2,4,5,7-Tetranitrofluorescein in solutions: novel type of tautomerism in hydroxyxanthene series as detected by various spectral methods

Stepwise dissociation and tautomerism of 2,4,5,7-tetranitrofluorescein (TNF) were studied by using vis-spectroscopy in dimethylsulfoxide (DMSO), in aqueous acetone, and in cetyl-trimethylammonium chloride (CTAC) micellar solutions at ionic strength of the bulk phase 4.00M KCl. The pK(a) values in DMSO and 90 mass% (CH3)2CO as well as the 'apparent'pK(a)(a) values of the substance in micellar media were determined spectrophotometrically. The neutral (molecular) form H2R is found to be completely converted into the colorless lactone. Moreover, the lactonic structure, yellow due to 'nitrophenolate' absorption band, predominates also in the case of TNF dianion R2-. Contrary to the unsubstituted fluorescein, and like 2,4,5,7-tetrabromofluorescein (eosin), the monoanion HR- of TNF with lambda(max) 522-525 nm and E(max) approximately (60-62)x10(3) dm(3)mol(-1)cm(-1) exists mainly as a deeply and intensively colored structure with non-ionized carboxylic and ionized hydroxylic group; its fluorescence spectra in various media are registered. In 90% acetone, the Stokes shift is 1.17x10(3)cm(-1), fluorescence lifetime equals 2.3 ns. An extremely expressed trend to dianion-lactone formation of R2- ion of TNF is confirmed in the systems studied. For TNF in DMSO, in aqueous acetone, in surfactant micelles, and in trichloromethane extracts of ionic associatiates with N(n-Bu)4+ and N(n-Hept)4+, the deeply colored 'quinon-phenolate' dianion, typical for all hydroxyxanthenes, is not registered at all. The sequence of dissociation of functional groups in solution is confirmed using IR spectroscopy in DMSO.     

Intramolecular stable carbon isotopic analysis of archaeal glycosyl tetraether lipids

Glycolipids are prominent constituents in the membranes of cells from all domains of life. For example, diglycosyl‐glycerol dibiphytanyl glycerol tetraethers (2Gly‐GDGTs) are associated with methanotrophic ANME‐1 archaea and heterotrophic benthic archaea, two archaeal groups of global biogeochemical importance. The hydrophobic biphytane moieties of 2Gly‐GDGTs from these two uncultivated archaeal groups exhibit distinct carbon isotopic compositions. To explore whether the isotopic compositions of the sugar headgroups provide additional information on the metabolism of their producers, we developed a procedure to analyze the δ¹³C values of glycosidic headgroups. Successful determination was achieved by (1) monitoring the contamination from free sugars during lipid extraction and preparation, (2) optimizing the hydrolytic conditions for glycolipids, and (3) derivatizing the resulting sugars into aldononitrile acetate derivatives, which are stable enough to withstand a subsequent column purification step. First results of δ¹³C values of sugars cleaved from 2Gly‐GDGTs in two marine sediment samples, one containing predominantly ANME‐1 archaea and the other benthic archaea, were obtained and compared with the δ¹³C values of the corresponding biphytanes. In both samples the dominant sugar headgroups were enriched in ¹³C relative to the corresponding major biphytane. This ¹³C enrichment was significantly larger in the putative major glycolipids from ANME‐1 archaea (～15‰) than in those from benthic archaea (<7‰). This method opens a new analytical window for the examination of carbon isotopic relationships between sugars and lipids in uncultivated organisms. Copyright © 2010 John Wiley & Sons, Ltd.     

Controlled hydrothermal synthesis and structural characterization of a nickel selenide series

A series of nickel selenides (NiSe2 microcrystals, Ni(1-x)Se and Ni3Se2 microspheres) has been successfully synthesized through a convenient, low-temperature hydrothermal method. A good nucleation and growth environment has been created by forming a uniform and transparent solution reaction system. The compositions (including the x value of Ni(1-x)Se), phase structures, as well as the morphologies of nickel selenides, can be controlled by adjusting the Ni/Se ratio of the raw materials, the pH, the reaction temperatures and times, and so forth. The newly produced Se microspheres in the system have been used as both reactant and in situ template to the Ni(1-x)Se microspheres. It is found that Ni(1-x)Se microspheres act as the intermediate precursor during the formation of Ni3Se2 microspheres. Under certain conditions, hexagonal NiSe microspheres can be converted into rhombohedral NiSe nanowires in solution. The formation mechanisms of a series of nickel selenides has been investigated in detail by means of X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses. This work has provided a general, simple, and effective method to control the composition, phase structure, and morphology of metal selenides in aqueous solution, which will be important for inorganic synthesis methodology and further applications of selenides.     

Combination of lacunary polyoxometalates and high-nuclear transition metal clusters under hydrothermal conditions: IX. a series of novel polyoxotungstates sandwiched by octa-copper clusters

The reaction of CuCl(2).2 H2O with trivacant Keggin polyoxoanions K8Na2[A-alpha-GeW9O34].25 H2O or K10[A-alpha-SiW9O34].25 H2O in the presence of 1,2-diaminopropane (dap), ethylenediamine (en) or 2,2'-bipyridine (2,2'-bpy) under hydrothermal conditions afforded five novel hybrid inorganic-organic octa-Cu sandwiched polyoxotungstates (POTs): H4[CuII8(dap)4(H2O)2(B-alpha-GeW9O34)2].13 H2O (1), (H2en)2[CuII8-(en)4(H2O)2(B-alpha-GeW9O34)2].5 H2O(2), (H2en)2[CuII8(en)4(H2O)2(B-alpha-SiW9-O34)2].8 H2O (3), [CuII(H2O)2]H2[CuII8-(en)4(H2O)2(B-alpha-SiW9O34)2] (4), and [CuII2(H2O)2(2,2'-bpy)2]{[CuII(bdyl)]2-[CuII8(2,2'-bpy)4(H2O)2(B-alpha-GeW9-O34)2]}.4 H2O (bdyl=2,2'-bipyridinyl)(5). Additionally, CuCl(2).2 H2O reacts with the mixture of GeO2, Na2WO(4).2 H2O, H2SiW12O(40).2 H2O in the presence of 2,2'-bpy and 4,4'-bpy under hydrothermal conditions leading to another novel mixed-valent octa-Cu sandwiched POT hybrid: [CuI(2,2'-bpy)(4,4'-bpy)]2[{CuI2(2,2'-bpy)2(4,4'-bpy)]2[CuI2CuII6(2,2'-bpy)2(4,4'-bpy)2(B-alpha-GeW9O34)2}].2 H2O (6). 1, 2, and 3 are discrete dimers constructed from two trivacant Keggin [B-alpha-XW9O34]10- (X=GeIV/SiIV) fragments and an octa-Cu cluster whereas 4 displays the 3D (3,6)-connected nets with (4.6(2))(4(2).6(4).8(7).10(2)) topology, which are built by octa-Cu sandwiched polyoxometalate building blocks through copper cation bridges. 5 is a novel 2D layer based on octa-Cu sandwiched POT clusters and [CuII2(bdyl)] units. Interestingly, the rollover metalation of 2,2'-bpy is firstly observed in the system containing the copper complex under hydrothermal conditions. 6 is a discrete mixed-valent octa-Cu sandwiched POT supported by two CuI-complexes [CuI2-(2,2'-bpy)2(4,4'-bpy)]2+ through 4,4'-bpy bridges, which constructs a novel dodeca-copper cluster. Notably, the octa-Cu cluster in 6 is mixed-valent and is different from those in 1-5. To our knowledge, 1-6 represent a rare family of POTs incorporating novel octa-nuclear transition-metal clusters in polyoxometalate chemistry. They were structurally characterized by FT-IR spectra, elemental analysis, thermogravimetric analysis, and single-crystal X-ray diffraction. The magnetic properties of 1, 4, and 5 were quantitatively analyzed by the MAGPACK software package.     

NMR of a series of novel hydroxyflavothiones

Alkylated hydroxyflavothiones, namely flavothione, 5‐hydroxyflavothione, 5,7‐dihydroxyflavothione (chrysinthione), 7‐dodecyloxy‐5‐hydroxyflavothione, 7‐butyloxy‐5‐hydroxyflavothione, 2′,3,4′,7‐tetramethoxy‐5‐hydroxyflavothione, 3,3′,4′,7‐tetramethoxy‐5‐hydroxyflavothione, 7‐butyloxy‐4′,5‐dihydroxyflavothione and 7‐butyloxy‐4′,5‐hydroxyflavanonethione have been synthesized from the corresponding hydroxyflavones in two steps, alkylation of the non‐hydrogen‐bonded hydroxyl groups by bromoalkanes or dimethyl sulfate followed by conversion of the carbonyl group to a thione using Lawesson's Reagent under microwave irradiation and solvent‐free conditions. Part of the alkylated flavanone, 7‐butyloxy‐4′,5‐dihydroxyflavanone, was oxidized during the treatment with Lawesson's reagent to yield a second product 7‐butyloxy‐4′,5‐dihydroxyflavothione in addition to the target product butyloxy‐4′,5‐hydroxyflavanonethione. Deuterium isotope effects on 13C chemical shifts have been measured in hydroxyflavones, isoflavones, flavanones and the thio analogs. Formal four‐bond deuterium isotope effects on 13C chemical shifts, nΔC?S(OD) are very sensitive to variations in structures and substitution patterns. Density functional theory (DFT) calculations are carried out to obtain geometries. Correlations relating distances around the hydrogen bond system to the deuterium isotope effects on 13C chemical shifts are discussed. 13C chemical shifts are calculated by DFT methods. Effects of thiocarbonyl anisotropies are suggested. Copyright © 2009 John Wiley & Sons, Ltd.     

Thermotropic phase behaviour of mixed liposomes of archaeal diether and conventional diester lipids

During preformulation studies of pharmaceutical solid dosage forms, thermal analysis techniques are very useful to detect physical or chemical incompatibilities between the drug and adjuvants of interest that might interfere with efficacy and safety of the final drug product. Differential scanning calorimetry (DSC) and thermogravimetry (TG) are useful tools for this purpose. The aim of this study was to investigate the thermoanalytical behavior of olanzapine (OLZ) when mixed with several excipients commonly used in solid dosage forms such as microcrystalline cellulose, croscarmellose, dicalcium phosphate dihydrate (DCPD), lactose, magnesium stearate, and povidone. Following DSC and TG analyses, powder X-ray diffraction tests were carried out. Thermoanalytical methods showed evidence of interaction between OLZ and magnesium stearate, lactose, and povidone. These results can be useful during the selection of excipients for pharmaceutical formulation development.     

Preparation and characterization of a novel zeolite using hydrothermal synthesis in a stirred reactor

This paper describes the preparation of novel zeolite particles by the hydrothermal method in a stirred reactor. The variations between certain properties of the resulting zeolites, such as morphology by the scanning electron microscopy (SEM), pore properties (i.e., surface areas, pore volume, and porosity) by the surface area & porosity analyzer, crystallinity by the X-ray diffraction (XRD) and Si/Al ratio by the inductively coupled plasma-atomic absorption spectrometer (ICP-AES), and the process parameters, such as aging time, agitation speed, temperature and pressure, were studied at a specific gel composition. The optimal value of the Brunauer–Emmett–Teller (BET) surface area was found to be over 400 m²/g in the resulting microporous zeolite, indicating that the size was centered on about 0.5 nm. The XRD image was indicative of the probable formation of zeolite-P2 in the hydrothermal synthesis.     

Toward a novel series of furanopyrimidine nucleoside analogues

Based on an unusual furanose ring opening of 1,2-O-isopropylidene pentofuranoside derivatives, a preparation scheme of a new series of furanopyrimidine nucleoside analogues has been devised.     

New series of indium formates: hydrothermal synthesis, structure and coordination modes

Three new indium(III) compounds, In(HCOO)3 (1), In2(HCOO)5(OH) (2), and In(HCOO)2(OH) (3), were synthesized under hydrothermal conditions and characterized by single crystal and powder X-ray diffraction experiments, as well as by IR spectroscopy, elemental analysis, and coupled TG-DSC-MS measurement. All of these compounds adopt 3D framework structures consisting of InO6 octahedra and the 2.11 binding modes of formate with the (syn, syn-; syn, anti-; anti, anti-) configurations. The structural investigation of these indium formates reveals that the gradual introduction of the hydroxyl groups into the structures induces the polymerization of the InO6 octahedra, that is, InO6 is isolated in 1, becomes dimeric in 2, and finally forms 1D chains in 3. In addition, a simple formula that may be used for estimating the overall coordination number of the formate in Ma(HCOO)bLc is proposed.     

Polyspiro disilacyclohexadienes a novel series of compounds showing spiroconjugation

Three novel unsaturated spirocompounds with silicon as spiro atom(s) have been prepared. These constitute the first series of “polyspirene” and show interesting spectral properties.     

One-step synthesis of a novel carbon-based strong acid catalyst through hydrothermal carbonization

Abstract  

A novel carbon-based strong acid catalyst was synthesized through the one-step hydrothermal carbonization of furaldehyde and p-toluenesulfonic acid (PTSA) in aqueous solution at 180 °C for only 4 h. The novel carbon-based solid acid possessed high acidity, and the catalytic activities were investigated by esterification and oxathioketalization. The results showed that the novel catalyst demonstrated much greater activity than the traditional solid acids and was comparable to sulfuric acid. The one-step method provides an efficient procedure for the synthesis of various functionalized carbons by one-step hydrothermal carbonization.     

Preparations, structures, and magnetic properties of a series of novel copper(II)-lanthanide(III) coordination polymers via hydrothermal reaction

The hydrothermal reaction of Ln2O3 (Ln = Er, Gd, and Sm), pyridine-2,5-dicarboxylic acid (H2pydc), and Cu(II) reagents (CuO, Cu(OAc)2-2H2O, or CuCl2-2H2O) with a mole ratio of 1:2:4 resulted in the formation of six polymeric Cu(II)-Ln(III) complexes, [(Ln2Cu3(pydc)6(H2O)12)-4H2O]n (Ln = Er (1); Ln = Gd (2)), [(Ln4Cu2(pydc)8(H2O)12)-4H2O]n (Ln = Sm (3); Ln = Gd (4); Ln = Er (5)), and [(Gd2Cu2(pydc)4(H2O)8)-Cu(pydc)2-12H2O]n (6). 1 and 2 are isomorphous and crystallize in triclinic space group Ponebar. Compounds 3-5 are isomorphous and crystallize in monoclinic space group P2(1)/c. Compound 6 crystallizes in triclinic space group Ponebar. Complexes 1 and 2 have one-dimensional zigzag chain structures and compounds 3-5 display three-dimensional wavelike polymeric structures, while 6 has an infinite sandwich-type structure. The different structures of the complexes are induced by the different forms of Cu(II) reagents; the reactions of Cu(OAc)2-2H2O yield high Cu/Ln ratio products 1, 2, and 6, while the reactions of CuO or CuCl2-2H2O/2,2'-bipyridine results in low Cu/Ln ratio compounds 3-5. Temperature-dependent magnetic susceptibilities for 2, 4, and 5 were studied, and the thermal stabilities of complexes 2 and 4 were examined.     

Physicochemical properties affecting lipofection potency of a new series of 1,2-dialkoylamidopropane-based cationic lipids

The in vitro transfection activity of a novel series of N,N'-diacyl-1,2-diaminopropyl-3-carbamoyl-(aminoethane) derivatives was evaluated against a mouse melanoma cell line at different +/- charge ratios, in the presence and absence of helper lipids. Only the unsaturated derivative N,N'-dioleoyl-1,2-diaminopropyl-3-carbamoyl-(aminoethane), (1,2lmp[5]) mediated significant increase in the reporter gene level which was significantly boosted in the presence of DOPE peaking at +/- charge ratio of 2. The electrostatic interactions between the cationic liposomes and plasmid DNA were investigated by gel electrophoresis, fluorescence spectroscopy, dynamic light scattering and electrophoretic mobility techniques. In agreement with the transfection results, 1,2lmp[5]/DOPE formulation was most efficient in associating with and retarding DNA migration. The improved association between the dioleoyl derivative and DNA was further confirmed by ethidium bromide displacement assay and particle size distribution analysis of the lipoplexes. Differential scanning calorimetry studies showed that 1,2lmp[5] was the only lipid that exhibited a main phase transition below 37 degrees C. Likewise, 1,2lmp[5] was the only lipid found to form all liquid expanded monolayers at 23 degrees C. In conclusion, the current findings suggest that high in vitro transfection activity is mediated by cationic lipids characterized by increased acyl chain fluidity and high interfacial elasticity.     

Synthesis and characterization of a novel series of unsymmetrical porphyrins

A novel series of unsymmetrical porphyrins with aldehyde group at the terminal of the linkage which connected to meso-phenyl through acylamide bond have been synthesized and structurally characterized by IR,~1H NMR,MS,UV-vis,fluorescence.     

Synthesis of a novel series of 4,4-disubstituted 2,3,4,7-tetrahydroazepines

A general, simple and straightforward strategy for the synthesis of a novel series of 4,4-disubstituted 2,3,4,7-tetrahydroazepines is described. This route involves a one-pot Wittig olefination/N-allylation process on a five-membered hemi-aminal followed by a final ring closing metathesis reaction.     

Construction of higher-ordered monolayer membranes derived from archaeal membrane lipid-inspired cyclic lipids with longer alkyl chains

A series of artificial cyclic lipids that mimic archaeal membrane ones has been synthesized. The structural features of these molecules include a longer cyclic framework, in which the alkyl chain length ranges from 24 to 32 in carbon number, which is longer than our first analogous molecule with 20-carbon long alkyl chains [K. Miyawaki, T. Takagi, M. Shibakami, Synlett 8 (2002) 1326]. Microscopic observation reveals that these molecules have a self-assembling ability: hydration of the lipids yields multilamellar vesicles in aqueous solution and monolayer sheets on solid supports. High-sensitivity differential scanning calorimetry (24- and 28-carbon alkyl chain lipids) indicates that (i) the alkyl chain length affects their phase behavior and (ii) the enthalpies of endothermic peaks accompanied by phase transition were considerably lower than those of their monomeric phospholipid analogs. Fluorescence polarization measurements suggest that the membranes made from the 24-carbon alkyl chain lipid have a higher polarization factor than membranes composed of DMPC and DMPC plus cholesterol. These findings imply that the cyclic lipids containing 24- and 28-carbon alkyl chain construct well-organized monolayer membranes and, in particular, that the molecular order of the 24-carbon alkyl chain lipid is higher than that of bilayer membranes in the liquid-ordered phase.