Osmotic Pressure, Small-Angle X-Ray, and Dynamic Light Scattering Studies of Human Serum Albumin in Aqueous Solutions

Osmotic pressure measurements of human serum albumin (HSA) dissolved in water and in 0.01, 0.1, and 1.0 M phosphate buffer are reported as a function of the protein concentration. Two different forms of the protein were studied: defatted HSA (HSA1) and HSA with fatty acids (HSA2). The measured values of the osmotic coefficient were well below 1, indicating large deviations from ideality even for dilute protein solutions. The measured values increased with increasing HSA concentration and the increase was a function of pH. For higher concentrations of added phosphate buffer, the pH of solution had less influence on the measured osmotic pressure. The osmotic pressure of HSA1 in water was found to be considerably lower than that of the HSA2 modification. This effect was ascribed to formation of dimers in the HSA1 solution. The osmotic measurements were complemented by the small-angle X-ray scattering (SAXS) and dynamic light scattering (DLS) studies of dilute HSA solutions in water. The SAXS and DLS data confirmed the dimerization of HSA1 molecules under these conditions. Detailed analysis of the SAXS data suggested a parallel orientation of two protein molecules in a dimer. Copyright 2001 Academic Press.     

Membrane equilibria in concentrated polymer solutions

Membrane equilibria in concentrated polymer solutions are investigated. A three-component system (solvent, a polymer and an arbitrary solute) is considered. Starting with the virial expansion of the osmotic pressure, the Gibbs-Duhem equation for the system is integrated and the chemical potentials of the different components are evaluated. From the latter the equilibrium conditions are derived for a variety of experimental situations. The treatment is extended to the study of partition equilibria in gels, using a concentrated polymer solution as a model for the gel.     

电场敏感性聚(丙烯酸-co-丙烯酸甲酯)凝胶的合成和性能

以丙烯酸、丙烯酸甲酯为单体,亚甲基双丙烯酰胺为交联剂,过硫酸铵为引发剂,N,N-四甲基乙二胺为促进剂,合成了一系列电场敏感性凝胶.研究了氯化钠溶液,pH缓冲溶液对凝胶平衡溶胀度的影响,并测定了所得电场敏感性凝胶在电场作用下的脱水行为.研究结果表明,所得凝胶具有很好的电场敏感性.此外,初步讨论了该类电场敏感性凝胶的电致收缩机理.     

干燥方式对含直链淀粉半互穿网络水凝胶溶胀和降解的影响

以4,4′-二甲基丙烯酰胺基偶氮苯(BMAAB)为交联剂,制备了丙烯酸-丙烯酰胺-甲基丙烯酸酯共聚物和直链淀粉半互穿网络水凝胶.以冷冻干燥和空气干燥两种方式,研究了干凝胶在pH2.2和pH7.4时的溶胀和降解性能.结果表明采用两种干燥方式的凝胶在不同pH的介质中都遵循二级溶胀动力学.凝胶内部水的扩散均为非Fickian机理,即扩散和链松弛协同作用的机理.但经历冷冻干燥的凝胶其扩散机制占优势.在pH=7.4的介质中,冷冻干燥凝胶的平衡溶胀比(SR)显著增大,而在pH=2.2时则无明显变化.扫描电镜(SEM)和降解实验发现,在结肠内容物的作用下,冷冻干燥凝胶在5天内降解率可达35.3%,而空气干燥凝胶的降解率为28.1%,表明冷冻干燥的方式可在一定程度上促进凝胶在结肠环境下的降解.     

Swelling Behavior and Metal-Ion Uptake Capacity of pH-Responsive Hydrogels of Poly(N-acryloyl-N′-ethylpiperazine)

New hydrogels based on N-acryloyl-N′-ethylpiperazine (AcrNEP) and N,N-methylene bisacrylamide (MBA) were prepared by thermal initiated solution polymerization. The hydrogels swelled extensively in buffer solutions of low pH due to protonation of the amine functions of the monomers, while the swelling was less significant in buffer solutions of high pH. The increased swelling of the gel in low pH is due to the development and interaction of fixed charges within the gel network. As a result of the electrostatic repulsion between the charges the elastic constraint of the gel is modified which leads to pronounced swelling and hence to high water uptake. Water transport in the hydrogel both in buffer solutions of pH 2.6 and pH 8.4 was non-Fickian due to polymer relaxation (anomalous process). The gels demonstrated good uptake of divalent metal ions such as Ni²⁺, Co²⁺, and Zn²⁺, with high selectivity for Ni²⁺ ions due to the formation of a more stable ligand-metal complex. The metal uptake capacity increased with increase in pH of the solution, while an increase in the crosslinker amount of the hydrogel reduced its metal uptake capacity. In the presence of metal ions the swelling of the hydrogel reduced considerably due to the formation of additional physical crosslinks within the hydrogel network. The metal ion loaded hydrogels could be stripped and regenerated with 1 M sulfuric acid without any loss in swelling or metal uptake capacities.     

Osmotic deswelling of weakly charged poly(acrylic acid) solutions and gels

The osmotic pressure of weakly charged aqueous poly(acrylic acid) (PAA) solutions and the swelling pressure PAA gels were studied by osmotic deswelling at different degrees of ionization (α). In solution, the osmotic pressure was found to scale linearly with concentration, whereas the scaling power of the swelling pressure of gels was higher (1.66). The effect of the ionization degree on the osmotic coefficient in PAA solutions was in agreement with the theory of Borue and Erukhimovich [Macromolecules, 21 , 3240 (1988)]. Ionization increases the swelling capacity of the PAA gels until a plateau is reached at about 35% neutralization. The concentration at equilibrium swelling scales as C_e ～ α^?0.6. The contribution of the network to the gel swelling pressure is evaluated by subtracting the osmotic pressure of the polymer solution at the same concentration and degree of ionization. In swollen gels the extended network opposes swelling. As the gel is osmotically deswelled, a state of zero network pressure exists at a certain concentration, below which the network elasticity favors swelling. The crossover concentration shifts to lower values as the degrees of ionization increases. © 1995 John Wiley & Sons, Inc.     

Analysis of osmotic pressure data for aqueous protein solutions via a multicomponent model

Integral equation theories and Monte Carlo simulations were used to study the Donnan equilibrium, which is established by an equilibrium distribution of a simple electrolyte between an aqueous protein-electrolyte mixture and an aqueous solution of the same simple electrolyte, when these two phases are separated by a semipermeable membrane. In order to describe the unusually low osmotic pressure found in many experiments we assumed that protein molecules can form dimers. The model solution contains proteins in a monomeric form, represented as charged hard spheres, or in a dimerized form, modeled as fused charged hard spheres. The counterions and coions were also modeled as charged hard spheres but of a much smaller size. The associative mean spherical and hypernetted-chain approximations were applied to this model. In addition, Monte Carlo computer simulations were performed for the same model system mimicking a lysozyme solution in the presence of 0.1 M sodium chloride. Theory and simulations were found to be in reasonably good agreement for the thermodynamic properties such as chemical potential and osmotic pressure under these conditions. Using the theoretical approaches mentioned above, we analyzed the experimental data for the osmotic pressure of bovine serum albumin in 0.15 M sodium chloride, human serum albumin solution (HSA) in 0.1 M phosphate buffer, and lysozyme in sulphate and phosphate buffers. The theoretically determined osmotic coefficients were fitted to the existing experimental data in order to obtain the fraction of dimers in solution. Our analysis indicated that there was relatively small self-association of protein molecules for bovine serum albumin solutions at pH=5.4 and 7.3, with the fraction of dimers smaller than 10%, while at pH=4.5 the dimer fraction was equal to 50%. In the case of HSA solutions, strong negative deviations from the ideal value were found and at pH=8.0 a reasonably good agreement between the theory and experiment is obtained by assuming full dimerization. For HSA solution at pH=5.4, the best fit to the experimental results was obtained for a fraction of dimers equal to 80%.     

PH-Responsive and Self-Healing Hydrogels Fabricated with Guar Gum and Reactive Microgels

Hydrogels (MR gels) with pH-responsive and self-healing properties were prepared via guar gum solutions and reactive microgel. The reactive microgel was characterized through scanning electron microscope (SEM), laser particle-size analysis measurements, and FTIR. Compared with general hydrogels cross-linked by borax (B gels), the MR gels exhibit superior properties on the aspects of viscosity, viscoelasticies, and temperature resistance. Furthermore, the viscosities of MR gels increase with the rising pH value, and it can dynamically reconstruct after being destructed by external force. In addition, the microstructure of the MR gel was characterized by SEM, which confirms that the reactive microgel indeed as cross-linker and each microgel can cross-link several chains as if the chains were grafting from the microgels. These features show that the addition of reactive microgels can enhance the strength of MR gels significantly and indicate that the MR gels have a great potential application in hydraulic fracturing, especially in high-temperature oil fields.     

A new specific metal ion chelated‐poly(N‐vinylimidazole) gel sorbents for albumin adsorption‐desorption

Poly(N‐vinylimidazole) (PVIm) hydrogels were prepared by γ‐irradiating binary mixtures of N‐vinylimidazole‐water in a ⁶⁰Co‐γ source having 4.5 kGy/h dose rate. These affinity gels having different swelling ratio of Cu(II)‐chelated, Co(II)‐chelated and plain PVIm in acetate buffer were used in the albumin adsorption studies. Bovine serum albumin (BSA) adsorption on these gels from aqueous solutions containing different amounts of BSA at different pH adjusted with acetate and phosphate buffer was investigated in batch reactors. The adsorption capacities of BSA on/in the gels were decreased dramatically by increasing the ionic strength (I) adjusting with NaCl. BSA adsorption capacities of the metal ion‐chelated gels were higher than the plain PVIm gel even if the swelling ratio of the metal ion‐chelated gels was very low comparing to the PVIm gel. The rigidity of the metal ion‐chelated gel is very high and it can be used for the column applications. More than 95% of BSA were desorbed in 3 h in the desorption medium containing KSCN for PVIm gel and EDTA for metal ion‐chelated gels. These results indicate that PVIm and metal ion‐chelated PVIm gels are very efficient to remove BSA and the different metal ion‐chelated PVIm gels show different affinity for BSA or biomolecules.     

活性炭复合改善聚丙烯酸凝胶耐盐性及其溶胀机理

在活性炭(Ac)存在的情况下通过自由基溶液聚合,以过硫酸铵为引发剂,N,N′-亚甲基双丙烯酰胺为交联剂,制备了活性炭复合聚丙烯酸凝胶(PAA/AC)。 考察了凝胶在蒸馏水、生理盐水和不同pH值缓冲溶液中的平衡溶胀比以及溶胀动力学,结果表明,活性炭能有效提高凝胶的平衡溶胀比,在实验设计的pH值范围内复合凝胶具有比PAA凝胶更高的平衡溶胀比,蒸馏水和生理盐水中PAA/AC凝胶的平衡溶胀比分别可达到303和60 g/g,约为PAA凝胶的2.4倍。 讨论了凝胶的溶胀机理,结果表明,活性炭成分的介入破坏了聚合物链段之间的聚集态结构,减弱了聚合物链段之间的相互作用,提高了凝胶的溶胀能力。 示差扫描量热仪测定复合前后凝胶的玻璃化转变温度,扫描电子显微镜观察了复合前后凝胶的断面网络结构,结果进一步表明活性炭复合后聚合物链段之间的作用力减弱。     

Metal ion promoted hydrogels for bovine serum albumin adsorption: Cu(II) and Co(II) chelated poly[(N-vinylimidazole)-maleic acid

Poly[(N-vinylimidazole)-maleic acid] (poly(VIm-MA)), copolymeric hydrogels were prepared by gamma-irradiating ternary mixtures of N-vinylimidazole-maleic acid-water in a (60)Co-gamma source. Cu(II) and Co(II) ions were chelated within the gels at pH=5.0. The maximum adsorption capacity of the gels were 3.71 mmol/g dry gel for Cu(II) and 1.25 mmol/g dry gel for Co(II) at pH=5.0. The swelling ratios of the gels were 1200% for poly(VIm-MA), 60 and 45% for Cu(II) and Co(II)-chelated poly(VIm-MA) gels at pH=5.0 in acetate buffer solution. These affinity gels with different swelling ratios for plain poly(VIm-MA), Cu(II)-, and Co(II)-chelated poly(VIm-MA), in acetate and phosphate buffers were used in the bovine serum albumin (BSA) adsorption/desorption studies in batch reactor. The maximum BSA adsorption capacities of the gels were 0.38 g/g dry gel for plain, 0.88 g/g dry gel for Cu(II)-chelated poly(VIm-MA) and 1.05 g/g dry gel for Co(II)-chelated poly(VIm-MA) gels. Adsorption capacity of BSA by the gels was reduced dramatically by increasing the ionic strength adjusted with NaCl. More than 95% of BSA were desorbed in 10 h in desorption medium containing 0.1M of EDTA for metal ion-chelated gels at pH=4.7.     

Cationic temperature-responsive poly(N-isopropyl acrylamide) graft copolymers: from triggered association to gelation

In this work temperature-triggered association and gel formation within aqueous solutions of a new family of cationic poly( N-isopropyl acrylamide) (PNIPAm) graft copolymers have been investigated. Five copolymers were synthesized using aqueous atom transfer radical polymerization (ATRP) involving a macroinitiator based on quaternarized N, N-dimethylaminoethyl methacrylate units (DMA+). The PDMA+) x - g-(PNIPAmn)y copolymers have x and y values that originate from the macroinitiator; values for n correspond to the PNIPAm arm length. The copolymer solutions exhibited temperature-triggered formation of nanometer-sized aggregates at the cloud point temperature, which was 33-34 degrees C. The aggregates were investigated using variable-temperature turbidity, hydrodynamic diameter, and electrophoretic mobility measurements. The aggregates were clearly evident using SEM and flowerlike or spherical morphologies were observed. Variable-temperature electrophoretic mobility measurements revealed that the zeta potentials of the aggregates increased with DMA+ content. A study of the effect of added NaNO3 showed that electrostatic interactions controlled the size of the aggregates. The concentrated graft copolymer solutions showed temperature-triggered gelation when the copolymer concentrations exceeded 5 wt %, Fluid-to-gel phase diagrams were constructed. It was found that electrostatic interactions also controlled the gelation temperature. A correlation was found between aggregate size and the minimum copolymer concentration needed to form a gel. A mechanism for the temperature-triggered structural changes leading to the formation of aggregates (in dilute solution) or gels (in concentrated solutions) is proposed.     

离子键交联的聚两性电解质凝胶在不同pH和不同电解质溶液中溶胀行为研究

以丙烯酸(AA)和甲基丙烯酸二乙氨基乙酯(DEAM)形成的离子复合物与丙烯酰胺(AAm)共聚,合成了一种新型的离子键交联的聚两性电解质凝胶(PADA).由于分子之间的氢键作用,PADA凝胶并不是在A/C(负正离子单体摩尔比)为1,而是在A/C为1.55处有最大消溶胀.与共价键交联的聚两性电解质凝胶相比,PADA凝胶的溶胀行为具有更强的pH敏感性.PADA凝胶在不同pH缓冲溶液中的溶胀行为表明,在pH 3~4之间消溶胀程度最大.在偏离该pH区域时凝胶均发生溶胀.但凝胶的溶胀程度在pH<3的酸性溶液中随A/C的增加而降低;而在pH>4的偏碱性溶液中随其增加而增加.在不同价数的离子溶液中,离子浓度对于PADA凝胶的平衡溶胀有着不同的影响.对于一价的NaCl溶液,PADA凝胶有典型的反聚电解质效应.但对于高价的CaCl2和柠檬酸三钠溶液,只在较低的浓度下,才表现出反聚电解质效应.而在较高盐浓度时,随盐浓度的增加其溶胀比反而降低.这可能与高价离子形成的离子键交联有关.与pH对PADA凝胶溶胀程度的影响相似,在CaCl2溶液中,PADA凝胶的溶胀程度随A/C的增加而降低;而在柠檬酸三钠溶液中则刚好相反.这种独特的溶胀行为似乎与高价离子电荷的正负性有关.     

Formation and destruction of hydrogen bonds in gels and in aqueous solutions of N-isopropylacrylamide and sodium acrylate observed by ATR-FTIR spectroscopy

In this paper, the formation and destruction of hydrogen bonds in gels and in aqueous solutions of N-isopropylacrylamide (NIPA) and sodium acrylate (SA) were studied using Fourier transform infrared (FTIR) spectroscopy with attenuated total reflection (ATR). Aqueous solutions of NIPA and SA monomers with different pHs were prepared, and the ATR-FTIR spectra were obtained immediately after preparing the solution and after having been stored at room temperature for 6 months. It was found that the IR spectra evidently changed after 6 months due to polymerization, and the viscosity of a solution in the lowest pH system increased with time and finally the solution became a gel. The detailed analysis of the IR spectra indicated that the network of the gel was formed by the formation of hydrogen bonds (without crosslinker). Moreover, this physical gel exhibited the re-swelling transition by increasing the pH of solvent. The transition was caused by the destruction of hydrogen bonds due to the dissociation of carboxyl groups, which was also confirmed by the IR spectroscopy.     

Preparation of Forsterite by the Geopolymer Technique—Gel Compositions as a Function of pH and Crystalline Phases

Mg-bearing silicate precursor gels have been prepared by mixing 0.74 mol/L sodium metasilicate and 1.48 mol/L magnesium nitrate solutions. Caustic soda solution of 1.0 mol/L concentration was introduced to regulate pH. The magnesium nitrate solution was added dropwise to the sodium silicate solution in equi-volume at various pH values. Raw and heat-treated gels were characterized by XRF, TG-DTA, XRD and FE-SEM. As a result, gel compositions were dependent on pH values of mixing solutions. The pH value yielding stoichiometric forsterite composition, MgO/SiO₂ = 2 was reached at pH 9.3. In addition, this value was pH 8.4 for stoichiometric enstatite composition, MgO/SiO₂ = 1. With decreasing pH from 9.3, the ratio became less than 2 and forsterite and enstatite precipitated by heating the gels. With increasing pH from 9.3, the ratio became more than 2 and forsterite and periclase precipitated by heating the gels. DTA curves showed a characteristic exothermic peak centered at 700–900^∘C, indicating relatively low temperature formation of crystalline phases due to the presence of polycondensed frame works of silicates in the precursor gels.     

Synthesis of Fibrin-Type I Collagen Biomaterials via an Acidic Gel

Fibrin-Type I collagen composite gels have been widely studied as biomaterials, in which both networks are usually formed simultaneously at a neutral pH. Here, we describe a new protocol in which mixed concentrated solutions of collagen and fibrinogen were first incubated at acidic pH to induce fibrinogen gel formation, followed by a pH change to neutral inducing collagen fiber formation. Thrombin was then added to form fibrin-collagen networks. Using this protocol, mixed gels containing 20 mg.mL⁻¹ fibrin and up to 10 mg.mL⁻¹ collagen could be prepared. Macroscopic observations evidenced that increasing the content of collagen increases the turbidity of the gels and decreases their shrinkage during the fibrinogen-to-fibrin conversion. The presence of collagen had a minor influence on the rheological properties of the gels. Electron microscopy allowed for observation of collagen fibers within the fibrin network. 2D cultures of C2C12 myoblasts on mixed gels revealed that the presence of collagen favors proliferation and local alignment of the cells. However, it interferes with cell differentiation and myotube formation, suggesting that further control of in-gel collagen self-assembly is required to elaborate fully functional biomaterials.     

Determination of the parameters controlling swelling of chemically cross-linked pH-sensitive poly(N-vinylimidazole) hydrogels

The number of variables controlling the behavior of ionic gels is large and very often some of them are unknown. The aim of this work is to interpret quantitatively the swelling behavior of pH sensitive gels, with the minimum number of simplifying assumptions. With this purpose, the equilibrium degree of swelling (S) and protonation (alpha) of chemically cross-linked poly(N-vinylimidazole) (PVI) immersed in aqueous salt solutions were measured as a function of the ionic strength (mu), in the whole range of pH. In acid solutions with pH in the range 0 to 4, imidazole moieties become protonated, and PVI behaves as a polyelectrolyte gel: S decreases upon increasing mu both for NaCl and for CaCl(2), with HCl as protonating acid. In aqueous solutions with larger pH, between 4 and 12, the hydrogel is practically neutral, and S increases as mu rises, showing a salting-in effect. From the quantitative analysis of these results, the following facts emerged. Protonation induces chain stiffness (as measured by the non-Gaussian factor) and worsening of the solvent quality of the aqueous media (as measured by the polymer-solvent interaction parameter). For alpha below 33%, swelling seems to be governed by the excess of mobile counterions inside the gel with respect to the bath, with a minor but still significantly negative contribution of the osmotic swelling pressure due to polymer-solvent mixing. Above 33% protonation, it is necessary to consider Manning counterion condensation to get parameters with physical meaning. The crossover between polyelectrolyte and salting-in effects corresponds to alpha and mu values with the same ionic and mixing contributions to the osmotic swelling pressure. The formation of ionic nonpermanent cross-links, with H(2)SO(4) as the protonating acid, was discarded.     

HPLC study for evaluating the significance of pH in the inhibiting effect of phosphate buffer on the leaching pattern of resin composites

An HPLC method was applied to evaluate the inhibiting effect of phosphate buffer on the leaching pattern of resin composites and the significance of pH levels during the storage period in the solutions. Ten (10) disk-shaped specimens (2?mm?×?12?mm diameter) from Evetric restorative resin composite were immersed by means of a silk string in each of the following solutions: Distilled water (solution A), phosphate buffer of pH?=?4.5 (solution B) and phosphate buffer of pH?=?6.8 (solution C). After storage for 7, 30 and 60 days’ period, the eluates were examined by means of High Performance Liquid Chromatography (HPLC) at each time interval. The storage of the resin composite specimens in the phosphate buffer solution demonstrated an inhibiting effect on the leaching pattern compared to the distilled water solution. The results of this study suggest that HPLC is a useful tool to investigate the effect of the pH value of phosphate buffer solution, which resembles saliva, on the leaching pattern of resin composites.     

Two-dimensional gel electrophoresis of platelet polypeptides with immobilized pH gradients in capillary tubes

Two-dimensional electrophoresis (2-DE) with immobilized pH gradient (IPG) gels in capillary tubes was used in the first-dimensional isoelectric focusing (IEF) for the separation of human platelet polypeptides. Two types of IPG tube gels, pH ranges 4-8 and 7-10, containing 8 M urea, 1% Nonidet P-40 and 0.1% pH 3.5-10 Ampholine carrier ampholytes (CA) were prepared by a simple method not requiring special equipment. The addition of CA to both gel and sample solutions was essential in the tube gel IPG system. Proteins were visualized by a modification of Wray's silver-staining technique. The degree of resolution and the number of spots observed on an IPG 2-DE gel with pH 4-8 were comparable with those obtained with O'Farrell's high-resolution 2-DE. Approximately 200 basic polypeptides, which are difficult to separate by conventional CA-based IEF 2-DE or the non-equilibrium pH gradient system, were well resolved by 2-DE with a pH 7-10 IPG tube gel in the first-dimension. The gel patterns with either pH gradient 4-8 or 7-10 were highly reproducible among gels prepared and run simultaneously. These results demonstrated the potential and usefulness of the 2-DE system with IPG gels in capillary tubes.     

A novel low-molecular-mass gelator with a redox active ferrocenyl group: tuning gel formation by oxidation

A novel low-molecular-mass gelator containing a redox-active ferrocenyl group, cholesteryl glycinate ferrocenoylamide (CGF), was intentionally designed and prepared. It was demonstrated that the gelator gels 13 out of the 45 solvents tested. Scanning electron microscopy (SEM) measurements revealed that the gelator self-assembled into different supramolecular network structures in different gels. Chemical oxidation of the ferrocenyl residue resulted in phase transition of the gel from gel state to solution state. FTIR and (1)H NMR spectroscopy studies revealed that hydrogen bonding between the gelator molecules in the gel was one of the main driving forces for the formation of the gels.