The synthesis of cyclic polymers by olefin metathesis: Achievements and challenges

Cyclic polymers have drawn considerable interest for their peculiar physical properties in comparison to linear polymers, despite their equivalent compositions. Synthetically, cyclic polymers can be accessed through either macrocyclic ring‐closure or by ring‐expansion polymerization, but the main challenge with either method is the production of highly pure cyclic polymer samples. This highlight describes advances in the area of cyclic polymer synthesis, with a particular focus on ring‐expansion metathesis polymerization. Methods for characterizing cyclic polymers and assessing their purity are also discussed in order to emphasize the need for additional robust and reliable methods for synthesizing and studying topologically complex macromolecules. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 228–242     

Convenient synthesis of [3]catenane by olefin metathesis dimerizations

[3]Catenane 5a and 5b were synthesized conveniently by olefin metathesis dimerization of pseudorotaxanes 3a and 3b. The yields of 5a and 5b were influenced by concentrations of 3a and 3b, and a ring size of a center wheel of [3]catenane.     

Synthesis of cyclic olefin polymers with high glass transition temperature by ring‐opening metathesis copolymerization and subsequent hydrogenation

Novel cyclic olefin polymers (COPs) derived from bulky cyclic olefin, exo‐1,4,4a,9,9a,10‐hexahydro‐9,10(1′,2′)‐benzeno‐l,4‐methanoanthracene (HBMN), with high glass transition temperature (T_g), excellent thermal stability, high transparency, and improved mechanical performance, have been achieved by ring‐opening metathesis polymerization and subsequent hydrogenation. The “first‐generation Grubbs” catalyst, RuCl₂(PCy₃)₂(CHPh) (Cy = cyclohexyl) ( G1 ), displays very high activity for homo/copolymerization with complete conversion. Homopolymer of the HBMN after complete hydrogenation showed a highest T_g of 223.6 °C. Copolymerization of HBMN with tricyclo[4.3.0.12,5]deca‐3‐ene or 5‐n‐hexylnorbornene was also carried out. These two series of COPs were characterized by gel permeation chromatography, nuclear magnetic resonance, differential scanning calorimetry, and thermogravimetric analysis. The T_g of the resulted COPs linearly increased with HBMN content, which is easily controlled by changing feed ratios. The tensile test indicates that these copolymers have good mechanical performance as all these copolymers show a higher strain at break compared with commercial products (TOPAS^®). © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2654‐2661     

New synthesis of 3-cyclopentenecarboxylic acid esters by olefin metathesis

Olefin metathesis of diallylacetic acid esters is proposed for the synthesis of 3-cyclopentenecarboxylic acid esters. WCl₆-organosilicon compounds are used as homogeneous catalysts.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1503–1504, August, 1994.     

Enantioselective synthesis of [7]helicene: dramatic effects of olefin additives and aromatic solvents in asymmetric olefin metathesis

The asymmetric synthesis of [7]helicene was accomplished in good ee (80%) by kinetic resolution by means of asymmetric olefin metathesis. Three key factors contributed to the success of the kinetic resolution: the use of new Ru-based olefin metathesis catalysts bearing C1-symmetric N-heterocyclic carbene ligands, simple olefins as additives to control the nature of the propagating alkylidene and hexafluorobenzene as a solvent.     

Refining of plant oils to chemicals by olefin metathesis

Plant oils are attractive substrates for the chemical industry. Their scope for the production of chemicals can be expanded by sophisticated catalytic conversions. Olefin metathesis is an example, which also illustrates generic issues of "biorefining" to chemicals. Utilization on a large scale requires high catalyst activities, which influences the choice of the metathesis reaction. The mixture of different fatty acids composing a technical-grade plant oil substrate gives rise to a range of products. This decisively determines possible process schemes, and potentially provides novel chemicals and intermediates not employed to date.     

Template synthesis of a huge macrocycle by olefin metathesis using easily accessible [Pt(PEt(3))(2)] templates

We have reported the template synthesis of a 90-membered macrocycle by olefin metathesis. The macrocycle 7 was prepared by an initial six-oxidative-addition reaction of 2 by [Pt(PEt(3))(4)]. The definite structure of a six-oxidative product was confirmed by the crystal structure. The coordination of 2,6-bis(hex-5-enyloxy)pyridine to 3 led to the hexacationic aryl complex of type 4. The metathesis of olefin-substituted pyridine with Grubbs catalyst ([PhCH==RuCl(2)(Cy(3)P)(2)]) formed the expected macrocycle 5. The olefin metathesis reaction was formed under high dilution to suppress intermolecular olefin metathesis polymerization. The detachment of the newly formed macrocycle 6, followed by reduction to alkane macrocycle 7 by using palladium on charcoal and hydrogen led to a huge macrocycle. The mild and easy access of the template protocol opens a host of potential subsequent transformations toward the construction of a variety of macrocycles.     

Synthesis of 7-deoxypancratistatin from carbohydrates by the use of olefin metathesis

The stereocontrolled synthesis of (+)-7-deoxypancratistatin is described. The convergent synthesis has been achieved by two different strategies, both of which commence from a pentose and piperonal. The latter is converted into allylic bromide 7, which is then coupled with a protected methyl 5-deoxy-5-iodo-D-ribofuranoside in the presence of zinc metal. The first strategy involves a total of only 13 steps from D-ribose and piperonal, but suffers from a low yield in the zinc-mediated reaction between ribofuranoside 9, benzylamine, and bromide 7. The second strategy involves a total of 18 steps from D-xylose and piperonal. The former is converted into ribofuranoside 28, which is coupled with bromide 7 in the presence of zinc, and this is followed by ring-closing olefin metathesis. Subsequent Overman rearrangement, dihydroxylation, and deprotection then affords the natural product.     

Synthesis of novel cyclic olefin polymers with excellent transparency and high glass‐transition temperature via gradient copolymerization of bulky cyclic olefin and cis‐cyclooctene

Novel cyclic olefin polymers (COPs) with excellent transparency and high glass‐transition temperature (T_g) synthesized from bulky norbornene derivative, exo‐1,4,4a,9,9a,10‐hexahydro‐9,10(1',2')‐benzeno‐l,4‐methanoanthracene (HBMN), and cis‐cyclooctene (COE) by ring‐opening metathesis copolymerization utilizing the “first‐generation Grubbs” catalyst, RuCl₂(PCy₃)₂(CHPh), and subsequent hydrogenation was reported herein. To get amorphous copolymers, it was of great importance to control the feed ratios and the polymerization time for gradient copolymerization. All these copolymers showed very high T_gs (141.1–201.2 °C), which varied with the content of HBMN. The films of the gradient copolymers with only one T_g were highly transparent. On the contrary, all the block copolymers synthesized through sequential addition showed two thermal transition temperatures, T_g and melt temperature (T_m), and the films of these block copolymers were opaque. The mechanical performances of the COPs were also investigated. It is the first report that transparent COP could be prepared from bulky norbornene derivative and monocyclic olefin. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3240–3249     

Ruthenium-based olefin metathesis catalysts coordinated with unsymmetrical N-heterocyclic carbene ligands: synthesis, structure, and catalytic activity

A series of ruthenium-based olefin metathesis catalysts coordinated with unsymmetrical N-heterocyclic carbene (NHC) ligands has been prepared and fully characterized. These complexes are readily accessible in one or two steps from commercially available [(PCy(3))(2)Cl(2)Ru==CHPh]. All of the complexes reported herein promote the ring-closing of diethyldiallyl and diethylallylmethallyl malonate, the ring-opening metathesis polymerization of 1,5-cyclooctadiene, and the cross metathesis of allyl benzene with cis-1,4-diacetoxy-2-butene, in some cases surpassing in efficiency the existing second-generation catalysts. Especially in the cross metathesis of allyl benzene with cis-1,4-diacetoxy-2-butene, all new catalysts demonstrate similar or higher activity than the second-generation ruthenium catalysts and, most importantly, afford improved E/Z ratios of the desired cross-product at conversion above 60 %. The influence of the unsymmetrical NHC ligands on the initiation rate and the activation parameters for the irreversible reaction of these ruthenium complexes with butyl vinyl ether were also studied. Finally, the synthesis of the related chlorodicarbonyl(carbene) rhodium(I) complexes allowed for the study of the electronic properties of the new unsymmetrical NHC ligands that are discussed in detail.     

Cross‐metathesis functionalized exo‐olefin derivatives of lactide

Poly(lactic acid) is at the forefront of research into alternative replacements to fossil fuel derived polymers, yet preparation of derivatives of this key biodegradable polymer remain challenging. This article explores the use of two derivatives of lactide, each of which features an exocyclic olefin, and their pre‐polymerization modification by olefin cross‐metathesis. Methylenation of lactide with Tebbe's reagent generates a novel 5‐methylenated lactide monomer, (3S,6S)‐3,6‐dimethyl‐5‐methylene‐1,4‐dioxan‐2‐one, complementing the previously reported 3‐methylenated (6S)‐3‐methylene‐6‐methyl‐1,4‐dioxan‐2,5‐dione. While ring‐opening of each monomer is not productive, olefin cross‐metathesis can be used to functionalize each of the exocyclic olefins to produce a family of monomers. The ring‐opening polymerization of these new monomers, and their hydrogenated congeners, is facilitated by organo‐ and Lewis‐acid catalysts. Together, they offer a new strategy for derivatizing and altering the properties of poly(lactic acid). © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 741–748     

Mechanistic insights into the cis-trans isomerization of ruthenium complexes relevant to catalysis of olefin metathesis

The mechanism of the trans to cis isomerization in Ru complexes with a chelating alkylidene group has been investigated by using a combined theoretical and experimental approach. Static DFT calculations suggest that a concerted single‐step mechanism is slightly favored over a multistep mechanism, which would require dissociation of one of the ligands from the Ru center. This hypothesis is supported by analysis of the experimental kinetics of isomerization, as followed by ¹H NMR spectroscopy. DFT molecular dynamics simulations revealed that the variation of geometrical parameters around the Ru center in the concerted mechanism is highly uncorrelated; the mechanism actually begins with the transformation of the square‐pyramidal trans isomer, with the Ru?CHR bond in the apical position, into a transition state that resembles a metastable square pyramidal complex with a Cl atom in the apical position. This high‐energy structure collapses into the cis isomer. Then, the influence of the N‐heterocyclic carbene ligand, the halogen, and the chelating alkylidene group on the relative stability of the cis and trans isomers, as well as on the energy barrier separating them, was investigated with static calculations. Finally, we investigated the interconversion between cis and trans isomers of the species involved in the catalytic cycle of olefin metathesis; we characterized an unprecedented square‐pyramidal metallacycle with the N‐heterocyclic carbene ligand in the apical position. Our analysis, which is relevant to the exchange of equatorial ligands in other square pyramidal complexes, presents evidence for a remarkable flexibility well beyond the simple cis–trans isomerization of these Ru complexes.     

Syntheses and characterization of molecular weight enlarged olefin metathesis pre-catalysts

This study was aimed at developing a synthetic strategy of gradual increase in the steric bulk of ruthenium-based olefin metathesis pre-catalysts for organic solvent nanofiltration (OSN) processes. A series of five enlarged second-generation Hoveyda type pre-catalysts was prepared and characterized. The structural modifications were performed on the benzylidene ligand of an unmodified Hoveyda (II) pre-catalyst. The catalytic activity of the catalysts was evaluated in a model reaction of ring closing metathesis (RCM). All enlarged catalysts showed good stabilities and activities comparable to those of the unmodified Hoveyda II pre-catalyst. Cross-flow nanofiltration of these catalysts exhibited very high retentions (up to 98.5%) confirming the potential of structural modifications coupled with OSN for efficient catalysts separation.     

Synthesis,characterization, and thin‐film properties of 6‐oxoverdazyl polymers prepared by ring‐opening metathesis polymerization

Redox‐active 6‐oxoverdazyl polymers were synthesized via ring‐opening metathesis polymerization (ROMP) and their solution, bulk, and thin‐film properties investigated. Detailed studies of the ROMP method employed confirmed that stable radical polymers with controlled molecular weights and narrow molecular weight distributions (Ð < 1.2) were produced. Thermal gravimetric analysis of a representative example of the title polymers demonstrated stability up to 190 °C, while differential scanning calorimetry studies revealed a glass transition temperature of 152 °C. Comparison of the spectra of 6‐oxoverdazyl monomer 12 and polymer 13 , including FT‐IR, UV‐vis absorption, and electron paramagnetic resonance spectroscopy, was used to confirm the tolerance of the ROMP mechanism for the 6‐oxoverdazyl radical both qualitatively and quantitatively. Cyclic voltammetry studies demonstrated the ambipolar redox properties of polymer 13 (E_1/2,ox = 0.25 and E_1/2,red = ?1.35 V relative to ferrocene/ferrocenium), which were consistent with those of monomer 12 . The charge transport properties of thin films of polymer 13 were studied before and after a potential of 5 V was applied, revealing a drastic drop in the resistivity from 10⁶?10¹⁰ Ω m or more to 1.7 × 10⁴ Ω m and suggesting the potential usefulness of polymer 13 in bistable electronics. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1803–1813     

A Molecular modeling study of the changes of some steric properties of the precatalysts during the olefin metathesis reaction

The productive self‐metathesis of 1‐octene with a series of new phosphine ligated Grubbs‐type precatalysts was studied. The resulting structures were used to compare some steric properties of the new precatalysts with those of well‐known precatalysts. The possibility of α‐CC agnostic stabilization as well as the ability of the ligands to shield the metal was studied. A comparison of the obtained data, pointed to the unlikelihood that α‐CC agostic stabilization is a major contribution to the stabilization of the various metallacyclobutane rings. The similarity in the ability of the ligands to shield the metal also raised questions about the comparison of experimentally observed trends with those obtained theoretically. © 2014 Wiley Periodicals, Inc.     

A Supramolecular Strategy for the Synthesis of Cyclic Oligomers and Polymers by Ring Expansion

Ring-opening metathesis polymerization (ROMP) of strained macrocycles is a key method to prepare diverse polymers. However, lack of ring strain in most macrocycles is an impediment to polymerization. In this paper, the polymerization/oligomerization of unstrained macrocycles was achieved using a supramolecular approach, leading selectively to cyclic products. Diphenyl thiourea and other guest molecules were used as additives to the ROMP reaction of unstrained macrocycles. An intermediate host-guest complex leads to the stabilization of the open form of the macrocycle after treatment with Grubbs catalysts, thereby favoring polymerization by inhibiting the ring-closing reaction back to the monomer. This proof-of-concept enables ring-expansion polymerization of unstrained macrocycles leading to cyclic polymers with molecular weights up to 6700 Da.     

Synthesis of substituted benzenes and phenols by ring-closing olefin metathesis

New synthetic approaches to substituted aromatic compounds are reported. Ring-closing olefin metathesis (RCM)/dehydration and RCM/tautomerization are the key processes in the synthesis of substituted benzenes 3 and phenols 6, respectively. Readily accessible 1,5,7-trien-4-ols 7, which are the precursors of benzenes, were prepared from beta-halo-alpha,beta-unsaturated aldehydes 11 or beta-halo-alpha,beta-unsaturated esters 19 by utilizing reliable transformations in which cross-coupling with vinylic metal reagents 12 and allylation with allylic metal reagents 13 were employed as carbon-carbon bond forming reactions. RCM of 7, followed by dehydration, afforded a wide variety of substituted benzenes 3. In addition, RCM of 1,5,7-trien-4-ones 9, which were prepared by oxidation of 7, furnished various substituted phenols 6 by automatic tautomerization.     

Homodimerization of hyaluronan and heparan sulfate derivatives by olefin metathesis reaction

Hyaluronan and heparan sulfate disaccharides of the type β-d-glucuronic acid-(1→3)-N-acetyl-β-d-glucosamine and α-l-iduronic acid-(1→4)-N-acetyl-β-d-glucosamine, respectively, with an n-pentenyl group at the reducing end have been synthesized. Homodimerization of these derivatives using Grubbs catalyst furnished dimerized disaccharides separated by a C₈ spacer arm.