共查询到19条相似文献,搜索用时 187 毫秒
1.
无透镜傅里叶变换数字全息波前重建主要采用全息图的一次快速傅里叶变换方法,重建图像不能充分占有重建平面.本文基于像平面滤波技术,提出对物体局部区域光波场进行放大重建并让重建图像布满重建平面的方法,给出具有精细结构物体的数字全息波前重建实例.此外,将数字全息光波场重建视为具有方形出射光瞳的光学系统的相干光成像过程,导出了物体放大图像的分辨率与光学系统相关参量的关系,并通过实验给予证明. 相似文献
2.
将数字全息检测物体表面视为散射面,球面波为参考波,使用角谱重建算法对不同波长照明情况下物平面光波场重建位置进行研究.结果表明,不考虑图像的物理意义时,衍射的一次傅里叶变换重建像中心与物光场频谱的中心相对应,以一次傅里叶变换重建像为参考,可以较好地确定物光场频谱位置,按照可变放大率的角谱重建算法实现不同色光重建场的准确重叠. 相似文献
3.
4.
令物体表面为散射面,参考光及重建光为球面波,详细研究了离轴数字全息物光场重建平面的光波场.导出物光、共轭物光及零级衍射光分布与光学系统参数的关系.根据彩色数字全息的特点,提出抑制零级衍射干扰的光学系统设计方法,并且对一种能够避免插值误差的波面重建算法进行了优化研究,给出了相应的实验证明. 相似文献
5.
6.
7.
8.
角谱衍射公式的快速傅里叶变换计算及在数字全息波面重建中的应用 总被引:4,自引:0,他引:4
从取样定理出发,对角谱衍射公式及逆运算的快速傅里叶变换(FFT)进行了研究.基于研究结果.讨论数字全息研究中物光通过一个光学系统到达CCD探测器的波面重建问题.提出物光场的逆运算追迹重建及像空间波面重建两种方法.最后,通过数字全息实验及波面重建计算,对两种波面重建方法的可行性作出证明. 相似文献
9.
菲涅耳数字全息成像系统的脉冲响应分析 总被引:1,自引:1,他引:0
数字全息成像由CCD记录数字全息图后经过计算机数值重建物光波场,这个过程从傅里叶变换角度看等同于数字全息图的频谱分析。讨论了数字成像系统的脉冲响应函数,并分别推导了其实像、虚像、零级像在平面波和球面波照射下的波前复振幅分布。结果表明,实像和虚像是移位的夫琅和费衍射分布,而零级像是CCD光瞳的菲涅耳衍射分布,且与参考光波前分布无关。 相似文献
10.
11.
Francisco Palacios Daniel Palacios Edison Gonçalves Laszlo Sajo-Bohus 《Optics Communications》2008,281(4):550-558
In this paper, processing methods of Fourier optics implemented in a digital holographic microscopy system are presented. The proposed methodology is based on the possibility of the digital holography in carrying out the whole reconstruction of the recorded wave front and consequently, the determination of the phase and intensity distribution in any arbitrary plane located between the object and the recording plane. In this way, in digital holographic microscopy the field produced by the objective lens can be reconstructed along its propagation, allowing the reconstruction of the back focal plane of the lens, so that the complex amplitudes of the Fraunhofer diffraction, or equivalently the Fourier transform, of the light distribution across the object can be known. The manipulation of Fourier transform plane makes possible the design of digital methods of optical processing and image analysis. The proposed method has a great practical utility and represents a powerful tool in image analysis and data processing. The theoretical aspects of the method are presented, and its validity has been demonstrated using computer generated holograms and images simulations of microscopic objects. 相似文献
12.
为提高数字全息再现像视角,提出一种基于滤波成像的数字全息技术来实现大视角的三维物体面型测量.利用离轴像面数字全息技术,通过在4F相干图像处理系统的空间频谱面处放置可移动的低通滤波器,使满足CCD分辨率的物光波与参考光波干涉形成全息图,并控制低通滤波及成像区域分别记录不同谱段的子全息图.再现时,首先对子全息图进行数字傅里叶变换,重构对应频谱段,并对频谱段进行拼接形成完整的物光频谱|而后通过数字再现获得大视角的数字全息再现像.利用该方法测量了圆柱形表面(光滑的缝纫针)的三维形貌,并取得了较好的实验结果. 相似文献
13.
In this paper, a new simplified technique for effectively eliminating the zero order and the conjugate virtual image in digital holographic microcopy, which makes use of two-step phase-shifting method of just recording two holograms and an intensity image of object wave, is proposed. Meanwhile, combined with the principle of making full use of spatial bandwidth of the CCD sensor by in-line lens-less Fourier holographic recording geometry, the theory and experimental methods to increase the resolution of the reconstructed image in digital holography by using phase-shifting technique are detailedly analyzed. At end, the validity and availability of this technique has been demonstrated through the off-axis and in-line Fourier transform recording geometry. The study provides some theoretical and experimental guidance for the design and operation of a digital holographic microscopy system. 相似文献
14.
利用相位模板实现数字全息超分辨成像 总被引:2,自引:2,他引:0
为了简化数字全息超分辨记录系统,分别在其物光和参考光部分引入一块相位模板,以获得垂直和倾斜方向照明物体的光束和具有不同载波频率的参考光束.当这些具有不同照射方向的光透过物体后,可以使CCD在位置固定的情况下记录到携带低频和高频信息的物体衍射场,不同载波频率的参考光则保证了高频和低频信息在复合全息图的频谱面上能够相互分离.实验结果证明,通过将记录到的物体高频和低频信息合成,可以获得超出系统衍射极限分辨率的再现像. 相似文献
15.
Phase aberration compensation of digital holographic microscopy based on least squares surface fitting 总被引:1,自引:0,他引:1
Jianglei Di Jianlin Zhao Weiwei Sun Hongzhen Jiang Xiaobo Yan 《Optics Communications》2009,282(19):3873-3877
Digital holographic microscopy allows the numerical reconstruction of the complex wavefront of samples, especially biological samples such as living cells. In digital holographic microscopy, a microscope objective is introduced to improve the transverse resolution of the sample; however a phase aberration in the object wavefront is also brought along, which will affect the phase distribution of the reconstructed image. We propose here a numerical method to compensate for the phase aberration of thin transparent objects with a single hologram. The least squares surface fitting with points number less than the matrix of the original hologram is performed on the unwrapped phase distribution to remove the unwanted wavefront curvature. The proposed method is demonstrated with the samples of the cicada wings and epidermal cells of garlic, and the experimental results are consistent with that of the double exposure method. 相似文献
16.
Digital holographic imaging fusion for a larger size object using compressive sensing is proposed. In this method, the high frequency component of the digital hologram under discrete wavelet transform is represented sparsely by using compressive sensing so that the data redundancy of digital holographic recording can be resolved validly, the low frequency component is retained totally to ensure the image quality, and multiple reconstructed images with different clear parts corresponding to a laser spot size are fused to realize the high quality reconstructed image of a larger size object. In addition, a filter combing high-pass and low-pass filters is designed to remove the zero-order term from a digital hologram effectively. The digital holographic experimental setup based on off-axis Fresnel digital holography was constructed. The feasible and comparative experiments were carried out. The fused image was evaluated by using the Tamura texture features. The experimental results demonstrated that the proposed method can improve the processing efficiency and visual characteristics of the fused image and enlarge the size of the measured object effectively. 相似文献
17.
The phase reconstruction in a digital in-line holographic microscopy is compared using two numerical reconstruction methods. The first method uses one Fourier transform and second one uses three Fourier transforms. It is shown that the latter method gives improved object phase reconstruction as compared to the former. 相似文献
18.
19.
在数字全息成像中,散斑噪声严重影响了再现像的信噪比和成像分辨率,因此为了提高数字全息成像质量,迫切需要抑制再现像的散斑噪声.分析并给出了矩形散射光斑的强度协方差,定量计算了特定实验条件下产生退相关散斑图样的最小角度差.结合透镜的性质设计并搭建了多角度无透镜傅里叶变换数字全息成像系统,利用光纤端面在透镜焦平面的二维机械移动代替传统反射镜的旋转,使照明光束在不改变照明位置和大小的同时,可任意改变光束方向.移动光纤端面使多角度照明满足最小角度差,获取了81幅数字全息图.利用单次快速傅里叶逆变换实现数值再现,对多幅再现像的强度像求平均,实验结果表明散斑对比度降低为单幅再现像的14.6%,使图像信噪比提高了6.9倍.该抑制散斑的多角度数字全息成像方法有效的抑制了散斑噪声,且成像光路结构简单,可操作性强. 相似文献