高度分散的Pt/TiO2的制备及光催化活性

用柠檬酸作为空穴捕获剂和分散剂, 在温和条件下用光催化还原法将3 nm金属铂沉积在7 nm的锐钛矿相及介孔二氧化钛纳米晶表面. TEM观察显示铂的负载量为w＝1.0%时, 多数二氧化钛纳米晶表面沉积了岛状的铂团簇, XPS和电子衍射结果表明铂以游离态存在. 负载w＝1.0%～2.0%铂的TiO₂在苯酚光氧化反应中活性显著提高. Pt/TiO₂在氨气中经550 ℃氮化, 可制得氮掺杂的Pt/TiO₂可见光光催化剂, 氮化过程中铂团簇没有烧结和显著长大.     

Microstructure and hydrogen production activity of Pt–TiO2 prepared by precipitation–photodeposition

A series of Pt–TiO₂ photocatalysts were prepared by a facile precipitation–photoreduction method under different pH conditions, using H₂PtCl₆ as platinum precursor. The microstructure and chemical state of Pt loaded on the surface of TiO₂ were analyzed by X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). It was revealed that the size and distribution of Pt nanoparticles on TiO₂ surface is closely related to the initial pH of H₂PtCl₆ solution. The optimal pH value for forming highly dispersed Pt nanoparticles is 12. The photocatalytic activities of the prepared samples were investigated in terms of hydrogen production. The results indicated that the Pt–TiO₂ sample prepared by precipitation–photodeposition method shows much higher activity than that prepared by traditional photodeposition method.     

Facile Synthesis of Three‐Dimensional Pt‐TiO2 Nano‐networks: A Highly Active Catalyst for the Hydrolytic Dehydrogenation of Ammonia–Borane

Three‐dimensional (3D) porous metal and metal oxide nanostructures have received considerable interest because organization of inorganic materials into 3D nanomaterials holds extraordinary properties such as low density, high porosity, and high surface area. Supramolecular self‐assembled peptide nanostructures were exploited as an organic template for catalytic 3D Pt‐TiO₂ nano‐network fabrication. A 3D peptide nanofiber aerogel was conformally coated with TiO₂ by atomic layer deposition (ALD) with angstrom‐level thickness precision. The 3D peptide‐TiO₂ nano‐network was further decorated with highly monodisperse Pt nanoparticles by using ozone‐assisted ALD. The 3D TiO₂ nano‐network decorated with Pt nanoparticles shows superior catalytic activity in hydrolysis of ammonia–borane, generating three equivalents of H₂.     

Photodecomposition of ammonia to dinitrogen and dihydrogen on platinized TiO2 nanoparticules in an aqueous solution

By using suspended platinized titanium dioxide (Pt-TiO₂) as a photocatalyst in an NH₃ aqueous solution, NH₃ was photodecomposed into H₂ and N₂. The amount of loaded Pt was changed between 0 and 2.0 wt% and the reaction was conducted under irradiation in an Ar atmosphere. In the Pt loading between 0 and 0.5 wt% the H₂ and N₂ evolution increased linearly with the Pt amount and the H₂/N₂ molar ratio was about 3:1. The evolution of H₂ and N₂ reached a maximum at 0.5 wt% Pt, and then decreased probably due to a filter effect by the Pt. The effect of pH on the photodecomposition of NH₃ in the presence of Pt-TiO₂ under Ar was investigated at pH from 0.68 to 13.7. The evolution of H₂ increased steeply at the pH from 9 to 10 showing that the dissociation of NH₄⁺ to free NH₃ is important for the photodecomposition (pK_a of NH₄⁺/NH₃ is 9.24). The time-course of H₂ and N₂ evolution in a 59 mM NH₃ aqueous solution during 53 h irradiation gave the photodecomposition yield of 21.6%. The effect of RuO₂ loading as a co-catalyst for the TiO₂ or Pt-TiO₂ was investigated showing that the RuO₂ does not work as a H⁺ reduction catalyst. The activity of SrTiO₃ used instead of TiO₂ was only small, and the H₂/N₂ ratio (0.64) was very small showing that the Pt-SrTiO₃ is not a good photocatalyst to decompose NH₃. A TiO₂/FTO nanoporous film photoanode was used in combination with a Pt counter electrode instead of the Pt-TiO₂ photocatalyst, leading also to photodecomposition of NH₃ to produce H₂ and N₂ at 3:1 ratio.     

Mesoporous Pt-SiO2 and Pt-SiO2-Ta2O5 catalysts prepared using Pt colloids as templates.

Sol‐gel synthesis of silica and silica–tantalum oxide embedded platinum nanoparticles is carried out using Pt colloids as templates. These colloids are prepared by reduction with Na[AlEt₃H] and stabilized with different ligands (ammonium halide derivatives, non‐ionic surfactants with polyether chains, and 2‐hydroxy‐propionic acid). The aim of the present study is to prepare mesoporous silica embedded Pt colloids combining the “precursor concept” with the model of catalyst preparation using preformed spheres. Nanoparticles of Pt incorporated in high surface area mesoporous materials are formed after calcination. Further, it is observed that calcination of these catalysts causes partial aggregation and oxidation of the parent colloids, a process that is largely dependent on the nature of the stabilizing ligands. Several methods have been used for characterization of these materials: adsorption‐desorption isotherms at 77 K, H₂ chemisorption, X‐ray diffraction(XRD), ²⁹Si and ¹³C magic angle spinning (MAS) NMR, ammonia diffuse reflectance Fourier transform infrared spectroscopy (NH₃‐DRIFT), transmission electron microscopy (TEM), and X‐ray photoelectron spectroscopy (XPS). It is found that both metal oxide systems exhibit Brønsted acidity (weaker for silica and quite strong for silica–tantalum oxide). In addition, NH₃‐DRIFT experiments demonstrate the oxidative properties of the surface. Part of the adsorbed NH₄⁺ species is oxidized to N₂O. Testing these catalysts in the reduction of NO and NO₂ with isopentane under lean conditions indicate that the activity of these catalysts is indeed dependent on the size of the platinum particles, with those of size 8–10 nm demonstrating the best results. The support likely contributes to this effect, particularly after Ta incorporation into silica.     

Pulsed electrodeposition of Pt nanoclusters on carbon nanotubes modified carbon materials using diffusion restricting viscous electrolytes

A simple method for achieving high dispersion and small platinum nanoparticles down to only 2 or 3 nm on structured carbon supports (carbon nanotubes-modified PAN-based carbon fiber and carbon nanotubes-modified graphite foil) is presented. Pulsed electrodeposition of Pt nanoparticles was performed at increased viscosity of the H₂PtCl₆ containing electrolyte by addition of glycerol. The catalyst nanoparticle size can be controlled by varying the amount of glycerol added into the aqueous H₂PtCl₆ solution, and adjusting the number of the potential pulses. The shape and size of the Pt nanoparticles was characterized by scanning electron microscopy and transmission electron microscopy. The electrocatalytic properties of Pt nanoparticles with respect to O₂ and H₂O reduction were investigated by means of cyclic voltammetry, and the improved catalytic activity of the Pt nanoparticles/carbon nanotubes surfaces could be proved.     

Greatly Improving Electrochemical N2 Reduction over TiO2 Nanoparticles by Iron Doping

Titanium‐based catalysts are needed to achieve electrocatalytic N₂ reduction to NH₃ with a large NH₃ yield and a high Faradaic efficiency (FE). One of the cheapest and most abundant metals on earth, iron, is an effective dopant for greatly improving the nitrogen reduction reaction (NRR) performance of TiO₂ nanoparticles in ambient N₂‐to‐NH₃ conversion. In 0.5 m LiClO₄, Fe‐doped TiO₂ catalyst attains a high FE of 25.6 % and a large NH₃ yield of 25.47 μg h^?1 mg_cat^?1 at ?0.40 V versus a reversible hydrogen electrode. This performance compares favorably to those of all previously reported titanium‐ and iron‐based NRR electrocatalysts in aqueous media. The catalytic mechanism is further probed with theoretical calculations.     

Three-Dimensional Pinecone-like Binder-Free Pt–TiO2 Nanorods on Ti Mesh Structures: Synthesis,Characterization and Electroactivity towards Ethanol Oxidation

We report here the synthesis of binderless and template-less three-dimensional (3D) pinecone-shaped Pt/TiO₂/Ti mesh structure. The TiO₂ hydrothermally synthesized onto Ti mesh is composed of a mixture of flower-like nanorods and vertically aligned bar-shaped structures, whereas Pt film grown by pulsed laser deposition displays a smooth surface. XRD analyses reveal an average crystallite size of 41.4 nm and 68.5 nm of the TiO₂ nanorods and Pt, respectively. In H₂SO₄ solution, the platinum oxide formation at the Pt/TiO₂/Ti mesh electrode is 180 mV more negative than that at the Pt/Ti mesh electrode, indicating that TiO₂ provides oxygeneous species at lower potentials, which will facilitate the removal of CO-like intermediates and accelerate an ethanol oxidation reaction (EOR). Indeed, the Pt/TiO₂/Ti mesh catalyst exhibits current activity of 1.19 mA towards an EOR at a remarkably superior rate of 4.4 times that of the Pt/Ti mesh electrode (0.27 mA). Moreover, the presence of TiO₂ as a support to Pt delivers a steady-state current of 2.1 mA, with an increment in durability of 6.6 times compared to Pt/Ti mesh (0.32 mA). Pt is chosen here as a benchmark catalyst and we believe that with catalysts that perform better than Pt, such 3D pinecone structures can be useful for a variety of catalytic or photoelectrochemical reactions.     

A Dewetted‐Dealloyed Nanoporous Pt Co‐Catalyst Formed on TiO2 Nanotube Arrays Leads to Strongly Enhanced Photocatalytic H2 Production

Pt nanoparticles are typically decorated as co‐catalyst on semiconductors to enhance the photocatalytic performance. Due to the low abundance and high cost of Pt, reaching a high activity with minimized co‐catalyst loadings is a key challenge in the field. We explore a dewetting‐dealloying strategy to fabricate on TiO₂ nanotubes nanoporous Pt nanoparticles, aiming at improving the co‐catalyst mass activity for H₂ generation. For this, we sputter first Pt‐Ni bi‐layers of controllable thickness (nm range) on highly ordered TiO₂ nanotube arrays, and then induce dewetting‐alloying of the Pt‐Ni bi‐layers by a suitable annealing step in a reducing atmosphere: the thermal treatment causes the Pt and Ni films to agglomerate and at the same time mix with each other, forming on the TiO₂ nanotube surface metal islands of a mixed PtNi composition. In a subsequent step we perform chemical dealloying of Ni that is selectively etched out from the bimetallic dewetted islands, leaving behind nanoporous Pt decorations. Under optimized conditions, the nanoporous Pt‐decorated TiO₂ structures show a>6 times higher photocatalytic H₂ generation activity compared to structures modified with a comparable loading of dewetted, non‐porous Pt. We ascribe this beneficial effect to the nanoporous nature of the dealloyed Pt co‐catalyst, which provides an increased surface‐to‐volume ratio and thus a more efficient electron transfer and a higher density of active sites at the co‐catalyst surface for H₂ evolution.     

Visible Light Photocatalytic Activity of Pt/N‐TiO2 towards Enhanced H2 Production from Water Splitting

Present work mainly focuses on experimental investigation to improvement of hydrogen production by water photoelectrolysis. An experimental facility was designed and constructed for visible light photocatalysis. A series of N‐TiO₂ photocatalysts impregnated with platinum on the surface of N‐TiO₂ were prepared. Hydrogen production upon irradiating aqueous Pt/N‐TiO₂ suspension with visible light was investigated. The shift in excitation wavelength of TiO₂ was 380 nm improved the yield of hydrogen production by N‐TiO₂ and Pt/N‐TiO₂. We used a 400 W mercury arc lamp combined with a 400 nm cutoff filter eliminating all the wavelengths under 400 nm. Pt/N‐TiO₂ material was characterized with TPR, reflective UV/Visible spectroscopy and TEM. The best hydrogen production rate obtained for this setup for N/Ti = 10, 0.05 wt% Pt/N‐TiO₂, through water splitting was about 772 μmolh^?1g^?1.     

Separate evolution of H2 and O2 from H2O on visible light-responsive TiO2 thin film photocatalysts prepared by an RF magnetron sputtering method

Visible light-responsive TiO₂ thin film photocatalysts (Vis-TiO₂) have been prepared on Ti metal foil (Vis-TiO₂/Ti) or ITO glass (Vis-TiO₂/ITO) substrates by a radio-frequency magnetron sputtering (RF-MS) method. The UV–Vis spectra as well as photoelectrochemical performance of Vis-TiO₂ were affected by various calcination treatments such as calcination in air or NH₃. Calcination treatment in NH₃ (1.0 × 10⁴ Pa, 673 K) was particularly effective in increasing the visible light absorption of Vis-TiO₂ as well as in enhancing its photoelectrochemical performance and photocatalytic activity. A novel Vis-TiO₂ thin film photocatalyst (Vis-TiO₂/Ti/Pt) was prepared by an RF-MS method where Vis-TiO₂ was deposited on one side of a Ti metal foil substrate and nanoparticles of Pt were deposited on the other side. The separate evolution of H₂ and O₂ from H₂O could be successfully achieved by using an H-type glass cell consisting of two aqueous phases separated by Vis-TiO₂/Ti/Pt and a proton-exchange membrane. It was found that the rate of the separate evolution of H₂ and O₂ was also dramatically enhanced by calcination treatment of Vis-TiO₂ in NH₃.     

Formation of polyaniline/Pt nanoparticle composite films and their electrocatalytic properties

Polyaniline (PANI) thin films modified with platinum nanoparticles have been prepared by several methods, characterised and assessed in terms of electrocatalytic properties. These composite materials have been prepared by the in situ reduction of a platinum salt (K₂PtCl₄) by PANI, in a variety of solvents, resulting in the formation of platinum nanoparticles and clusters of different sizes. The further deposition of platinum clusters at spin cast thin films of PANI/Pt composites from a neutral aqueous solution of K₂PtCl₄ has also been demonstrated. Thin-film electrodes prepared from these materials have been investigated for their electrocatalytic activity by studying hydrazine oxidation and dichromate reduction. The properties of the composite materials have been determined using UV–visible spectroscopy, atomic force microscopy and transmission electron microscopy. The nature of the material formed is strongly dependent on the solvent used to dissolve PANI, the method of preparation of the PANI/Pt solution and the composition of the spin cast thin film before subsequent deposition of platinum from the aqueous solution of K₂PtCl₄.Dedicated to Professor Dr. Alan Bond on the occasion of his 60th birthday.     

组合型Pt/TiO_2催化剂用于低温催化甲苯完全氧化

将均匀分布的纳米Pt粒子直接吸附到TiO2载体上,即制得了组合型Pt/TiO2催化剂(Pt/TiO2-AS).与浸渍法制备的Pt/TiO2催化剂(Pt/TiO2-WI)比较,Pt/TiO2-AS催化剂在催化甲苯完全氧化反应中表现出了很好的催化性能,甲苯转化率为100%时的反应温度低至150°C,而且即使在较高甲苯浓度和较高气体空速下,该催化剂也能保持较好的催化性能.通过X射线衍射(XRD)、N2吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、氢气程序升温还原(H2-TPR)及傅里叶变换红外(FTIR)光谱等对两种Pt/TiO2催化剂的结构和表面性能进行了表征.结果表明组合型Pt/TiO2-AS催化剂粒径小(2.5 nm),活性组分主要以Pt0形式存在且分布在载体表面,而且载体表面Ti―O键活化使催化剂具有较强的催化氧化能力.另外,活性中心的价态变化(Pt0→Ptδ+)是导致Pt/TiO2-AS催化剂失活的主要原因.     

Metal–Organic Framework (MOF) Template Based Efficient Pt/ZrO2@C Catalysts for Selective Catalytic Reduction of H2 Below 90 °C

Selective catalytic reduction (SCR) of NO_x with H₂ as a reductant is the most promising denitration technology at low temperature. Achieving the conversion of NO_x into N₂ at ambient temperature not only prolongs the service life of the catalyst, but also provides more freedom for the arrangement of denitration units throughout the flue gas treatment equipment. However, the development of highly efficient, stable, and environmentally benign supported platinum‐based catalysts for H₂‐SCR at ambient temperature is still a major challenge. Herein, a 0.5 wt % Pt/ZrO₂@C catalyst, which was composed of carbon‐coated octahedral ZrO₂ with highly dispersed Pt particles, was prepared by using a new stabilization strategy based on UiO‐66‐NH₂ (a zirconium metal–organic framework) as a template. The catalytic performance of this Pt/ZrO₂@C in H₂‐SCR was tested and confirmed to achieve near 100 % NO_x conversion at 90 °C. Also, 70 % N₂ selectivity of the catalyst was achieved. The morphology, structure, and porous properties of the as‐synthesized nanocomposites were characterized by using data obtained from field‐emission SEM, TEM, XRD, Raman spectroscopy, thermogravimetric analysis, X‐ray photoelectron spectroscopy, and N₂ adsorption–desorption isotherms. The results show that residual carbon formed by pyrolysis treatment is coated on octahedral ZrO₂, and effectively prevents the agglomeration of platinum particles on the surface.     

Mixed Adenine/Guanine Quartets with Three trans‐a2PtII (a=NH3 or MeNH2) Cross‐Links: Linkage and Rotational Isomerism,Base Pairing,and Loss of NH3

Of the numerous ways in which two adenine and two guanines (N9 positions blocked in each) can be cross‐linked by three linear metal moieties such as trans‐a₂Pt^II (with a=NH₃ or MeNH₂) to produce open metalated purine quartets with exclusive metal coordination through N1 and N7 sites, one linkage isomer was studied in detail. The isomer trans,trans,trans‐[{Pt(NH₃)₂(N7‐9‐EtA‐N1)₂}{Pt(MeNH₂)₂(N7‐9‐MeGH)}₂][(ClO₄)₆] ? 3H₂O ( 1 ) (with 9‐EtA=9‐ethyladenine and 9‐MeGH=9‐methylguanine) was crystallized from water and found to adopt a flat Z‐shape in the solid state as far as the trinuclear cation is concerned. In the presence of excess 9‐MeGH, a meander‐like construct, trans,trans,trans‐[{Pt(NH₃)₂(N7‐9‐EtA‐N1)₂}{Pt(MeNH₂)₂(N7‐9‐MeGH)₂}][(ClO₄)₆] ? [(9‐MeGH)₂] ? 7 H₂O ( 2 ) is formed, in which the two extra 9‐MeGH nucleobases are hydrogen bonded to the two terminal platinated guanine ligands of 1 . Compound 1 , and likewise the analogous complex 1 a (with NH₃ ligands only), undergo loss of an ammonia ligand and formation of NH₄⁺ when dissolved in [D₆]DMSO. From the analogy between the behavior of 1 and 1 a it is concluded that a NH₃ ligand from the central Pt atom is lost. Addition of 1‐methylcytosine (1‐MeC) to such a DMSO solution reveals coordination of 1‐MeC to the central Pt. In an analogous manner, 9‐MeGH can coordinate to the central Pt in [D₆]DMSO. It is proposed that the proton responsible for formation of NH₄⁺ is from one of the exocyclic amino groups of the two adenine bases, and furthermore, that this process is accompanied by a conformational change of the cation from Z‐form to U‐form. DFT calculations confirm the proposed mechanism and shed light on possible pathways of this process. Calculations show that rotational isomerism is not kinetically hindered and that it would preferably occur previous to the displacement of NH₃ by DMSO. This displacement is the most energetically costly step, but it is compensated by the proton transfer to NH₃ and formation of U(?H⁺) species, which exhibits an intramolecular hydrogen bond between the deprotonated N6H^? of one adenine and the N6H₂ group of the other adenine. Finally the question is examined, how metal cross‐linking patterns in closed metallacyclic quartets containing two adenine and two guanine nucleobases influence the overall shape (square, rectangle, trapezoid) and the planarity of a metalated purine quartet.     

Selective Amplification of CO Bond Hydrogenation on Pt/TiO2: Catalytic Reaction and Sum‐Frequency Generation Vibrational Spectroscopy Studies of Crotonaldehyde Hydrogenation

The hydrogenation of crotonaldehyde in the presence of supported platinum nanoparticles was used to determine how the interaction between the metal particles and their support can control catalytic performance. Using gas‐phase catalytic reaction studies and in situ sum‐frequency generation vibrational spectroscopy (SFG) to study Pt/TiO₂ and Pt/SiO₂ catalysts, a unique reaction pathway was identified for Pt/TiO₂, which selectively produces alcohol products. The catalytic and spectroscopic data obtained for the Pt/SiO₂ catalyst shows that SiO₂ has no active role in this reaction. SFG spectra obtained for the Pt/TiO₂ catalyst indicate the presence of a crotyl‐oxy surface intermediate. By adsorption through the aldehyde oxygen atom to an O‐vacancy site on the TiO₂ surface, the C?O bond of crotonaldehyde is activated, by charge transfer, for hydrogenation. This intermediate reacts with spillover H provided by the Pt to produce crotyl alcohol.     

Removing Polyvinylpyrrolidone from Catalytic Pt Nanoparticles without Modification of Superficial Order

Herein, we report a simple methodology for cleaning Pt nanoparticles, prepared by a colloidal synthesis and coated with polyvinylpyrrolidone, without loss of crystalline surface structure. To prove the removal of the polyvinylpirrolidone from a Pt surface without disturbing the superficial order, a cleaning method using a solution of H₂O₂/H₂SO₄ was tested successfully for a Pt(111) single‐crystal electrode. The decontamination method was then tested for two different types of nanoparticles by mixing the suspension of nanoparticles with H₂O₂/H₂SO₄ and subsequent centrifugation. The resulting voltammetric profiles of platinum particles synthesized by the colloidal method employing PVP show a marked presence of the adsorption‐state characteristic of (111) ordered surface domains. The presence of the well‐ordered domains present on the surface of the nanoparticles was confirmed by using the irreversible adsorption of bismuth, tellurium and germanium.     

Analogues of Cis‐ and Transplatin with a Rich Solution Chemistry: cis‐[PtCl2(NH3)(1‐MeC‐N3)] and trans‐[PtI2(NH3)(1‐MeC‐N3)]

Mono(nucleobase) complexes of the general composition cis‐[PtCl₂(NH₃)L] with L=1‐methylcytosine, 1‐MeC ( 1 a ) and L=1‐ethyl‐5‐methylcytosine, as well as trans‐[PtX₂(NH₃)(1‐MeC)] with X=I ( 5 a ) and X=Br ( 5 b ) have been isolated and were characterized by X‐ray crystallography. The Pt coordination occurs through the N3 atom of the cytosine in all cases. The diaqua complexes of compounds 1 a and 5 a , cis‐[Pt(H₂O)₂(NH₃)(1‐MeC)]²⁺ and trans‐[Pt(H₂O)₂(NH₃)(1‐MeC)]²⁺, display a rich chemistry in aqueous solution, which is dominated by extensive condensation reactions leading to μ‐OH‐ and μ‐(1‐MeC^?‐N3,N4)‐bridged species and ready oxidation of Pt to mixed‐valence state complexes as well as diplatinum(III) compounds, one of which was characterized by X‐ray crystallography: h,t‐[{Pt(NH₃)₂(OH)(1‐MeC^?‐N3,N4)}₂](NO₃)₂ ? 2 [NH₄](NO₃) ? 2 H₂O. A combination of ¹H NMR spectroscopy and ESI mass spectrometry was applied to identify some of the various species present in solution and the gas phase, respectively. As it turned out, mass spectrometry did not permit an unambiguous assignment of the structures of +1 cations due to the possibilities of realizing multiple bridging patterns in isomeric species, the occurrence of different tautomers, and uncertainties regarding the Pt oxidation states. Additionally, compound 1 a was found to have selective and moderate antiproliferative activity for a human cervix cancer line (SISO) compared to six other human cancer cell lines.     

Visible‐Light Photocatalytic Hydrogen Production Activity of ZnIn2S4 Microspheres Using Carbon Quantum Dots and Platinum as Dual Co‐catalysts

ZnIn₂S₄ microspheres (ZIS MSs) were for the first time decorated with carbon quantum dots (CQDs) and platinum nanoparticles (NPs) as dual co‐catalysts of for photocatalytic H₂ production. The ZIS MSs co‐loaded with CQDs and Pt exhibited a high photocatalytic H₂ production rate of 1032.2 μmol h^?1 g^?1 with an apparent quantum efficiency of 2.2 % (420 nm) in triethanolamine aqueous solution under visible‐light irradiation, which was much higher than the respective photocatalytic rates of pure ZIS, Pt loaded ZIS, and CQDs‐decorated ZIS. Such a great enhancement was attributed to the integrative effect of good crystallization, enhanced light absorption, high electrical conductivity of CQDs, and the vectorial electron transfer from ZIS to CQDs and Pt NPs (ZIS→CQDs→Pt).     

Unravelling the Promotional Effect of La2O3 in Pt/La-TiO2 Catalysts for CO2 Hydrogenation

This work reports the preparation of a La₂O₃-modified Pt/TiO₂ (Pt/La-TiO₂) hybrid through an excess-solution impregnation method and its application for CO₂ hydrogenation catalysis. The Pt/La-TiO₂ catalyst is characterized by XRD, H₂ temperature-programmed reduction (TPR), TEM, X-ray photoelectron spectroscopy (XPS), Raman, EPR, and N₂ sorption measurements. The Pt/La-TiO₂ composite starts to catalyze the CO₂ conversion reaction at 220 °C, which is 30 °C lower than the Pt/TiO₂ catalyst. The generation of CH₄ and CO of Pt/La-TiO₂ is 1.6 and 1.4 times greater than that of Pt/TiO₂. The CO₂ temperature-programmed desorption (TPD) analysis confirms the strengthened CO₂ adsorption on Pt/La-TiO₂. Moreover, the in situ FTIR experiments demonstrate that the enhanced CO₂ adsorption of Pt/La-TiO₂ facilitates the formation of the active Pt–CO intermediate and subsequently boosts the evolution of CH₄ and CO. The cycling tests reveal that Pt/La-TiO₂ shows reinforced stability for the CO₂ hydrogenation reaction because the La species can prevent Pt nanoparticles (NPs) from sintering. This work may provide some guidance on the development new rare-metal-modified hybrid catalysts for CO₂ fixation.