Cyclopropanol intermediates in the synthesis of the C<Superscript>5</Superscript>–C<Superscript>14</Superscript> fragment of laulimalides

Two novel schemes have been developed for the synthesis of the C⁵–C¹⁴ fragment of the macrocyclic antitumor drug laulimalide and its analogs via transformations of cyclopropanol intermediates.     

UV-sensitized nanomaterial semiconductor catalytic reduction of Co<Superscript>III</Superscript>(N–N)<Subscript>3</Subscript><Superscript>3+</Superscript>/nm-TiO<Subscript>2</Subscript> and Co:TiO<Subscript>2</Subscript> formation: SEM-EDX and HRTEM analyses

Interfacial electron transfer induced by 254 nm light at nanomaterial (nm) titanium dioxide/Co^III(N–N)₃ ³⁺ interface in binary mixed solvent media such as water/methanol (or 1,4-dioxane) has been probed. The distinct photo reduction of cobalt(III) complexes, Co^III(N–N)₃ ³⁺; (N–N)=(NH₃)₂, en (1,2-diamino ethane), pn (1,2-diamino propane), tn (1,3-diamino propane), and bn (1,4-diamino butane), by excited nm-TiO₂ particles: Co^III + nm-TiO₂ + hν → TiO₂ (h⁺;e⁻) + Co^III → nm-TiO₂ (h) + Co^II is solvent controlled. The electron transfer from the conduction band of TiO₂ (e⁻, CB) onto the metal centre of the complex consists of (i) electron transport from CB into surface-adsorbed species A: Co^III(N–N)₃ ³⁺ (ii) solution phase species B: Co^III(N–N)₃ ³⁺ _(sol.), accumulated at the surface of the nanoparticle. In addition, UV irradiation of Co^III(N–N)₃ ³⁺ stimulates generation of \textCo_\textaq^\textII {\text{Co}}_{\text{aq}}^{\text{II}} ion, due to charge transfer transition, in solution phase. After UV irradiation, cobalt-implanted nm-TiO₂ separated as gray ultrafine particles, which were isolated. Photo efficiency of the formation of Co^II ion was estimated and the cobalt implanted nanomaterial crystals isolated from the photolyte solutions were subjected to SEM-EDX, X-ray mapping, and HRTEM-SAED analyses. Solvent medium was found to contribute in both the formation of Co^II ion and interstitial insertion of cobalt into the lattice of nm-TiO₂.     

Pulse radiolysis study of the oxidation of the I<Superscript>−</Superscript> ions with the radical anions Br<Subscript>2</Subscript><Superscript>·−</Superscript> in an aqueous solution: formation and properties of the radical anion BrI<Superscript>·−</Superscript>

The radiation chemical redox transformations in solutions of bromides in the presence of minor additives of iodides were studied by pulse radiolysis. The change in the concentrations of the Br⁻ and I⁻ ions changes the ratio of the formed short-lived radical anions Br₂ ^·−, BrI^·−, and I₂ ^·−. The spectrum of the mixed radical anion BrI^·− contains a broad optical band at 370 nm with ɛ₃₇₀ = 9650 L mol⁻¹ cm⁻¹. The reduction potential of the BrI^·−/Br⁻, I⁻ pair is 1.25 V. The rate constants for the forward and backward reactions Br₂ ^·− + I⁻ ⇌ BrI^·− + Br⁻ are k _f = 4.3·10⁹ and k _r = 1.0·10⁵ L mol⁻¹ s⁻¹, respectively; for the reactions BrI^·− ⇌ Br⁻ + I^·, k _f = 5.7·10⁸ s⁻¹ and k _r = 1.0·10¹⁰ L mol⁻¹ s⁻¹. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1787–1792, September, 2008.     

Colour tuneability and white light generation in Yb<Superscript>3+</Superscript>–Ho<Superscript>3+</Superscript>–Tm<Superscript>3+</Superscript> co-doped SiO<Subscript>2</Subscript>–LaF<Subscript>3</Subscript> nano-glass-ceramics prepared by sol–gel method

Nanostructured transparent glass-ceramics with composition of 95SiO₂–5LaF₃ co-doped with 0.3Yb³⁺, 0.1Ho³⁺ and 0.1Tm³⁺ (mol%) were synthesized by thermal treatment of precursor sol–gel derived glasses. X-ray diffraction and transmission electron microscopy analysis point out the precipitation of hexagonal LaF₃ nanocrystals with diameter ranging from 11 to 20 nm in these nano-glass-ceramics. White light generation by means of efficient blue, green and red up-conversion luminescence under infrared excitation at 980 nm was observed and involved mechanisms were analyzed. Colour tuneability is achieved by varying the up-conversion emission ratios as a function of pump power.     

<Superscript>13</Superscript>C-labeled bilirubin: synthesis of 3<Superscript>1</Superscript>(3<Superscript>2</Superscript>),17<Superscript>1</Superscript>(17<Superscript>2</Superscript>)-di-[<Superscript>13</Superscript>C]-mesobilirubin-XIIIα

Abstract  The title compound, labeled with ¹³C in the ethyl groups was synthesized from K¹³CN and low-molecular-weight components. The synthetic relay compound was 3¹(3²)[¹³C]-xanthobilirubinic acid methyl ester in a synthetic route that leads to a label in the ethyl β-substituent of a dipyrrinone model for bilirubin. This labeled dipyrrinone was oxidatively coupled to the dimethyl ester of mesobiliverdin-XIIIα, thereby providing a route to a ¹³C-labeled mesobiliverdin and mesobilirubin, with one carbon of each ethyl being 98% ¹³C-enriched. Graphical Abstract        

Synthesis of Pr<Superscript>3+</Superscript> doped or Tb<Superscript>3+</Superscript>–Mg codoped CaSnO<Subscript>3</Subscript> perovskite phosphor by the polymerized complex method

Pr³⁺ doped or Tb³⁺–Mg codoped CaSnO₃ phosphor powder with perovskite structure was synthesized by the polymerized complex method. Powder samples crystallized into the perovskite phase at approximately 600 °C, which is 400 °C lower than the crystallization temperature for the solid-state reaction method. Uniform-sized powders with average particle sizes of 1–2 μm were obtained after heat treatment at 1,400 °C. Although the samples heat-treated at 600 °C did not exhibit photoluminescence, white photoluminescence of Pr³⁺ doped CaSnO₃ or green photoluminescence of Tb³⁺–Mg codoped CaSnO₃ was observed from the sample heat-treated above 800 °C. The intensity of the photoluminescence increased with increase of the heat-treatment temperature and reached a maximum for heat treatment at 1,400 °C. The maximum photoluminescence intensity for the samples prepared by the polymerized complex method was larger than those prepared by solid-state reaction method, which is probably due to the homogeneous mixing of the doped rare earth ions.     

Phase diagram of the selenium–sulfur system in the pressure range 1 × 10<Superscript>–5</Superscript>–1 × 10<Superscript>–1</Superscript> MPa

The partial pressures of the components in the saturated vapor of the Se–S system were determined and presented as the temperature–concentration dependences. Based on these data, the boundaries of the melt–vapor phase transition at atmospheric pressure and in vacuum (1350, 100, and 10 Pa) were calculated. A complete phase diagram was constructed, which included the vapor–liquid equilibrium fields at atmospheric and low pressures, whose boundaries allowed us to determine the behavior of sulfur and selenium during distillation separation.     

Consistent transfer of protons in molecular rings of water: Origination of H<Subscript>3</Subscript>O<Superscript>+</Superscript> and OH<Superscript>–</Superscript> ions

For the first time, nonempirical modeling of water clusters composed of several fused molecular rings supplemented with the theoretical analysis of quantum states of the systems provided grounds for clarifying the conditions when consistent shifts of bridge protons within one structural ring promoted by the contraction of the oxygen skeleton can repeatedly cause the formation of H₃O⁺ and OH^– ions.     

Standard thermodynamic functions and constants of the formation of Nd<Superscript>3+</Superscript> and Lа<Superscript>3+</Superscript> complexes with glycine in aqueous solutions at 298 K

The enthalpies of complexation of glycine (HGly^±) with Nd³⁺ and La³⁺ ions at 298.15 K and at an ionic strength of 0.5 (KNO3) are determined by means of calorimetry. The thermodynamic characteristics of the reactions of formation are calculated for NdGly²⁺, NdGly ₂ ⁺ , LaGly²⁺, and LaGly ₂ ⁺ complexes.     

A study of the hydrolysis of ZrF<Stack><Subscript>6</Subscript><Superscript>2−</Superscript></Stack> and the structure of intermediate hydrolysis products by <Superscript>19</Superscript>F and <Superscript>91</Superscript>Zr NMR in the 9.4 T field

The high-field ¹⁹F and ⁹¹Zr NMR method is used to study the hydrolysis and polycondensation of hexafluorozirconate ZrF₆²⁻ in aqueous and water-peroxide solutions. During hydrolysis in aqueous solutions only ZrF₆²⁻ and F⁻ ions were observed by NMR, however, in the water-peroxide medium, an intermediate product of hydrolysis ([F₅Zr-OO-ZrF₅]⁴⁻ dimer) was detected. The dimer structure is confirmed by ¹⁹F and ⁹¹Zr NMR. In high fields (¹⁹F NMR frequency > 200 MHz), the fluorine exchange between ZrF₆²⁻ and F⁻ is slow in the ¹⁹F NMR scale and has a multisite character.     

Separation of phosphorous by liquid–liquid extraction for the measurement of <Superscript>32</Superscript>P

Phosphorous containing radioisotope waste was separated and determined by liquid–liquid extraction method through liquid scintillation counter (LSC). In this process, ammonium phosphate was converted to phosphomolybdate (PMo) by the reaction of ammonium molybdate (Mo) in HCl solution (0.02 M) and maximum UV/VIS absorbance (λ_max) 218 nm was observed. The PMo solution was extracted with TOA (Tri-n-Octylamine)/xylene mixture and λ_max 290 nm was found for this organic layer. Absorbance of aqueous and organic layer was linear through concentration. The impurities such as Co, Cr, Gd, etc. remain in aqueous layer by treating with Mo which was determined by ICP-AES and AAS. The quenching correction curve for ³²P was calculated using LSC results. No counting change was observed as the volume of quenchers increased. The recovery was 98% and 81% for the extraction and separation process from the test using H₃³²PO₄ as standard tracer.     

Near-infrared DC approach by Bi<Superscript>3+</Superscript>–Yb<Superscript>3+</Superscript> co-doped YAG phosphor

Bi³⁺–Yb³⁺ ion pair co-doped YAG phosphors were successfully synthesized using conventional solid state reaction method varying the concentration of Yb³⁺ ions from 0.5 to 10 mol%. The optimum phosphors were characterized by powder X-ray diffraction (XRD), and surface morphology was studied with a scanning electronic microscope (SEM). The photoluminescence (PL) properties were studied with a spectrophotometers in near infrared (NIR) and ultraviolet visible (UV-Vis) regions. The synthesized phosphors can convert a photon of UV region (330 nm) into photons of NIR region (979 and 992 nm). The co-operative energy transfer (CET) was studied using a time decay curve and PL spectra. The theoretical value of quantum efficiency (QE) was calculated from steady time decay measurement, and the maximum efficiency approached up to 166.91 %. Hence, this phosphor could be used as a downconversion (DC) luminescent convertor in front of crystalline silicon solar cell (c-Si) panels to reduce heat loss due to spectral mismatch of the solar cells.     

Identification of Anionic Supramolecular Complexes of Sulfonamide Receptors with Cl<Superscript>−</Superscript>, NO<Stack><Subscript>3</Subscript><Superscript>−</Superscript></Stack>, Br<Superscript>−</Superscript>, and I<Superscript>−</Superscript> by APCI-MS

As part of a mass spectrometric investigation of the binding properties of sulfonamide anion receptors, an atmospheric pressure chemical ionization mass spectrometric (APCI-MS) method involving direct infusion followed by thermal desorption was employed for identification of anionic supramolecular complexes in dichloromethane (CH₂Cl₂). Specifically, the dansylamide derivative of tris(2-aminoethyl)amine (tren) (1), the chiral 1,3-benzenesulfonamide derivatives of (1R,2S)-(+)-cis-1-amino-2-indanol (2), and (R)-(+)-bornylamine, (3), were shown to bind halide and nitrate ions in the presence of (n−Bu)₄N⁺X⁻ (X⁻ = Cl⁻, NO₃⁻, Br⁻, I⁻). Solutions of receptors and anions in CH₂Cl₂ were combined to form the anionic supramolecular complexes, which were subsequently introduced into the mass spectrometer via direct infusion followed by thermal desorption. The anionic supramolecular complexes [M+X]⁻, (M=1–3, X⁻=Cl⁻, NO₃⁻, Br⁻, I⁻) were observed in negative mode APCI-MS along with the deprotonated receptors [M−H]⁻. Full ionization energy of the APCI corona pin (4.5 kV) was necessary for obtaining mass spectra with the best signal-to-noise ratios.     

Experimental Determination of the Isotherm at 15°C of the System Mg<Superscript>2+</Superscript>/Cl<Superscript>−</Superscript>, SO<Subscript>4</Subscript><Superscript>2</Superscript>–H<Subscript>2</Subscript>O

Summary.  The diagram of the ternary system Mg²⁺/Cl⁻, SO₄ ²⁻–H₂O was established at 15°C by means of analytical and conductimetric measurements. Three compounds were found in this diagram, which are MgSO₄·6H₂O, MgSO₄·7H₂O, and MgCl₂·6H₂O. The solubility field of MgSO₄·7H₂O is important whereas those of MgSO₄·6H₂O and MgCl₂·6H₂O are small. The compositions (mass-%) of the two invariant points determined by the two methods are: MgSO₄:MgCl₂=2.73:33.80 and MgSO₄: MgCl₂=3.38:28.91. Both the measured and the calculated isotherm at 15°C have been used for modelling of the diagram Mg²⁺/Cl⁻, SO₄ ²⁻–H₂O between 0 and 35°C. The polythermal invariant point was approximately located between 15 and 10°C.  Corresponding author. E-mail: ariguib@planet.tn Received October 16, 2002; accepted (revised) December 3, 2002 Published online April 24, 2003 RID="a" ID="a" Dedicated to Prof. Dr. Heinz Gamsj?ger on the occasion of his 70^th birthday     

Optimization of the labeling yield by determination of the Cu<Superscript>+</Superscript>–acetonitrile complex constant in Cu<Superscript>+</Superscript>-catalyzed nucleophilic exchange reactions in mixed solvent conditions

To apply the Cu⁺-assisted nucleophilic exchange based radioiodination of aromatic compounds for more lipophilic compounds the reaction is carried out in mixed solvent conditions. Due to its physicochemical properties acetonitrile is an attractive solvent. Although acetonitrile forms complexes with Cu⁺ decreasing the labeling yield. This article describes a method for the determination of the complex constant at labeling temperature based on a Lineweaver–Burk approach, relating the reaction rate constant and the concentration of precursor in presence of different amounts of acetonitrile. The method also allows to calculate the adjusted amount of copper salt in order to obtain the same high labeling yield as obtained in absence of acetonitrile.     

Strong visible up-conversion emissions and thermometric applications of Er<Superscript>3+</Superscript>–Yb<Superscript>3+</Superscript> codoped Al<Subscript>2</Subscript>O<Subscript>3</Subscript> prepared by the sol–gel method

The Er³⁺–Yb³⁺ codoped Al₂O₃ has been prepared by the sol–gel method using the aluminium isopropoxide [Al(OC₃H₇)₃]-derived Al₂O₃ sols with addition of the erbium nitrate [Er(NO₃)₃ · 5H₂O] and ytterbium nitrate [Yb(NO₃)₃ · 5H₂O]. The phase structure, including only two crystalline types of doped Al₂O₃ phases, θ and γ, was obtained for the 1 mol% Er³⁺ and 5 mol% Yb³⁺ codoped Al₂O₃ at the sintering temperature of 1,273 K. By a 978 nm semiconductor laser diodes excitation, the visible up-conversion emissions centered at about 523, 545, and 660 nm were obtained. The temperature dependence of the green up-conversion emissions was studied over a wide temperature range of 300–825 K, and the reasonable agreement between the calculated temperature by the fluorescence intensity ratio (FIR) theory and the measured temperature proved that Er³⁺–Yb³⁺ codoped Al₂O₃ plays an important role in the application of high temperature sensor.     

Thermodynamics of the formation of Cu<Superscript>2+</Superscript>–glycyl-glycyl-glycine complex in water–ethanol solutions at 298 K

The stability constants of monoligand complexes of copper(II) ions with glycyl-glycyl-glycine zwitterions (triglycine, HL^±) and triglycinate ions (L^?) in a water–ethanol solvent with 0.0, 0.1, 0.3, and 0.5 mole fractions of ethanol at an ionic strength of 0.1 created by sodium perchlorate and temperature Т = 298.15 K are determined by means of potentiometric titration. It is found that an increase of ethanol content improves the stability of the investigated complexes, due mainly to the resolvation of ligands.     

Associative ionization reaction N + O → NO<Superscript>+</Superscript> + e<Superscript>–</Superscript> in slow collisions of atoms

The endothermic associative ionization reaction N(²D) + O(³P) → NO** → NO(¹Σ⁺) +e^- in slow collisions of the atoms has been considered in terms of the multichannel quantum defect theory. The dependences of the partial and total cross sections of the reaction on the energy of the colliding atoms in the range of 0–0.3 eV have been calculated. It has been shown that the cross sections have a pronounced resonance structure, which is formed as a result of the multichannel interaction of autoionization states of the intermediate Rydberg complex NO** with dissociative states. The temperature dependence of the reaction rate constant is presented. The results are compared with those of other calculations and available experimental data.     

Theoretical evaluation of the radiative lifetimes of LiCs and NaCs in the A<Superscript>1</Superscript>Σ<Superscript>+</Superscript> state

Calculations of the adiabatic potential energy curves and the transition dipole moments between the ground (A¹Σ⁺) and the first excited (A¹Σ⁺) states have been determined for the LiCs and NaCs molecules. The calculations are performed using an ab initio approach based on non-empirical pseudopotentials for Cs⁺, Li⁺ and Na⁺ cores, parameterized l-dependent polarization potentials and full configuration interaction calculations. The potential energy curves and the transition dipole moment are used to estimate the radiative lifetimes of the vibrational levels of the A⁺Σ⁺ state using the Franck–Condon (FC) approximation and the approximate sum rule method. The radiative lifetimes associated with the A⁺Σ⁺ state are presented here for the first time. These data can help experimentalists to optimize photoassociative formation of ultracold molecules and their longevity in a trap or in an optical lattice.     

Enthalpy of solution of VOCl<Subscript>3</Subscript> in dilute sodium hydroxide solutions and the standard enthalpy of formation of the HVO<Stack><Subscript>4</Subscript><Superscript>2−</Superscript></Stack> ion

The calorimetric enthalpies of solution of liquid vanadium oxytrichloride in dilute sodium hydroxide solutions were measured at 298.15 K and ionic strengths I = 0.5, 1.0, or 1.5 (NaClO₄). The standard enthalpy of formation of the HVO ₄ ^2? ion was calculated from the measured data.