Mn(III)-mediated formal [3+3]-annulation of vinyl azides and cyclopropanols: a divergent synthesis of azaheterocycles

Mn(III)-mediated formal [3+3]-annulation has been developed using readily available vinyl azides and cyclopropanols with a wide range of substituents. Vinyl azides were successfully applied as a three-atom unit including one nitrogen to prepare pyridines and δ-lactams by the reactions with monocyclic cyclopropanols as well as to construct 2-azabicyclo[3.3.1] and 2-azabicyclo[4.3.1] frameworks with bicyclic cyclopropanols, bicyclo[3.1.0]hexan-1-ols, and bicyclo[4.1.0]heptan-1-ols. These reactions were initiated by a radical addition of β-carbonyl radicals, generated by the one-electron oxidation of cyclopropanols with Mn(III), to vinyl azides to give iminyl radicals, which cyclized with the intramolecular carbonyl groups. In addition, application of the present methodology to a synthesis of the quaternary indole alkaloid, melinonine-E, was accomplished.     

The allylic azide rearrangement: achieving selectivity

Allylic azides undergo a rapid [3.3]-sigmatropic rearrangement which results in dynamic equilibrium of several isomers. Thus, reactions of allylic azides usually result in mixtures of products. However, even small differences in reactivity of the isomeric allylic azides can be amplified to result in a single product in good to excellent yields. For example, the Cu(I)-catalyzed cycloaddition with alkynes selectively captures primary and secondary allylic azide isomers, whereas MCPBA epoxidation favors isomers which contain more electron-rich double olefins.     

Mechanism of thio acid/azide amidation

A combined experimental and computational mechanistic study of amide formation from thio acids and azides is described. The data support two distinct mechanistic pathways dependent on the electronic character of the azide component. Relatively electron-rich azides undergo bimolecular coupling with thiocarboxylates via an anion-accelerated [3+2] cycloaddition to give a thiatriazoline. Highly electron-poor azides couple via bimolecular union of the terminal nitrogen of the azide with sulfur of the thiocarboxylate to give a linear adduct. Cyclization of this intermediate gives a thiatriazoline. Decomposition to amide is found to proceed via retro-[3+2] cycloaddition of the neutral thiatriazoline intermediates. Computational analysis (DFT, 6-31+G(d)) identified pathways by which both classes of azide undergo [3+2] cycloaddition with thio acid to give thiatriazoline intermediates, although these paths are higher in energy than the thiocarboxylate amidations. These studies also establish that the reaction profile of electron-poor azides is attributable to a prior capture mechanism followed by intramolecular acylation.     

A strain-promoted [3 + 2] azide-alkyne cycloaddition for covalent modification of biomolecules in living systems

Selective chemical reactions that are orthogonal to the diverse functionality of biological systems have become important tools in the field of chemical biology. Two notable examples are the Staudinger ligation of azides and phosphines and the Cu(I)-catalyzed [3 + 2] cycloaddition of azides and alkynes ("click chemistry"). The Staudinger ligation has sufficient biocompatibility for performance in living animals but suffers from phosphine oxidation and synthetic challenges. Click chemistry obviates the requirement of phosphines, but the Cu(I) catalyst is toxic to cells, thereby precluding in vivo applications. Here we present a strain-promoted [3 + 2] cycloaddition between cyclooctynes and azides that proceeds under physiological conditions without the need for a catalyst. The utility of the reaction was demonstrated by selective modification of biomolecules in vitro and on living cells, with no apparent toxicity.     

Ruthenium(II)-cored supramolecular organic framework-mediated recyclable visible light photoreduction of azides to amines and cascade formation of lactams

Porous[Ru(bpy)₃]²⁺-cored supramolecular metal organic framework can efficiently catalyze visible light photoreduction of various azides to afford amines and, through cascade reactions, lactams.     

Fragmentation of carbohydrate anomeric alkoxyl radicals. A new synthesis of chiral beta-iodo azides, vinyl azides, and 2H-azirines

[reaction: see text] The reaction of 3-azido-2,3-dideoxy-hexopyranose compounds from the d-gluco, d-galacto, d-lacto, and l-arabino carbohydrate series, with (diacetoxyiodo)benzene and iodine, generated 2-azido-1,2-dideoxy-1-iodo-alditols with one carbon less than the starting carbohydrate. These beta-iodo azides could be transformed by dehydroiodination into vinyl azides, which in turn afforded 3-monosubstituted 2H-azirines under thermal conditions. These beta-iodo azides and 2H-azirines may be interesting chiral synthons for the preparation of more complex heterocyclic systems.     

Peptidotriazoles on solid phase: [1,2,3]-triazoles by regiospecific copper(i)-catalyzed 1,3-dipolar cycloadditions of terminal alkynes to azides

The cycloaddition of azides to alkynes is one of the most important synthetic routes to 1H-[1,2,3]-triazoles. Here a novel regiospecific copper(I)-catalyzed 1,3-dipolar cycloaddition of terminal alkynes to azides on solid-phase is reported. Primary, secondary, and tertiary alkyl azides, aryl azides, and an azido sugar were used successfully in the copper(I)-catalyzed cycloaddition producing diversely 1,4-substituted [1,2,3]-triazoles in peptide backbones or side chains. The reaction conditions were fully compatible with solid-phase peptide synthesis on polar supports. The copper(I) catalysis is mild and efficient (>95% conversion and purity in most cases) and furthermore, the X-ray structure of 2-azido-2-methylpropanoic acid has been solved, to yield structural information on the 1,3-dipoles entering the reaction. Novel Fmoc-protected amino azides derived from Fmoc-amino alcohols were prepared by the Mitsunobu reaction.     

Reactions of cyclopropanone acetals with alkyl azides: carbonyl addition versus ring-opening pathways

The Lewis acid-mediated reactions of substituted cyclopropanone acetals with alkyl azides were found to strongly depend on the structure of the ketone component. When cyclopropanone acetal was treated with alkyl azides, N-substituted 2-azetidinones and ethyl carbamate products were obtained, arising from azide addition to the carbonyl, followed by ring expansion or rearrangement, respectively. When 2,2-dimethylcyclopropanone acetals were reacted with azides in the presence of BF3.OEt2, the products obtained were alpha-amino-alpha'-diazomethyl ketones, which arose from C2-C3 bond cleavage of the corresponding cyclopropanone, giving oxyallyl cations that were captured by azides. Aryl-substituted cyclopropanone acetals, when subjected to these conditions, afforded [1,2,3]oxaborazoles exclusively, which were also the result of C2-C3 bond rupture, azide capture, and then loss of nitrogen. In the reactions of n-hexyl-substituted cyclopropanone acetals with alkyl azides, a mixture of 2-azetidinones and regioisomeric [1,2,3]oxaborazoles was obtained. The reasons for the different behavior of the various systems are discussed.     

Allenyl azide cycloaddition chemistry. Synthesis of annelated indoles from 2-(allenyl)phenyl azide substrates

[reaction: see text] Thermolysis of 2-(allenyl)phenyl azides leads to a cascade cyclization sequence furnishing both C(2)-C(3) and N-C(2) cyclopentannelated indoles.     

Bisindoles 34. Preparation and reactions of dehydrazides of the benzo[e]pyrrolo[3,8-g]-indole and indolo[4,5-e]indole series

Summary 2, 9 -Di (carbohydrazide)-1 H, IOH-benzo[elpyrrolo[3, 2-g]indole and 2, 9-di (carbohydrazide)-3H, 8H-indolo[4, 5-e]indole have been prepared. Nitrosation of the dihydrazides has been effected. The aryl azides do not undergo the curtius rearrangment.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 1048-1051, August, 1994.Communication 33, see [1].     

Dendronized linear polymers via "click chemistry"

Dendronized linear polymers are prepared from dendritic azides and poly(vinylacetylene) using "click chemistry." The Cu(I)-catalyzed Huisgen [2 + 3] cycloaddition is quantitative up to the third generation.     

C60与叠氮化合物的单加成反应

本文从实验以及理论研究两方面介绍了C60与叠氧化合物的单加成反应。依照叠氮化合物的不同,C60与叠氮合物的单加成反应可分为烷基叠氮化物与C60的反应,酰基叠氧化物与C60的反应以及苯基叠氮化与C60的反应三类,而反应产物则为C60亚氨基[6,6]闭环衍生物和C60亚氨基[5,6]开环衍生物两类,不同类型的反应具有不同的反应机理,某些C60亚氨基[5,6]开环衍生物可以转化为C60亚氨基[6,6]闭环衍生物。本文还介绍了碳纳米管与叠氮化合物的加成反应。     

A study of the scope and regioselectivity of the ruthenium-catalyzed [3 + 2]-cycloaddition of azides with internal alkynes

[3 + 2]-Cycloadditions of alkyl azides with various unsymmetrical internal alkynes in the presence of CpRuCl(PPh3)2 as catalyst in refluxing benzene have been examined, leading to 1,4,5-trisubstituted-1,2,3-triazoles. Whereas alkyl phenyl and dialkyl acetylenes undergo cycloadditions to afford mixtures of regioisomeric 1,2,3-triazoles, acyl-substituted internal alkynes react with complete regioselectivity. In addition, propargyl alcohols and propargyl amines were found to react with azides to afford single regioisomeric products.     

Regioselective formation of 2,5-disubstituted oxazoles via copper(i)-catalyzed cycloaddition of acyl azides and 1-alkynes

The reaction of 1-alkynes with acyl azides in the presence of [Tpm(*,Br)Cu(NCMe)]BF(4) [Tpm(*,Br) = tris(3,5-dimethyl-4-bromopyrazolyl)methane] as the catalyst provides 2,5-oxazoles in moderate to high yields. This is a novel transformation of the CuAAC type that constitutes a significant variation of the commonly observed [3 + 2] cycloaddition reaction to yield 1,2,3-triazoles.     

Addition reactions of fluoroalkanesulfonyl azides to [60] fullerene under thermal or microwave irradiation condition

The reactions of [60] fullerene with excess fluoroalkanesulfonyl azides R_fSO₂N₃ in o-dichlorobenzene under thermal or microwave irradiation condition afforded monoadduct opened [5,6]-bridged azafulleroids. While, similarly treatment of 2,2,2-trifluoroethyl azides CF₃CH₂N₃ with C₆₀ gave two monoadducts, i.e., opened [5,6]-bridged azafulleroids, closed [6,6]-bridged Aziridino-fullerene, and some multi-addition product. A general mechanism for these addition reactions was proposed.     

Reusable polymer-supported catalyst for the [3+2] Huisgen cycloaddition in automation protocols

[reaction: see text] A polymer-supported catalyst for Huisgen's [3+2] cycloaddition reaction between azides and alkynes was prepared from copper(I) iodide and Amberlyst A-21. This catalyst was then used in an automated synthesis of 1,4-disubstituted 1,2,3-triazoles giving access to these products in good yields. The catalyst has shown good activity, stability, and recycling capabilities.     

Ru(TPP)CO]-Catalysed Intramolecular Benzylic CH Bond Amination, Affording Phenanthridine and Dihydrophenanthridine Derivatives

Shedding light on azides: [Ru(TPP)CO] (TPP=tetraphenyl porphyrin dianion), white light and O(2) were found to be a suitable catalyst combination to perform the annulation of several biaryl azides. The high chemoselectivity of the process allows the synthesis of phenanthridines and dihydrophenanthridines in good yield and purity.     

Synthesis of ethyl 4,5-disubstituted 2-azido-3-thiophenecarboxylates and use in the synthesis of thieno[3,2-e][1,2,3]triazolo[1,5-a]pyrimidin-5(4H)-ones

New heterocyclic azides, ethyl 2-azido-4-R¹-5-R²-3-thiophenecarboxylates, were synthesized by diazotization of 2-aminothiophenes and subsequent treatment with sodium azide. The reactions of these heterocyclic azides with β-ketoesters and activated acetonitriles were studied. The derivatives of thieno[3,2-e][1,2,3]triazolo[1,5-a]pyrimidine, a new ring system, were prepared in high yields via an anionic hetero-domino reaction.     

A novel class of compounds: synthesis of 5,5′-carbonyl-bis(5,6-dihydro-4H-furo- and thieno-[2,3-c]pyrrol-4-ones)

We hereby report the first synthesis of novel class of compounds, 5,5′-carbonyl-bis(5,6-dihydro-4H-thieno- and furo-[2,3-c]pyrrol-4-one starting from methyl 2-(2-methoxy-2-oxoethyl) thiophene- and furan-3-carboxylate, respectively. The ester functionalities connected to methylene group were regiospecifically converted to the desired monoacyl azides. Curtius rearrangement of acyl azides followed by hydrolysis of the formed isocyanates gave the symmetrical urea derivatives. Cyclization of the ester groups provided the target compounds.     

Second-generation difluorinated cyclooctynes for copper-free click chemistry

The 1,3-dipolar cycloaddition of azides and activated alkynes has been used for site-selective labeling of biomolecules in vitro and in vivo. While copper catalysis has been widely employed to activate terminal alkynes for [3 + 2] cycloaddition, this method, often termed "click chemistry", is currently incompatible with living systems because of the toxicity of the metal. We recently reported a difluorinated cyclooctyne (DIFO) reagent that rapidly reacts with azides in living cells without the need for copper catalysis. Here we report a novel class of DIFO reagents for copper-free click chemistry that are considerably more synthetically tractable. The new analogues maintained the same elevated rates of [3 + 2] cycloaddition as the parent compound and were used for imaging glycans on live cells. These second-generation DIFO reagents should expand the use of copper-free click chemistry in the hands of biologists.