Control of the Fluorescence of DNA‐templated Silver Nanoclusters by Adenosine Triphosphate and Mercury(II)

Several DNA templates with the sequence 5′‐T _n TAACCCCTAACCCCT ‐3′ (n = 0, 15, 30, and 45) were used to prepare DNA template–silver nanoclusters (DNA –Ag NCs ). The T _n sequence acts as a recognition element for Hg²⁺, while the rest of the sequence acts as a template for DNA –Ag NCs . At pH 3.0, the fluorescence intensity of DNA –Ag NCs is enhanced by ATP , and the enhanced fluorescence is quenched by Hg²⁺. The length of polyT shows a slight effect on the sensitivity for the detection of Hg²⁺ but almost no effect on the optical properties of DNA –Ag NCs . The fluorescence response of DNA –Ag NCs (T₁₅‐DNA –Ag NCs ) vs. Hg²⁺ concentration shows two linear ranges over 10–100 and 100–1000 nM , mainly because of the fluorescence quenching due to DNA conformational changes through T–Hg²⁺–T coordination and the formation of an amalgam with Ag NCs , respectively. The sensitivity of the T₁₅‐DNA –Ag NC probe was validated through the analysis of Hg²⁺ in spiked pond water. Based on the switch‐on and switch‐off fluorescence properties of T₁₅‐DNA –Ag NCs , an IMPLICATION logic gate was fabricated using the concentrations of ATP and Hg²⁺ as inputs and the fluorescence intensity at 585 nm as output.     

Water-soluble homo-oligonucleotide stabilized fluorescent silver nanoclusters as fluorescent probes for mercury ion

Water–soluble fluorescent silver nanoclusters (Ag NCs) were prepared with the assistance of commercially available polyinosinic acid (PI) or polycytidylic acid (PC). The fluorescence of the Ag NCs is effectively quenched by trace mercury(II) ions, which can be applied for their detection. The response of the Ag NCs prepared with PI to Hg(II) ion is linear in the Hg(II) concentration range from 0.05 to 1.0 μM (R²?=?0.9873), and from 0.5 to 10 μM of Hg(II) (R²?=?0.9971) for Ag NCs prepared with PC. The detection limits are 3.0 nM and 9.0 nM (at an S/N of 3), respectively. The method is simple, sensitive and fairly selective.

Development of silver/gold nanocages onto indium tin oxide glass as a reagentless plasmonic mercury sensor

We demonstrate the utilization of silver/gold nanocages (Ag/Au NCs) deposited onto transparent indium tin oxide (ITO) film glass as the basis of a reagentless, simple and inexpensive mercury probe. The localized surface plasmon resonance (LSPR) peak wavelength was located at ∼800 nm. By utilizing the redox reaction between Hg²⁺ ions and Ag atoms that existed in Ag/Au NCs, the LSPR peak of Ag/Au NCs was blue-shifted. Thus, we develop an optical sensing probe for the detection of Hg²⁺ ions. The LSPR peak changes were lineally proportional to the concentration of Hg²⁺ ions over the range from 10 ppb to 0.5 ppm. The detection limit was ∼5 ppb. This plasmonic probe shows good selectivity and high sensitivity. The proposed optical probe is successfully applied to the sensing of Hg²⁺ in real samples.     

Cytidine-stabilized gold nanocluster as a fluorescence turn-on and turn-off probe for dual functional detection of Ag and Hg

In this study, we have developed a label-free, dual functional detection strategy for highly selective and sensitive determination of aqueous Ag⁺ and Hg²⁺ by using cytidine stabilized Au NCs and AuAg NCs as fluorescent turn-on and turn off probes, respectively. The Au NCs and AuAg NCs showed a remarkably rapid response and high selectivity for Ag⁺ and Hg²⁺ over other metal ions, and relevant detection limit of Ag⁺ and Hg²⁺ is ca. 10 nM and 30 nM, respectively. Importantly, the fluorescence enhanced Au NCs by doping Ag⁺ can be conveniently reusable for the detection of Hg²⁺ based on the corresponding fluorescence quenching. The sensing mechanism was based on the high-affinity metallophilic Hg²⁺–Ag⁺ interaction, which effectively quenched the fluorescence of AuAg NCs. Furthermore, these fluorescent nanoprobes could be readily applied to Ag⁺ and Hg²⁺ detection in environmental water samples, indicating their possibility to be utilized as a convenient, dual functional, rapid response, and label-free fluorescence sensor for related environmental and health monitoring.     

Fluorescent Gold Clusters as Logic Gates for the Detection of Different Metal Ions

Metal cations can be selectively detected by restoring and quenching the fluorescent intensity of an “ON–OFF” gold nanocluster (Au NC ) sensor. The fluorescent intensity of Au NCs with metal cations can be restored by chelating with ethylenediaminetetraacetic acid except for Hg²⁺ ions. A highly selective detection of Hg²⁺ ion is also achieved under the coexistence of Fe³⁺ or Cr³⁺ ions. This assay was applied successfully for detecting Hg²⁺ in a water sample. The dynamic range of the system was 1 ppm to 25 ppb, and the limit of detection was 25 ppb.     

An Aurone‐derived Low‐molecular‐weight Fluorescence Probe for the Detection of Hg2+ in Aqueous Solution and Living Cells

A low‐molecular‐weight fluorescent probe 1 (M.W. = 238.24) based on aurone was synthesized, and its application in fluorescent detection of Hg²⁺ in aqueous solution and living cells was reported. It exhibited an “on–off” fluorescent response toward Hg²⁺ in aqueous solution. Both the color and fluorescence changes of the probe were remarkably specific for Hg²⁺ in the presence of other common metal ions, satisfying the selective requirements for biomedical and environmental monitoring application. The probe has been applied in direct measurement of Hg²⁺ content in river water samples and imaging of Hg²⁺ in living cells, which further indicates the potential application values in environmental and biological systems.     

Dual recognition strategy for ultra-sensitive fluorescent detection of Hg2+ at femto-molar level based on aptamer functionalized sulfur quantum dots

In the present study, a dual recognition strategy for ultrasensitive detection of Hg²⁺ was successfully developed for the first time based on aptamer functionalized sulfur quantum dots (Apt-SQDs). The developed Apt-SQDs not only retained the good fluorescence properties of quantum dots but also overcame the problem of poor selectivity of SQDs for heavy metal ions. This system used the dual recognition strategy, including the combination of S_x^2? and Hg²⁺ and T-Hg²⁺-T structures to excellently identify and capture Hg²⁺, and an ultrahigh sensitivity fluorescent aptasensor was fabricated. The fluorescent aptasensor had a good response to Hg²⁺ at concentrations ranging of 10^?15 to 10^?7 M with an ultralow limit of detection of 0.3 fM, and the response to other metal ions was far less than that to Hg²⁺. It was successfully applied to detect Hg²⁺ in nearby environmental water samples (tap water, lake water and river water) with a good recovery rate. Moreover, portable test papers that would be useful for Hg²⁺ monitoring in environmental water were designed. The dual recognition strategy not only achieves ultrasensitive fluorescent detection of Hg²⁺ but also provides a new insight into the further expansion of the application of SQDs.     

Turn‐on fluorogenic and chromogenic detection of cations in complete water media with poly(N‐vinyl pyrrolidone) bearing rhodamine B derivatives as polymeric chemosensor

A hydrophobic organic monomer GRBE with a polymerizable methacrylester moiety had been synthesized by reaction of rhodamine B‐ethanediamine with glycidyl methacrylate. A water‐soluble polymeric chemosensor poly(VP‐GRBE) had been prepared via copolymerization with a hydrophilic comonomer (vinylpyrrolidone) and GRBE, which was able to sense environmentally poisonous cations in completely aqueous media. The chemosensor was a derivative of rhodamine B, which behaved as a fluorescent and chromogenic sensor toward various heavy cations, particularly Cr³⁺, Fe³⁺, and Hg²⁺. Titration curves of Cr³⁺, Fe³⁺, and Hg²⁺ were constructed using rapid, cheap, and widely available technique of fluorescence spectroscopies. The detection limits for Cr³⁺, Fe³⁺, or Hg²⁺ ions were found to be 2.20 × 10^?12, 2.39 × 10^?12, and 1.11 × 10^?12 mol/l in the same medium, respectively. Moreover, a colorimetric response from the polymeric chemosensor permitted the detection of Cr³⁺, Hg²⁺, or Fe³⁺ by “naked eye” because of the development of a pink or brown yellow color when Cr³⁺, Hg²⁺, or Fe³⁺ cations interacted with the copolymer in aqueous media. Copyright © 2015 John Wiley & Sons, Ltd.     

Multiplex sensor for detection of different metal ions based on on–off of fluorescent gold nanoclusters

In this study, a multiplex fluorescence sensor for successive detection of Fe³⁺, Cu²⁺ and Hg²⁺ ions based on “on–off” of fluorescence of a single type of gold nanoclusters (Au NCs) is described. Any of the Fe³⁺, Cu²⁺ and Hg²⁺ ions can cause quenching fluorescence of Au NCs, which established a sensitive sensor for detection of these ions respectively. With the introduction of ethylene diamine tetraacetic acid (EDTA) to the system of Au NCs and metal ions, a restoration of fluorescence may be found with the exception of Hg²⁺. A highly selective detection of Hg²⁺ ion is, thus, achieved by masking Fe³⁺ and Cu²⁺. On the other hand, the masking of Fe³⁺ and Cu²⁺ leads to the enhancement of fluorescence of Au NCs, which in turn provides an approach for successive determination of Fe³⁺ and Cu²⁺ based on “on–off” of fluorescence of Au NCs. Moreover, this assay was applied to the successful detection of Fe³⁺, Cu²⁺ and Hg²⁺ in fish, a good linear relationship was found between these metal ions and the degree of quenched fluorescent intensity. The dynamic ranges of Hg²⁺, Fe³⁺ and Cu²⁺ were 1.96 × 10⁻¹⁰–1.01 × 10⁻⁹, 1.28 × 10⁻⁷–1.27 × 10⁻⁶ and 1.2 × 10⁻⁷–1.2 × 10⁻⁶ M with high sensitivity (the limit of detection of Fe³⁺ 2.0 × 10⁻⁸ M, Cu²⁺ 1.9 × 10⁻⁸ M and Hg²⁺ 2 × 10⁻¹⁰ M). These results indicate that the assay is suitable for sensitive detection of these metal ions even under the coexistence, which can not only determine all three kinds of metal ions successively but also of detecting any or several kinds of metal ions.     

FRET‐based Fluorescent and Colorimetric Probe for Selective Detection of Hg(II) and Cu(II) with Dual‐mode

A dual‐function fluorescence resonance energy transfer (FRET)‐based fluorescent and colorimetric probe was rationally fabricated from an energy donor coumarin moiety and an energy acceptor rhodamine moiety linked by a thiohydrazide arm for selective detection of Hg²⁺ and Cu²⁺. Two distinct mechanisms were used for the selective detection. Results revealed that probe 1 showed high fluorescent selectivity towards Hg²⁺ and evident colorimetric selectivity for Cu²⁺, which was suitable for ‘naked‐eye’ detection.     

Selective Hg2+ sensor performance based various carbon‐nanofillers into CuO‐PMMA nanocomposites

Ternary nanocomposites (NCs) containing copper oxide (CuO)/poly(methyl methacrylate)/various carbon‐based nanofillers have been successfully prepared as thin films by an ex situ method as a selective Hg⁺² sensor. The structural, morphological, and electrochemical properties of the NCs were identified by all common characterization tools. The FT‐IR curves of these NCs proved the efficiency of CuO mixed with single‐walled CNTs (CuO/SWCNTs), multi‐walled CNTs (CuO/MWCNTs), or graphene (CuO/G) nanoparticles in the PMMA polymer matrix. The mixed nanofillers significantly improved the properties of the PMMA film. The thermal characteristics of the pure PMMA polymer matrix were highly developed by adding nanofillers in the form of NCs. The maximum composite degradation temperature (CDT_max) values were comparable for all the NCs and were in the range of 345 to 406°C. For fabrication, the CuO‐PMMA‐SWCNT, CuO‐PMMA‐MWCNT, and CuO‐PMMA‐GNCs were coated onto a glassy carbon electrode (GCE) to form a tiny layer with orderly thickness using a conductive 5% Nafion chemical binder. During the electrochemical investigation, it was found that CuO‐PMMA‐SWCNT had the maximum response toward Hg²⁺ ions compared to the other nanofillers in a buffer medium (phosphate type). To calibrate the Hg²⁺ ionic sensor, the data were plotted against Hg²⁺ ion concentration and the proposed sensor showed linearity over a wide range of concentrations (0.1‐0.01 mM), which is called the linear dynamic range (LDR). The analytical parameters, such as sensitivity (1.70 × 102 μAμM^‐1 cm^?2), detection limit (55.76 ± 2.79 pM), and limit of quantification (185.87 pM) were calculated from the calibration curve. Moreover, it showed good reproducibility, fast response time, good linearity, large LDR, and good stability. The CuO‐PMMA‐SWCNT NC‐modified GCE offers a new route to fabricate novel heavy metal ionic sensors, which might be used in green environment and health development applications.     

Anodic Stripping Voltammetric Determination of Mercury(II) in Water Using a 4‐Tert‐Butyl‐1‐(Ethoxycarbonylmethoxy)Thiacalix[4]Arene Modified Glassy Carbon Electrode

A glassy carbon electrode coated the film of 4‐tert‐butyl‐1‐(ethoxycarbonylmethoxy)thiacalix[4]arene is designed for the determination of trace amounts of Hg²⁺. Compared with bare glassy carbon electrode, the modified electrode can improve the measuring sensitivity of Hg²⁺. Under the optimum experimental condition, the modified electrode in 0.1 mol L^?1 H₂SO₄ + 0.01 mol L^?1 KCl solution shows a linear voltammetric response in the range of 8.0 × 10^?9 ～ 3.0 × 10^?6 mol L^?1 with detection limit 5.0 × 10^?9 mol L^?1 for Hg²⁺. The high sensitivity, selectivity, and stability of modified electrode also prove its practical application for a simple, rapid and economical determination of Hg²⁺ in water samples.     

Multimodal Use of New Coumarin‐Based Fluorescent Chemosensors: Towards Highly Selective Optical Sensors for Hg2+ Probing

Despite several types of fluorescent sensing molecules have been proposed and examined to signal Hg²⁺ ion binding, the development of fluorescence‐based devices for in‐field Hg²⁺ detection and screening in environmental and industrial samples is still a challenging task. Herein, we report the synthesis and characterization of three new coumarin‐based fluorescent chemosensors featuring mixed thia/aza macrocyclic framework as receptors units, that is, ligands L1 – L3 . These probes revealed an OFF–ON selective response to the presence of Hg²⁺ ions in MeCN/H₂O 4:1 (v/v), which allowed imaging of this metal ion in Cos‐7 cells in vitro. Once included in silica core–polyethylene glycol (PEG) shell nanoparticles or supported on polyvinyl chloride (PVC)‐based polymeric membranes, ligands L1 – L3 can also selectively sense Hg²⁺ ions in pure water. In particular we have developed an optical sensing array tacking advantage of the fluorescent properties of ligand L3 and based on the computer screen photo assisted technique (CSPT). In the device ligand L3 is dispersed into PVC membranes and it quantitatively responds to Hg²⁺ ions in natural water samples.     

Luminescent silver nanoclusters for efficient detection of adenosine triphosphate in a wide range of pH values

In this work, polymethacrylic acid (PMAA)-templated silver nanoclusters (Ag NCs) were developed as the fluorescent probe for the efficient and sensitive detection of adenosine triphosphate (ATP) in a wide range of pH values. The fluorescence intensity of the Ag NCs could keep stable with pH values ranging from 2.5 to 9.3. The detection of ATP was based on the quenching of the fluorescent Ag NCs in the presence of ATP. The fluorescence quenching of the Ag NCs with increasing ATP concentration was studied at pH 2.5, 4.5, 7.0 and 8.5 which involved a wide pH environment in body fluids. The limit of detection (LOD) for ATP was as low as 0.1 mmol/L in an acidic environment with pH of 2.5 and all the linear correlation coefficients were satisfactory under wide-span pH values from 2.5 to 8.5. In addition, the sensitive determination of ATP was also achieved by adding copper ions (Cu²⁺). The high selectivity and rapid detection process proved that the fluorescent probe had great potential to detect ATP in biological samples under different pH conditions.     

基于四丹磺酰胺杯[4]芳烃的汞离子荧光化学传感器

我们方便地合成了上沿修饰四丹磺酰胺基团的杯[4]芳烃衍生物1,发现该化合物在含50％水的乙腈中显示出对汞离子高选择性和灵敏性的识别作用,竞争实验表明多数金属离子对其检测干扰较小。机理研究结果表明荧光萃灭源于由丹磺酰胺基团到汞离子的光致电子转移过程。另外,通过研究1和1-Hg2+的荧光衰减实验,以及对比双丹磺酰胺杯[4]芳烃2和单丹磺酰胺杯[4]芳烃3对汞离子的识别作用,发现化合物1的四丹磺酰胺基团具有很好的预组织和协同作用。化合物1对汞离子的检测限为3.41×10-6 mol·L-1,这可以使1成为一个潜在的汞离子荧光化学传感器。     

Selective detection of Hg2+ ion in aqueous medium with the use of 3‐(pyrimidin‐2‐ylimino)indolin‐2‐one‐functionalized SBA‐15

An isatin‐based fluorophore, 3‐(pyrimidin‐2‐ylimino)indolin‐2‐one, was grafted on a large‐pore mesoporous silica material (SBA‐15) via a two‐step modification process. The obtained material (SBA‐Is‐Py) was characterized using various techniques and the characterization showed that the ordered porous structure was preserved after the post‐grafting procedure. The optical sensing ability of SBA‐Is‐Py was studied upon the addition of a variety of metal ions and a marked fluorescence quenching by Hg²⁺ ion was observed. SBA‐Is‐Py exhibited excellent Hg²⁺‐specific luminescence quenching over various competing cations. Furthermore, linear changes of the optical properties of SBA‐Is‐Py as a function of the concentrations of Hg²⁺ ion were found, with a calculated detection limit of 3.28 × 10^?7 M. In addition, SBA‐Is‐Py was successfully employed for the determination of Hg²⁺ in real water samples.     

Label-free colorimetric sensor for mercury(II) and DNA on the basis of mercury(II) switched-on the oxidase-mimicking activity of silver nanoclusters

In this paper, a novel colorimetric biosensor for Hg²⁺ and DNA molecules is presented based on Hg²⁺ stimulated oxidase-like activity of bovine serum albumin protected silver clusters (BSA-Ag NCs). Under mild conditions, Hg²⁺ activated BSA-Ag NCs to show high catalytic activity toward the oxidation of 3,3′,5, 5′-tetramethylbenzidine (TMB) using ambient dissolved oxygen as an oxidant. The oxidase-like activity of BSA-Ag NCs was “switched-on” selectively in the presence of Hg²⁺, which permitted a novel and facile colorimetric sensor for Hg²⁺. As low as 25 nmol L⁻¹ Hg²⁺ could be detected with a linear range from 80 nmol L⁻¹ to 50 mmol L⁻¹. In addition, the sensing strategy was also employed to detect DNA molecules. Hg²⁺ is known to bind very strongly and specifically with two DNA thymine bases (T) to form thymine–Hg²⁺–thymine (T–Hg²⁺–T) base pairs. The hairpin-structure was disrupted and Hg²⁺ ions were released after hybridization with the DNA target. By coupling the Hg²⁺ switched-on the oxidase-mimicking activity of BSA-Ag NCs, we developed a novel label-free strategy for facile and fast colorimetric detection of DNA molecules. More important, target DNA can be detected as low as 10 nmol L⁻¹ with a linear range from 30 to 225 nmol L⁻¹. Compared with other methods, this method presents several advantages such as the independence of hydrogen peroxide, high sensitivity and good selectivity, avoiding any modification or immobilization of DNA, which holds a great potential of metal NCs for clinical application in biosensing and biotechnology.     

2-(2′-Hydroxyphenyl)-4(3H)-quinazolinone derivatives based fluorescent probes for mercury(II) via an intramolecular proton transfer mechanism

2-(2′,5′-Dihydroxy-phenyl)-4(3H)-quinazolinone (DHPQ), a new fluorescent dye that exhibits excited state intramolecular proton transfer (ESIPT) reaction and possesses good photophysical properties, is synthesised and used as fluorescent probe for detection of Hg²⁺. Mercuric ions can be detected and quantitated by measuring the fluorescent intensity decrease of the probe. The decrease of fluorescence intensity of DHPQ upon the addition of Hg²⁺ was attributed to the blocking of ESIPT reactions of DHPQ and quenching its fluorescence. The analytical performance characteristics of the proposed Hg²⁺ probe were investigated. The probe can be applied to the quantification of Hg²⁺ with a concentration range covering from 8.0?×?10^?7 to 2.0?×?10^?4?mol?L^?1, with a working pH range of 5.5–6.5. It shows excellent selectivity for Hg²⁺ over other transition metal cations. The proposed method was testified for the Hg²⁺ assay in river water samples with satisfying recoveries.     

Selective Detection of Hg2+ Ions with Boron Dipyrromethene‐Based Fluorescent Probes Appended with a Bis(1,2,3‐triazole)amino Receptor

By using a copper‐promoted alkyne–azide cycloaddition reaction, two boron dipyrromethene (BODIPY) derivatives bearing a bis(1,2,3‐triazole)amino receptor at the meso position were prepared and characterized. For the analogue with two terminal triethylene glycol chains, the fluorescence emission at 509 nm responded selectively toward Hg²⁺ ions, which greatly increased the fluorescence quantum yield from 0.003 to 0.25 as a result of inhibition of the photoinduced electron transfer (PET) process. By introducing two additional rhodamine moieties at the termini, the resulting conjugate could also detect Hg²⁺ ions in a highly selective manner. Upon excitation at the BODIPY core, the fluorescence emission of rhodamine at 580 nm was observed and the intensity increased substantially upon addition of Hg²⁺ ions due to inhibition of the PET process followed by highly efficient fluorescence resonance energy transfer (FRET) from the BODIPY core to the rhodamine moieties. The Hg²⁺‐responsive fluorescence change of these two probes could be easily seen with the naked eye. The binding stoichiometry between the probes and Hg²⁺ ions in CH₃CN was determined to be 1:2 by Job′s plot analysis and ¹H NMR titration, and the binding constants were found to be (1.2±0.1)×10¹¹ m ^?2 and (1.3±0.3)×10¹⁰ m ^?2, respectively. The overall results suggest that these two BODIPY derivatives can serve as highly selective fluorescent probes for Hg²⁺ ions. The rhodamine derivative makes use of a combined PET‐FRET sensing mechanism which can greatly increase the sensitivity of detection.     

A label-free and signal-on supersandwich fluorescent platform for Hg sensing

A label-free supersandwich fluorescent assay was demonstrated for the first time by taking Hg²⁺ as a detection candidate. The principle of the proposed supersandwich fluorescent platform is based on the formation of supersandwich structure by T-Hg²⁺-T coordination and the fluorescence enhancement of the intercalated Genefinder (GF) in double strand DNA (dsDNA). Such supersandwich fluorescent DNA sensor exhibits a linear range of 10–300 nM for the detection of Hg²⁺, with a detection limit of 2.5 nM on the basis of the 3σ/slope (σ represents the standard deviation of the blank samples), which is well below the permit of the U.S. Environmental Protection Agency (<10 nM). The detection can be fulfilled in less than 10 min. The proposed mix-and-detect fluorescent platform exhibits excellent sensitivity, selectivity, and convenient manipulation. The assay was successfully used to detect Hg²⁺ in the lake water samples, which suggested its potential in practical samples.