A Highly Selective Potassium Sensor for the Detection of Potassium in Living Tissues

The development of highly selective sensors for potassium is of great interest in biology. Two new hydrosoluble potassium sensors (Calix‐COU‐Alkyne and Calix‐COU‐Am) based on a calix[4]arene bis(crown‐6) and an extended coumarin were synthesized and characterized. The photophysical properties and complexation studies of these compounds have been investigated and show high molar extinction coefficients and high fluorescence quantum yields. Upon complexation with potassium in the millimolar concentration range, an increase of one‐ and two‐photon fluorescence emission is detected. A twofold fluorescence enhancement is observed upon excitation at λ=405 nm. The ligands present excellent selectivity for potassium in the presence of various competitive cations in water and in a physiological medium. The photophysical properties are not affected by the presence of a large amount of competing cations (Na⁺, Ca²⁺, Mg²⁺, etc.). Ex vivo measurements on mouse hippocampal slices show that Calix‐COU‐Alkyne accumulates extracellularly and does not alter the neuronal activity. Furthermore, the sensor can be utilized to monitor slow extracellular K⁺ increase induced by inhibition of K⁺ entry into the cells.     

一种基于硫杂杯[4]芳烃的高效银离子载体

合成了基于下缘含有酰肼基团的硫杂杯芳烃衍生物的银离子载体1,其核磁研究证实硫杂杯芳烃以1,3-交替构象存在,并且通过非竞争萃取实验和竞争萃取实验研究了它对碱金属和过渡金属离子（Li⁺, Na⁺, K⁺, Cs⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺ and Ag⁺）的键合能力和选择性。实验结果表明：将酰肼基团引入1,3-交替构象的硫杂杯芳烃骨架的下缘可以提高其对Ag⁺的键合能力和选择性,同时,对Cu²⁺的萃取能力较弱,对碱金属离子和其它的重金属离子几乎没有萃取能力。进一步的核磁滴定和电喷雾质谱实验显示化合物1与银离子形成配合物的配合计量比为1：1,由此推断主要由“N-Ag⁺”配位键以及硫杂杯芳烃骨架的协同作用构成了化合物1与银离子的配合模式。     

Calix[4]arene-based fluorescent probe and the adsorption capacity of its electrospun nanofibrous film for the cesium cation as an adsorbent

Calix[4]arene-based cation receptor 1 has been synthesised by following a multi-step synthetic procedure. The fluorescence properties of 1 upon the addition of various metal ions were investigated by fluorescence spectroscopy. As a result, it was revealed that 1 displayed dramatic quenching effect upon the exposure to Cs⁺. In contrast, no significant quenching effects were observed upon the addition of other metal ions such as Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ag⁺, Zn²⁺ and Ni²⁺. Compound 1 was also found by Job plot to form a 1:1 complex with Cs⁺. In addition, we also prepared 1-embedded electrospun nanofibrous film (NF-1) as an adsorbent for Cs⁺. NF-1 is proved to adsorb Cs⁺ effectively from an aqueous solution, indicating that it would be usefully utilised as an adsorbent to remove Cs⁺.     

Diastereochemical differentiation of bicyclic diols using metal complexation and collision‐induced dissociation mass spectrometry

Metal complex formation was investigated for di‐exo‐, di‐endo‐ and trans‐2,3‐ and 2,5‐disubstituted trinorbornanediols, and di‐exo‐ and di‐endo‐ 2,3‐disubstituted camphanediols using different divalent transition metals (Co²⁺, Ni²⁺, Cu²⁺) and electrospray ionization quadrupole ion trap mass spectrometry. Many metal‐coordinated complex ions were formed for cobalt and nickel: [2M+Met]²⁺, [3M+Met]²⁺, [M–H+Met]⁺, [2M–H+Met]⁺, [M+MetX]⁺, [2M+MetX]⁺ and [3M–H+Co]⁺, where M is the diol, Met is the metal used and X is the counter ion (acetate, chloride, nitrate). Copper showed the weakest formation of metal complexes with di‐exo‐2,3‐disubstituted trinorbornanediol yielding only the minor singly charged ions [M–H+Cu]⁺, [2M–H+Cu]⁺ and [2M+CuX]⁺. No clear differences were noted for cobalt complex formation, especially for cis‐2,3‐disubstituted isomers. However, 2,5‐disubstituted trinorbornanediols showed moderate diastereomeric differentiation because of the unidentate nature of the sterically more hindered exo‐isomer. trans‐Isomers gave rise to abundant [3M–H+Co]⁺ ion products, which may be considered a characteristic ion for bicyclo[221]heptane trans‐2,3‐ and trans‐2,5‐diols. To differentiate cis‐2,3‐isomers, the collision‐induced dissociation (CID) products for [3M+Co]²⁺, [M+CoOAc]⁺, [2M–H+Co]⁺ and [2M+CoOAc]⁺ cobalt complexes were investigated. The results of the CID of the monomeric and dimeric metal adduct complexes [M+CoOAc]⁺ and [2M–H+Co]⁺ were stereochemically controlled and could be used for stereochemical differentiation of the compounds investigated. In addition, the structures and relative energies of some complex ions were studied using hybrid density functional theory calculations. Copyright © 2009 John Wiley & Sons, Ltd.     

Fluorescent chemosensor for Cu2+ ion based on iminoanthryl appended calix[4]arene

Calix[4]arene based podands 1a of cone conformation and 1b of 1,3-alternate conformation possessing imine units and bearing anthracene moieties have been synthesized by a 1 + 2 Schiff base condensation in good yields and examined for their cation recognition abilities towards cations such as lithium, sodium, potassium, nickel, cadmium, copper, zinc, lead, silver and mercury ions by UV–vis and fluorescence spectroscopy. The calix[4]arene derivative 1b shows a selective fluorescence enhancement in presence of Cu²⁺ ions among the various metal ions tested (Li⁺, Na⁺, K⁺, Ni²⁺, Cd²⁺, Cu²⁺, Zn²⁺, Pb²⁺, Ag⁺ and Hg²⁺ ions). The colour of the solution changes from colourless to light yellow in the presence of Cu²⁺ ions. The stoichiometry of the complex formed between 1b and Cu²⁺ was found to be 1:1 as established by Job’s plot.     

Determination of the complex formation constants for some water-soluble polymers with trivalent metal ions by differential pulse polarography

The formation of metal complexes between water-soluble polymers, poly(vinyl alcohol) [PVA], poly(N-vinylpyrrolidone) [PVP], poly(acrylamide) [PAAm] and poly(ethylene oxide) [PEO] with trivalent metal ions, Fe³⁺, Cr³⁺, and V³⁺ were studied by using differential pulse polarography (DPP). The general experimental observation is the shift of totally reversible reduction peaks (M³⁺+Hg+e^–M²⁺+Hg) towards more negative potentials when the complexing water-soluble polymers are added to the solution of trivalent metal ions. The negative shift in potential permitted the determination of complex formation constants (K_f) between trivalent metal ions and water soluble polymers. The complex formation constants for Fe³⁺, Cr³⁺, and V³⁺ ions with these polymers increased in the order of V³⁺>Cr³⁺>Fe³⁺.     

Synthesis and complexing properties ofcis,cis-1,3,5-tri-[2-(diphenylphosphinyI)ethylamino]cyclohexane

A novel polydentate phosphorus-containing complexing agent,cis,cis-1,3,5-tri[2-(diphenyl-phosphinyl)ethylamino]cyclohexane, has been prepared on the basis ofcis,cis-1,3,5-triamino-cyclohexane. The method of potentiometric titration in an aqueous—organic medium (70% ethanol, ionic strength 0.01M LiNO₃, 298 K) has been used to study the acid-base and complexing properties of the title compound. The ligand thus prepared forms 11 complexes with Cu²⁺, Co²⁺, Zn²⁺, and Ni²⁺ cations; formation of hydroxocomplexes MOHL⁺ has been observed in the case of Zn²⁺ and Cd²⁺.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1276–1279, July, 1993.The authors are grateful to A. G. Matveeva for his assistante in discussing the results of this study and in preparing this paper.     

Silver(I)‐Selective PVC Membrane Potentiometric Sensor Based on a Recently Synthesized Calix[4]arene

A new PVC membrane potentiometric sensor for Ag(I) ion based on a recently synthesized calix[4]arene compound of 5,11,17,23‐tetra‐tert‐butyl‐25,27‐dihydroxy‐calix[4]arene‐thiacrown‐4 is developed. The electrode exhibits a Nernstian response for Ag(I) ions over a wide concentration range (1.0×10^?2?1.0×10^?6 M) with a slope of 53.8±1.6 mV per decade. It has a relatively fast response time (5–10 s) and can be used for at least 2 months without any considerable divergence in potentials. The proposed electrode shows high selectivity towards Ag⁺ ions over Pb²⁺, Cd²⁺, Co²⁺, Zn²⁺, Cu²⁺, Ni²⁺, Sr²⁺, Mg²⁺, Ca²⁺, Li⁺, K⁺, Na⁺, NH₄⁺ ions and can be used in a pH range of 2–6. Only interference of Hg²⁺ is found. It is successfully used as an indicator electrode in potentiometric titration of a mixture of chloride, bromide and iodide ions.     

ESI‐MS studies of the non‐covalent interactions between biologically important metal ions and N‐sulfonylcytosine derivatives

The aim of this report is to present the electrospray ionization mass spectrometry results of the non‐covalent interaction of two biologically active ligands, N‐1 ‐ (p‐toluenesulfonyl)cytosine, 1‐TsC, 1 and N‐1 ‐ methanesulfonylcytosine, 1‐MsC, 2 and their Cu(II) complexes Cu(1‐TsC‐N3)₂Cl₂, 3 and Cu(1‐MsC‐N3)₂Cl₂ and 4 with biologically important cations: Na⁺, K⁺, Ca²⁺, Mg²⁺ and Zn²⁺. The formation of various complex metal ions was observed. The alkali metals Na⁺ and K⁺ formed clusters because of electrostatic interactions. Ca²⁺ and Mg²⁺ salts produced the tris ligand and mixed ligand complexes. The interaction of Zn²⁺ with 1–4 produced monometal and dimetal Zn²⁺ complexes as a result of the affinity of Zn²⁺ ions toward both O and N atoms. Copyright © 2016 John Wiley & Sons, Ltd.     

Calix[4]arenes with carboxamide and sulfonamide groups and their complexation with transition metal salts

Calix[4]arene derivatives functionalized by ester and carboxamide groups on the lower rim and sulfonamide groups on the upper rim were synthesized, and their complexing properties toward transition metal salts (Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺) were studied by extraction in chloroform-water system. The presence of carboxamide and sulfonamide fragments in the ligand was shown to considerably enhance binding of transition metal cations.     

A New Silver(I) Potentiometric Sensor Based on a Calix[4]arene Substituted at the Narrow Rim by Amide/Phosphoryl Groups

A coated‐wire type silver ion‐selective electrode has been constructed using a modified p‐tert‐butyl‐calix[4]arene by amide‐phosphoryl groups, named 5, 11, 17, 23‐tetra‐tert‐butyl‐25, 27‐bis(diethylcarbamoylmethoxy)‐26,28‐bis(diphenylphosphinoylmethoxy)calix[4]arene (Calix), as neutral carrier. A plasticized PVC membrane containing 30% PVC, 60% ortho‐nitrophenyloctylether (NPOE), 2% sodium tetraphenylborate (NaTPB) and 8% “Calix” was coated on a graphite rod. The prepared electrode exhibited a linear Nernstian response over the range 1 × 10^?6 to 1 × 10^?2 M with a slope 58.4 (±0.2) mV per decade change and a detection limit of 6.3 × 10^?7 M. The working pH range of the sensor is 4‐6.7. It is found that the dynamic response time of the electrode to achieve a steady potential was very fast (～11 s). The selectivity of the sensor relative to NH₄⁺, Li⁺, Na⁺, K⁺, Ca²⁺, Sr²⁺, Ba²⁺, Mn²⁺, Pb²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Fe³⁺, La³⁺, Sm³⁺ and Th⁴⁺ was examined. The prepared electrode exhibits adequate stability with good reproducibility (57.6 ± 0.5 mV per decade change for 10 weeks). It was successfully used as an indicator electrode in potentiometric titration of silver ions with standard solution of EDTA. The sensor was also used for silver ion measurements in various synthetic samples.     

A selective colorimetric chemosensor for lanthanide ions

The synthesis and complexing properties of a calix[4]arene derivate (6) carrying two spirobenzopyran moieties are described. The addition of lanthanide ions resulted in significant UV-vis spectral shifts (68-84 nm) in visible region. It indicates that the synthetic receptor can recognize lanthanide ions by naked eyes over other cations including Na⁺, K⁺, Mg²⁺, Ca²⁺, Fe³⁺, Cu²⁺ and Zn²⁺. The mechanism of recognition was studied with ¹H NMR, UV-vis spectra and emission spectra. The receptor may be applied to sense lanthanide ions.     

Bipyridinophane‐containing conjugated polymers modulated with an intramolecular aromatic C?H/π interaction

Bipyridinophane–fluorene conjugated copolymers have been synthesized via Suzuki and Heck coupling reactions from 5,8‐dibromo‐2,11‐dithia[3]paracyclo[3](4,4′)‐2,2′‐bipyridinophane and suitable fluorene precursors. Poly[2,7‐(9,9‐dihexylfluorene)‐co‐alt‐5,8‐(2,11‐dithia[3]paracyclo[3](4,4′)‐2,2′‐bipyridinophane)] ( P7 ) exhibits large absorption and emission redshifts of 20 and 34 nm, respectively, with respect to its planar reference polymer Poly[2,7‐(9,9‐dihexylfluorene)‐co‐alt‐1,4‐(2,5‐dimethylbenzene)] ( P11 ), which bears the same polymer backbone as P7 . These spectral shifts originate from intramolecular aromatic C? H/π interactions, which are evidenced by ultraviolet–visible and ¹H NMR spectra as well as X‐ray single‐crystal structural analysis. However, the effect of the intramolecular aromatic C? H/π interactions on the spectral shift in poly[9,9‐dihexylfluorene‐2,7‐yleneethynylene‐co‐alt‐5,8‐(2,11‐dithia[3]paracyclo[3](4,4′)‐2,2′‐bipyridinophane)] ( P10 ) is much weaker. Most interestingly, the quenching behaviors of these two conjugated polymers are largely dependent on the polymer backbone. For example, the fluorescence of P7 is efficiently quenched by Cu²⁺, Co²⁺, Ni²⁺, Zn²⁺, Mn²⁺, and Ag⁺ ions. In contrast, only Cu²⁺, Co²⁺, and Ni²⁺ ions can partially quench the fluorescence of P10 , but much less efficiently than the fluorescence of P7 . The static Stern–Volmer quenching constants of Cu²⁺, Co²⁺, and Ni²⁺ ions toward P7 are of the order of 10⁶ M^?1, being 1300, 2500, and 37,300 times larger than those of P10 , respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4154–4164, 2006     

Lithium zincopyrophosphate,Li2Zn3(P2O7)2

The title compound, dilithium(I) trizinc(II) bis[diphosphate(4−)], is the first quaternary lithium zincopyrophosphate in the Li–Zn–P–O system. It features zigzag chains running along c, which are built up from edge‐sharing [ZnO₅] trigonal bipyramids. One of the two independent Zn sites is fully occupied, whereas the other is statistically disordered by Zn²⁺ and Li⁺ cations, although the two Zn sites have similar coordination environments. Li⁺ cations occupy a four‐coordinated independent site with an occupancy factor of 0.5, as well as being disordered on the partially occupied five‐coordinated Zn site with a Zn²⁺/Li⁺ ratio of 1:1.     

A coordinatively flexible hexadentate ligand gives structurally isomeric complexes M2(L)X3 (M = Cu,Zn; X = Br,Cl)

Polypyridyl multidentate ligands based on ethylenediamine backbones are important metal‐binding agents with applications in biomimetics and homogeneous catalysis. The seemingly hexadentate tpena ligand [systematic name: N,N,N′‐tris(pyridin‐2‐ylmethyl)ethylenediamine‐N′‐acetate] reacts with zinc chloride and zinc bromide to form trichlorido[μ‐N,N,N′‐tris(pyridin‐2‐ylmethyl)ethylenediamine‐N′‐acetato]dizinc(II), [Zn₂(C₂₂H₂₄N₅O₂)Cl₃], and tribromido[μ‐N,N,N′‐tris(pyridin‐2‐ylmethyl)ethylenediamine‐N′‐acetato]dizinc(II), [Zn₂Br₃(C₂₂H₂₄N₅O₂)]. One Zn^II ion shows the anticipated N₅O coordination in an irregular six‐coordinate site and is linked by an anti carboxylate bridge to a tetrahedral ZnX₃ (X = Cl or Br) unit. In contrast, the Cu^II ions in aquatribromido[μ‐N,N,N′‐tris(pyridin‐2‐ylmethyl)ethylenediamine‐N′‐acetato]dicopper(II)–tribromido[μ‐N,N,N′‐tris(pyridin‐2‐ylmethyl)ethylenediamine‐N′‐acetato]dicopper(II)–water (1/1/6.5) [Cu₂Br₃(C₂₂H₂₄N₅O₂)][Cu₂Br₃(C₂₂H₂₄N₅O₂)(H₂O)]·6.5H₂O, occupy two tpena‐chelated sites, one a trigonal bipyramidal N₃Cl₂ site and the other a square‐planar N₂OCl site. In all three cases, electrospray ionization mass spectra were dominated by a misleading ion assignable to [M(tpena)]⁺ (M = Zn²⁺ and Cu²⁺).     

Counter‐Intuitive Gas‐Phase Reactivities of [V2]+ and [V2O]+ towards CO2 Reduction: Insight from Electronic Structure Calculations

[V₂O]⁺ remains “invisible” in the thermal gas‐phase reaction of bare [V₂]⁺ with CO₂ giving rise to [V₂O₂]⁺; this is because the [V₂O]⁺ intermediate is being consumed more than 230 times faster than it is generated. However, the fleeting existence of [V₂O]⁺ and its involvement in the [V₂]⁺ → [V₂O₂]⁺ chemistry are demonstrated by a cross‐over labeling experiment with a 1:1 mixture of C¹⁶O₂/C¹⁸O₂, generating the product ions [V₂¹⁶O₂]⁺, [V₂¹⁶O¹⁸O]⁺, and [V₂¹⁸O₂]⁺ in a 1:2:1 ratio. Density functional theory (DFT) calculations help to understand the remarkable and unexpected reactivity differences of [V₂]⁺ versus [V₂O]⁺ towards CO₂.     

基于苯并噻唑Zn2+荧光探针及其细胞造影应用

设计合成基于苯并噻唑Zn²⁺荧光增强型探针BHP,在HEPES缓冲液中测其对Zn²⁺识别性能。实验结果表明,BHP对Zn²⁺有较高的选择性,对其他金属离子如Cd²⁺,Fe²⁺,Ni²⁺,Pb²⁺,Hg²⁺,Al³⁺,Mn²⁺,Ag⁺,Cu²⁺,Co²⁺,Na⁺,K⁺,Mg²⁺和Ca²⁺无明显荧光增强响应。BHP与Zn²⁺按1：1计量比配位,在生理条件下荧光强度不受pH值影响。在HeLa细胞中对Zn²⁺的造影表明BHP可用于生物体Zn²⁺检测。     

Synthesis and selective recognition toward zinc ion of chiral poly(imine‐triazole)

A novel AB type of clickable monomer, (S)‐2‐[(2‐azido‐1‐phenylethylimino)methyl]‐5‐propargyloxyphenol (AMPP) was designed and polymerized to yield a class of main‐chain chiral poly(imine‐triazole)s through the metal‐free click reaction. With the thermally induced polymerization, the desired polytriazoles can be easily prepared in high yields by a stepwise heating‐up process and have the number‐average molecular masses ranging from 5.1 × 10³ to 58.1 × 10³ (polydispersity indices = 1.38?1.68). The polymers were characterized by Fourier Transform Infrared spectroscopy (FTIR), ¹H Nuclear Magnetic Resonance (NMR), and gel permeation chromatography, and their optical properties were studied by fluorescence and circular dichroism (CD) spectroscopies. As a chemosensor, these polymers exhibited a selective “turn‐on” fluorescence enhancement response toward Zn²⁺ ion over other cations such as Na⁺, K⁺, Mg²⁺, Ca²⁺, Ag⁺, Pb²⁺, Cd²⁺, Hg²⁺, Mn²⁺, and Ni²⁺ in dimethyl sulfoxide. However, the Zn²⁺‐induced fluorescence signal was subject to serious interference by Al³⁺, Cu²⁺, Cr³⁺, and Fe³⁺ ions. Interestingly, the chiral polymer showed distinctive changes in the CD spectra on complexation with Zn²⁺, which allowed for the discrimination of this ion in the presence of other species tested including those interfering ions observed in the fluorescent detection. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2248–2257     

HPLC‐DAD and HPLC‐ESI‐MS separation,determination and identification of the spin‐labeled diastereoisomers of podophyllotoxin

Spin‐labeled nitroxide derivatives of podophyllotoxin had better antitumor activity and less toxicity than that of the parent compounds. However, the 2‐H configurations of these spin‐labeled derivatives cannot be determined by nuclear magnetic resonance (NMR) methods. In the present paper, a high‐performance liquid chromatography‐diode array detection (HPLC‐DAD) and a high‐performance liquid chromatography‐electrospray ionization tandem mass spectrometry (HPLC‐ESI/MS/MS) method were developed and validated for the separation, identification of four pairs of diastereoisomers of spin‐labeled derivatives of podophyllotoxin at C‐2 position. In the HPLC‐ESI/MS spectra, each pair of diastereoisomers of the spin‐labeled derivatives in the mixture was directly confirmed and identified by [M+H]⁺ ions and ion ratios of relative abundance of [M‐ROH+H]⁺ (ion 397) to [M+H]⁺. When the [M‐ROH+H]⁺ ions (at m/z 397) were selected as the precursor ions to perform the MS/MS product ion scan. The product ions at m/z 313, 282, and 229 were the common diagnostic ions. The ion ratios of relative abundance of the [M‐ROH+H]⁺ (ion 397) to [M+H]⁺, [A+H]⁺ (ion 313) to [M‐ROH+H]⁺, [A+H‐OCH₃]⁺ (ion 282) to [M‐ROH+H]⁺ and [M‐ROH‐ArH+H]⁺ (ion 229) to [M‐ROH+H]⁺ of each pair of diastereoisomers of the derivatives specifically exhibited a stereochemical effect. Thus, by using identical chromatographic conditions, the combination of DAD and MS/MS data permitted the separation and identification of the four pairs of diastereoisomers of spin‐labeled derivatives of podophyllotoxin at C‐2 in the mixture.     

Ion-interaction chromatographic separation of metal cations in the presence of complexing agents

The mechanism of the separation of selected divalent metal cations (Zn²⁺, Ni²⁺, Co²⁺, Cd²⁺, Mn²⁺, Fe²⁺ and Pb²⁺) by ion-interaction chromatography (IIC) in the presence of complexing agents has been investigated; the dependence of the retention of the analyte on the concentration of the complexing ligand has been studied. Separations have been obtained on an octadecyl-bonded silica column, mobile phases containing an ion-interaction agent (octane sulfonate), eluting cations (Na⁺ ions) and a complexing ligand (oxalate anions).