萃取色谱分离-原子发射光谱测定超高纯氧化铥、氧化镱和氧化镥中痕量稀土杂质

用２－乙基己基膦酸单２－乙基己酯萃取色谱分离－原子发射光谱测定超高纯Ｔｍ２Ｏ３、Ｙｂ２Ｏ３、Ｌｕ２Ｏ３中痕量稀土杂质，可用于纯度为９９．９９９９％～９９．９９９９９％（不含非稀土杂质）Ｔｍ２Ｏ３、Ｙｂ２Ｏ３、Ｌｕ２Ｏ３的纯度分析，１４个稀土杂质的回收率在６７％～１３３％之间；相对标准偏差 ５．１％～２３．２％；分离周期 １０～１３ ｈ。     

硫铁矿烧渣制备氧化铁黄和氧化铁红

对利用硫铁矿烧渣制备氧化铁黄和氧化铁红进行了研究。考察了影响硫铁矿烧渣还原、酸溶、中和、氧化等过程的各种因素。结果表明,在适宜的条件下,利用烧渣可以制备出用做颜料的氧化铁黄和氧化铁红。     

氧化石墨烯水热还原前后的发光光谱

分别采用改进Hummers方法和水热还原法制备了氧化石墨烯(GO)和还原氧化石墨烯(RGO)。 GO和RGO经透射电子显微镜(TEM)、紫外-可见吸收光谱(UV-Vis)、红外光谱(IR)、荧光发射和激发光谱(PL、PLE)等技术手段进行了表征。 荧光发射光谱显示,氧化石墨烯(GO)在可见光的激发下可以得到波长在600~800 nm范围内的宽谱近红外荧光。 通过比较氧化石墨烯水热还原前后的光谱变化,发现氧化石墨烯近红外荧光起源于氧化石墨烯的表面含氧基团,如C=O、COOH。 近红外荧光穿透性好、对生物组织损坏小,非常适合于生物成像,预示着氧化石墨烯在生物成像方面的应用潜力。     

氧化环己烯连续进料下二氧化碳-环氧丙烷-氧化环己烯三元共聚物的合成

由于氧化环己烯（CHO）与二氧化碳的共聚反应速度比其与环氧丙烷（PO）快,这种竞聚率的差异导致一锅法所得的二氧化碳-环氧丙烷-氧化环己烯三元共聚物的组成难以稳定控制。 为此本文在稀土三元催化剂下,采用氧化环己烯单体连续进料的方法合成了二氧化碳-环氧丙烷-氧化环己烯三元共聚物,催化效率可达575 g/(mol Zn h)。 三元共聚物的玻璃化转变温度随CHO含量升高而增大,当CHO的摩尔投料比从0.19增加到0.59时,玻璃化温度从44.3 ℃提高到70.1 ℃。 CHO连续进料合成的三元共聚物的组成与投料比基本相近,且连续进料法所合成的三元共聚物只有一个玻璃化转变温度,而普通的一锅法所得的三元共聚物通常存在两个玻璃化转变温度,因此连续进料法是制备组成稳定的二氧化碳-环氧丙烷-氧化环己烯三元共聚物的有效方法。     

Nitrogen Oxide Fluorides

Oxyfluorides of nitrogen, i.e. compounds containing the grouping F? N? O, have been known for many years in the form of simple compounds, such as NOF and NO₂F. Detailed studies of physical, structural, and chemical aspects of this class of compounds have been conducted only in recent years, after the potential of N? F compounds as rocket propellants had been recognized. Several novel types of oxyfluorides of nitrogen, such as difluorohydroxyl amines, RO? NF₂, or trifluoroamine oxide, F₃NO, have been discovered recently. A further major development in O? N? F chemistry is indicated by the discovery that compounds of great chemical potential are formed between HF and NOF or NO₂F, respectively. The compound O₂NOF, although not an oxyfluoride of nitrogen, will also be discussed in this review, because of its particular chemical relationship to NO₂F.     

环氧乙烷环氧丙烷开环聚合反应动力学研究

环氧乙烷和环氧丙烷由于具有较高的环张力,因而容易发生开环聚合。本文综述了环氧乙烷合环氧丙烷开环聚合反应的动力学研究进展,考察了环氧乙烷和环氧丙烷开环聚合反应的机理,分别讨论了各类催化剂体系中环氧乙烷和环氧丙烷开环聚合的动力学常数、两者的竞聚率及开环聚合产物的分子量分布,并指出了开环聚合反应动力学研究对于环氧乙烷和环氧丙烷的开环聚合研究及工业应用的重要性。     

游离氧化钙,氧化镁连续测定的电导法研究

研究了乙二醇对氧化钙，氧化镁的提取条件，利用乙二醇提取氧化钙后在催化剂存在下继续提取氧化镁，建立了电导法连续测定ＣａＯ，ＭｇＯ分析方法，可用于水泥熟料中游离氧化钙，氧化镁的测定。     

Octahedral Cuprous Oxide Decorated Flexible Reduced Graphene Oxide Paper for Food Sensing Application

This work presents a simple method to fabricate an octahedral cuprous oxide (Cu₂O) decorated two-dimensional (2D) flexible rGOP electrode with filtration and electrodeposition strategies. The characteristic of the Cu₂O/rGOP electrodes was recorded by SEM, EDX, XPS, XRD, and Raman spectroscopy. The results clearly showed that Cu₂O was successfully electrodeposited on the surface of rGOP by controlling the electrodeposition potential without the introduction of any template or surfactant. The electrochemical characterizations of the Cu₂O/rGOP exhibited high electrocatalytic activity toward the reduction of H₂O₂. The linear detection range for the Cu₂O/rGOP flexible sensor was 5.0 μM to 5.5 mM, with a limit of detection of 1.27 μΜ. Subsequently, the developed flexible rGOP sensor was extended for H₂O₂ detection in milk samples for avoiding milk spoilage_. Such judicial preparation of rGOP as a sensing device will certainly pave the way for various other sensing applications including environmental and biomedical applications.     

Plasma Synthesis of Advanced Metal Oxide Nanoparticles and Their Applications as Transparent Conducting Oxide Thin Films

This article reviews and summarizes work recently performed in this laboratory on the synthesis of advanced transparent conducting oxide nanopowders by the use of plasma. The nanopowders thus synthesized include indium tin oxide (ITO), zinc oxide (ZnO) and tin-doped zinc oxide (TZO), aluminum-doped zinc oxide (AZO), and indium-doped zinc oxide (IZO). These oxides have excellent transparent conducting properties, among other useful characteristics. ZnO and TZO also has photocatalytic properties. The synthesis of these materials started with the selection of the suitable precursors, which were injected into a non-transferred thermal plasma and vaporized followed by vapor-phase reactions to form nanosized oxide particles. The products were analyzed by the use of various advanced instrumental analysis techniques, and their useful properties were tested by different appropriate methods. The thermal plasma process showed a considerable potential as an efficient technique for synthesizing oxide nanopowders. This process is also suitable for large scale production of nano-sized powders owing to the availability of high temperatures for volatilizing reactants rapidly, followed by vapor phase reactions and rapid quenching to yield nano-sized powder.     

CuO／活性炭和Fe2O3／活性炭催化还原NO

ＣｕＯ／活性炭和Ｆｅ_２Ｏ_３／活性炭催化还原ＮＯ高志明，赵震，杨向光，吴越（中国科学院长春应用化学研究所长春１３００２２）关键词活性炭，还原，ＮＯ，氧化铜，氧化铁目前，对固定源的ＮＯ处理是采用Ｖ２Ｏ５／ＴｉＯ２作催化剂，ＮＨ３作还原剂的选择催化还原方...     

^13C—NMR研究环氧乙烷—环氧丙烷无规共聚物的序列结构

利用高分辨核磁共振谱仪研究了环氧乙烷－环氧丙烷均聚物和无规共聚物的核磁共振主链碳谱。在对其链结构进行有效归属的基础上，讨论了不同配比聚合物的僚共振主链碳谱特点及其可能的单元链节排列顺序。     

环氧乙烷和环氧丙烷共聚物及其LiClO4复合物的热性能

用ＤＳＣ研究了环氧乙烷和环氧丙烷共聚物（ＥＯ／ＰＯ）及其ＬｉＣｌＯ＿４复合物的组成与热性能的关系，结果表明，结晶熔融热溶随ＰＯ的增加而减少，同时，结晶度下降，电导率上升；Ｏ／Ｌｉ＝２０的试样在２次升温中产生冷结晶；热历史影响聚合物的热性能。     

Effect of Calcium Oxide Additive on the Performance of Iron Oxide Sorbent for High-Temperature Coal Gas Desulfurization

The effect of calcium oxide additive in iron oxide sorbent for hot gas desulfurization was investigated by XRD and TPR techniques.XRD characterization showed that CaO was highly dispersed after the calcination of sorbents.Calcium sulfate formed in the desulfurization was decomposed and regenerated to CaO by reacting with CO before the next sulfidation process.Calcium participated in every sulfidation/regeneration cycle and contributed to the enhancement of sulfur capacity.The TPR results showed that the reduction temperature of the sorbent increased with the increase of the content of calcium.Calcium played a role of retarding reduction.Therefore,the addition of calcium oxide additive will benefit the utilization of iron oxide sorbent in strongly reducing atmospheres.     

Effect of Calcium Oxide Additive on Sorbent for High-Temperature the Performance of Iron Oxide Coal Gas Desulfurization

The effect of calcium oxide additive in iron oxide sorbent for hot gas desulfurization was investigated by XRD and TPR techniques. XRD characterization showed that CaO was highly dispersed after the calcination of sorbents. Calcium sulfate formed in the desulfurization was decomposed and regenerated to CaO by reacting with CO before the next sulfidation process. Calcium participated in every sulfidation/regeneration cycle and contributed to the enhancement of sulfur capacity. The TPR results showed that the reduction temperature of the sorbent increased with the increase of the content of calcium. Calcium played a role of retarding reduction. Therefore, the addition of calcium oxide additive will benefit the utilization of iron oxide sorbent in strongly reducing atmospheres.     

甲氨蝶呤与一氧化氮供体或一氧化氮合酶抑制剂组合物的合成

一氧化氮(nitric oxide,NO)在肿瘤病理生理过程中产生多方面的生化作用,诸如引起的某些核苷酸碱基的羟基化,参与免疫系统清除肿瘤细胞,促进肿瘤细胞凋亡和调节血管生成等．在此基础上,首次提出将NO供体(NO donor)或一氧化氮合酶(nitric oxide synthase,NOS)抑制剂分别连接到甲氨蝶呤(methotrexate,MTX,MTX本身就是NOS抑制剂)的α或γ位羧基上的设想,设计并合成出：(1)MTX-NO供体(3-羟甲基-4-苯基-1,2,5-噁二唑-2-氧化物,属于Furoxan衍生物,缩写为FU)：1a(MTX-α-FU),2a(MTX-γ-FU);(2)MTX-NOS抑制剂(L-N^ω-硝基精氨酸或L-N^ω-硝基精氨酸甲酯)：1b(MTX-α-L-N^ω-NO2-Arg),2b(MTX-γ-L-N^ω-NO2-Arg),1c(MTX-α-L-N^ω-NO2-Arg-OMe),2c(MTX-γ-L-N^ω-NO2-Arg-OMe)．在生物活性测试中,我们选择耐MTX细胞株K-562(慢性粒细胞性白血病急性病变细胞株),进行抗肿瘤活性测试,得到以下结果：(1)脂溶性差的MTX衍生物1b,2b抗肿瘤活性低于MTX,其它1a,2a;1c,2c均优于MTX;(2)连接有NO供体的MTX明显增强了MTX衍生物的抗肿瘤活性;(3)MTX中谷氨酸γ位组合物抗肿瘤活性均高于相应的α位异构体的活性．以上初步结果,将对进一步研究NO抗肿瘤作用以及新的抗肿瘤药物设计提供新的思路,对肿瘤临床化疗也有一定的参考价值．     

稀土三元催化剂催化二氧化碳/环氧丙烷/环氧环己烷的三元共聚合研究

在稀土三元催化剂(三氯乙酸稀土配合物/二乙基锌/甘油)催化下实现了二氧化碳、环氧丙烷及环氧环己烷的三元共聚合.该催化剂对二氧化碳与环氧环己烷共聚的催化活性比对二氧化碳与环氧丙烷共聚的高.增加反应单体中环氧环己烷的比例可提高共聚物中环己撑碳酸酯的含量,大幅度改善共聚物的耐热性.     

环氧乙烷环氧丙烷共聚醚的研究进展

综述了环氧乙烷环氧丙烷共聚醚的聚合机理聚合工艺及其应用.环氧乙烷环氧丙烷共聚醚的聚合按其催化剂体系的机理可以分为阴离子聚合、阳离子聚合和配位聚合三类,其中阳离子聚合应用较少.在环氧乙烷和环氧丙烷开环聚合生成共聚醚的反应中,不同的反应工艺条件对生成的聚醚有着很大的影响.同样比例的环氧乙烷和环氧丙烷,因聚合反应器设计、反应器种类、起使剂种类催化剂种类与用量温度加料方式端基结构等的不同,所合成的共聚醚会产生不同的结构和性能.环氧乙烷环氧丙烷共聚形成的聚醚可以分为嵌段共聚醚和无规共聚醚两类.其中,嵌段共聚醚可以分为EPE和PEP两类.     

锌铈混合金属氧化物薄膜电化学沉积的研究

采用自制四电极体系,原位测量锌铈混合氧化物薄膜电沉积过程电极/溶液界面pH的动态变化。电极/溶液界面的pH-时间曲线表明,pH快速上升后达到平衡,且电沉积过电位越大,达到平衡pH值的时间越短,平衡pH值也越高。X射线粉末衍射(XRD)实验证明薄膜沉积物是由ZnO和CeO2组成。电感耦合等离子体(ICP)技术分析了不同电沉积电位、不同电沉积时间下电沉积产物中Ce(Ⅲ)/Zn(Ⅱ)的物质的量比,结果表明Ce(Ⅲ)/Zn(Ⅱ)的物质的量比随着pH值的升高而增加。依据Zn2+离子和Ce3+离子液相和固相中存在形态的热力学数据,计算了2种金属离子的条件溶解度随pH的变化曲线。结合实验测试数据和理论计算结果,讨论了电极表面金属氧化物的电化学沉积机理,并阐明了阴极表面混合金属氧化物的组成取决于液-固两相中金属离子存在形态的热力学性质。     

高温固体氧化物燃料电池（SOFC）进展

固体氧化物燃料电池(SOFC) 采用的是全固体的电池结构, 不存在液体电解质带来的腐蚀和流失等问题, 而且具有燃料适应性广等突出优点, 近几年发展非常迅速, 已经展示出作为集中或分散发电新技术的前景。本文较详细地介绍了固体氧化物燃料电池的特点、工作原理和关键电池材料的研制, 并全面阐述了国内外发展现状和发展趋势。     

火花源质谱法定量分析高纯氧化钬和氧化镥中痕量元素

本文采用相对灵敏度因子，研究了９９．９９９％－９９．９９９９％的Ｈｏ２Ｏ３和Ｌｕ２Ｏ３中４０余种杂质元素的火花源定量分析方法，讨论了谱线干扰。做了加入回收及生理性实验，大多数元素的相对标准偏差在３０％以内，检测下限为０．００ｘμｇ／ｇ。