Asymmetric Reduction of 2‐Chloro‐3‐oxo Esters by Transfer Hydrogenation

Asymmetric reduction of 2‐chloro‐3‐oxo esters was achieved by catalytic transfer hydrogenation using [RuCl₂(p‐cymene)](S,S)‐TsDPEN as the chiral catalyst and HCOOH‐Et₃N as the hydrogen source. Moderate to good yields (up to 85%) and good enantioselectivities (up to 98% ee) were obtained.     

Synthesis and Spectroscopic Characterisation of 2,3‐Epoxy/ 3‐Chloro‐2‐hydroxy Propyl Derivatives of Quaternary Ammonium Salts:Useful Cationic Fixing Agents

Eight mono-reactive and four bis-reactive 2,3-epoxy/3-chloro-2-hydroxy propyl derivatives of quaternary ammonium salts have been synthesised by reacting epichlorohydrin with suitable tertiary amines and diamines. Mono-reactive derivatives also contain cyano and carboxylic groups in addition to 2,3-epoxy/3-chloro-2-hydroxy propyl groups. The structures of these quaternary ammonium salts have been characterised using IR and ¹H NMR spectroscopic techniques. These quaternary ammonium chlorides have been applied to the cotton fabrics as pretreatments and aftertreatments and promising results have been obtained.     

Trans‐3,5‐dihydroperoxy‐3,5‐dimethyl‐1,2‐dioxalane/HBr System as New,Effective, Mild and Non‐toxic Reagent for Synthesis of 2‐Aryl‐1H‐benzothiazoles and 2‐Aryl‐1‐arylmethyl‐1H‐benzimidazoles

Ttrans‐3,5‐dihydroperoxy‐3,5‐dimethyl‐1,2‐dioxalane has been used as new, effective, solid, inexpensive and nontoxic oxidant for in situ generation of Br⁺ from HBr. This system has been applied as catalyst for synthesis of 2‐aryl‐1H‐benzothiazoles and 2‐aryl‐1‐arylmethyl‐1H‐benzimidazoles at room temperature in excellent yields and high purity.     

Kinetics of chemical oxidative dispersion polymerization of 3,5‐xylidine in aqueous medium using a PH stat method

Kinetics of chemical oxidative dispersion polymerization of 3,5‐xylidine (Xy) in aqueous medium with ammonium persulfate (APS) as an oxidant was studied by monitoring the amount of proton released from Xy monomer, which was obtained from the amount of potassium hydroxide (KOH) solution added to keep constant pH values using a pH stat. The initial polymerization rate (R) [mol/L/min] of Xy was expressed as follows: R = 1.65 (1 − α) [Xy] [APS], where α is the degree of ionization of Xy, and [Xy] and [APS] are concentrations of Xy and APS, respectively. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4238–4246, 2000     

A density functional theory study on diazotization and nitration of 3,5‐diamino‐1,2,4‐triazole

The reaction mechanism, thermodynamic and kinetic properties for diazotization and nitration of 3,5‐diamino‐1,2,4‐triazole were studied by a density functional theory. The geometries of the reactants, transition states, and intermediates were optimized at the B3LYP/6‐31G (d, p) level. Vibrational analysis was carried out to confirm the transition state structures, and the intrinsic reaction coordinate (IRC) method was used to explore the minimum energy path. The single‐point energies of all stagnation points were further calculated at the B3LYP (MP2)/6‐311+G (2d, p) level. The statistical thermodynamic method and Eyring transition state theory with Wigner correction were used to study the thermodynamic and kinetic characters of all reactions within 0–25°C. Two reaction channels are computed, including the diazotization and nitration of 3‐NH₂ or 5‐NH₂, and there are six steps in each channel. The reaction rate in each step is increased with temperature. The last step in each channel is the slowest step. The first, second, and fifth steps are exothermic reactions, and are favored at lower temperature in the thermodynamics. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Regioselective Synthesis of 6‐[Chloro(difluoro)methyl]salicylates by [3+3] Cyclocondensations of 1,3‐Bis(trimethylsilyloxy)buta‐1,3‐dienes with 1‐Chloro‐1,1‐difluoro‐4‐(trimethylsilyloxy)pent‐3‐en‐2‐one

The TiCl₄‐mediated [3+3] cyclocondensation of various 1,3‐bis(trimethylsilyloxy)buta‐1,3‐dienes with 1‐chloro‐1,1‐difluoro‐4‐(trimethylsilyloxy)pent‐3‐en‐2‐one provides a regioselective access to novel 6‐(chlorodifluoromethyl)salicylates (=6‐(chlorodifluoromethyl)‐2‐hydroxybenzoates) with very good regioselectivity. For selected products, it was demonstrated that the CF₂Cl group can be transformed to CF₂H and CF₂(Allyl) by free‐radical reactions.     

InI3‐ or ZnI2‐Catalyzed Reaction of Hydroxylated 1,5‐Allenynes with Thiols: A New Access to 3,5‐Disubstituted Toluene Derivatives

Transition‐metal‐activated alkynes or allenes can accept nucleophilic attack and undergo direct addition of the nucleophiles to the unsaturated bonds or trigger subsequent rearrangement reactions. This chemistry has witnessed increasing development in recent years. In this report, we have focused on the metal‐catalyzed reactions of a variety of substituted propargyl allenic alcohols and thiophenols using indium(III) and zinc(II) catalysts, which can activate both the alcohol and alkyne. In this reaction, thio groups play the role of a nucleophile and trigger subsequent rearrangements to give benzene derivatives. The products can be further transformed into various 1,3,5‐trisubstituted aromatic compounds by nickel‐catalyzed coupling reactions through the cleavage of the C? S bonds.     

Kinetics and Mechanism of Oxidation of 1‐Methoxy‐2‐propanol and 1‐Ethoxy‐2‐propanol by Ditelluratocuprate(III) in Alkaline Medium

The kinetics of oxidation of 1‐methoxy‐2‐propanol and 1‐ethoxy‐2‐propanol by ditelluratocuprate(III) (DTC) in alkaline liquids has been studied spectrophotometrically in the temperature range of 293.2–313.2 K. The reaction rate showed first order dependence in DTC and fractional order with respect to 1‐methoxy‐2‐propanol or 1‐ethoxy‐2‐propanol. It was found that the pseudo‐first order rate constant k_obs increased with an increase in concentration of OH^? and a decrease in concentration of TeO₄^2?. There is a negative salt effect. A plausible mechanism involving a pre‐equilibrium of a adduct formation between the complex and 1‐methoxy‐2‐propanol or 1‐ethoxy‐2‐propanol was proposed. The rate equations derived from mechanism can explain all experimental observations. The activation parameters along with the rate constants of the rate‐determining step were calculated.     

A Convenient Synthesis of 2,3‐Dihydro‐4H‐thiopyrano[2,3‐b]‐, ‐[2,3‐c]‐, or ‐[3,2‐c]pyridin‐4‐ones by the Reaction of the Corresponding 1‐(Chloropyridinyl)alk‐2‐en‐1‐ones with NaSH

2,3‐Dihydro‐4H‐thiopyrano[2,3‐b]pyridin‐4‐ones 4 were prepared by a three‐step sequence from commercially available 2‐chloropyridine ( 1 ). Thus, successive treatment of 1 with ⁱPr₂NLi (LDA) and α,β‐unsaturated aldehydes gave 1‐(2‐chloropyridin‐3‐yl)alk‐2‐en‐1‐ols 2 , which were oxidized with MnO₂ to 1‐(2‐chloropyridin‐3‐yl)alk‐2‐en‐1‐ones 3 . The reactions of 3 with NaSH?n H₂O proceeded smoothly at 0° in DMF to provide the desired thiopyranopyridinones. Similarly, 2,3‐dihydro‐4H‐thiopyrano[2,3‐c]pyridin‐4‐ones 8 and 2,3‐dihydro‐4H‐thiopyrano[3,2‐c]pyridin‐4‐ones 12 were obtained starting from 3‐chloropyridine ( 5 ) and 4‐chloropyridine ( 9 ), respectively.     

A New Solution—phase Parallel Synthesis of 2—Alkyamino—3—aryl—5—phenylmethylene—3,5—dihydro—4H—imidazol—4—ones

Thirteen new 2-alkylaminoimidazolones(4) wre rapidly synthesized by a new solution-phase parallel synthetic method,which includes aza-Wittig reaction of iminophosphorane(1) with aromatic isocyanate to give carbodi-imide(2) and subsequent reaction of 2 with various aliphatic primary amine in a parallel fashion.The products were confirmed by ^1H NMR,MS,IR and X-ray crystallographic analysis.The unusual selectivity of the cyclization was probably due to the deometry of the guanidine intermediate.     

Density Functional Theory Studies on Intermolecular Interactions of 4‐Amino‐3,5‐dinitropyrazole with NH3 and H2O

Density functional theory (DFT) method with 6‐311++G** basis set was applied to study intermolecular interactions of 4‐amino‐3,5‐dinitropyrazole (LLM‐116)/NH₃ and LLM‐116/H₂O supermolecules. Four optimized stable supermolecules were found on the potential energy surface. The intermolecular interaction energy was calculated with basis set superposition error (BSSE) correction and zero point energy (ZPE) correction. The greatest corrected intermolecular interaction energies of LLM‐116/NH₃ and LLM‐116/H₂O supermolecules are –42.75 and –19.09 kJ×mol^‐1 respectively, indicating that the intensity of interaction between LLM‐116 and NH₃ is stronger than that of LLM‐116/H₂O. The intermolecular interaction is an exothermic process accompanied by a decrease in the probability of supermolecules formation, and the interactions become weak as temperature increase. Natural bond orbital (NBO) analysis was performed to reveal the origin of interaction. The IR spectra were obtained and assigned by vibrational analysis. Based on vibrational analysis, the changes of thermodynamic properties from LLM‐116 to supermolecules with temperature ranging from 200.0 to 400.0 K were obtained using statistical thermodynamic method.     

Facile Synthesis of Substituted Ethyl 2‐(Chloromethyl)‐2‐hydroxy‐2H‐1‐benzopyran‐3‐carboxylates

Ethyl 2‐(chloromethyl)‐2‐hydroxy‐2H‐chromene‐3‐carboxylates 2a – 2j have been synthesized by reaction of substituted salicylaldehydes with ethyl 4‐chloro‐3‐oxobutanoate, in the presence of piperidine in CH₂Cl₂ at room temperature, in good yields.     

Study on the Color Reaction of Silver with 2‐(2‐Quinolylazo)‐5‐Dimethylaminoaniline and its Application

A new chromogenic reagent, 2‐(2‐quinolylazo)‐5‐dimethylaminoaniline (QADMAA) was synthesized. A highly sensitive, selective and rapid method for the determination of silver based on the rapid reaction of silver(I) with QADMAA was developed. In the presence of pH = 6.5 sodium citrate‐sodium hydroxide buffer solution and sodium dodecyl sulfonate (SDS) medium, QADMAA reacts with silver to form a violet complex of a molar ratio 1:2 (silver to QADMAA). The molar absorptivity of the complex is 1.26 × 10⁵ L. mol^?1.cm^?1 at 570 nm. Beer's law is obeyed in the range of 0.01–0.6 μg/mL. The relative standard deviation for eleven replicate samples of 0.2 μg/mL silver is 1.76%. This method was applied to the determination of silver in water with good results.     

Unexpected Spiroproducts from the Reaction of N‐Benzoylglycine with Ortho‐Formylbenzoic Acids −3,5′‐Dioxo‐2′‐Phenyl‐1,3‐Dihydrospiro[Indene‐2,4′‐[1,3]Oxazol]‐1‐yl Acetates: Establishments of Their Structure

This paper describes a method of preparation of new 3,5′‐dioxo‐2′‐phenyl‐1,3‐dihydrospiro[indene‐2,4′‐[1,3]oxazol]‐1‐yl acetate and its 5‐chloro‐ and bromoderivatives as products of interaction of N‐benzoylglycine (hippuric acid) with corresponding ortho‐formylbenzoic acids. The reaction carried out in acetic anhydride media in the presence of piperidine as catalyst. The novel spirocompounds were purified by column chromatography from multicomponent reaction mixtures. The composition of the spiro‐products was confirmed by C, H, N element analysis. The structure was established by IR, MS, ¹H‐ and ¹³C‐NMR analysis including COSY ¹H‐¹³C experiments.     

3,5‐Dihydro‐2H‐thieno[2,3‐c]pyrrole 1,1‐Dioxide – A New Simple Pyrrole Unit. Preliminary Communication

2,3‐Dihydrothiophene 1,1‐dioxide (‘2‐sulfolene’) reacted with tosylmethyl isocyanide (TsMIC) in the presence of a base to give the hitherto unknown 3,5‐dihydro‐2H‐thieno[2,3‐c]pyrrole 1,1‐dioxide (‘β′‐sulfolenopyrrole’) from the expected cyclocondensation. A serendipitous formation of this β′‐sulfolenopyrrole was found earlier, when we investigated synthetic routes to a 3,5‐dihydro‐1H‐thieno[3,4‐c]pyrrole 2,2‐dioxide (a ‘β″‐sulfolenopyrrole’) from TsMIC and 2,5‐dihydrothiophene 1,1‐dioxide (‘3‐sulfolene’). Here, we present the synthesis and characterization of β′‐sulfolenopyrrole. The X‐ray crystal‐structure analyses of β′‐sulfolenopyrrole and the isomeric β″‐sulfolenopyrrole are also reported here. This β′‐sulfolenopyrrole is a new type of a functionalized pyrrole, which is likely to be of interest for pharmaceutical purposes.     

Hyperbranched polyesters based on polycondensation of 1,3,5‐tris(2‐hydroxyethyl) cyanuric acid and 3,5‐dihydroxybenzoic acid

A series of hyperbranched polyesters was produced by the condensation of the monomer 3,5‐dihydroxybenzoic acid with 1,3,5‐tris(2‐hydroxyethyl) cyanuric acid as a trifunctional central core. The monomer‐to‐core ratio was varied between 3 and 45. The resulting polymers were phenolic‐terminated polyesters. The degree of branching of the polyesters was calculated according to the method described by Fréchet and was found to be in the range of 0.7–0.8. The number‐average molecular weights calculated via ¹H NMR spectroscopic degree‐of‐polymerization values are in reasonable agreement with the predicted values derived from the monomer‐to‐core ratio for all prepared polyesters. Thermal and photophysical properties were also studied. Glass‐transition temperatures were determined by differential scanning calorimetry and were found to be relatively independent of the theoretical molar mass. The polyesters were found to be blue emitters, and the solutions exhibited intense fluorescence, with a maximum of 430 nm. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3278–3288, 2005     

An Unexpected Result of the Reaction of Benzothioamide Derivatives with 2‐Aryl‐2‐bromoacetonitriles

Unexpectedly, in the reaction of 2‐bromo‐2‐phenylacetonitrile derivatives with 2 mol‐equiv. of benzothioamide in DMSO, 3,5‐diaryl‐1,2,4‐thiadiazoles were obtained in excellent yields (83–90%) and in short reaction times (5–10 min). It is found that, in DMF, a quite different reaction takes place and 2,5‐diaryl‐1,3‐thiazol‐4‐amines are formed as the main products.     

Synthesis and characterization of near‐monodisperse electron acceptor homopolymers of 2‐[(3,5‐dinitrobenzoyl)oxy]ethyl methacrylate

Homopolymers of 2‐(trimethylsiloxy)ethyl methacrylate of degrees of polymerization from 5 to 50 were synthesized by group transfer polymerization in tetrahydrofuran (THF) using 1‐methoxy‐1‐(trimethylsiloxy)‐2‐methyl propene as the initiator and tetrabutylammonium bibenzoate as the catalyst. These polymers were first converted to poly[2‐(hydroxy)ethyl methacrylate]s by removal of the trimethylsilyl‐protecting groups by acidic hydrolysis, and subsequently transformed to poly{2‐[(3,5‐dinitrobenzoyl)oxy]ethyl methacrylate}s by reaction with 3,5‐dinitrobenzoyl chloride in the presence of triethylamine. Gel permeation chromatography in THF and proton nuclear magnetic resonance (¹H NMR) spectroscopy in CDCl₃ and d₆ dimethyl sulfoxide were used to characterize the polymers in terms of their molecular weight and composition. The molecular weights were found to be close to the values expected from the polymerization stoichiometry and the molecular weight distributions were narrow, with polydispersity indices around 1.1. The hydrolysis and reesterification steps were found to be almost quantitative for all polymers. Differential scanning calorimetry and thermal gravimetric analysis were also employed to measure the glass transition temperatures (T_g 's) and decomposition temperatures, which were determined to be approximately 80 and 320 °C, respectively. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1457–1465, 2000     

Reaction of 2,3‐Dichloro‐1,4‐Naphthoquinone with 1‐Phenylbiguanide and 2‐Guanidinebenzimidazole

When 2,3‐dichloro‐1,4‐naphthoquinone (DCHNQ) ( 1 ) is allowed to react with 1‐phenylbiguanide (PBG) ( 2 ), 4‐chloro‐2,5‐dihydro‐2,5‐dioxonaphtho[1,2‐d]imidazole‐3‐carboxylic acid phenyl amide ( 4 ), 6‐chloro‐8‐phenylamino‐9H‐7,9,11‐triaza‐cyclohepta[a]naphthalene‐5,10‐dione ( 5 ) and 4‐dimethyl‐amino‐5,10‐dioxo‐2‐phenylimino‐5,10‐dihydro‐2H‐benzo[g]quinazoline‐1‐carboxylic acid amide ( 6 ) were obtained. While on reacting 1 with 2‐guanidinebenzimidazole (GBI) ( 3 ) the products are 3‐(1H‐benzoimidazol‐2‐yl)‐4‐chloro‐3H‐naphtho[1,2‐d]imidazole‐2,5‐dione ( 7 ) and 3‐[3‐(1H‐benzoimidazol‐2‐yl)‐ureido]‐1,4‐dioxo‐1,4‐dihydronaphthalene‐2‐carboxylic acid dimethylamide ( 8 ).