High‐Performance K–CO2 Batteries Based on Metal‐Free Carbon Electrocatalysts

Metal–CO₂ batteries have attracted much attention owing to their high energy density and use of greenhouse CO₂ waste as the energy source. However, the increasing cost of lithium and the low discharge potential of Na–CO₂ batteries create obstacles for practical applications of Li/Na–CO₂ batteries. Recently, earth‐abundant potassium ions have attracted considerable interest as fast ionic charge carriers for electrochemical energy storage. Herein, we report the first K–CO₂ battery with a carbon‐based metal‐free electrocatalyst. The battery shows a higher theoretical discharge potential (E^?=2.48 V) than that of Na–CO₂ batteries (E^?=2.35 V) and can operate for more than 250 cycles (1500 h) with a cutoff capacity of 300 mA h g^?1. Combined DFT calculations and experimental observations revealed a reaction mechanism involving the reversible formation and decomposition of P12₁/c1‐type K₂CO₃ at the efficient carbon‐based catalyst.     

High‐Power Electrochemical Energy Storage System Employing Stable Radical Pseudocapacitors

The development of electrical energy storage devices that can operate at high charge and discharge rates is fundamentally important, however although electrochemical capacitors (ECs) can charge and discharge at high rates, their electrochemical storage capacity remains an order of magnitude lower than that of conventional lithium‐ion batteries. Novel pseudocapasitors are developed, based on the stable persilyl‐susbtituted free radicals of the heavy group 14 elements, (tBu₂MeSi)₃E^. [E=Si ( 1 ), Ge ( 2 ), and Sn ( 3 )], as anode materials for energy storage system. Such systems showed a remarkable cycle stability without significant loss of power density, in comparison with similar characteristics of the known organic radical batteries, the dual carbon cell, and the electrochemical capacitor. Particularly important is that these novel electrochemical energy storage systems employing stable heavy group 14 element radicals are lithium‐free. The electrochemical properties and structures of the reduced and oxidized species were studied by the cyclic voltammetry (CV), electron paramagnetic resonance (EPR) spectroscopy, and X‐ray diffraction (XRD).     

High‐Performance Sodium‐Ion Batteries and Sodium‐Ion Pseudocapacitors Based on MoS2/Graphene Composites

Sodium‐ion energy storage, including sodium‐ion batteries (NIBs) and electrochemical capacitive storage (NICs), is considered as a promising alternative to lithium‐ion energy storage. It is an intriguing prospect, especially for large‐scale applications, owing to its low cost and abundance. MoS₂ sodiation/desodiation with Na ions is based on the conversion reaction, which is not only able to deliver higher capacity than the intercalation reaction, but can also be applied in capacitive storage owing to its typically sloping charge/discharge curves. Here, NIBs and NICs based on a graphene composite (MoS₂/G) were constructed. The enlarged d‐spacing, a contribution of the graphene matrix, and the unique properties of the MoS₂/G substantially optimize Na storage behavior, by accommodating large volume changes and facilitating fast ion diffusion. MoS₂/G exhibits a stable capacity of approximately 350 mAh g^?1 over 200 cycles at 0.25 C in half cells, and delivers a capacitance of 50 F g^?1 over 2000 cycles at 1.5 C in pseudocapacitors with a wide voltage window of 0.1–2.5 V.     

Spatially Resolved Confocal Resonant Raman Microscopic Analysis of Anode‐Grown Geobacter sulfurreducens Biofilms

When grown on the surface of an anode electrode, Geobacter sulfurreducens forms a multi‐cell thick biofilm in which all cells appear to couple the oxidation of acetate with electron transport to the anode, which serves as the terminal metabolic electron acceptor. Just how electrons are transported through such a biofilm from cells to the underlying anode surface over distances that can exceed 20 microns remains unresolved. Current evidence suggests it may occur by electron hopping through a proposed network of redox cofactors composed of immobile outer membrane and/or extracellular multi‐heme c‐type cytochromes. In the present work, we perform a spatially resolved confocal resonant Raman (CRR) microscopic analysis to investigate anode‐grown Geobacter biofilms. The results confirm the presence of an intra‐biofilm redox gradient whereby the probability that a heme is in the reduced state increases with increasing distance from the anode surface. Such a gradient is required to drive electron transport toward the anode surface by electron hopping via cytochromes. The results also indicate that at open circuit, when electrons are expected to accumulate in redox cofactors involved in electron transport due to the inability of the anode to accept electrons, nearly all c‐type cytochrome hemes detected in the biofilm are oxidized. The same outcome occurs when a comparable potential to that measured at open circuit (?0.30 V vs. SHE) is applied to the anode, whereas nearly all hemes are reduced when an exceedingly negative potential (?0.50 V vs. SHE) is applied to the anode. These results suggest that nearly all c‐type cytochrome hemes detected in the biofilm can be electrochemically accessed by the electrode, but most have oxidation potentials too negative to transport electrons originating from acetate metabolism. The results also reveal a lateral heterogeneity (x–y dimensions) in the type of c‐type cytochromes within the biofilm that may affect electron transport to the electrode.     

Poly(2,5‐dimercapto‐1,3,4‐thiadiazole) as a Cathode for Rechargeable Lithium Batteries with Dramatically Improved Performance

Organosulfur compounds with multiple thiol groups are promising for high gravimetric energy density electrochemical energy storage. We have synthesized a poly(2,5‐dimercapto‐1,3,4‐thiadiazole) (PDMcT)/poly(3,4‐ethylenedioxythiophene) (PEDOT) composite cathode for lithium‐ion batteries with a new method and investigated its electrochemical behavior by charge/discharge cycles and cyclic voltammetry (CV) in an ether‐based electrolyte. Based on a comparison of the electrochemical performance with a carbonate‐based electrolyte, we found a much higher discharge capacity, but also a very attractive cycling performance of PDMcT by using a tetra(ethylene glycol) dimethyl ether (TEGDME)‐based electrolyte. The first discharge capacity of the as‐synthesized PDMcT/PEDOT composite approached 210 mAh g^?1 in the TEGDME‐based electrolyte. CV results clearly show that the redox reactions of PDMcT are highly reversible in this TEGDME‐based electrolyte. The reversible capacity remained around 120 mAh g^?1 after 20 charge/discharge cycles. With improved cycling performance and very low cost, PDMcT could become a very promising cathode material when combined with a TEGDME‐based electrolyte. The poor capacity in the carbonate‐based electrolyte is a consequence of the irreversible reaction of the DMcT monomer and dimer with the solvent, emphasizing the importance of electrolyte chemistry when studying molecular‐based battery materials.     

Core–Shell Carbon‐Coated CuO Nanocomposites: A Highly Stable Electrode Material for Supercapacitors and Lithium‐Ion Batteries

Herein we present a simple method for fabricating core–shell mesostructured CuO@C nanocomposites by utilizing humic acid (HA) as a biomass carbon source. The electrochemical performances of CuO@C nanocomposites were evaluated as an electrode material for supercapacitors and lithium‐ion batteries. CuO@C exhibits an excellent capacitance of 207.2 F g^?1 at a current density of 1 A g^?1 within a potential window of 0–0.46 V in 6 M KOH solution. Significantly, CuO electrode materials achieve remarkable capacitance retentions of approximately 205.8 F g^?1 after 1000 cycles of charge/discharge testing. The CuO@C was further applied as an anode material for lithium‐ion batteries, and a high initial capacity of 1143.7 mA h g^?1 was achieved at a current density of 0.1 C. This work provides a facile and general approach to synthesize carbon‐based materials for application in large‐scale energy‐storage systems.     

Carbon Nanofibers Decorated with Molybdenum Disulfide Nanosheets: Synergistic Lithium Storage and Enhanced Electrochemical Performance

Traditional lithium‐ion batteries that are based on layered Li intercalation electrode materials are limited by the intrinsically low theoretical capacities of both electrodes and cannot meet the increasing demand for energy. A facile route for the synthesis of a new type of composite nanofibers, namely carbon nanofibers decorated with molybdenum disulfide sheets (CNFs@MoS₂), is now reported. A synergistic effect was observed for the two‐component anode, triggering new electrochemical processes for lithium storage, with a persistent oxidation from Mo (or MoS₂) to MoS₃ in the repeated charge processes, leading to an ascending capacity upon cycling. The composite exhibits unprecedented electrochemical behavior with high specific capacity, good cycling stability, and superior high‐rate capability, suggesting its potential application in high‐energy lithium‐ion batteries.     

Electrochemical Performance of Transition Metal‐Coordinated Polypyrrole: A Mini Review

The conductive polymer of polypyrrole can be acted as electroactive electrode material of supercapacitor due to reversible redox behavior and high capacitance. It usually suffers from low electrochemical stability due to the breakdown of polymer molecule chain in the long‐term charge and discharge process. The monometallic or bimetallic‐coordinated polypyrrole usually exhibits the improved electrochemical performance. The transition metal ions such as ruthenium, iron, copper and cobalt are adopted for the coordination modification. The transition metal‐coordinated polypyrrole includes the intrachain and interchain coordination structure between transition metal ion and nitrogen atom of pyrrole ring. It is able to reinforce the polymer molecule chain strength to overcome excessive volumetric swelling and shrinking during charge‐discharge process, improving the cycling stability and rate capability of polypyrrole. Accordingly, the transition metal‐coordinated polypyrrole keeps simultaneously high capacitance performance and electrochemical stability, acting as the promising conductive polymer‐based supercapacitor electrode material for effective energy storage.     

In situ X‐ray Diffraction Studies of Cation and Anion Inter­calation into Graphitic Carbons for Electrochemical Energy Storage Applications

Graphite is a redox‐amphoteric intercalation host and thus capable to incorporate various types of cations and anions between its planar graphene sheets to form so‐called donor‐type or acceptor‐type graphite intercalation compounds (GICs) by electrochemical intercalation at specific potentials. While the LiC_x/C_x donor‐type redox couple is the major active compound for state‐of‐the‐art negative electrodes in lithium‐ion batteries, acceptor‐type GICs were proposed for positive electrodes in the “dual‐ion” and “dual‐graphite” cell, another type of electrochemical energy storage system. In this contribution, we analyze the electrochemical intercalation of different anions, such as bis(trifluoromethanesulfonyl) imide or hexafluorophosphate, into graphitic carbons by means of in situ X‐ray diffraction (XRD). In general, the characterization of battery electrode materials by in situ XRD is an important technique to study structural and compositional changes upon insertion and de‐insertion processes during charge/discharge cycling. We discuss anion (X^–) and cation (M⁺) intercalation/de‐intercalation into graphites on a comparative basis with respect to the M_x⁺C_n^– and C_n⁺X_n^– stoichiometry, discharge capacity, the intercalant gallery height/gallery expansion and the M–M or X–X in‐plane distances.     

High-Performance K–CO2 Batteries Based on Metal-Free Carbon Electrocatalysts

Metal–CO₂ batteries have attracted much attention owing to their high energy density and use of greenhouse CO₂ waste as the energy source. However, the increasing cost of lithium and the low discharge potential of Na–CO₂ batteries create obstacles for practical applications of Li/Na–CO₂ batteries. Recently, earth-abundant potassium ions have attracted considerable interest as fast ionic charge carriers for electrochemical energy storage. Herein, we report the first K–CO₂ battery with a carbon-based metal-free electrocatalyst. The battery shows a higher theoretical discharge potential (E^⊖=2.48 V) than that of Na–CO₂ batteries (E^⊖=2.35 V) and can operate for more than 250 cycles (1500 h) with a cutoff capacity of 300 mA h g⁻¹. Combined DFT calculations and experimental observations revealed a reaction mechanism involving the reversible formation and decomposition of P12₁/c1-type K₂CO₃ at the efficient carbon-based catalyst.     

Electric Double‐Layer Capacitors Based on Highly Graphitized Nanoporous Carbons Derived from ZIF‐67

Nanoporous carbons (NPCs) have large specific surface areas, good electrical and thermal conductivity, and both chemical and mechanical stability, which facilitate their use in energy storage device applications. In the present study, highly graphitized NPCs are synthesized by one‐step direct carbonization of cobalt‐containing zeolitic imidazolate framework‐67 (ZIF‐67). After chemical etching, the deposited Co content can be completely removed to prepare pure NPCs with high specific surface area, large pore volume, and intrinsic electrical conductivity (high content of sp²‐bonded carbons). A detailed electrochemical study is performed using cyclic voltammetry and galvanostatic charge–discharge measurements. Our NPC is very promising for efficient electrodes for high‐performance supercapacitor applications. A maximum specific capacitance of 238 F g^?1 is observed at a scan rate of 20 mV s^?1. This value is very high compared to previous works on carbon‐based electric double layer capacitors.     

Electrochemical capacitance performance of polypyrrole–titania nanotube hybrid

In this study, the polypyrrole–titania nanotube hybrid has been synthesized for an electrochemical supercapacitor application. The highly ordered and independent titania nanotube array is fabricated by an electro-oxidation of titanium sheet through an electrochemical anodization process in an aqueous solution containing ammonium fluoride, phosphoric acid and ethylene glycol. The polypyrrole–titania nanotube hybrid is then prepared by electrodepositing the conducting polypyrrole into well-aligned titania nanotubes through a normal pulse voltammetry deposition process in an organic acetonitrile solution containing pyrrole monomer and lithium perchlorate. The morphology and microstructure of polypyrrole–titania nanotube hybrid are characterized by scanning electron microscopy, infrared spectroscopy and Raman spectroscopy. The electrochemical capacitance performance is determined by cyclic voltammetry and charge/discharge measurement. It indicates that the polypyrrole film can been uniformly deposited on both surfaces of titania nanotube walls, demonstrating a heterogeneous coaxial nanotube structure. The specific capacitance of polypyrrole–titania nanotube hybrid is determined to be 179?F?g^?1 based on the polypyrrole mass. The specific energy and specific power are 7.8?Wh?kg^?1 and 2.8?kW?kg^?1 at a constant charge/discharge current of 1.85?mA?cm^?2, respectively. The retained specific capacitance still keeps 85% of the initial capacity even after 200 cycle numbers. This result demonstrates the satisfying stability and durability of PPy–TiO₂ nanotube hybrid electrode in a cyclic charge/discharge process. Such a composite electrode material with highly ordered and coaxial nanotube hybrid structure can contribute high energy storage for supercapacitor applications.     

Exploiting Mechanistic Solvation Kinetics for Dual‐Graphite Batteries with High Power Output at Extremely Low Temperature

Improving the extremely low temperature operation of rechargeable batteries is vital to the operation of electronics in extreme environments, where systems capable of high‐rate discharge are in short supply. Herein, we demonstrate the holistic design of dual‐graphite batteries, which circumvent the sluggish ion‐desolvation process found in typical lithium‐ion batteries during discharge. These batteries were enabled by a novel electrolyte, which simultaneously provides high electrochemical stability and ionic conductivity at low temperature. The dual‐graphite cells, when compared to industry‐type graphite ∥ LiCoO₂ full‐cells demonstrated an 11 times increased capacity retention at ?60 °C for a 10 C discharge rate, indicative of the superior kinetics of the “dual‐ion” storage mechanism. These trends are further supported by galvanostatic intermittent titration technique (GITT) and electrochemical impedance spectroscopy (EIS) measurements at reduced temperature. This work provides a new design strategy for extreme low‐temperature batteries.     

An Ultrastable Anode for Long‐Life Room‐Temperature Sodium‐Ion Batteries

Sodium‐ion batteries are important alternative energy storage devices that have recently come again into focus for the development of large‐scale energy storage devices because sodium is an abundant and low‐cost material. However, the development of electrode materials with long‐term stability has remained a great challenge. A novel negative‐electrode material, a P2‐type layered oxide with the chemical composition Na_2/3Co_1/3Ti_2/3O₂, exhibits outstanding cycle stability (ca. 84.84 % capacity retention for 3000 cycles, very small decrease in the volume (0.046 %) after 500 cycles), good rate capability (ca. 41 % capacity retention at a discharge/charge rate of 10 C), and a usable reversible capacity of about 90 mAh g^?1 with a safe average storage voltage of approximately 0.7 V in the sodium half‐cell. This P2‐type layered oxide is a promising anode material for sodium‐ion batteries with a long cycle life and should greatly promote the development of room‐temperature sodium‐ion batteries.     

A dandelion-like carbon microsphere/MnO2 nanosheets composite for supercapacitors

This article reported the electrochemical performance of a novel cabon microsphere/MnO₂ nanosheets (CMS/MnO₂) composite prepared by a in situ self-limiting deposition method under hydrothermal condition. The results of scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed that MnO₂ nanosheets homogeneously grew onto the surface of CMS to form a loose-packed and dandelion-like core/shell microstructure. The unique microstructure plays a basic role in electrochemical accessibility of electrolyte to MnO₂ active material and a fast diffusion rate within the redox phase. The results of cyclic voltammetry, galvanostatic charge/discharge and electrochemical impedance spectrometry indicated that the prepared CMS/MnO₂ composite presented high capacitance of 181 F·g⁻¹ and long cycle life of 61% capacity retention after 2000 charge/discharge cycles in 1 mol/L Na₂SO₄ solution, which show strong promise for high-rate electrochemical capacitive energy storage applications.     

Preparation of NiAl double hydroxide@polypyrrole materials for high‐performance supercapacitors

A novel NiAl double hydroxide@polypyrrole (LDH@PPy) core–shell material was designed and fabricated by a facile in situ oxidative polymerization of pyrrole (Py) monomer. The microstructure and morphology of the LDH@PPy composites were determined by X‐ray diffractometer, Fourier transform infrared (FTIR), scanning electron microscopy/transmission electron microscopy, and thermogravimetric and differential thermal, revealing that the polypyrrole (PPy) was successfully coated onto the surface of the NiAl‐LDH (LDH) core and the loading amount of PPy impacted the thickness and the dispersion of the conductive PPy shell. The electrochemical performances of the LDH@PPy composites were also evaluated by cyclic voltammogram, electrochemical impedance spectroscopy, and galvanostatic charge–discharge measurements. The results indicated that the supercapacitor performances were attributed to the synergy of unique core–shell heterostructure and each individual component, where the LDH core provided the high‐energy storage capacity and the PPy shell with networks had high electronic conductivity. These shorted the ion diffusion pathway and made electrolyte ions more easily accessible for faradic reactions to enhance the electrochemical performance of the LDH@PPy composites. It was found that the LDH@PPy composite (LDH@PPy₇) fabricated at 7 mL?L^?1 of Py monomer feed exhibiting the best electrochemical performances with high specific capacitance of 437.5 F?g^?1 at 2 A?g^?1 and excellent capacitance retention of about 91% after 1000 cycles. The work provides a simple approach for designing organic–inorganic core–shell materials with potential application in supercapacitors. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1653–1662     

Chitin and chitin-cellulose composite hydrogels prepared by ionic liquid-based process as the novel electrolytes for electrochemical capacitors

This paper reports on the preparation and electrochemical performance of chitin- and chitin-cellulose-based hydrogel electrolytes. The materials were prepared by a casting solution technique using ionic liquid-based solvents. The method of chitin dissolution in ionic liquid with the assistance of dimethyl sulfoxide co-solvent was investigated. The obtained membranes were soaked with 1-M lithium sulfate aqueous solution. The prepared materials were preliminarily characterized in terms of structural and physicochemical properties. Further, the most promising biopolymer membranes were assembled with activated carbon cloth electrodes in symmetric electrochemical capacitor cells. The electrochemical performances of these devices were studied in a 2-electrode system by commonly known electrochemical techniques, such as cyclic voltammetry, galvanostatic charge/discharge, and electrochemical impedance spectroscopy. The devices operated at a maximum voltage of 0.8 V. All the investigated materials have shown high efficiency in terms of specific capacitance, power density, and cyclability. The studied capacitors exhibited specific capacitance values in the range of 92–98 F g⁻¹, with excellent capacitance retention (ca. 97–98%) after 20,000 galvanostatic charge and discharge cycles. Taking into account the above information and the eco-friendly nature of the biopolymer, it appears that the prepared chitin- and chitin-cellulose-based hydrogel electrolytes can be promising components for green electrochemical capacitors.

     

Facile SILAR Processed Bi2S3:PbS Solid Solution on MWCNTs for High‐performance Electrochemical Supercapacitor

Carbon based composite materials have gained much attention because of fulfilling desirable properties for supercapacitor application. In the featured work, the thin film of Bi₂S₃:PbS solid solution has been synthesized on multi‐walled carbon nanotubes (MWCNTs) by simple successive ionic layer adsorption and reaction (SILAR) method. The nanoparticle morphology provides sufficient electroactive channels for electrolyte ions to penetrate during electrochemical activities. The composite exhibits superior specific capacitance 676 F/g at constant specific current density of 5.56 A/g with fast charge‐discharge cycles. In association of energy storage characteristics, the fabricated symmetric cell exhibits excellent energy density of 13.36 Wh/kg by acquiring power density of 0.83 kW/kg. The superior results of the hybrid electrode promise a novel direction for high performance supercapacitor application.     

Substituent effect on supercapacitive performances of conducting polymer‐based redox electrodes: Poly(3′,4′‐bis(alkyloxy) 2,2′:5′,2″‐terthiophene) derivatives

This work reports the synthesis of novel poly(3′,4′‐bis(alkyloxy)terthiophene) derivatives (PTTOBu, PTTOHex, and PTTOOct) and their supercapacitor applications as redox‐active electrodes. The terthiophene‐based conducting polymers have been derivatized with different alkyl pendant groups (butyl‐, hexyl‐, and octyl‐) to explore the effect of alkyl chain length on the surface morphologies and pseudocapacitive properties. The electrochemical performance tests have revealed that the length of alkyl substituent created a remarkable impact over the surface morphologies and charge storage properties of polymer electrodes. PTTOBu, PTTOHex, and PTTOOct‐based electrodes have reached up to specific capacitances of 94.3, 227.3, and 443 F g⁻¹ at 2.5 mA cm⁻² constant current density, respectively, in a three‐electrode configuration. Besides, these redox‐active electrodes have delivered satisfactory energy densities of 13.5, 29.3, and 60.7 W h kg⁻¹ and power densities of 0.98, 1, and 1.1 kW kg⁻¹ with good capacitance retentions after 10,000 charge/discharge cycles in symmetric solid‐state micro‐supercapacitor devices. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 480–495     

Preparation of hierarchical polyaniline nanotubes based on self‐assembly and its electrochemical capacitance

This article reports the preparation and self‐assembly of polyaniline (PANI) nanotubes, which were chemically synthesized by using in situ doping polymerization in the presence of ammonium persulfate (APS; (NH₄)S₂O₈) as the oxidant without the use of an external template. The synthesized hierarchically nanotubes with a shape of a single nanotube with a length of 0.6 to 0.8 µm and an average with of 100 nm assembled from nanoparticles. The effects of the [salicylic acid]/[aniline] ratio on the size and capacitance of PANI nanotubes were studied. The specific capacitance behavior of the PANI nanotubes was also investigated by using cyclic voltammogram and galvanostatic charge–discharge tests. A maximum discharge‐specific capacitance of 422.5 F/g could be achieved, suggesting its potential application in electrode material for electrochemical capacitors. Copyright © 2011 John Wiley & Sons, Ltd.