Synthesis of Self‐Threading Bithiophenes and their Structure–Property Relationships Regarding Cyclic Side‐Chains with Atomic Precision

We have recently reported a self‐threading polythiophene as a new family of insulated molecular wires. Herein, we focused on the structure–property relationships of the unique three‐dimensional architecture of the monomer. We have synthesized nine self‐threading bithiophene monomers that have cyclic side‐chains of different size and flexibility: i.e., 21‐, 22‐, 23‐, 24‐, 26‐, and 30‐membered rings composed of paraffinic, olefinic, or alkynic chains. To investigate their structure–property relationships, ¹H NMR spectroscopy, UV absorption, and fluorescence spectroscopy measurements were conducted. We found that cyclic side‐chains define the movable range of the dihedral angle of the bithiophene backbone, thereby affecting its photophysical properties. Therefore, the ability to design a structure with atomic precision as described herein would lead to the fine‐tuning of the electronic properties of insulated molecular wires.     

3,4,5‐Trinitropyrazole‐Based Energetic Salts

High‐density energetic salts that are comprised of nitrogen‐rich cations and the 3,4,5‐trinitropyrazolate anion were synthesized in high yield by neutralization or metathesis reactions. The resulting salts were fully characterized by ¹H, ¹³C NMR, and IR spectroscopy; differential scanning calorimetry; and elemental analysis. Additionally, the structures of the 3,5‐diaminotriazolium and triaminoguanidinium 3,4,5‐trinitropyrazolates were confirmed by single‐crystal X‐ray diffraction. Based on the measured densities and calculated heats of formation, the detonation performances (pressure: 23.74–31.89 GPa; velocity: 7586–8543 ms^?1; Cheetah 5.0) of the 3,4,5‐trinitropyrazolate salts are comparable with 1,3,5‐triamino‐2,4,6‐trinitrobenzene (TATB; 31.15 GPa and 8114 ms^?1). Impact sensitivities were determined to be no less than 35 J by hammer tests, which places these salts in the insensitive class.     

Structure‐Property Optimizations in Donor Polymers via Electronics,Substituents, and Side Chains Toward High Efficiency Solar Cells

Many advances in organic photovoltaic efficiency are not yet fully understood and new insight into structure‐property relationships is required to push this technology into broad commercial use. The aim of this article is not to comprehensively review recent work, but to provide commentary on recent successes and forecast where researchers should look to enhance the efficiency of photovoltaics. By lowering the LUMO level, utilizing electron‐withdrawing substituents advantageously, and employing appropriate side chains on donor polymers, researchers can elucidate further aspects of polymer‐PCBM interactions while ultimately developing materials that will push past 10% efficiency.     

N‐Substituted Azacalixphyrins: Synthesis,Properties, and Self‐Assembly

Pre‐ and postintroduction of substituents with respect to the macrocyclization step leads to previously unknown N‐substituted azacalixphyrins. The stepwise synthetic approach has been studied in detail to highlight the key role of the N‐substituents of the precursors and/or intermediates in terms of reactivity. Based on a combined experimental and theoretical investigation, the relationship between the properties of the macrocycles and their degree of substitution is rationalized. Depending on the nature of the N‐substituents, the formation of supramolecular ribbon‐like structures could also be observed, as demonstrated by combined TEM, SEM, AFM, and FTIR experiments.     

Highly Emissive Diborylphenylene‐Containing Bis(phenylethynyl)benzenes: Structure–Photophysical Property Correlations and Fluoride Ion Sensing

A series of 2,5‐bis(dimesitylboryl)‐1,4‐bis(arylethynyl)benzenes 1 – 6 that contain various p‐substituents on the terminal benzene rings, including NPh₂ ( 1 ), OMe ( 2 ), Me ( 3 ), H ( 4 ), CF₃ ( 5 ), and CN ( 6 ) groups, were synthesized, and the effects of the p‐substituents on the absorption and fluorescence properties were investigated both in solution and in the solid state. Linear relationships were obtained not only between the Hammett σ_p⁺ constants of the p‐substituents and the absorption and fluorescence maxima, quantum yields, and excited‐state dynamics parameters in solution, but also between the σ_p⁺ constants and the fluorescence quantum yields in the solid state. An important finding extracted from these results is that the suppressed fluorescence quenching in the solid state is a common feature for the present laterally boryl‐substituted π‐conjugated skeletons. Hence, the diborylphenylene can serve as a useful core unit to develop highly emissive organic solids. In fact, most of the derivatives showed more intense emission in the solid state than in solution. In addition to these studies, the titration experiment of 1 by the addition of nBu₄NF was conducted, which showed the stepwise bindings of two fluoride ions with high association constants as well as a drastic change in the fluorescence spectra, while constantly maintaining high quantum yields (0.61–0.76), irrespective of the binding modes. This result also demonstrated the potential utility of the present molecules as an efficient fluorescent fluoride ion sensor.     

A 1,3‐Capped Calix[4] Conjugate Possessing an Amine Moiety as an Anion Receptor: Reversible Anion Sensing Detected by Spectroscopy and Characterization of the Supramolecular Features by Microscopy

A phenylenediamine‐capped conjugate of calix[4]arene ( L_amino ) was synthesized by reducing its precursor, L_imino , with sodium borohydride in methanol. The L_amino sample binds to anions due to the more flexible and bent conformation of the capped aminophenolic binding core, compared to the precursor L_imino . The L_amino sample showed selectivity towards H₂PO₄^? by exhibiting a ratiometric increase in emission by about 11‐fold with a detection limit of (1.2±0.2) μm ((116±20) ppb) over 15 anions studied, including other phosphates, such as P₂O₇^4?, adenosine monophosphate (AMP^2?), adenosine diphosphate (ADP^2?), and adenosine triphosphate (ATP^2?). The L_amino sample shows an increase in the absorbance at λ=315 nm in the presence of H₂PO₄^?, CO₃^2?, HCO₃^?, CH₃CO₂^?, and F^?. The ¹H NMR spectroscopic titration of L_amino with H₂PO₄^?, F^?, and CH₃CO₂^? showed major changes in the phenylene‐capped and salicyl moieties, and thereby, confirming the aminophenolic region as the binding core. However, the binding strength of these anions followed the trend H₂PO₄^?>F^??CH₃CO₂^?>HSO₄^?. The heat changes observed by isothermal titration calorimetry support this trend. The L_amino sample showed reversible sensing towards H₂PO₄^? and F^? in the presence of Mg²⁺ and Ca²⁺, respectively. NOESY studies of L_amino , in comparison with its anionic complexes, revealed that major conformational changes occurred in the capping region to facilitate the binding of anion. ESI‐MS and the Job's method revealed 1:1 stoichiometry between L_amino and H₂PO₄^? or F^?. In the SEM micrographs of L_amino , the spherical particles are converted into spherical aggregates and further form large agglomerates and even branched sheets in the presence of anions, depending upon their binding strength.     

Electrochemical Properties of Substituted 2‐Methyl‐1,4‐Naphthoquinones: Redox Behavior Predictions

In the context of the investigation of drug‐induced oxidative stress in parasitic cells, electrochemical properties of a focused library of polysubstituted menadione derivatives were studied by cyclic voltammetry. These values were used, together with compatible measurements from literature (quinones and related compounds), to build and evaluate a predictive structure–redox potential model (quantitative structure–property relationship, QSPR). Able to provide an online evaluation (through Web interface) of the oxidant character of quinones, the model is aimed to help chemists targeting their synthetic efforts towards analogues of desired redox properties     

Distance‐Dependent Attractive and Repulsive Interactions of Bulky Alkyl Groups

The stabilizing and destabilizing effects of alkyl groups on an aromatic stacking interaction were experimentally measured in solution. The size (Me, Et, iPr, and tBu) and position (meta and para) of the alkyl groups were varied in a molecular balance model system designed to measure the strength of an intramolecular aromatic interaction. Opposite stability trends were observed for alkyl substituents at different positions on the aromatic rings. At the closer meta‐position, smaller groups were stabilizing and larger groups were destabilizing. Conversely, at the farther para‐position, the larger alkyl groups were systematically more stabilizing with the bulky tBu group forming the strongest stabilizing interaction. X‐ray crystal structures showed that the stabilizing interactions of the small meta‐alkyl and large para‐alkyl groups were due to their similar distances and van der Waals contact areas with the edge of opposing aromatic ring.     

A Convenient Approach To Synthesize o‐Carborane‐Functionalized Phosphorescent Iridium(III) Complexes for Endocellular Hypoxia Imaging

The structure–property relationship of carborane‐modified iridium(III) complexes was investigated. Firstly, an efficient approach for the synthesis of o‐carborane‐containing pyridine ligands a – f in high yields was developed by utilizing stable and cheap B₁₀H₁₀(Et₄N)₂ as the starting material. By using these ligands, iridium(III) complexes I – VII were efficiently prepared. In combination with DFT calculations, the photophysical and electrochemical properties of these complexes were studied. The hydrophilic nido‐o‐carborane‐based iridium(III) complex VII showed the highest phosphorescence efficiency (abs. =0.48) among known water‐soluble homoleptic cyclometalated iridium(III) complexes and long emission lifetime (τ=1.24 μs) in aqueous solution. Both of them are sensitive to O₂, and thus endocellular hypoxia imaging of complex VII was realized by time‐resolved luminescence imaging (TRLI). This is the first example of applying TRLI in endocellular oxygen detection with a water‐soluble nido‐carborane functionalized iridium(III) complex.     

Highly Efficient Chirality Transfer from Diamines Encapsulated within a Self‐Assembled Calixarene–Salen Host

A calix[4]arene host equipped with two bis‐[Zn(salphen)] complexes self‐assembles into a capsular complex in the presence of a chiral diamine guest with an unexpected 2:1 ratio between the host and the guest. Effective chirality transfer from the diamine to the calix–salen hybrid host is observed by circular dichroism (CD) spectroscopy, and a high stability constant K_2,1 of 1.59×10¹¹ M ^?2 for the assembled host–guest ensemble has been determined with a substantial cooperativity factor α of 6.4. Density functional calculations are used to investigate the origin of the stability of the host–guest system and the experimental CD spectrum compared with those calculated for both possible diastereoisomers showing that the M,M isomer is the one that is preferentially formed. The current system holds promise for the chirality determination of diamines, as evidenced by the investigated substrate scope and the linear relationship between the ee of the diamine and the amplitude of the observed Cotton effects.     

Tetraphenylethene‐Based Conjugated Fluoranthene: A Potential Fluorescent Probe for Detection of Nitroaromatic Compounds

This study reports the synthesis and photophysical properties of a star‐shaped, novel, fluoranthene–tetraphenylethene (TFPE) conjugated luminogen, which exhibits aggregation‐induced blue‐shifted emission (AIBSE). The bulky fluoranthene units at the periphery prevent intramolecular rotation (IMR) of phenyl rings and induces a blueshift with enhanced emission. The AIBSE phenomenon was investigated by solvatochromic and temperature‐dependent emission studies. Nanoaggregates of TFPE, formed by varying the water/THF ratio, were investigated by SEM and TEM and correlated with optical properties. The TFPE conjugate was found to be a promising fluorescent probe towards the detection of nitroaromatic compounds (NACs), especially for 2,4,6‐trinitrophenol (PA) with high sensitivity and a high Stern–Volmer quenching constant. The study reveals that nanoaggregates of TFPE formed at 30 and 70 % water in THF showed unprecedented sensitivity with detection limits of 0.8 and 0.5 ppb, respectively. The nanoaggregates formed at water fractions of 30 and 70 % exhibit high Stern–Volmer constants (K_sv=79 998 and 51 120 m ^?1, respectively) towards PA. Fluorescence quenching is ascribed to photoinduced electron transfer between TFPE and NACs with a static quenching mechanism. Test strips coated with TFPE luminogen demonstrate fast and ultra‐low‐level detection of PA for real‐time field analysis.     

Solvation Accounts for the Counterintuitive Nucleophilicity Ordering of Peroxide Anions

The nucleophilic reactivities (N , s _N) of peroxide anions (generated from aromatic and aliphatic peroxy acids or alkyl hydroperoxides) were investigated by following the kinetics of their reactions with a series of benzhydrylium ions (Ar₂CH⁺) in alkaline aqueous solutions at 20 °C. The second‐order rate constants revealed that deprotonated peroxy acids (RCO₃⁻), although they are the considerably weaker Brønsted bases, react much faster than anions of aliphatic hydroperoxides (ROO⁻). Substitution of the rate constants of their reactions with benzhydrylium ions into the linear free energy relationship lg k =s _N(N +E ) furnished nucleophilicity parameters (N , s _N) of peroxide anions, which were successfully applied to predict the rates of Weitz–Scheffer epoxidations. DFT calculations with inclusion of solvent effects by means of the Integral Equation Formalism version of the Polarizable Continuum Model were performed to rationalize the observed reactivities.     

Chondroitin Sulfate Tetrasaccharides: Synthesis,Three‐Dimensional Structure and Interaction with Midkine

The biological activity of midkine, a cytokine implicated in neuro‐ and tumourigenesis, is regulated by its binding to glycosaminoglycans (GAGs), such as heparin and chondroitin sulfate (CS). To better understand the molecular recognition of GAG sequences by this growth factor, the interactions between synthetic chondroitin sulfate‐like tetrasaccharides and midkine were studied by using different techniques. Firstly, a synthetic approach for the preparation of CS‐like oligosaccharides in the sequence GalNAc–GlcA was developed. A fluorescence polarisation competition assay was then employed to analyse the relative binding affinities of the synthetic compounds and revealed that midkine interacted with CS‐like tetrasaccharides in the micromolar range. The 3D structure of these tetramers was studied in detail by a combination of NMR spectroscopy experiments and molecular dynamics simulations. Saturation transfer difference (STD) NMR spectroscopy experiments indicate that the CS tetrasaccharides bind to midkine in an extended conformation, with similar saturation effects along the entire sugar chain. These results are compatible with docking studies that suggest an interaction of the tetrasaccharide with midkine in a folded structure. Overall, this study provides valuable information on the interaction between midkine and well‐defined, chemically synthesised CS oligosaccharides and these data can be useful for the design of more active compounds that modulate the biological function of this protein.     

Protonation‐Dependent Base Flipping at Neutral pH in the Catalytic Triad of a Self‐Splicing Bacterial Group II Intron

NMR spectroscopy has revealed pH‐dependent structural changes in the highly conserved catalytic domain 5 of a bacterial group II intron. Two adenines with pK_a values close to neutral pH were identified in the catalytic triad and the bulge. Protonation of the adenine opposite to the catalytic triad is stabilized within a G(syn)–AH⁺(anti) base pair. The pH‐dependent anti‐to‐syn flipping of this G in the catalytic triad modulates the known interaction with the linker region between domains 2 and 3 (J23) and simultaneously the binding of the catalytic Mg²⁺ ion to its backbone. Hence, this here identified shifted pK_a value controls the conformational change between the two steps of splicing.     

An Optimised Small‐Molecule Stabiliser of the 14‐3‐3–PMA2 Protein–Protein Interaction

Modulation of protein–protein interactions (PPIs) is a highly demanding, but also a very promising approach in chemical biology and targeted drug discovery. In contrast to inhibiting PPIs with small, chemically tractable molecules, stabilisation of these interactions can only be achieved with complex natural products, like rapamycin, FK506, taxol, forskolin, brefeldin and fusicoccin. Fusicoccin stabilises the activatory complex of the plant H⁺‐ATPase PMA2 and 14‐3‐3 proteins. Recently, we have shown that the stabilising effect of fusicoccin could be mimicked by a trisubstituted pyrrolinone (pyrrolidone1, 1 ). Here, we report the synthesis, functional activity and crystal structure of derivatives of 1 that stabilise the 14‐3‐3–PMA2 complex. With a limited compound collection three modifications that are important for activity enhancement could be determined: 1) conversion of the pyrrolinone scaffold into a pyrazole, 2) introduction of a tetrazole moiety to the phenyl ring that contacts PMA2, and 3) addition of a bromine to the phenyl ring that exclusively contacts the 14‐3‐3 protein. The crystal structure of a pyrazole derivative of 1 in complex with 14‐3‐3 and PMA2 revealed that the more rigid core of this molecule positions the stabiliser deeper into the rim of the interface, enlarging especially the contact surface to PMA2. Combination of the aforementioned features gave rise to a molecule ( 37 ) that displays a threefold increase in stabilising the 14‐3‐3–PMA2 complex over 1 . Compound 37 and the other active derivatives show no effect on two other important 14‐3‐3 protein–protein interactions, that is, with CRaf and p53. This is the first study that describes the successful optimisation of a PPI stabiliser identified by screening.     

Benzo[2,1‐b;3,4‐b′]dithiophene‐based low‐bandgap polymers for photovoltaic applications

The synthesis of four alternating copolymers using benzo[2,1‐b;3,4‐b′]dithiophene (BDP) as the common donor unit is presented. Before the synthesis, theoretical calculations that we performed predicted that the incorporation of BDP, which consists of fused dithiophene units with a benzene ring, into these polymers would produce a low‐lying highest occupied molecular orbital (HOMO) energy level. Low‐lying HOMO levels are desirable to produce high open circuit voltages (V_OC) in organic bulk heterojunction (BHJ) photovoltaic devices. The polymers' structural characterization, as well as the preliminary results of their performance in BHJ devices, using (6,6)‐phenyl C₆₁‐butyric acid methyl ester as the electron acceptor, is presented. The V_OC values follow the expected trend: increasing with decreasing HOMO level of the polymer. High V_OC values of 0.81 and 0.82 V have been obtained from two polymers: PBDPBT and PBDPDPP. The initial power conversion efficiency achieved in these unoptimized devices was 1.11% because of relatively low J_SC values. The variation observed in the J_SC values between the four polymers is discussed. Device performance is expected to increase with optimization of processing conditions for the devices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Soluble polyimides containing 1,4:3,6‐dianhydro‐d‐glucidol and fluorinated units: Preparation,characterization, optical,and dielectric properties

Aiming to develop soluble and colorless polyimides, two novel diamines, 2,5‐bis(2‐trifluoromethyl‐4‐amino‐phenoxy)‐1,4:3,6‐dianhydrosorbitol (2a) and 2,5‐bis(2‐methyl‐4‐amino‐phenoxy)‐1,4:3,6‐dianhydrosorbitol (2b), were designed and synthesized by the reduction of corresponding dinitro monomer which was obtained via solvent‐free melt heating method. Polyimides (PI–(1–5)) containing 1,4:3,6‐dianhydro‐d ‐glucidol fragments were prepared from 2a and five kinds of common dianhydrides and PI–6 was synthesized from 2b and 4,4′‐(hexafluoroisopropylidene)‐diphthalic anhydride (6FDA) via a two‐step thermal imidization. All the polyimides were readily soluble in common polar solvents and could afford flexible, tough, and transparent films with transparency as high as 87% at 450 nm. Meanwhile, PI–(1–6) exhibited unexpectedly low dielectric constants of 2.02–2.52 at 1 MHz. In addition, analogs PI–7 derived from 2,5‐bis(4‐amino‐phenoxy)‐1,4:3,6‐dianhydrosorbitol (2c) and 6FDA and PI–8 derived from 4,4′‐bis(4‐amino‐2‐trifluoromethylphenoxy)biphenyl (2d) and 6FDA were also obtained via a two‐step thermal imidization for comparision with PI–(1–6) on aspects of thermal, mechnical, optical, electrical, and morphological properties. The structure–property relationships of PI–(1–8) were discussed in detail. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3253–3265