进行了相关实验验证, 发现实验结果与理论分析符合得较好. 关键词： 正交偏振 涡旋光束 任意线偏振     

固-固界面退化特性的超声反射评价方法

提出了一种基于有限宽超声束反射的固-固界面退化特性评价方法,从理论和数值仿真角度进行了分析和计算。将两固体界面间的薄层简化为界面弹簧模型,以界面法向和切向劲度系数表征界面的退化程度。通过数值计算求得有限宽超声纵波束在不同入射角和界面不同退化程度下的反射横波、反射纵波的镜面反射系数。进一步地,通过建立二维有限元模型,仿真研究了有限宽超声纵波束在给定入射角及界面不同退化程度下镜面反射系数的变化规律。结果表明,反射纵波和反射横波的镜面反射系数随有限宽超声纵波束的入射角及界面劲度系数的改变而变化,且存在镜面反射系数随界面劲度系数单调且敏感变化的入射角,据此可准确评价界面的退化程度。     

具有不同涂层的样品表面双向反射分布函数的三维测量

利用半球空间双向反射分布函数测量装置,采用样本比值法,实验测量了不同材质及涂层表面对激光束在整个半球空间内的双向反射分布函数.分析了漫反射板与无涂层铝板（裸板）表面,以及不同涂层和不同入射角下同一涂层对入射光的反射光强的空间分布,得出了所测几种样品在特定波长激光照射下的表面反射与散射特性.     

Internal reflection of one-dimensional bright spatial solitons

We study the reflection of one-dimensional spatial solitons at the non-linear interface between a Kerr-type medium and a linear medium. Our study places emphasis on determining the physical conditions under which the beam reflected by the non-linear interface is still a spatial soliton. We find that for small angles of incidence an elastic internal reflection takes place, in the sense that the reflected soliton is essentially the same as the incident one. For incidence angles near a critical angle, the reflected soliton becomes less intense and its reflection angle is smaller than the angle of incidence. Finally, for spatial solitons with input angles well above the critical angle, the main part of the energy is transmitted to the linear medium, and no soliton is internally reflected.