Synthesis of Unsymmetrical 1,3‐Diynes via Pd/Cu‐Catalyzed Cross‐Coupling of Terminal Alkynes at Room Temperature

A facile and practical synthetic route of unsymmetrical 1,3‐diynes via the PdCl/CuI catalyzed oxidative coupling of two different terminal alkynes has been developed by using 3‐(diphenylphosphino)propanoic acid as a ligand in the presence of oxygen. This system is suitable for not only aromatic alkynes but also heteroaromatic and aliphatic alkynes which were transformed into the corresponding unsymmetrical 1,3‐diynes in moderate to good yields at room temperature. Moreover, the unsymmetrical 1,3‐diynes were also obtained on a multi‐gram scale. Mechanistic studies suggest that oxygen plays a key role in the catalytic cycles.     

CuI‐catalyzed homocoupling of terminal alkynes to 1,3‐diynes

A simple and efficient protocol for CuI‐catalyzed oxidative homocoupling reaction of terminal alkynes to symmetrical 1,4‐disubstituted 1,3‐diynes was reported. The reaction can be carried out in the open air, using NaOAc as a base in the absence of any other additives. A variety of terminal alkynes were converted to the corresponding 1.3‐diynes in good to excellent yields without any side product formation. Copyright © 2010 John Wiley & Sons, Ltd.     

An alternative CuCl–piperidine‐catalyzed oxidative homocoupling of terminal alkynes affording 1,3‐diynes in air

CuCl with the use of a catalytic amount of piperidine as additive shows high catalytic activity for the oxidative homocoupling reactions of terminal alkynes in toluene at 60 °C in air to afford 1,3‐diynes in high yields. Copyright © 2009 John Wiley & Sons, Ltd.     

3‐(Diphenylphosphino)propanoic acid: an efficient ligand for the Pd/Cu‐catalyzed homo‐coupling of terminal alkynes in the presence of oxygen at room temperature

A simple, yet efficient system for PdCl₂/CuI to catalyze the homo‐coupling reactions of various terminal alkynes has been developed using 3‐(diphenylphosphino)propanoic acid as ligand in the presence of oxygen. The alkynes, including aromatic, heteroaromatic and aliphatic alkynes, were transformed at room temperature into the corresponding 1,3‐diynes in moderate to excellent yields. The turnover number was up to 1.04 × 10³. Copyright © 2015 John Wiley & Sons, Ltd.     

Copper‐Catalyzed Aerobic Oxidative Transformation of Ketone‐Derived N‐Tosyl Hydrazones: An Entry to Alkynes

A novel strategy involving Cu‐catalyzed oxidative transformation of ketone‐derived hydrazone moiety to various synthetic valuable internal alkynes and diynes has been developed. This method features inexpensive metal catalyst, green oxidant, good functional group tolerance, high regioselectivity and readily available starting materials. Oxidative deprotonation reactions were carried out to form internal alkynes and symmetrical diynes. Cross‐coupling reactions of hydrazones with halides and terminal alkynes were performed to afford functionalized alkynes and unsymmetrical conjugated diynes. A mechanism proceeding through a Cu‐carbene intermediate is proposed for the C? C triple bond formation.     

Synthesis of Spirocyclic C‐Arylglycosides and ‐Ribosides by Ruthenium‐Catalyzed Cycloaddition

Spirocyclic C‐arylglycosides were synthesized from the appropriately protected δ‐gluconolactones. Addition of lithium acetylide followed by glycosylation with 3‐(trimethylsilyl)propargyl alcohol converted the δ‐gluconolactones into silylated diynes. After desilylation, subsequent ruthenium‐catalyzed cycloaddition of the resultant diynes with alkynes or chloroacetonitrile gave spirocyclic C‐arylglycosides in good yields and selectivity. This strategy was also extended to the synthesis of spirocyclic C‐arylribosides from the known γ‐ribonolactone derivative. Moreover, silver‐catalyzed iodination of the sugar diynes followed by ruthenium‐catalyzed cycloaddition with acetylene delivered spirocyclic C‐iodophenylglycosides and ‐ribosides, which were subjected to palladium‐catalyzed C? C bond‐forming reactions and copper‐catalyzed coupling with nitrogen heterocycles to lead to various derivatives.     

CuI/amino acid‐catalyzed coupling and cyclization of β‐bromo‐α,β‐unsaturated amides with terminal alkynes leading to (3Z)‐3‐alkylidenepyrrol‐1‐ones

β‐Bromo‐α,β‐unsaturated amides are coupled and cyclized with terminal alkynes in DMF at 110 °C in the presence of a catalytic amount of CuI and amino acid along with a base to give the corresponding (3Z)‐3‐alkylidenepyrrol‐1‐ones in moderate to good yields. Copyright © 2013 John Wiley & Sons, Ltd.     

First report of a nano‐Cu2O‐catalyzed protocol for homo‐coupling reaction of terminal alkynes in water/ionic liquid medium

A new, efficient and green protocol for the nano‐Cu₂O‐catalyzed homo‐coupling reaction of terminal alkynes has been developed, using water/ionic liquid as an environmentally friendly solvent. Moreover, the system also allows the synthesis of unsymmetric 1,3‐diynes by cross‐coupling of two different terminal alkynes. It is noteworthy that the nano‐Cu₂O‐catalyzed methodology is a good supplement to copper catalyst for the Glaser‐type homo‐coupling reaction. Copyright © 2016 John Wiley & Sons, Ltd.     

A reusable CuSO4 · 5H2O/cationic 2,2′‐bipyridyl system catalyzed homocoupling of terminal alkynes in water

A reusable CuSO₄ · 5H₂O/cationic 2,2′‐bipyridyl system catalyzed the homocoupling reaction of terminal alkynes in water using I₂ as the additive in the presence or absence of tetrabutylammonium bromide, giving the 1,3‐diynes in good to high yields. After reaction, the residual aqueous solution could be reused several times. Copyright © 2011 John Wiley & Sons, Ltd.     

Magnetic copper ferrite catalyzed homo‐ and cross‐coupling reaction of terminal alkynes under ambient atmosphere

The application of non‐toxic and magnetically separable nano‐CuFe₂O₄ as an efficient catalyst for oxidative homo‐ and cross‐coupling reaction of terminal alkynes is described. A wide range of symmetrical and unsymmetrical 1,3‐diynes have been synthesized in moderate to good yields under ambient atmosphere. The nano CuFe₂O₄ can be recovered with a magnet and reused at least five consecutive cycles with no appreciable loss of its catalytic activity.     

Stereoselective Synthesis of (Z)‐4‐(2‐Bromovinyl)benzene‐sulfonyl Azide and Its Synthetic Utility for the Transformation to (Z)‐N‐[4‐(2‐Bromovinyl)benzenesulfonyl]imidates

A novel method for the stereoselective synthesis of (Z)‐4‐(2‐bromovinyl)benzenesulfonyl azide by simultaneous azidation and debrominative decarboxylation of anti‐2,3‐dibromo‐3‐(4‐chlorosulfonylphenyl)propanoic acid using NaN₃ only was developed. Facile transformation of (Z)‐4‐(2‐bromovinyl)benzenesulfonyl azide to (Z)‐N‐[4‐ (2‐bromovinyl)benzenesulfonyl]imidates was also achieved by Cu‐catalyzed three‐component coulping of (Z)‐4‐(2‐bromovinyl)benzenesulfonyl azide, terminal alkynes and alcohols/phenols.     

Copper‐catalyzed homo‐ and cross‐coupling reactions of terminal alkynes in ethyl lactate

The bio‐based chemical ethyl lactate (EL) has been discovered to be an excellent medium for the Glaser‐type homo‐ and cross‐coupling reactions of terminal alkynes. Good to excellent yields of conjugate diynes have been obtained under ligand‐free and mild heating conditions in the presence of CuI and molecular oxygen. Copyright © 2014 John Wiley & Sons, Ltd.     

一种经(E)-α-碘代烯基砜的钯催化交叉偶联反应立体选择合成(1Z,3E)-2-芳砜基取代的1,3-二烯的新方法

（E）-α-Stannylvinyl phenyl（or p-tolyl）sulfones underwent an iododestannylation reaction to afford （E）-α-iodovinyl phenyl（or p-tolyl）sulfones 1, which reacted with （E）-alkenylzirconium（IV） complexes 2 produced in situ by hydrozirconation of terminal alkynes in the presence of a Pd（PPh3）4 catalyst to afford stereoselectively （1Z,3E）-2- phenyl（or p-tolyl）sulfonyl-substituted 1,3-dienes 3 in good yields.     

Cu–N‐heterocyclic carbene‐catalysed synthesis of 2‐aryl‐3‐(arylethynyl)quinoxalines from one‐pot tandem coupling of o‐phenylenediamines and terminal alkynes

A series of new benzimidazolium chlorides bearing N,N′‐benzyl, 2,4,6‐trimethylbenzyl and 2,4,6‐triisopropylbenzyl substituents have been designed and synthesized from various o‐phenylenediamines. Subsequently, corresponding Cu‐based N‐heterocyclic carbenes (NHCs) were generated in situ in the reaction medium which represents a new application of NHCs exploiting distinct catalytic property towards intermolecular cyclization reaction cascade for the synthesis of 2‐aryl‐3‐(arylethynyl)quinoxalines from o‐phenylenediamines and terminal alkynes. The outcome of the cyclization reaction product depends upon the N,N′‐substituents present on the benzimidazolium chlorides.     

Highly Efficient Cycloaddition Reaction of 1,3‐Diynes with Sodium Azide: A New Way to 5‐Substituted‐4‐acetylene‐1H‐1,2,3‐triazoles

A cycloaddition reaction of a range of 1,3‐diynes with sodium azide has been realized, which provided 5‐substituted‐4‐acetylene‐1H‐1,2,3‐triazoles in 75–99% yields. The chemical structures of the new compounds 3 are established by IR, NMR, Mass, and HRMS.     

Multicomponent Reactions of Pyridines To Give Ring‐Fused Pyridiniums: In Situ Activation Strategy Using 1,2‐Dichloroethane as a Vinyl Equivalent

Reported herein is a rhodium(III)‐catalyzed three‐component annulation reaction of simple pyridines, alkynes, and 1,2‐dichloroethane (DCE), affording a streamlined pathway to diverse ring‐fused pyridiniums. DCE not only serves as a vinyl equivalent but also as an in situ activating agent for pyridine C2?H activation. A cationic five‐membered rhodacycle complex has been isolated and proposed as a possible intermediate. This strategy can be extended to other N‐containing heteroarenes for the synthesis of multiring‐fused pyridiniums. These multicomponent reactions exhibit excellent regioselectivity for 1,3‐diynes, paving a path to the cascade cyclization of 3‐fluoropyridine or N‐methylpyridin‐3‐amine with 1,3‐diynes for the construction of brand‐new tricyclic‐fused pyrano‐ or hydropyridoquinolizinium salts. These ionic fluorophores have been investigated as potential biomarkers.     

Copper‐catalyzed Synthesis of N‐alkylated 2‐(4‐substituted‐1H‐1,2,3‐triazol‐1‐yl)‐1H‐indole‐3‐carbaldehyde by Step‐wise and One‐pot Three‐component Huisgen's 1,3‐dipolar Cycloaddition Reaction

An efficient method for the synthesis of N‐alkylated 2‐(4‐substituted‐1H‐1,2,3‐triazol‐1‐yl)‐1H‐indole‐3‐carbaldehyde has been developed starting from oxindole and indole using Huisgen's 1,3‐dipolar cycloaddition reaction of organic azides to alkynes. The effect of catalysts and solvent on these reactions has been investigated. Among all these conditions, while using CuSO₄·5H₂O, DMF was found to be the best system for this reaction. It could also be prepared in a one‐pot three‐component manner by treating equimolar quantities of halides, azides, and alkynes. The Huisgen's 1,3‐dipolar cycloaddition reaction was performed using CuSO₄·5H₂O in DMF with easy work‐up procedure.     

One‐Pot,Three‐Component Synthesis of 1‐(2‐Hydroxyethyl)‐1H‐1,2,3‐triazole Derivatives by Copper‐Catalyzed 1,3‐Dipolar Cycloaddition of 2‐Azido Alcohols and Terminal Alkynes under Mild Conditions in Water

A safe, efficient, and improved procedure for the regioselective synthesis of 1‐(2‐hydroxyethyl)‐1H‐1,2,3‐triazole derivatives under ambient conditions is described. Terminal alkynes reacted with oxiranes and NaN₃ in the presence of a copper(I) catalyst, which is prepared by in situ reduction of the copper(II) complex 4 with ascorbic acid, in H₂O. The regioselective reactions exclusively gave the corresponding 1,4‐disubstituted 1H‐1,2,3‐triazoles in good to excellent yields. This procedure avoids the handling of organic azides as they are generated in situ, making this already powerful click process even more user‐friendly and safe. The remarkable features of this protocol are high yields, very short reaction times, a cleaner reaction profile in an environmentally benign solvent (H₂O), its straightforwardness, and the use of nontoxic catalysts. Furthermore, the catalyst could be recovered and recycled by simple filtration of the reaction mixture and reused for ten consecutive trials without significant loss of catalytic activity. No metal‐complex leaching was observed after the consecutive catalytic reactions.     

Nucleosides and Oligonucleotides with Diynyl Side Chains: Base Pairing and Functionalization of 2′‐Deoxyuridine Derivatives by the Copper(I)‐Catalyzed Alkyne?Azide ‘Click’ Cycloaddition

Oligonucleotides containing the 5‐substituted 2′‐deoxyuridines 1b or 1d bearing side chains with terminal C?C bonds are described, and their duplex stability is compared with oligonucleotides containing the 5‐alkynyl compounds 1a or 1c with only one nonterminal C?C bond in the side chain. For this, 5‐iodo‐2′‐deoxyuridine ( 3 ) and diynes or alkynes were employed as starting materials in the Sonogashira cross‐coupling reaction (Scheme 1). Phosphoramidites 2b – d were prepared (Scheme 3) and used as building blocks in solid‐phase synthesis. T_m Measurements demonstrated that DNA duplexes containing the octa‐1,7‐diynyl side chain or a diprop‐2‐ynyl ether residue, i.e., containing 1b or 1d , are more stable than those containing only one triple bond, i.e., 1a or 1c (Table 3). The diyne‐modified nucleosides were employed in further functionalization reactions by using the protocol of the Cu^I‐catalyzed Huisgen–Meldal–Sharpless [2+3] cycloaddition (‘click chemistry’) (Scheme 2). An aliphatic azide, i. e., 3′‐azido‐3′‐deoxythymidine (AZT; 4 ), as well as the aromatic azido compound 5 were linked to the terminal alkyne group resulting in 1H‐1,2,3‐triazole‐modified derivatives 6 and 7 , respectively (Scheme 2), of which 6 forms a stable duplex DNA (Table 3). The Husigen–Meldal–Sharpless cycloaddition was also performed with oligonucleotides (Schemes 4 and 5).     

Copper‐Free Sonogashira Coupling of Acid Chlorides with Terminal Alkynes in the Presence of a Reusable Palladium Catalyst: An Improved Synthesis of 3‐Iodochromenones (=3‐Iodo‐4H‐1‐benzopyran‐4‐ones)

Pd/C is used as an efficient catalyst for the copper‐free Sonogashira coupling of acid chlorides and terminal alkynes to afford ynones in high yields (Tables 1 and 3). Cyclization of (2‐methoxyaryl)‐substituted ynones induced by I₂/ammonium cerium(IV) nitrate (CAN) at room temperature gave 3‐iodochromenones (=3‐iodo‐4H‐1‐benzopyran‐4‐ones) in excellent yield (Table 4).