Pd(0)‐ S‐propyl‐2‐aminobenzothioate immobilized onto functionalized magnetic nanoporous MCM‐41 as efficient and recyclable nanocatalyst for the Suzuki,Stille and Heck cross coupling reactions

The present work describes the use of Pd(0)‐ S‐propyl‐2‐aminobenzothioate Complex immobilized onto functionalized magnetic nanoporous MCM‐41(Fe₃O₄@MCM‐41@Pd‐SPATB) as efficient and recyclable nano‐organometallic catalyst for C–C bond formation between various aryl halides with phenylboronic acid (Suzuki reaction), aryl halides with triphenyltin chloride (Stille reaction), and aryl halides with n‐butyl acrylate (Heck reaction). All the reactions were carried out in PEG‐400 as green solvent with short reaction time and good to excellent yields. This catalyst was characterized by FT‐IR spectroscopy, XRD, TGA, VSM, ICP‐OES, TEM, EDX and SEM techniques. Ease of operation, high efficiency, recovery and reusability for five continuous cycles without significant loss of its catalytic activities or metal leaching are the noteworthy features of the currently employed heterogeneous catalytic system.     

Cationic ruthenium(II) complexes supported on mesoporous silica as catalyst precursors in the selective oxidative cleavage of 1‐octene

The selective oxidative cleavage of 1‐octene to heptanal and heptanoic acid is reported. A range of model and silica‐immobilized ruthenium(II) systems were evaluated. The MCM‐41 and SBA‐15 immobilized systems were found to show superior activity when compared to their homogeneous counterparts and were found to exert control over the selective formation of aldehydes or carboxylic acids. This could be achieved by varying the reaction times with very high yields being achieved at relatively short reaction times and low metal concentrations. The immobilized catalysts were characterized using nitrogen sorption, powder X‐ray diffraction, transmission and scanning electron microscopies, solid‐state NMR spectroscopy and thermogravimetric analysis.     

Fast photoreduction of a heme peptide encapsulated in nanostructured materials

Microperoxidase-11 has been immobilized on siliceous materials MCM-41 and SBA-15 and on amino-functionalized SBA-15. Resonance Raman spectroscopy has provided solid evidence that the exogenous species occupy the pores of the mesoporous silica materials. Photoreduction of the microperoxidase-11 Fe(III) center has been observed to occur in the immobilized samples and results in a long-lived stable reduced heme. Reoxidation of the heme occurs upon addition of oxygen, and the redox cycle can be repeated numerous times. The source of the electron resulting in reduction of the heme is proposed to originate from the silica matrix, and functionalization of silica surface is suggested to facilitate electron transfer to the heme.     

固载于 Al-MCM-41 纳米孔道中的钒离子催化氧化烷基芳基硫化物

 VOSO₄ immobilized within nanoreactors of Al-MCM-41 (VO²⁺/Al-MCM-41) was synthesized and characterized by X-ray diffraction, Fourier transform infrared spectroscopy, nitrogen adsorption-desorption, and chemical analysis techniques. The prepared VO²⁺/Al-MCM-41 successfully catalyzes the oxidation of aryl alkyl sulfides and up to 99% conversion and 90% selectivity for the corresponding sulfoxides were obtained with H₂O₂ as oxidant in acetonitrile at room temperature in 30 min.     

氨功能化介孔MCM-41固载锰卟啉作为萘羟基化多相催化剂

将不同含量的四(五氟苯基)卟啉锰固载于表面氨基功能化的MCM-41介孔分子筛,所得样品通过粉末X射线衍射、氮气吸附脱附、傅里叶变换红外光谱、X射线光电子能谱、扫描电子显微镜、漫反射紫外-可见光谱、热重和差示扫描量热、电感耦合等离子体进行了表征.结果表明,四(五氟苯基)卟啉锰通过Mn与氨基的轴向配位固载于MCM-41.所制备的样品作为多相催化剂在以间氯过氧苯甲酸为氧化剂选择氧化萘反应中表现出良好的催化性能,且多次使用后没有明显的活性损失.     

The effects of solution structure on the surface conformation and orientation of a cysteine-terminated antimicrobial peptide cecropin P1

The surface structure of an antimicrobial peptide, cecropin P1, immobilized to a gold surface via a terminal cysteine residue was investigated. Using reflection-absorption infrared spectroscopy, surface plasmon resonance, and X-ray photoelectron spectroscopy, the effects of pH, solution conformation, and concentration on the immobilized peptide conformation, average orientation, and surface density were determined. Under all conditions investigated, the immobilized peptides were α-helical in a predominately flat, random orientation. The addition of the reducing agent Tris(2-carboxyethyl) phosphine hydrochloride to the buffer resulted in a twofold increase in immobilized peptide surface density.     

Exploring the distribution of copper-Schiff base complex covalently anchored onto the surface of mesoporous MCM 41 silica

A series of copper-Schiff base MCM 41 materials, synthesized by post-synthetic grafting, was studied by X-ray photoelectron spectroscopy (XPS) and nitrogen sorption (77 K) to explore distribution of the copper-Schiff base complex immobilized on the porous Si-MCM 41. Additional information on the physico-chemical properties of the functionalized materials was obtained by powder X-ray diffraction (XRD), atomic absorption spectroscopy (AAS), CHN microanalysis, FTIR spectroscopy, ²⁹Si and ¹³C CP MAS NMR spectroscopy. The effect of copper-Schiff base complex loading and reaction times on the surface properties of Si-MCM 41 (surface area and pore parameters) in addition to its distribution within the Si-MCM 41 was explored by nitrogen sorption and XPS coupled with argon etching. Argon etching of a surface to a depth of 45 Å confirmed that the copper-Schiff base complex was distributed both on the external surface (pore end) and within the pores of Si-MCM 41. The amount of complex located in the pores at this depth was about one-third of the amount detected on the external surface of MCM 41. Nitrogen sorption isotherms measured at 77 K confirmed the reduction in total pore volume and surface area was the result of pore narrowing of Si-MCM 41 following grafting of complex in the 8 h samples. A significant decrease in surface area and pore volume for the 20 h sample (longer reaction time), with the highest copper loading (0.65 mmol g⁻¹), confirmed pore blocking in this material. The uneven distribution of the copper complex between the external and internal surface of Si-MCM 41 was attributed to the bulky nature of the complex, which restricted access to the pores.     

Porphyrins incorporated to SiO<Subscript>2</Subscript> gels as fluorescent materials and efficient catalysts in biomimetic photocatalytic systems

Two types of porphyrins (water-soluble and water-insoluble) were encapsulated in transparent monolithic silica gels. Their properties in solutions and at various steps of the sol–gel process were studied by absorption and emission electron spectroscopy. A photocatalytic system containing porphyrins immobilized in powdered silica gel for α-pinene biomimetic oxidation to pinocarveol, pinocarvone and myrtenol is reported. The impact of several parameters (visible light irradiation time, organic solvent, the presence of an electron acceptor/donor, and substrate concentration) on this biotransformation process was investigated and optimized. It was established that photochemical excitation of sol–gel immobilized metal-free porphyrins is crucial for catalyzed oxidation of monoterpenes.     

Dual‐enzyme,co‐immobilized capillary microreactor combined with substrate recycling for high‐sensitive glutamate determination based on CE

A new method for high‐sensitive determination of glutamate was developed and evaluated based on CE by using dual‐enzyme co‐immobilized capillary microreactor combined with substrate recycling. The capillary microreactor was prepared by covalently co‐immobilizing glutamate dehydrogenase (GDH) and glutamic pyruvic transaminase (GPT) on the inner surface of a capillary and was characterized by SEM, ultraviolet‐visible spectroscopy, and fluorescence spectroscopy. The GDH‐GPT co‐immobilized capillary microreactor showed great stability and reproducibility. The apparent K_m for glutamate with GDH‐GPT coupled reaction was determined to be 0.61±0.06 mM but 2.56±0.24 mM when only GDH was immobilized. Glutamate determination was based on on‐column monitoring UV absorption at 340 nm of the reaction product reduced nicotinamide adenine dinucleotide, of which peak area was directly related to the glutamate concentration. The response of the present co‐immobilized GDH‐GPT assay for glutamate is greatly enhanced over single enzyme system, and a 15.7‐fold improvement in sensitivity was obtained. The detection limit of the proposed method is 0.15 μM glutamate (S/N=3). Selectivity for glutamate is good over most of the 20 amino acids. Finally, this method was successfully applied to determine the glutamate content in rat plasma and serum samples.     

Chloro-Modified Magnetic Fe3O4@MCM-41 Core–Shell Nanoparticles for L-Asparaginase Immobilization with Improved Catalytic Activity,Reusability, and Storage Stability

This paper describes a new support that permits to efficient immobilization of L-asparaginase (L-ASNase). For this purpose, Fe₃O₄ magnetic nanoparticles were synthesized and coated by MCM-41. 3-chloropropyltrimethoxysilane (CPTMS) was used as a surface modifying agent for covalent immobilization of L-ASNase on the magnetic nanoparticles. The chemical structure; thermal, morphological, and magnetic properties; chemical composition; and zeta potential value of Fe₃O₄@MCM-41-Cl were characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential thermal analysis (DTA), differential scanning calorimetry (DSC), vibrating sample magnetometer (VSM), scanning electron microscope (SEM), energy dispersive X-ray (EDX), X-ray diffraction patterns (XRD), and zeta-potential measurement. The immobilization efficiency onto Fe₃O₄@MCM-41-Cl was detected as 63%. The reusability, storage, pH, and thermal stabilities of the immobilized L-ASNase were investigated and compared to that of soluble one. The immobilized enzyme maintained 42.2% of its original activity after 18 cycles of reuse. Furthermore, it was more stable towards pH and temperature compared with soluble enzyme. The Michaelis–Menten kinetic properties of immobilized L-ASNase showed a lower V_max and a similar K_m compared to soluble L-ASNase. Immobilized enzyme had around 47 and 32.5% residual activity upon storage a period of 28 days at 4 and 25 °C, respectively. In conclusion, the Fe₃O₄@MCM-41-Cl@L-ASNase core–shell nanoparticles could successfully be used in industrial and medical applications.

     

Nano NiO/AlMCM‐41, a green synergistic,highly efficient and recyclable catalyst for the reduction of nitrophenols

Highly ordered mesoporous molecular sieves AlMCM‐41 and a new NiO/AlMCM‐41 nanocomposite were synthesized using a sol–gel method. Fourier transform infrared (FT‐IR) spectroscopy, X‐ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive X‐ray spectroscopy (EDX), and N₂ adsorption desorption analyses were used to examine the structure, morphology, size and phase composition of the synthesized NiO/AlMCM‐41 nanocomposites. AlMCM‐41 embedded with NiO nanoparticles was subsequently prepared using different nickel loadings in a direct synthetic route. The results show the successful deposition of NiO nanoparticles onto the framework of AlMCM‐41. AlMCM‐41 provides enormous benefits such as environmentally safe, economic viability and porosity when used as support for NiO nanoparticles. The excellent catalytic activities of AlMCM‐41 and NiO/AlMCM‐41 were investigated for the reduction of nitrophenols (4‐NP, 2‐NP) to aminophenols (4‐AP, 2‐AP) in water at ambient temperature. The best observed performance of reduction of NP with 100% conversion into analogous amino derivatives occurred within 6 min with an estimated rate constant of 0.46 min^?1. The efficiency of reduction was observed to increase as a function of NiO enrichment. The NiO/AlMCM‐41 nanocomposite could be recycled and reused up to five times without noticeable change in its structure and activity. These properties make NiO/AlMCM‐41 nanocomposite an ideal platform to study various heterogeneous catalytic processes which can have application in purification, catalysis, sensing devices, and green chemistry.     

介孔分子筛MCM-41固载多氮杂环席夫碱与偏钒酸钠共催化氧化苯一步制备苯酚

2-苯基-1,2,3-三唑醛和喹喔啉醛通过亚胺键固载到介孔分子筛MCM-41上,得到6种MCM-41固载多氮杂环席夫碱(L1~L6),用FT-IR、XRD和SEM等技术手段对所制得的固载席夫碱进行表征。 研究了以MCM-41固载多氮杂环席夫碱和金属盐偏钒酸钠为共同催化剂,过氧化氢为氧源,直接催化氧化苯合成苯酚,用气相色谱快速检测苯酚产率。 系统地考察了配体、金属盐、温度、溶剂、催化剂用量、反应时间、氧化剂等因素对反应的影响,产率最佳可达23.9%,选择性大于90%。 对催化剂扩大5倍量进行试验,得到23%的产率和93%的选择性,并且催化剂重复使用3次仍能达到19%的产率和90%以上的选择性。     

Heck and oxidative boron Heck reactions employing Pd(II) supported amphiphilized polyethyleneimine‐functionalized MCM‐41 (MCM‐41@aPEI‐Pd) as an efficient and recyclable nanocatalyst

A novel nanocatalyst was developed based on covalent surface functionalization of MCM‐41 with polyethyleneimine (PEI) using [3‐(2,3‐Epoxypropoxy)propyl] trimethoxysilane (EPO) as a cross‐linker. Amine functional groups on the surface of MCM‐41 were then conjugated with iodododecane to render an amphiphilic property to the catalyst. Palladium (II) was finally immobilized onto the MCM‐41@PEI‐dodecane and the resulted MCM‐41@aPEI‐Pd nanocatalyst was characterized by FT‐IR, TEM, ICP‐AES and XPS. Our designed nanocatalyst with a distinguished core‐shell structure and Pd²⁺ ions as catalytic centers was explored as an efficient and recyclable catalyst for Heck and oxidative boron Heck coupling reactions. In Heck coupling reaction, the catalytic activity of MCM‐41@aPEI‐Pd in the presence of triethylamine as base led to very high yields and selectivity. Meanwhile, the MCM‐41@aPEI‐Pd as the first semi‐heterogeneous palladium catalyst was examined in the C‐4 regioselective arylation of coumarin via the direct C‐H activation and the moderate to excellent yields were obtained toward different functional groups. Leaching test indicated the high stability of palladium on the surface of MCM‐41@aPEI‐Pd as it could be recycled for several runs without significant loss of its catalytic activity.     

Modified MCM-41 as a drug delivery system for acetylsalicylic acid

The modification of prepared MCM-41 by different groups (amino, chloro and oxo) was studied. Prepared materials were treated by acetylsalicylic acid and hybrid materials were characterized, compared from the point of view of immobilized amount of active substance. The highest amount of acetylsalicylic acid was detected using methyl-tert- butyl ether as a solvent and MCM-41 without modification after 1 h (0.35 g per 1 g of the support) or MCM modified by amino group after 5 h (0.37 g per 1 g of the support) as a support. Using amino modified MCM, the longer treatment by acetylsalicylic acid converged to the equilibrium and after 24 h the immobilized amount was 0.3 g per 1 g. A dissolution in vitro study was carried out, comparing the stability of formed interactions. The slowest dissolution was detected using non-modified MCM-41 and oxo modified material.     

一步法制备PNIPAAm-g-PAN/PSt载银复合微球及其抗菌性能研究

以AgNO3为金属源,通过乙醇将与聚N-异丙基丙烯酰胺接枝聚丙烯腈/聚苯乙烯（PNIPAAm-g-PAN/PSt）聚合物微球表面酰胺基团配位的银离子（Ag+）还原,一步法制备了PNIPAAm-g-PAN/PSt载银复合微球。通过傅立叶变换红外（FTIR）和紫外-可见光光谱表征发现,由Ag+还原所得的Ag纳米颗粒被成功地固载在PNIPAAm-g-PAN/PSt 微球上;用透射电子显微镜（TEM）对载银微球的大小和形态进行了表征;热重分析（TGA）结果表明,固载在微球表面的银纳米颗粒的含量（质量分数）为12%;抗菌实验结果表明,所制备的载银微球具有抗革兰氏阴性菌的活性。     

Ni-guanidine@MCM-41 NPs: a new catalyst for the synthesis of 4,4ʹ-(arylmethylene)-bis-(3-methyl-1-phenyl-1H-pyrazol-5-ols) and symmetric di-aryl sulfides

In this work, the surface of mesoporous MCM-41 was modified with guanidine, and then, Nickel particles have become immobilized on its surface (Ni-guanidine@MCM-41NPs). This heterogeneous catalyst has been identified by various techniques including: low-angle X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, inductively coupled plasma, thermal gravimetric analysis and N₂ adsorption–desorption measurement isotherms, and its catalytic application was studied in the synthesis of 4,4ʹ-(arylmethylene)-bis-(3-methyl-1-phenyl-1H-pyrazol-5-ol) derivatives and symmetric di-aryl sulfides. The prepared organometallic complex could be isolated, post-reaction, by simple filtration for several consecutive cycles without a notable change in its catalytic activity.

     

Fe3O4‐supported Schiff‐base copper (II) complex: A valuable heterogeneous nanocatalyst for one‐pot synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives

A novel Cu (II) Schiff‐base complex immobilized on core‐shell magnetic Fe₃O₄ nanoparticles (Fe₃O₄@SPNC) was successfully designed and synthesized. The structural features of these nanoparticles were studied and confirmed by using various techniques including FT‐IR spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDS), vibrating sample magnetometer (VSM), X‐Ray diffraction (XRD), wavelength dispersive X‐ray spectroscopy (WDX), and inductively coupled plasma (ICP). These newly synthesized nanoparticles have been used as efficient heterogeneous catalytic system for one‐pot multicomponent synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives. Notably, the catalyst could be easily separated from the reaction mixture by using an external magnet and reused for several successive reaction runs with no significant loss of activity or copper leaching. The present protocol benefits from a hitherto unreported MNPs‐immobilized Cu (II) Schiff‐base complex as an efficient nanocatalyst for the synthesis of newly reported derivatives of pyrano[2,3‐b]pyridine‐3‐carboxamide from one‐pot multicomponent reactions.     

Immobilization of Ru(terpyridine)(2,6‐pyridinedicarboxylate) onto MCM‐41 and its catalysis in the oxidation of alcohols

The ruthenium complex Ru(terpyridine)(2,6‐pyridinedicarboxylate) was successfully grafted onto MCM‐41 using a multi‐step grafting method. The immobilized ruthenium complex was characterized thoroughly using Fourier transform infrared, Raman, UV–visible diffuse reflectance and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, N₂ adsorption, scanning electron microscopy, thermogravimetric analysis and inductively coupled plasma analysis. This immobilized ruthenium complex showed excellent performance in the oxidation of various secondary alcohols to their corresponding ketones with tert‐butyl hydroperoxide as oxidant under solvent‐free conditions, and had the advantages of easy recovery and good reusability. Copyright © 2016 John Wiley & Sons, Ltd.     

Degradation and adsorption of rhodamine B and phenol on TiO<Subscript>2</Subscript>/MCM-41

TiO₂/MCM-41 composites with various titania content were prepared by loading titania into the mesopores of MCM-41 molecular sieves by sol-gel method, and were used as photocatalysts to degrade Rhodamine B (RhB) and phenol. The efficiency of organic contaminants removal was increased significantly compared with pure TiO₂. Ti/Si ratio, namely, the content of TiO₂ was determined by ICP-AES method. TiO₂/MCM-41 composites were characterized by X-ray diffraction, UV-Vis absorption spectroscopy and N₂ adsorption techniques. Experimental results demonstrated that most of the RhB was adsorbed instead of being degradated by TiO₂/MCM-41 due to the large specific surface area of MCM-41, while most of phenol was degradated. It turned out that the TiO₂/MCM-41 with the highest Ti/Si ratio of 0.8220 (wt) had the highest catalytic activity.     

Immobilization and direct electrochemistry of cytochrome <Emphasis Type="BoldItalic">c</Emphasis> at a single-walled carbon nanotube-modified electrode

A single-walled carbon nanotube (SWNT)-modified electrode was fabricated and characterized by SEM and ac impedance techniques. The direct electrochemistry of cytochrome c (Cyt c), which was adsorbed on the surface of the SWNT, was studied by cyclic voltammetry. The results from cyclic voltammetry and infrared spectroscopy indicated that Cyt c remained in its original structure and did not undergo structural change after its immobilization on the SWNT. Further results demonstrated that the SWNT had promotional effects on the direct electron transfer of Cyt c and also indicated that the immobilized Cyt c retained its electrocatalytic activity to the reduction of H₂O₂. This modified electrode might be used in development of new biosensors and the biofuel cells.