New global potential energy surface of the MgH2 system and dynamics studies of the reaction H + MgH → Mg + H2

A new global potential energy surface for the ground state of MgH₂ was constructed using the permutation invariant polynomial neural network method. About 70 000 ab initio energy points were calculated via the multi‐reference configuration interaction method method with aug‐cc‐pVTZ and aug‐cc‐pVQZ basis sets, and these points were used to construct the potential energy surface (PES). To avoid basis set superposition error, the basis set was extrapolated to the complete basis set limit using the two point energy extrapolation formula. The root mean square error of the present PES is only 8.85 meV. Initial state (v = 0, j = 0) dynamics studies were performed using the time‐dependent wave packet method with a second‐order split operator for the total angular momentum J up to a value of 50. Furthermore, the reaction probability, integral cross section, and thermal rate constant are reported and compared with available theoretical studies.     

Global X2A′ potential energy surface of Li2H and quantum dynamics of H + Li2 (X1Σg+) → Li + LiH (X1Σ+) reaction

A global potential energy surface (PES) for the electronic ground state of Li₂H system is constructed over a large configuration space. About 30 000 ab initio energy points have been calculated by MRCI‐F12 method with aug‐cc‐pVTZ basis set. The neural network method is applied to fit the PES and the root mean square error of the current PES is only 1.296 meV. The reaction dynamics of the title reaction has been carried out by employing time‐dependent wave packet approach with second order split operator on the new PES. The reaction probability, integral cross section and thermal rate constant are obtained from the dynamics calculation. In most of the collision energy regions, the integral cross sections are in well agreement with the results reported by Gao et al. The rate constant calculated from the new PES increases in the temperature range of present investigation.     

A global potential energy surface and time‐dependent quantum wave packet calculation of Au + H2 reaction

A global potential energy surface (PES) corresponding to the ground state of AuH₂ system has been constructed based on 22 853 ab initio energies calculated by the multireference configuration interaction method with a Davidson correction. The neural network method is used to fit the PES, and the root mean square error is only 1.87 meV. The topographical features of the novel global PES are compared with previous PES which is constructed by Zanchet et al. (Zanchet PES). The global minimum energy reaction paths on the two PESs both have a well and a barrier. Relative to the Au + H₂ reactants, the energy of well is 0.316 eV on the new PES, which is 0.421 eV deeper than Zanchet PES. The calculation of Au(²S) + H₂(X¹Σ_g⁺) → AuH(X¹Σ⁺) + H(²S) dynamical reaction is carried out on new PES, by the time‐dependent quantum wave packet method (TDWP) with second order split operator. The reaction probabilities, integral cross‐sections (ICSs) and differential cross‐sections are obtained from the dynamics calculation. The threshold in the reaction is about 1.46 eV, which is 0.07 eV smaller than Zanchet PES due to the different endothermic energies on the two PESs. At low collision energy (<2.3 eV), the total ICS is larger than the result obtained on Zanchet PES, which can be attributed to the difference of the wells and endothermic energies.     

Theoretical investigation of the structures and spectroscopic properties of (H2O4)n (n = 1–4) clusters

Density functional theory and ab initio calculations were performed to elucidate the hydrogen interactions in (H₂O₄)_n (n = 1–4) clusters. The optimized geometries, binding energies, and harmonic vibrational frequencies were predicted at various levels of theory. The trans conformer of the H₂O₄ monomer was predicted to be the most stable structure at the CCSD(T)/aug‐cc‐pVTZ level of theory. The binding energies per H₂O₄ monomer increased in absolute value by 9.0, 10.1, and 11.8 kcal/mol from n = 2 to n = 4 at the MP2/cc‐pVTZ level of theory (after the zero‐point vibrational energy and basis set superposition error corrections). This result implies that the intermolecular hydrogen bonds were stronger in the long‐chain clusters, that is, the formation of the longer chain in the (H₂O₄)_n clusters was more energetically favorable.     

Computational investigation of the adsorption and reactions of SiHx (x = 0–4) on TiO2 anatase (101) and rutile (110) surfaces

The adsorption and reactions of the SiH_x (x = 0–4) on Titanium dioxide (TiO₂) anatase (101) and rutile (110) surfaces have been studied by using periodic density functional theory in conjunction with the projected augmented wave approach. It is found that SiH_x (x = 0–4) can form the monodentate, bidentate, or tridentate adsorbates, depending on the value of x. H coadsorption is found to reduce the stability of SiH_x adsorption. Hydrogen migration on the TiO₂ surfaces is also discussed for elucidation of the SiH_x decomposition mechanism. Comparing adsorption energies, energy barriers, and potential energy profiles on the two TiO₂ surfaces, the SiH_x decomposition can occur more readily on the rutile (110) surface than on the anatase (101) surface. The results may be used for kinetic simulation of Si thin‐film deposition and quantum dot preparation on titania by chemical vapor deposition (CVD), plasma enhanced CVD, or catalytically enhanced CVD. © 2013 Wiley Periodicals, Inc.     

Comment “On the quadratic reaction path evaluated in a reduced potential energy surface model and the problem to locate transition states” [by J. M. Anglada,E. Besalú, J. M. Bofill,and R. Crehuet,J Comput Chem 2001, 22, 4, 387–406]

The difference is explained between steepest ascent and following a reduced gradient (distinguished coordinate method) for the location of saddle points. © 2001 John Wiley & Sons, Inc. J Comput Chem 22: 537–540, 2001     

An arsenate with the α‐CrPO4 structure type,NaCa1–xNi3–2xAl2x(AsO4)3 (x = 0.23): crystal structure,charge‐distribution and bond‐valence‐sum analyses

Since the discovery of electrochemically active LiFePO₄, materials with tunnel and layered structures built up of transition metals and polyanions have become the subject of much research. A new quaternary arsenate, sodium calcium trinickel aluminium triarsenate, NaCa_1–x Ni_3–2x Al_2x (AsO₄)₃ (x = 0.23), was synthesized using the flux method in air at 1023 K and its crystal structure was determined from single‐crystal X‐ray diffraction (XRD) data. This material was also characterized by qualitative energy‐dispersive X‐ray spectroscopy (EDS) analysis and IR spectroscopy. The crystal structure belongs to the α‐CrPO₄ type with the space group Imma . The structure is described as a three‐dimensional framework built up of corner‐edge‐sharing NiO₆, (Ni,Al)O₆ and AsO₄ polyhedra, with channels running along the [100] and [010] directions, in which the sodium and calcium cations are located. The proposed structural model has been validated by bond‐valence‐sum (BVS) and charge‐distribution (CHARDI) tools. The sodium ionic conduction pathways in the anionic framework were investigated by means of the bond‐valence site energy (BVSE) model, which predicted that the studied material will probably be a very poor Na⁺ ion conductor (bond‐valence activation energy ∼7 eV).     

1H, 13C and 15N NMR spectroscopic characterization of unexpected degradation products of the nifedipine analogue bis(2‐cyanoethyl) 2,6‐dimethyl‐4‐(2‐nitrophenyl)‐1,4‐dihydro‐3,5‐pyridinedicarboxylate

In the course of saponification experiments with bis(2‐cyanoethyl) 2,6‐dimethyl‐4‐(2‐nitrophenyl)‐1,4‐dihydro‐3,5‐pyridinedicarboxylate ( 1 ), an analogue of the calcium channel blocker nifedipine, three unexpected degradation products were isolated. The compounds were identified as 3‐(2‐acetamido‐1‐carboxy‐1‐propenyl)‐1‐hydroxy‐2‐indolecarboxylic acid ( 3 ), 9‐hydroxy‐1,3‐dimethyl‐β‐carboline‐4‐carboxylic acid ( 4 ) and 6‐hydroxy‐2,4‐dimethyl‐5‐oxo‐5,6‐dihydrobenzo[c][2,7]naphthyridine‐1‐carboxylic acid ( 6 ). The structures of these compounds were deduced from one‐ and two‐dimensional ¹H, ¹³C and natural abundance ¹⁵N NMR experiments (¹H,¹H‐COSY, gs‐HSQC, gs‐HMBC, ¹⁵N gs‐HMBC), and corroborated by comparison of their NMR data with the respective data for structurally similar compounds. Copyright © 2002 John Wiley & Sons, Ltd.     

Reply on the comment “On the quadratic reaction path evaluated in a reduced potential energy surface model and the problem to locate transition states” [by J. M. Anglada,E. Besalú, J. M. Bofill,and R. Crehuet,J Comput Chem 2001, 22, 4, 387–406]

Some concepts used in the explanation of the reduced gradient following algorithm are discussed and explained. © 2001 John Wiley & Sons, Inc. J Comput Chem 22: 541–544, 2001     

Electrospray ionization mass spectrometry of tributyltin(IV) complexes and their larvicidal activity on mosquito larvae: crystal and molecular structure of polymeric (Bu3Sn[O2CC6H4{NN(C6H3‐4‐OH(C(H)NC6H4OCH3‐4))}‐o])n

A series of tributyltin(IV) complexes of 2‐[(E)‐2‐(3‐formyl‐4‐hydroxyphenyl)‐1‐diazenyl]benzoic acid and 4‐[((E)‐1‐{2‐hydroxy‐5‐[(E)‐2‐(2‐carboxyphenyl)‐1‐diazenyl]phenyl}methylidene)amino]aryls have been investigated by electrospray mass spectrometry (ESI‐MS) and tandem mass spectrometry (MSⁿ) techniques. The assignments are facilitated by agreement between observed and calculated isotopic patterns and MSⁿ studies. Single‐crystal X‐ray crystallography of (Bu₃Sn[O₂CC₆H₄{N?N(C₆H₃‐4‐OH(C(H)?NC₆H₄OCH₃‐4))}‐o])_n reveals a polymeric structure. Toxicity studies of the tributyltin(IV) complexes of the 4‐[((E)‐1‐{2‐hydroxy‐5‐[(E)‐2‐(2‐carboxyphenyl)‐1‐diazenyl]phenyl}methylidene)amino]aryls on the second larval instar of the Aedes aegypti and Anopheles stephensi mosquito larvae are also reported. The LC₅₀ values indicate that the complexes are effective larvicides, which range from a low of 0.36 ppm to a high of 0.69 ppm against the Ae. aegypti larvae and between 0.82 and 1.17 ppm against the An. stephensi larvae. Copyright © 2005 John Wiley & Sons, Ltd.     

Fe3O4‐Methylene diphenyl diisocyanate‐guanidine (Fe3O4–4,4′‐MDI‐Gn): A novel superparamagnetic powerful basic and recyclable nanocatalyst as an efficient heterogeneous catalyst for the Knoevenagel condensation and tandem Knoevenagel‐Michael‐cyclocondensation reactions

In this paper, guanidine groups (Gn) supported on modified magnetic nanoparticles (Fe₃O₄–4,4′‐MDI) were synthesized for the first time. The catalyst synthesized was characterized by various techniques such as SEM (Scanning Electron Microscopy), TEM (Transmission electron microscopy), XRD ( X‐ray Diffraction ), TGA (Thermogravimetric ananlysis), EDS ( Energy‐dispersive X‐ray spectroscopy ) and VSM (vibrating sample magnetometer). The catalyst activity of modified MNPs–MDI‐Gn, as powerful basic nanocatalyst, was probed through the Knoevenagel and Tandem Knoevenagel–Michael‐cyclocondensation reactions. Conversion was high under optimal conditions, and reaction time was remarkably shortened. This nanocatalyst could simply be separated and recovered from the reaction mixture by simple magnetic decantation and reused many times without significant loss of its catalytic activity. Also, the nanocatalyst could be recycled for at least seven (Knoevenagel condensation) and six (Knoevenagel and Tandem Knoevenagel–Michael‐cyclocondensation) additional cycles after they were separated by magnetic decantation and, washed with ethanol, air‐dried, and immediately reused.     

Preparation of Ag‐doped g‐C3N4 Nano Sheet Decorated Magnetic γ‐Fe2O3@SiO2 Core–Shell Hollow Spheres through a Novel Hydrothermal Procedure: Investigation of the Catalytic activity for A3, KA2 Coupling Reactions and [3 + 2] Cycloaddition

Taking advantageous of both g‐C₃N₄ and magnetic core‐shell hollow spheres, for the first time a heterogeneous and magnetically separable hybrid system was prepared through a novel and simple hydrothermal procedure and used for immobilization of bio‐synthesized Ag(0) nanoparticles. The hybrid system was fully characterized by using SEM/EDS, FTIR, VSM, TEM, XRD, TGA, DTGA, ICP‐AES, BET and elemental mapping analysis. The catalytic utility of the obtained system, h‐Fe₂O₃@SiO₂/g‐C₃N₄/Ag, for promoting ultrasonic‐assisted A³, KA² coupling reactions and [3 + 2] cycloaddition has been confirmed. The results established that the catalyst could efficiently catalyze the reaction to afford the corresponding products in high yields in short reaction times. The reusability study confirmed that the catalyst could be recovered and reused for at least five reaction runs with only slight loss of the catalytic activity. The hot filtration test also proved low silver leaching, indicating the heterogeneous nature of the catalysis.     

A novel series of M(II) complexes of 6‐methylpyridine‐2‐carboxylic acid with 4(5)methylimidazole: Synthesis,crystal structures, α‐glucosidase activity,density functional theory calculations and molecular docking

Novel complexes of 6‐methylpyridine‐2‐carboxylic acid and 4(5)methylimidazole, namely [Mn(6‐mpa)₂(4(5)MeI)₂] ( 1 ), [Zn(6‐mpa)₂(4(5)MeI)₂] ( 2 ), [Cd(6‐mpa)₂(4(5)MeI)₂] ( 3 ), [Co(6‐mpa)₂(4(5)MeI)₂] ( 4 ), [Ni(6‐mpa)₂(4(5)MeI)(OAc)] ( 5 ) and [Cu(6‐mpa)₂(4(5)MeI)] ( 6 ), were synthesized for the first time. The structures of complexes 1 – 4 and complexes 5 and 6 were determined using X‐ray diffraction and mass spectrometric techniques, respectively. The experimental spectral analyses for these complexes were performed using Fourier transform infrared and UV–visible techniques. The α‐glucosidase inhibition activity values (IC₅₀) of complexes 1 – 6 were identified in view of genistein reference compound. Moreover, the DFT/HSEh1PBE/6‐311G(d,p)/LanL2DZ level was used to obtain optimal molecular geometry and vibrational wavenumbers for complexes 1 – 6 . Electronic spectral behaviours and major contributions to the electronic transitions were investigated using TD‐DFT/HSEh1PBE/6‐311G(d,p)/LanL2DZ level with conductor‐like polarizable continuum model and SWizard program. Finally, in order to investigate interactions between the synthesized complexes ( 1 – 6 ) and target protein (template structure S. cerevisiae isomaltase), a molecular docking study was carried out.