二阶总广义变分图像放大

提出了一种在相移数字全息中提取相移角的方法.该方法通过在相移数字全息中引入随机相位板对物光波的相位进行调制,使得物光波在全息面上的相位分布成为近似理想的随机分布,进而根据这种随机分布的统计性质对相移角进行提取.计算机模拟结果表明,该方法提取出的相移角与设定的相移角之间的相对误差小于千分之一.同时,经过对比采用随机相位板和不采用随机相位板的计算结果发现,物体衍射光波在全息面上的相位分布具有一定的相关性.     

一种在二步相移数字全息中实现准确相移的方法

相移数字全息中的相移准确性决定了重建结果的质量,本文提出了在二步相移数字全息中实现准确相移的方法.该方法使用数字电压源开环控制普通的压电陶瓷微位移器,通过连续以微小的间隔来改变施加在压电陶瓷微位移器上的电压,可以获得一系列对应于不同相移角的全息图像,进而可以利用这些全息图像重建出来物光波在全息面上的强度分布.实验中采用已被CCD直接记录的物光波在全息面上的强度分布作为标准来评价前面重建结果的质量,计算了这些重建结果和评价标准之间的相关系数,结果表明相关系数达到最大时对应的全息图具有准确的相移角π/2.实验中比较了使用所确定准确相移角和理论相移角分别重建出来物光波的质量,计算机模拟和实验的结果证实了该方法的有效性.     

一种在二步相移数字全息中实现准确相移的方法

相移数字全息中的相移准确性决定了重建结果的质量,本文提出了在二步相移数字全息中.实现准确相移的方法.该方法使用数字电压源开环控制普通的压电陶瓷微位移器,通过连续以微小的间隔来改变施加在压电陶瓷微位移器上的电压,可以获得一系列对应于不同相移角的全息图像,进而可以利用这些全息图像重建出来物光波在全息面上的强度分布.实验中采...     

两步相移数字全息物光重建误差分析与校正

系统研究了两步相移数字全息干涉术中相移误差引起的波前再现误差的计算和校正方法. 基于衍射物光相位分布的随机性和振幅相位的相互独立性原理,介绍了相移数字全息中物光波前再现误差的表达形式,推导出步长为π/2的两步算法中物光重建误差的表达式. 通过进一步分析这一重建误差的结构和特点,结合物光表达式,给出了自动校正相移误差引起的波前重建误差的校正方法. 该方法无需增加测量,在未知相移误差大小的情况下,只对标准两步相移算法恢复的物光复振幅进行处理就可以实现对物光振幅和相位的同时校正. 计算机模拟结果表明,校正后可将 关键词： 相移干涉术 数字全息 物光重建 误差校正     

四步相移数字全息中随机误差的抑制方法

提出一种在四步相移数字全息中消除随机相移误差及CCD噪声的方法。通过多次重复四步相移数字全息的实验过程,使得每一步的相移都有多幅全息图像与之对应,把每一步对应的多幅全息图像进行数学平均就会得到4幅全息均值图像。理论分析表明,使用这4幅全息均值图像进行数字全息的重建,可以得到精确的物光波的分布,有效地消除随机相移误差及CCD噪声的影响。计算机模拟结果表明:该方法有助于提高数字全息重建光场质量。     

基于光程差扫描的低相干离轴数字全息术

针对在低相干离轴数字全息术中,光源相干长度限制物光波可探测面积的问题,提出了一种基于光程差扫描的低相干离轴数字全息记录方法.首先,通过改变参考光和物光波之间的光程差,使得干涉条纹扫描记录平面的不同区域,而后对各个区域的数字全息图采用数值再现的方法获取不同区域处的物光波相位分布,最后采用相位拼接技术拼接各个区域的相位分布实现物光波的全视场探测.     

同轴相移数字全息中相移角的选取及相移误差的消除

基于两步同轴相移数字全息,首先从理论上分析了记录时不同相移角的选取及相移误差对再现像的影响,并给出了一种利用再现像所有抽样点的强度偏差之和作为评价标准,通过逐步改变理论设定相移角值来寻找实际相移角的相移误差消除新方法;其次对二步相移数字全息中记录时参考光波最佳相移角的选取作了计算机模拟,发现只有将参考光波的相移角选择在一定范围内,再现像的噪声较小;最后利用计算机模拟了相移误差消除,验证了所提方法的可行性.     

基于干涉原理的虚拟光学加密系统

提出了一种虚拟光学加密系统。该光学加密系统采用了同轴全息技术的基本架构,将被加密图像作为被记录物体,而在参考光波及干涉场光路中分别引入两个独立的随机相位板,全息面上的输出即为加密结果,这两个随机相位板即为加密及解密所用密钥。理论分析表明,在恰当设置物光波与参考光波衍射场比例的情况下,任意一灰度图像均可被加密为平稳的复随机白噪声,可以抵御盲反卷积攻击。采用计算机模拟,证实了该系统的加密效果及对抗暴力攻击的能力。研究了解密时附加参数及噪音攻击对解密结果的影响,结果表明本系统抗噪音攻击能力一般,但对附加参数有极高的敏感性。     

基于双色LED芯片的双波长像面数字全息显微术

提出了一种基于双色LED芯片的双波长像面数字全息显微术。将主波长为670nm的红光芯片和主波长为521nm的绿光芯片封装成半球型LED芯片,然后利用彩色CCD相机获取被测样品在两种照明光波下的彩色相移数字全息图,最后采用色彩分离技术、相移技术及双波长相位提取技术获取被测样品的相位分布及面型分布。实验结果证明了本文方法的可行性。     

基于相位恢复和数字全息的音频水印

提出了一种在数字全息技术中引入相位恢复算法的音频水印方法.用水印图像经相位恢复处理形成虚拟物光波与参考光波干涉,得到高对比度的傅里叶变换全息图.利用量化算法和离散余弦变换把数字全息图嵌入音频信号中,在水印提取过程中不需要原始音频信号的参与,并且采用密钥加强了水印的安全性.数值计算实验表明:该算法对有损压缩、重采样、低通滤波、噪音干扰等常用音频信号攻击均具有很好的稳健性.     

基于菲涅耳波带板扫描全息术的光学层析成像

基于光学扫描全息术原理和编码孔径层析成像技术,提出了一种三维物体层析成像技术——菲涅耳波带板扫描全息术。该技术通过将物体的光强分布函数与菲涅耳波带板的光强分布函数进行卷积运算来得到物体的扫描全息图,通过相关解卷积的方法来进行扫描全息图的数字重建。依据该技术原理设计了实验系统,系统结构简单紧凑,具有三维物体层析成像功能。提出用数字高通滤波器来减少重建图像的背景噪声。计算机仿真及对实物的扫描记录和重建实验结果表明,该技术原理正确,用于三维物体层析成像是可行的,用数字高通滤波的方法提高重建图像的对比度是有效的。     

Anisotropic edge enhancement in optical scanning holography with spiral phase filtering

Anisotropic edge enhancement is simulated using a spiral phase plate(SPP) in optical scanning holography(OSH). We propose to use a delta function and an SPP as the pupil functions to realize anisotropic edge enhancement. The interference of these two pupils is used to two-dimensionally scan an object to record its edge-only information. This is done in three ways: first, by shifting the SPP, second, by using two offset SPPs of same charge, and finally, by using two oppositely charged SPPs. Our computer simulations show the capability of selectively enhancing the edges of a given object.     

Analysis of Phase Measurement Errors in Electro-Optic Holography

This paper presents the results of an error analysis in electro-optics holography. These errors include phase measurement errors due to the linear phase shifter errors in static electro-optic holography, and phase measurement errors due to the errors in the vibrating bias amplitude and phase in dynamic electro-optic holography. Through the error analysis, we found that the phase shifting errors in static electro-optic holography are twice as large as those in the conventional 4-bucket phase shifting algorithm, and the phase shifting errors in dynamic electro-optic holography are similar to those in the 4-bucket phase shifting algorithm.     

Randomly displaced phase distribution design for computer-generated binary hologram with narrow recording spots

A random phase mask is often used for Fourier transform holography to improve its recording and reconstruction characteristics. However, a conventional random phase pattern has the disadvantage of expanding the recording spot, which is caused by the high-resolution phase modulation. Previously, we proposed a random phase pattern that makes the recording spot narrower than the conventional one with maintaining a moderate reconstruction quality. In the present study, we apply the proposed random phase pattern to computer-generated binary holograms and evaluate both the hologram distribution and reconstruction quality in terms of practical holographic memory systems. The results confirm the effectiveness of the random phase in the reconstruction for an elementary data pattern.     

Method for eliminating zero-order diffraction in lensless Fourier transform digital holography

A method to induce phase shifting in lensless Fourier of digital holography system is presented. In this method, by computer simulation and theoretical analysis on the technology to eliminate the influence of zero-order diffraction in force, it can be found that, a reference light induced in a random non-2π integral number of phase shifting shooting to get the second hologram, and wave reconstruction can be got by the difference value image of the two holograms. And, the method of different digital holography record system with different phase shifting should be used. In this paper, theoretical analyses have been done in detail to discuss the problems that exist in the unsuitable phase-shifting methods. Furthermore, some experiments have been done to prove the reliability of this method. This method can significantly improve the image quality and give better resolution of the reconstructed image.     

Quantitative phase contrast imaging using common-path in-line digital holography

We propose a method to carry out quantitative phase contrast imaging using in-line digital holography. The phase shifting digital holography is implemented in a common-path in-line configuration with the help of diffraction from a phase grating displayed on a spatial light modulator. The phase shifted interferograms are recorded by shifting the grating within a selected area corresponding to the dc spot in the Fourier transform plane. The feasibility of method is verified by using a multimode fiber as phase object. The method addresses a number of challenges faced by existing methods and dispenses the need for special optics.     

Laser confocal microscope with wavelet-profiled point spread function

We report a laser-scanning confocal reflectance microscope with a wavelet-profiled point spread function (PSF) for rapid multi-resolution extraction and analysis of microscopic object features. The PSF is generated via holography by encoding a π-phase shifting disk unto a collimated laser beam via a phase-only spatial light modulator (SLM) that is positioned at the pupil plane of the focusing objective lens. Scaling of the transverse PSF distribution is achieved by selecting a suitable ratio of the π-phase shifting disk radius and the pupil aperture radius. With one and the same objective lens and one SLM to control the phase profile of the pupil function, we produce amplitude PSF distributions that are accurate scaled representations of the circularly-symmetric Mexican hat mother wavelet.     

A method of hard X‐ray phase‐shifting digital holography

A new method of phase‐shifting digital holography is demonstrated in the hard X‐ray region. An in‐line‐type phase‐shifting holography setup was installed in a 6.80 keV hard X‐ray synchrotron beamline. By placing a phase plate consisting of a hole and a band at the focusing point of a Fresnel lens, the relative phase of the reference and objective beams could be successfully shifted for use with a three‐step phase‐shift algorithm. The system was verified by measuring the shape of a gold test pattern and a silica sphere.     

Solution to the twin image problem in holography

While holography truly constitutes an ingenious concept, ever since its invention by Gabor it has been troubled by the so-called twin-image problem limiting the information that can be obtained from a holographic record. For symmetry reasons there are always two images appearing in the reconstruction of a hologram and the unwanted out of focus twin-image obscures the object. Here we show a universal method of reconstructing a hologram completely free of twin-image disturbances while no assumptions about absorbing or phase shifting properties of the object need to be imposed. Thus, truthful amplitude and phase distributions are retrieved.