Organo tin nucleophiles IV. Palladium catalyzed conjugate reduction with tin hydride

Highly chemoselective conjugate reduction of α,β-unsaturated carbonyl compounds is now possible by using tributyl tin hydride with Pd(PØ₃)₄; an optimization study puts forth the importance of added radical scavenger and proton source in these reductions.     

A systematic study of the hydride reduction of cyclopropyl ketones with structurally simplified substrates. highly stereoselective reductions of trans-substituted cyclopropyl ketones via the bisected s-cis conformation

The stereoselective hydride reduction of the cis- and trans-substituted cyclopropyl ketones was systematically investigated using a series of structurally simplified substrates, trans-[tert-butyldiphenylsilyloxymethyl]cyclopropyl ketones 1a-e and trans-(benzyloxymethyl)cyclopropyl methyl ketone (2), and the corresponding cis congeners 3a,b,e and 4. The results showed that, not only in the reduction of the cis-substituted cyclopropyl ketones but also in that of the trans-substituted ketones, high stereoselectivity can be realized when the substrate has a bulky substituent on the cyclopropane ring, even though it is attached to the position trans to the acyl moiety. Ab initio calculations based on the density functional theory (DFT) of cyclopropyl ketones showed that (1) the bisected s-cis and s-trans conformers were the only two minimum energy conformers, while the s-cis conformer was more stable than the s-trans and (2) a bulky alkyl group in the acyl moiety and a cis substituent on the cyclopropane ring made the bisected s-cis conformer much more stable. On the basis of these calculations and experimental results, it is likely that the more stable the bisected s-cis conformer of the substrate, the more stereoselective the hydride reduction. Thus, the stereochemistry can be explained by hydride attack on the bisected s-cis conformation of the substrate from the less-hindered face. The predictability of the stereochemical results is predicated on the bisected s-cis transition-state model, which is very important from the viewpoint of synthetic organic chemistry.     

Addition of aryl radicals generated from electrochemical reduction of aryl halides on carbon-carbon double bonds.

Aryl radicals generated by electrochemical reduction of aryl halides in aprotic medium react with styrene and its derivatives to give arylated addition compounds.     

Synthesis and structure of anthramycin analogs via hydride reduction of dilactams

Hydride reduction of pyrrolo[1,4]benzodiazepine-5,10-diones to carbinolamines is possible if a sufficiently electron-withdrawing group is present on the aromatic ring; the X-ray structure of one such product is given.     

Organo tin nucleophiles iii. Palladium catalyzed reductive cleavage of allylic heterosubstituents with tin hydride

Tributyl tin hydride, serving as an efficient hydride transfer agent, allows highly chemoselective palladium catalyzed reductions of allylic heterosubstituents even in presence of aldehydes, benzyl acetate and benzyl chloride.     

Polyaryl anion radicals via alkali metal reduction of arylurea oligomers

A series of N-methylated polyarylurea oligomers have been reduced with potassium metal in HMPA. These reductions result in the transient formation of arylurea anion radicals, which undergo reductive elimination of the urea linkages. The aryl moieties appear in the products as the anion radicals of oligoaryl systems. The reaction is intramolecular, and the sequencing in the polyaryl anion radical remains the same as in the polyarylureas due to the urea-enforced pi-pi stacking interactions.     

Effects of polymer structure on reactivity of functional groups in reduction reaction using tin hydride soluble supports

The influence of macromolecular chains onto reactivity of the grafted functional group has been investigated through reduction of 6‐bromohexene using tin hydride soluble polymer supports. Kinetic investigations clearly indicate a retarding effect of the polymer structure on the substrate diffusion. Correlations of molecular weight and degree of functionalization with reactivity of the functional lateral groups are discussed. In dilute regime, an increasing of internal density of the polymer coil leads to a diminution of the rate constant k_H. Thus, the higher density of the coil limits the substrates diffusion, which favors the radical cyclization and so formation of the cyclic product. At the opposite, in concentrated regime formation of the acyclic product, hex‐1‐ene is favored despite the higher viscosity of such medium that should limit the diffusion. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5954–5964, 2006     

Surface modification of indium tin oxide via electrochemical reduction of aryldiazonium cations

The facile deposition of para-substituted aryl films onto indium-tin oxide (ITO) electrodes by the electrochemical reduction of aryl diazonium salts in acetonitrile is reported. For the deposition conditions used in this report, the aryl film thicknesses are on the order of 1-6 nm, suggesting a multilayer structure. Regardless of the functional group on the aryl diazonium cation, (NO(2), CO(2)H, or fluorene) the electrodeposition behavior onto ITO electrodes is similar to that seen on other electrode materials. XPS and UV-vis data support the introduction of organic functional surface groups to ITO. The blocking behavior of the aryl films on ITO toward the Ru(NH(3))(6)(3+/2+) redox couple is in agreement with electron transfer through conjugated organic layers. The facile preparation of patterned aryl films with regular-spaced 700 nm voids on ITO is also described. Atomic force microscopy and scanning surface potential microscopy on patterned NO(2) aryl films are used to assess the molecular structure and orientation. A 100 mV decrease in the contact potential over NO(2) aryl films relative to bare ITO suggests that the aryl films are loosely structured as deposited with the NO(2) groups oriented at a small angle away from the ITO surface.     

Photoreduction of carbonyl compounds by tributyl tin hydride

The photochemical reactions of cyclohexanone, acetone, l-naphthaldehyde, 2-naphthaldehyde, and 2-acetonaphthone with tributyltin hydride are chain processes leading to the tributyltin ethers of the derived alcohols as the major products, and the analogous ethers of the corresponding pinacols as the most abundant minor products, rather than simple reductions to the alcohols themselves as previously reported. Chain termination for the reductions of those compounds that have a n,π^* triplet state occurs primarily by coupling of tributyltin radicals to form hexabutyiditin, but by coupling of the ketyl radicals to form pinacol ethers for those compounds that have a π,π^* triplet state. Ring reduction is an important process for the aromatic compounds with π, π^* triplet states that were studied. Analyses were performed using 1H, 13C and 119 Sn NMR.     

Persistent radicals of trivalent tin and lead

In this report we present synthetic, crystallographic, and new electron paramagnetic resonance (EPR) spectroscopic work that shows that the synthetic route leading to the recently reported, first persistent plumbyl radical *PbEbt3 (Ebt = ethylbis(trimethylsilyl)silyl), that is, the oxidation of the related PbEbt3-anion, was easily extended to the synthesis of other persistent molecular mononuclear radicals of lead and tin. At first, various novel solvates of homoleptic potassium metallates KSnHyp3 (4a), KPbHyp3 (3a), KSnEbt3 (4b), KPbIbt3 (3c), and KSnIbt3 (4c) (Hyp = tris(trimethylsilyl)silyl, Ibt = isopropylbis(trimethylsilyl)silyl), as well as some heteroleptic metallates, such as [Li(OEt2)2][Sn(n)BuHyp2] (3d), [Li(OEt2)2][Pb(n)BuHyp2] (4d), [Li(thf)4][PbPhHyp2] (3e), and [K(thf)7][PbHyp2{N(SiMe3)2}] (3f), were synthesized and crystallographically characterized. Through oxidation by tin(II) and lead(II) bis(trimethylsilyl)amides or the related 2,6-di-tert-butylphenoxides, they had been oxidized to yield in most cases the corresponding radicals. Five novel persistent homoleptically substituted radicals, that is, *SnHyp3 (2a), *PbHyp3 (1a), *SnEbt3 (2b), *SnIbt3 (2c), and *PbIbt3 (1c), had been characterized by EPR spectroscopy. The stannyl radicals 2a and 2c as well as the plumbyl radical 1c were isolated as intensely colored crystalline compounds and had been characterized by X-ray diffraction. Persistent heteroleptically substituted radicals such as *PbHyp2Ph (1e) or *PbHyp2Et (1g) had also been generated, and some selected EPR data are given for comparison. The plumbyl radicals *PbR3 exhibit a clean monomolecular decay leading to the release of a temperature-dependent stationary concentration of branched silyl radicals. They may thus serve as tunable sources of these reactive species that may be utilized as reagents for mild radical silylations and/or as initiators for radical polymerizations. We present EPR-spectroscopic investigations for the new tin- and lead-containing compounds giving detailed insights into their electronic and geometric structure in solution, as well as structural studies on the crystalline state of the radicals, some of their anionic precursors, and some side-products.     

Lewis acid-catalyzed formation of indene derivatives via tandem reactions of arylacetylenes with the cations generated from 2-silylmethyl cyclopropyl carbinols

Vicinal silylmethyl-substituted cyclopropyl carbinols undergo tandem intermolecular cation-arylacetylene cyclization to generate indene derivatives.