Polyrotaxane‐Mediated Self‐Assembly of Gold Nanospheres into Fully Reversible Supercrystals

The use of a thiol‐functionalized nonionic surfactant to stabilize spherical gold nanoparticles in water induces the spontaneous formation of polyrotaxanes at the nanoparticle surface in the presence of the macrocycle α‐cyclodextrin. Whereas using an excess of surfactant an amorphous gold nanocomposite is obtained, under controlled drying conditions the self‐assembly between the surface supramolecules provides large and homogenous supercrystals with hexagonal close packing of nanoparticles. Once formed, the self‐assembled supercrystals can be fully redispersed in water. The reversibility of the crystallization process may offer an excellent reusable material to prepare gold nanoparticle inks and optical sensors with the potential to be recovered after use.     

Bioactive Seed Layer for Surface‐Confined Self‐Assembly of Peptides

The design and control of molecular systems that self‐assemble spontaneously and exclusively at or near an interface represents a real scientific challenge. We present here a new concept, an active seed layer that allows to overcome this challenge. It is based on enzyme‐assisted self‐assembly. An enzyme, alkaline phosphatase, which transforms an original peptide, Fmoc‐FFY(PO₄^2?), into an efficient gelation agent by dephosphorylation, is embedded in a polyelectrolyte multilayer and constitutes the “reaction motor”. A seed layer composed of a polyelectrolyte covalently modified by anchoring hydrogelator peptides constitutes the top of the multilayer. This layer is the nucleation site for the Fmoc‐FFY peptide self‐assembly. When such a film is brought in contact with a Fmoc‐FFY(PO₄^2?) solution, a nanofiber network starts to form almost instantaneously which extents up to several micrometers into the solution after several hours. We demonstrate that the active seed layer allows convenient control over the self‐assembly kinetics and the geometric features of the fiber network simply by changing its peptide density.     

Amphiphilic Janus Gold Nanoparticles Prepared by Interface‐Directed Self‐Assembly: Synthesis and Self‐Assembly

Materials with Janus structures are attractive for wide applications in materials science. Although extensive efforts in the synthesis of Janus particles have been reported, the synthesis of sub‐10 nm Janus nanoparticles is still challenging. Herein, the synthesis of Janus gold nanoparticles (AuNPs) based on interface‐directed self‐assembly is reported. Polystyrene (PS) colloidal particles with AuNPs on the surface were prepared by interface‐directed self‐assembly, and the colloidal particles were used as templates for the synthesis of Janus AuNPs. To prepare colloidal particles, thiol‐terminated polystyrene (PS‐SH) was dissolved in toluene and citrate‐stabilized AuNPs were dispersed in aqueous solution. Upon mixing the two solutions, PS‐SH chains were grafted to the surface of AuNPs and amphiphilic AuNPs were formed at the liquid–liquid interface. PS colloidal particles decorated with AuNPs on the surfaces were prepared by adding the emulsion to excess methanol. On the surface, AuNPs were partially embedded in the colloidal particles. The outer regions of the AuNPs were exposed to the solution and were functionalized through the grafting of atom‐transfer radical polymerization (ATRP) initiator. Poly[2‐(dimethamino)ethyl methacrylate] (PDMAEMA) on AuNPs were prepared by surface‐initiated ATRP. After centrifugation and dissolving the colloidal particles in tetrahydrofuran (THF), Janus AuNPs with PS and PDMAEMA on two hemispheres were obtained. In acidic pH, Janus AuNPs are amphiphilic and are able to emulsify oil droplets in water; in basic pH, the Janus AuNPs are hydrophobic. In mixtures of THF/methanol at a volume ratio of 1:5, the Janus AuNPs self‐assemble into bilayer structures with collapsed PS in the interiors and solvated PDMAEMA at the exteriors of the structures.     

Preparation of an Organometallic Molecular Square by Self‐Assembly of Phosphorus‐Containing Building Blocks

Molecular squares are among the most common supramolecular architectures, but phospha‐organometallic complexes have not been used as building blocks for this type of structure. Herein we describe the formation of the molecular square [Au{Co(P₂C₂tBu₂)₂}]₄ ( 1 ) by the self‐assembly of anionic 1,3‐diphosphacyclobutadiene cobalt complexes and gold(I) cations. The X‐ray crystallographic determination of the molecular structure of 1 is complemented by solid‐state ³¹P and ¹³C NMR investigations. High‐level DFT calculations confirm the assignment of the ³¹P and ¹³C NMR resonances.     

Boronic Acids in Molecular Self‐Assembly

The reversibility of boronic acid and diol interaction makes it an ideal candidate for the design of self‐assembled molecular structures. Reversibility is required to ensure that the thermodynamically most stable structure is formed. Reversibility also ensures that any errors produced during the assembly process are not permanent.     

Precise Molecular Fission and Fusion: Quantitative Self‐Assembly and Chemistry of a Metallo‐Cuboctahedron

Inspiration for molecular design and construction can be derived from mathematically based structures. In the quest for new materials, the adaptation of new building blocks can lead to unexpected results. Towards these ends, the quantitative single‐step self‐assembly of a shape‐persistent, Archimedean‐based building block, which generates the largest molecular sphere (a cuboctahedron) that has been unequivocally characterized by synchrotron X‐ray analysis, is described. The unique properties of this new construct give rise to a dilution‐based transformation into two identical spheres (octahedra) each possessing one half of the molecular weight of the parent structure; concentration of this octahedron reconstitutes the original cuboctahedron. These chemical phenomena are reminiscent of biological fission and fusion processes. The large 6 nm cage structure was further analyzed by 1D and 2D NMR spectroscopy, mass spectrometry, and collision cross‐section analysis. New routes to molecular encapsulation can be envisioned.     

Water‐Soluble Molecular Capsules: Self‐Assembly and Binding Properties

The self‐assembly and characterization of water‐soluble calix[4]arene‐based molecular capsules ( 1?2 ) is reported. The assemblies are the result of ionic interactions between negatively charged calix[4]arenes 1 a and 1 b , functionalized at the upper rim with amino acid moieties, and a positively charged tetraamidiniumcalix[4]arene 2 . The formation of the molecular capsules is studied by ¹H NMR spectroscopy, ESI mass spectrometry (ESI‐MS), and isothermal titration calorimetry (ITC). A molecular docking protocol was used to identify potential guest molecules for the self‐assembled capsule 1 a?2 . Experimental guest encapsulation studies indicate that capsule 1 a?2 is an effective host for both charged (N‐methylquinuclidinium cation) and neutral molecules (6‐amino‐2‐methylquinoline) in water.     

When Molecular Probes Meet Self‐Assembly: An Enhanced Quenching Effect

We demonstrate that the incorporation of one or two amino acids of phenylalanine (F) or 4‐fluoro phenylalanine (^fF) will greatly lower the background fluorescence intensities of conventional quenched probes with quenchers. This enhanced quenching effect was due to the synergetic effect of the aggregation caused quenching and the presence of a quencher. Such strategy will not greatly affect the enzyme recognition properties to the probes. We also demonstrated that our self‐assembled nanoprobe with the enhanced quenching effect showed a better performance in cells for the detection of cell apoptosis than the unassembled probes. Our study demonstrates that using molecular self‐assembly can optimize and improve the performance of molecular probes and it provides a simple but very useful strategy to boost the signal‐to‐noise ratios of fluorescence probes.     

Thermally Reversible Self‐Assembly of Nanoparticles via Polymer Crystallization

The directed self‐assembly of gold nanoparticles through the crystallization of surface‐grafted polyethylene oxide (PEO) in ethanol–water mixtures is described. This process is fully reversible and tunable through either the size of the core or the polymeric coating. Characterization by X‐ray scattering and electron microscopy of the self‐assembled structures reveals order at the nanoscale, typically not the case for thermoresponsive gold nanoparticles coated with lower or upper critical solution temperature polymers. A further novelty is the result of selective binding of calcium ions to the PEO in the fluid state: a reversible thermoresponsive transition become irreversible.

     

Self‐Assembly of a Au16 Ring via Metal–Metal Bonding Interactions

Metal–metal bonding interactions have been employed as an efficient strategy to generate a number of unique gold(I) metallo‐macrocycles with fascinating functions. The self‐assembly, crystal structure and emission property of novel nest‐like tetramer 1₄ , namely, {[Au₄(μ‐dppm)₂(μ‐dctp^2?)](BF₄)₂}₄ ? (CH₃CN)₂ (dppm=bis(diphenylphosphino)methane, dctp^2?=N,N′‐bis(dicarbodithioate)‐2,11‐diaza[3.3]paracyclophane) is reported. The complex has been characterized by single‐crystal X‐ray diffraction analysis, ¹H NMR spectroscopy, ¹³C NMR spectroscopy, and CSI‐MS spectrometry. The aggregate demonstrates the sixteen gold(I) atoms are arranged in a ring with a circumference of 50.011(68) Å generated by Au^I???Au^I attractions. UV/visible and luminescence spectroscopy revealed that this Au^I???Au^I bonded metallo‐macrocycle exhibited yellow phosphorescence.     

pH‐Responsive Self‐Assembly by Molecular Recognition on a Macroscopic Scale

Macroscopic pH‐responsive self‐assembly is successfully constructed by polyacrylamide(pAAm)‐based gels carrying dansyl (Dns) and β‐cyclodextrin (βCD) residues, which are represented as Dns‐gel and βCD‐gel, respectively. Dns‐gel and βCD‐gel assemble together at pH ≥ 4.0, but disassemble at pH ≤ 3.0. The adhesion strengths for pairs of Dns‐gel/βCD‐gel increase with increasing pH. The fluorescence study on the model system of pAAm modified with 1 mol% Dns moieties (pAAm/Dns) reveals that Dns residues are protonated at a lower pH, which results in the reduction in binding constant (K) for Dns residues and βCD.

     

Surfactant‐Free Self‐Assembly of Nanocrystals into Ellipsoidal Architectures

A simple approach to control the self‐assembly of ZnS nanocrystals into well‐defined, uniform, three‐dimensional, micrometer‐scale, solid ellipsoidal structures with rattle‐type, multishelled, and hollow architectures is presented. There is no surfactant or small molecule to assist the self‐assembly of the nanocrystals. A possible mechanism of the controlled self‐assembly is proposed. The growth process can be divided into two stages: 1) the formation of ellipsoidal architectures via oriented aggregation, the growth kinetics of which is primarily attributed to the charge–charge, charge–dipole, and dipole–dipole interactions of preformed ZnS nanocrystals; and 2) Ostwald ripening, which results in multishelled, rattle‐type, and hollow structures. This self‐assembly concept is also applicable to other metal sulfides.