Fluorescence Sensing and Selective Binding of a Novel 4,4′‐Sulfonyldianiline‐Bridged Bis(β‐cyclodextrin) for Bile Salts

A novel 4,4′‐sulfonyldianiline‐bridged bis(β‐cyclodextrin (CD)) 2 was synthesized, and its complex stability constants (K_s) for the 1 : 1 inclusion complexation with bile salts, i.e., cholate (CA), deoxycholate (DCA), glycocholate (GCA), and taurocholate (TCA) have been determined in phosphate buffer (pH 7.2) at 25° by fluorescence spectroscopy. The result indicated that 2 can act as efficient fluorescent sensor and display remarkable fluorescence enhancement upon addition of optically inert bile salts. Structures of the inclusion complexes between bile salts and 2 were elucidated by 2D‐NMR experiments, indicating that the anionic tail group and the D ring of bile salts penetrate into one CD cavity of 2 from the wide opening deeply, while the phenyl moiety of the CD linker is partially self‐included in the other CD cavity to form a host–linker–guest binding mode. As compared with native β‐CD 1 upon complexation with bile salts, bis(β‐CD) 2 enhances the binding ability and molecular selectivity. Typically, 2 gives the highest K_s value of 26200 M ^?1 for the complexation with CA, which may be ascribed to the simultaneous contributions of hydrophobic, H‐bond, and electrostatic interactions. These phenomena are discussed from the viewpoints of multiple recognition and induce‐fit interactions between host and guest.     

Mass spectrometric investigations of α‐ and β‐cyclodextrin complexes with ortho‐, meta‐ and para‐coumaric acids by negative mode electrospray ionization

The mass spectrometric characterization of aqueous solutions of α‐ and β‐cyclodextrins (CDs) and o‐, m‐ and p‐coumaric acids (CAs) by negative ion electrospray ionization (ESI) indicates that the [CD+CA]^? ions were sourced from the inclusion complex present in solution and from the anion attached to CD molecules formed in the spray processes. The anion adducts formed in the spray process contribute significantly to the signal intensity of an ionized inclusion complex thus overestimating the calculated stability constant (K) of solution‐phase complexes by one to two orders of magnitude. The relative intensities of anion adducts in mass spectra depend on the concentration ratio of the anion and the CD in spray droplets, while the relative intensity of the ionized inclusion complex depends on CD and CA concentrations in solutions and the value of K. Ion Mobility Spectrometry Mass Spectrometry [IMS‐MS] measurements show that the collision cross‐section (Ω) values of the [CD+CA]^? or [(CD)₂₊CA]^2? and [CD+CA] complex ions are 5–6% larger than or equal to CD^? or [CD], respectively. Therefore, in the gas phase the anion adducts [CD+CA^?] on cyclodextrin molecules possess the same conformations as the ionized inclusion complexes [CD+CA]^?. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis,characterization and release profiles of nanoparticles self‐assembled from poly (PEGMA‐co‐MMA‐co‐acryloyl‐β‐CD) copolymers

A novel amphiphilic copolymer was synthesized from poly (ethylene glycol) methyl ether methacrylate (PEGMA950), methyl methacrylate (MMA) and acryloyl‐β‐cyclodextrin (acryloyl‐β‐CD) using the composites of (NH₄)₂S₂O₈/NaHSO₃ as the oxidation–reduction initiators. The successful fabrication of poly(PEGMA‐co‐MMA‐co‐acryloyl‐β‐CD) copolymers was confirmed by Fourier transform infrared spectrometer (FTIR), ¹H‐nuclear magnetic resonance (¹H NMR) spectra. The amphiphilic copolymer could self‐assemble into nanoparticles (NPs), and their morphology and particle size distribution were characterized with transmission electron microscopy (TEM), atomic force microscope (AFM) and dynamic light scattering (DLS) methods. Ibuprofen (IBU) was encapsulated in the novel NPs, and the release profiles of IBU were investigated. FTIR and ¹H NMR spectra illustrated that the poly(PEGMA‐co‐MMA‐co‐acryloyl‐β‐CD) copolymers were synthesized without any residual monomers and initiators. TEM and AFM photographs suggested that the obtained NPs were spherical, and the DLS results indicated that the diameter of blank NPs was 157.3 ± 32.7 nm. The IBU release profile showed that the IBU‐loaded NPs had certain pH responsibility. Copyright © 2014 John Wiley & Sons, Ltd.     

A Cyclodextrin Microgel for Controlled Release Driven by Inclusion Effects

Summary: A novel intelligent delivery system based on the environmental dependence of the inclusion effect of β‐cyclodextrin (β‐CD) with guest molecules, using a β‐CD polymer (CDP) microgel as carrier, is proposed. Compared with smart hydrogels, which are driven by the phase‐volume transition, controlled release from the CDP microgel is driven by “host‐guest” inclusion effects. With the pH‐dependent inclusion complexation of methyl orange (MO) with β‐CD as a model system, the behavior of the controlled release of a CDP microgel was tested by changing the pH, showing that the mechanism is reasonable.

Schematic illustration of the pH‐dependent inclusion complexation of MO with β‐CD in the CDP microgel.     

Amino acid‐derived Poly(L‐Lysine) (p(LL)) microgel as a versatile biomaterial: Hydrolytically degradable,drug carrying,chemically modifiable and antimicrobial material

Here, a microgel of poly(_L‐Lysine) (p(LL)) from an amino acid, _L‐Lysine, was synthesized by microemulsion technique using AOT as surfactant in gasoline. The prepared p(LL) microgel was shown to be hydrolytically degradable at pH values of 5.4, 7.4, and 9 in phosphate buffer solution (PBS). The protonated p(LL) microgel was loaded with model drugs such as naproxen and riboflavin and found to release about 80% of loaded naproxen in 180 minutes and 70% of loaded riboflavin in about 120 minutes suggesting the potential of p(LL) microgels to act as fast drug delivery vehicles. Furthermore, p(LL) microgels were chemically modified with 1‐bromoethane (BE), 1‐bromooctane (BO), and 1‐bromoethylamine (BEA) to render antimicrobial capabilities. It was found that protonated p(LL) microgels had 29 ± 1 mm inhibition zone diameter for Pseudomonas aeruginosa ATCC 10145. Furthermore, minimum inhibition concentration (MIC) and minimum bactericidal concentration (MBC) values for Staphylococcus aureus ATCC 6538 were also calculated as 1 and 2.5 mg/mL concentrations, respectively, for protonated p(LL) microgels.     

pH‐ and β‐cyclodextrin‐responsive micelles based on polyaspartamide derivatives as drug carrier

A novel kind of graft polymer poly(aspartic acid)‐ethanediamine‐g‐adamantane/methyloxy polyethylene glycol (Pasp‐EDA‐g‐Ad/mPEG) was designed and synthesized for drug delivery in this study. The chemical structure of the prepared polymer was confirmed by proton NMR. The obtained polymer can self‐assemble into micelles which were stable under a physiological environment and displayed pH‐ and β‐cyclodextrin (β‐CD)‐responsive behaviors because of the acid‐labile benzoic imine linkage and hydrophobic adamantine groups in the side chains of the polymer. The doxorubicin (Dox)‐loaded micelles showed a slow release under physiological conditions and a rapid release after exposure to weakly acidic or β‐CD environment. The in vitro cytotoxicity results suggested that the polymer was good at biocompatibility and could remain Dox biologically active. Hence, the Pasp‐EDA‐g‐Ad/mPEG micelles may be applied as promising controlled drug delivery system for hydrophobic antitumor drugs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1387–1395     

Preparation and characterization of pH‐responsive and thermoresponsive hybrid microgel particles with gold nanorods

We report on pH‐responsive and thermoresponsive hybrid materials based on the assembly of gold nanorods, Au NRs, into multiresponsive, crosslinked copolymer microgel particles. These microgel particles were prepared by the surfactant‐free emulsion polymerization of N‐isopropylacrylamide and acrylic acid using N, N′‐methylene bis‐acrylamide as a crosslinker, which produces particles measuring approximately 160 nm that are interconnected to one other. Cetyltrimethyl ammonium bromide‐stabilized Au NRs were also prepared independently using a seed‐mediated growth method and then loaded into swollen, deprotonated, acrylic acid‐containing microgel particles using the electrostatic interactions between the oppositely charged particles. Transmission electron micrographs of the as‐prepared hybrid Au NR–microgel particles confirmed that the Au NRs were attached to the surface of the microgel particles. The size‐dependent temperature‐responsive characteristics of the hybrid microgel particles were studied by dynamic light scattering, and it was found that as the temperature increased across the phase transition temperature, the particle size decreased to 56% of the original volume. The thermoresponsive and pH‐responsive optical properties of the hybrid microgel particles were also systematically investigated. The thermo‐ and pH‐induced shrinkage of the microgel led to an increase in the UV–vis absorption intensity and caused a significant blue shift in the longitudinal surface plasmon bands of the Au NRs. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Hyperbranched Polyamidoamines Containing β‐Cyclodextrin for Controlled Release of Chlorambucil

This work is focused on the controlled drug release behavior of hyperbranched HPMA in the presence of β‐CD. Hence, three HPMA‐β‐CDs and a pure HPMA were synthesized by Michael addition polymerization. As a model drug, CLB (an anti‐cancer drug) was loaded into them via a solution method for in vitro release studies. The DSC results indicate that the CLB/polymer interactions are at the molecular level. Loading CLB into these polymers results in an evident increase in their glass transition temperatures, and ΔT_g depends on the β‐CD content. The controlled‐release experiments show that the presence of β‐CD can appropriately slow the release of CLB from HPMA‐β‐CDs and adjust the ratio of CLB released in total drug loading.

     

Calcium Phosphate‐Reinforced Photosensitizer‐Loaded Polymer Nanoparticles for Photodynamic Therapy

Calcium phosphate‐reinforced photosensitizer‐loaded polymer nanoparticles have been developed for photodynamic therapy. Chlorin e6 (Ce6)‐loaded core–shell–corona polymer micelles of poly(ethylene glycol)‐b‐poly(L ‐aspartic acid)‐b‐poly(L ‐phenylalanine) ( PEG-PAsp-PPhe ) were employed as template nanoparticles for mineralization with calcium phosphate (CaP). CaP deposition was performed by the electrostatic localization of calcium ions at the anionic PAsp middle shells and the subsequent addition of phosphate anions. CaP‐reinforced nanoparticles exhibited enhanced stability. The CaP mineral layer effectively inhibited Ce6 release from the Ce6‐loaded mineralized nanoparticles (Ce6‐NP‐CaP) at physiological pH value. At an acidic endosomal pH value of 5.0, Ce6 release was enhanced, owing to rapid dissolution of the CaP minerals. Upon irradiation of Ce6‐NP‐CaP‐treated MCF‐7 breast‐tumor cells, the cell viability dramatically decreased with increasing irradiation time. The phototoxicity of Ce6‐NP‐CaP was much higher than that of free Ce6. Non‐invasive optical‐imaging results indicated that Ce6‐NP‐CaP exhibited enhanced tumor specificity compared with free Ce6 and Ce6‐loaded non‐mineralized polymer nanoparticles (Ce6‐NP).     

Synthesis of Dual‐Stimuli‐Responsive Microcontainers with Two Payloads in Different Storage Spaces for Preprogrammable Release

Stimuli‐responsive microcontainers have become a major topic of interest, from fundamental aspects to applications in materials science. However, microcontainers that enable the loading of multiple species and programmable release are mostly unexplored. Herein, we describe the design and synthesis of a dual‐responsive organic/inorganic hybrid microcontainer with two payloads in separate storage spaces that is formed by the rapid UV‐initiated polymerization of Pickering emulsions. The stellate mesopore silica nanoparticles with poly(N ‐isopropylacrylamide) grafted inside the mesopores were loaded with one compound (Nile red) and used as Pickering emulsifiers to stabilize oil‐in‐water droplets. Upon UV irradiation, pH‐responsive monomers were polymerized in the presence of 5(6)‐carboxyfluorescein diacetate (CFDA) to form hybrid colloidal microcontainers. The release of Nile red and CFDA could be selectively activated by changing the temperature or pH value.     

Enantiomeric Separations in Capillary Electrochromatography with Crown Ether‐Capped β‐Cyclodextrin‐Bonded Silica Particles as Chiral Stationary Phase

Two novel types of crown ether capped β‐cyclodextrin (β‐CD) bonded silica, namely, 4′‐aminobenzo‐X‐crown‐Y (X=15, 18 and Y=5, 6, resp.) capped [3‐(2‐O‐β‐cyclodextrin)‐2‐hydroxypropoxy] propylsilyl‐appended silica, have been prepared and used as stationary phases in capillary electrochromatography (CEC) to separate chiral compounds. The two stationary phases have a chiral selector with two recognition sites: crown ether and β‐CD. They exhibit excellent enantioselectivity in CEC for a wide range of compounds. After inclusion of metal ions (Na⁺ or K⁺) from the running buffer into the crown ether units, the stationary phases become positively charged and can provide extra electrostatic interaction with ionizable solutes and enhance the dipolar interaction with polar neutral solutes. This enhances the host‐guest interaction with the solute and improves chiral recognition and enantioselectivity. Due to the cooperation of the anchored β‐CD and the crown ether, this kind of crown ether capped β‐CD bonded phase shows better enantioselectivity than either β‐CD‐ or crown ether bonded phases only. These new types of stationary phases have good potential for fast chiral separation with CEC.     

Enantiomeric separation of 2‐arylpropionic acid nonsteroidal anti‐inflammatory drugs by HPLC with hydroxypropyl‐β‐cyclodextrin as chiral mobile phase additive

The enantio‐separations of eight 2‐arylpropionic acid nonsteroidal anti‐inflammatory drugs (2‐APA NSAIDs) were established using reversed‐phase high‐performance liquid chromatography with hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD) as chiral mobile phase additive for studying the stereoselective skin permeation of suprofen, ketoprofen, naproxen, indoprofen, fenoprofen, furbiprofen, ibuprofen and carprofen. The effects of the mobile phase composition, concentration of HP‐β‐CD and column temperature on retention and enantioselective separation were investigated. With 2‐APA NSAIDs as acidic analytes, the retention times and resolutions of the enantiomers were strongly related to the pH of the mobile phase. In addition, both the concentration of HP‐β‐CD and temperature had a great effect on retention time, but only a slight or almost no effect on resolutions of the analytes. Enantioseparations were achieved on a Shimpack CLC‐ODS (150 × 4.6 mm i.d., 5 μm) column. The mobile phase was a mixture of methanol and phosphate buffer (pH 4.0–5.5, 20 mM) containing 25 mM HP‐β‐CD. This method was flexible, simple and economically advantageous over the use of chiral stationary phase, and was successfully applied to the enantioselective determination of the racemic 2‐APA NSAIDs in an enantioselective skin permeation study. Copyright © 2009 John Wiley & Sons, Ltd.     

Layer‐by‐layer Assembled Multilayers of Graphene/Mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin for Detection of Dopamine

Graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin multilayer films composed of graphene sheet (GS) and mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were fabricated easily by two steps. First, negatively charged graphene oxide (GO) and positively charged mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were layer‐by‐layer (LBL) self‐assembled on glassy carbon electrode (GCE) modified with a layer of poly(diallyldimethylammonium chloride) (PDDA). Then graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GS/NH₂‐β‐CD) multilayer films were built up by electrochemical reduction of graphene oxide/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GO/NH₂‐β‐CD). Combining the high surface area of GS and the active recognition sites on β‐cyclodextrin (β‐CD), the GS/NH₂‐β‐CD multilayer films show excellent electrochemical sensing performance for the detection of DA with an extraordinary broad linear range from 2.53 to 980.05 µmol·L^?1. This study offers a simple route to the controllable formation of graphene‐based electrochemical sensor for the detection of DA.     

Electrochemically‐controlled DNA Release under Physiological Conditions from a Monolayer‐modified Electrode

An indium tin oxide (ITO) electrode prepared on a flexible polymeric support was modified with an amino‐silane and then functionalized with trigonelline and 4‐carboxyphenylboronic acid covalently bound to the amino groups. The trigonelline species containing quarterized ammonium group produced positive charge on the electrode surface regardless of the pH value, while the phenylboronic acid species were neutral below pH 8 and negatively charged above pH 9 (note that their pK_a=8.4). The total charge on the monolayer‐modified electrode was positive at the neutral pH and negative at pH>9 (note that 4‐carboxyphenylboronic acid was attached to the electrode surface in excess to trigonelline, thus allowing the negative charge to dominate on the electrode surface at basic pH). Single‐stranded DNA molecules were loaded on the modified electrode at pH 7.0 due to their electrostatic attraction to the positively charged surface. By applying electrolysis at −1.0 V (vs. Ag/AgCl reference) electrochemical oxygen reduction resulted in the consumption of hydrogen ions and local pH increase in the vicinity of the electrode surface. The process resulted in the transition to the total negative charge due to the negative charges formed on the phenylboronic acid species. This resulted in the electrostatic repulsion and release of the loaded DNA. The developed approach allowed the electrochemically‐triggered DNA release not only in the aqueous solutions, but also in human serum solution, thus giving promise for future biomedical applications.     

羟丙基-β-环糊精磁性复合微粒的合成及作为阿霉素载体的体外释药研究

羟丙基-β-环糊精因具有内部疏水和外部亲水锥形圆筒空腔结构和良好的生物相容性在磁性药物载体方面有潜在应用价值。本研究将羟丙基-β-环糊精修饰在超顺磁性纳米四氧化三铁粒子表面制备磁性复合微粒,用红外光谱,透射电镜,振动磁强计,电感耦合等离子发射等方法对该复合微粒进行了表征,并将其用于抗肿瘤药物阿霉素的体外载药与释药实验研究。结果表明该复合微粒的粒径大小在10-20nm,饱和磁化强度59.9 emu/g,铁含量55.4%。对阿霉素的载药量为87.8 μg/mg。体外释药结果显示载药复合粒子在PBS中1天,4天,10天的累积释药量分别为35.5%, 49.3%, 76.5%,表明该载体具有一定的药物缓释功能。由此可知,羟丙基-β-环糊精磁性复合微粒可作为磁性靶向给药系统的有效载体。     

β‐Cyclodextrin Pseudopolyrotaxanes with π‐Conjugated Polymer Axles

Summary: β‐Cyclodextrin (β‐CD) pseudopolyrotaxanes containing poly(thiophene‐2,5‐diyl), PTh , or poly(3‐methylthiophene‐2,5‐diyl)s, P3MeTh s, as an axle were prepared. Structures of the pseudopolyrotaxanes and their inclusion behavior with β‐CD were investigated. The UV‐vis measurements revealed that inclusion of P3MeTh s by β‐CD depended on the flexibility of the main chain and their molecular weight.

Formation of the inclusion complex of β‐CD and PTh .     

Dual crosslinked pH‐ and temperature‐sensitive hydrogel beads for intestine‐targeted controlled release

Novel drug‐loaded hydrogel beads for intestine‐targeted controlled release were developed by using pH‐ and temperature‐sensitive carboxymethyl chitosan‐graft‐poly(N,N‐diethylacrylamide) (CMCTS‐g‐PDEA) hydrogel as carriers and vitamin B₂ (VB₂) as a model drug. The hydrogel beads were prepared based on Ca²⁺ ionic crosslinking in acidic solution and formed dual crosslinked network structure. The structure of hydrogel and morphology of drug‐loaded beads were characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). The study about swelling characteristics of hydrogel beads indicated that the beads had obvious pH‐ and temperature‐sensitivity. In vitro release studies of drug‐loaded beads were carried out in pH 1.2 HCl buffer solution and pH 7.4 phosphate buffer solution at 37°C, respectively. The results indicated that the dual crosslinked method could effectively control the drug release rate under gastrointestinal tract (GIT) conditions, which was superior to traditional single crosslinked beads. In addition, the effects of grafting percentage, pH value, and temperature on the release behavior of the VB₂ were investigated. The drug release mechanism of CMCTS‐g‐PDEA drug‐loaded beads was analyzed by Peppa's potential equation. According to this study, the dual crosslinked hydrogel beads based on CMCTS‐g‐PDEA could serve as suitable candidate for drug site‐specific carrier in intestine. Copyright © 2009 John Wiley & Sons, Ltd.     

Preparation and characterization of poly(ethylene oxide)‐loaded hydroxypropyl‐β‐cyclodextrin nanofibers

Hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD) is a modified β‐cyclodextrin (β‐CD) derivative, which is toxicologically harmless to mammals and other animals. HP‐β‐CD is electrospun from an aqueous solution by blending with a non‐toxic, biocompatible, synthetic polymer poly(ethylene oxide) (PEO). Aqueous solutions containing different HP‐β‐CD/PEO blends (50:50–80:20) with variable concentrations (4 wt%–12 wt%) were used. Scanning electron microscope was used to investigate the morphology of the fibers, and Fourier transform infrared spectroscopy analysis confirmed the presence of HP‐β‐CD in the fiber. Uniform nanofibers with an average diameter of 264, 244, and 236 nm were obtained from 8 wt% solution of 50:50, 60:40, and 70:30 HP‐β‐CD/PEO, respectively. The average diameter of the fiber was decreased with increasing of HP‐β‐CD/PEO ratio. However, a higher proportion of HP‐β‐CD in the spinning solution increased beads in the fibers. The polymer concentration had no significant effect on the fiber diameter. The most uniform fibers with the narrowest diameter distribution were obtained from the 8 wt% of 50:50 solution. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of Novel Bis(β‐cyclodextrin)s Linked with Glycol and Their Inclusion Complexation with Organic Dyes

Three novel bis(β‐cyclodextrin (CD))s with flexible glycol linkers, i.e., ethylene glycol‐bridged bis(6‐hydroxy‐6‐deoxy‐β‐CD) ( 2 ), diethylene glycol‐bridged bis(6‐hydroxy‐6‐deoxy‐β‐CD) ( 3 ), and triethylene glycol‐bridged bis(6‐hydroxy‐6‐deoxy‐β‐CD) ( 4 ) have been synthesized by the reaction of mono[6‐O‐(p‐toluenesulfonyl)]‐β‐CD with corresponding materials. The inclusion complexation behaviors of these compounds 2 – 4 with organic dyes; that is, acridine red (=N‐[(3Z)‐6‐(methylamino)‐3H‐xanthen‐3‐ylidene]methanaminium chloride; AR), neutral red (=N⁸,N⁸,3‐trimethylphenazine‐2,8‐diamine hydrochloride; NR), ammonium 8‐anilinonaphthalene‐1‐sulfonate (ANS), sodium 6‐(p‐toluidinyl)‐naphthalene‐2‐sulfonate (TNS), rhodamine B (RhB) and brilliant green (=N‐(4‐{[4‐(diethylamino)cyclohexa‐2,5‐dien‐1‐yl](phenyl)methyl}cyclohex‐2‐en‐1‐ylidene)‐N‐ethyl‐ethanaminium hydrogen sulfate; BG), have been investigated at 25° in phosphate buffer (pH 7.20) by ultraviolet, fluorescence, and 2D‐NMR spectroscopy. The results indicate that the two linked CD units may cooperatively bind a guest, and the molecular binding ability toward dye guests, especially bent ANS, T‐shaped RhB, and triangular BG, can be extended. This cooperative binding mode is confirmed by Job's experiments and 2D‐NMR investigations. Furthermore, the complex stability depends greatly on the linker length of these glycol‐bridged bis(β‐CD)s and the size and shape of guest. The higher binding ability and selectivity of dye molecules by bis(β‐CD)s 2 – 4 are discussed from the viewpoint of size/shape‐fit concept and multiple recognition mechanism.     

Preparation and Stability Evaluation of Size‐Controllable PDHCA‐β‐CD Nanoparticles as Drug Carrier

A novel biocompatible polymer was prepared by grafting the derivate of β ‐cyclodextrin (6‐SH ‐β ‐CD ) onto poly(3,4‐dihydroxycinnamic acid) (PDHCA ) via Michael addition. PDHCA ‐β ‐CD nanoparticles were prepared by the self‐assembly of amphiphilic PDHCA ‐β ‐CD polymer with N,N ‐dimethylformamide (DMF ) as good solvent and water as poor solvent. The PDHCA ‐β ‐CD nanoparticles were monodispersed with spherical morphology as shown in the scanning electron microscopic (SEM ) images in accord with the result of dynamic light scattering (DLS ) measurement. The size of the nanoparticles could be controlled from 60 to 180 nm by tuning the grafting degree (GD ) of PDHCA ‐β ‐CD polymer and also significantly influenced by the amount of water used during the process. These as‐prepared nanoparticles were stable without any significant change in the particle size after six‐months’ storage and even after being irradiated by UV at λ >280 nm for hours. The formation mechanism of PDHCA ‐β ‐CD nanoparticles was explored. The content of doxorubicin (DOX ) loaded onto the nanoparticles was up to 39% with relatively high loading efficiency (approximately 78.8% of initial DOX introduced was loaded). In vitro release studies suggested that DOX released slowly from PDHCA ‐β ‐CD nanoparticles. These features strongly support the potential of developing PDHCA ‐β ‐CD nanoparticles as carriers for the controlled delivery of drug.