Functionalized Alkynylplatinum(II) Polypyridyl Complexes for Use as Sensitizers in Dye‐Sensitized Solar Cells

A series of platinum(II) alkynyl‐based sensitizers has been synthesized and found to show light‐to‐electricity conversion properties. These dyes were developed as sensitizers for the application in nanocrystalline TiO₂ dye‐sensitized solar cells (DSSCs). Their photophysical and electrochemical properties were studied. The excited‐state property was probed using nanosecond transient absorption spectroscopy, which showed the formation of a charge‐separated state that arises from the intramolecular photoinduced charge transfer from the platinum(II) alkynylbithienylbenzothiadiazole moiety (donor) to the polypyridyl ligand (acceptor). A lifetime of 3.4 μs was observed for the charge‐separated state. A dye‐sensitized solar cell based on one of the complexes showed a short‐circuit photocurrent of 7.12 mA cm^?2, an open circuit voltage of 780 mV, and a fill factor of 0.65, thus giving an overall power conversion efficiency of 3.6 %.     

New Bithiazole‐Based Sensitizers for Efficient and Stable Dye‐Sensitized Solar Cells

A series of new push–pull organic dyes ( BT‐I – VI ), incorporating electron‐withdrawing bithiazole with a thiophene, furan, benzene, or cyano moiety, as π spacer have been synthesized, characterized, and used as the sensitizers for dye‐sensitized solar cells (DSSCs). In comparison with the model compound T1 , these dyes containing a thiophene moiety between triphenylamine and bithiazole display enhanced spectral responses in the red portion of the solar spectrum. Electrochemical measurement data indicate that the HOMO and LUMO energy levels can be tuned by introducing different π spacers between the bithiazole moiety and cyanoacrylic acid acceptor. The incorporation of bithiazole substituted with two hexyl groups is highly beneficial to prevent close π–π aggregation, thus favorably suppressing charge recombination and intermolecular interaction. The overall conversion efficiencies of DSSCs based on bithiazole dyes are in the range of 3.58 to 7.51 %, in which BT‐I ‐based DSSCs showed the best photovoltaic performance: a maximum monochromatic incident photon‐to‐current conversion efficiency (IPCE) of 81.1 %, a short‐circuit photocurrent density (J_sc) of 15.69 mA cm^?2, an open‐circuit photovoltage (V_oc) of 778 mV, and a fill factor (ff) of 0.61, which correspond to an overall conversion efficiency of 7.51 % under standard global AM 1.5 solar light conditions. Most importantly, long‐term stability of the BT‐I – III ‐based DSSCs with ionic‐liquid electrolytes under 1000 h of light soaking was demonstrated and BT‐II with a furan moiety exhibited better photovoltaic performance of up to 5.75 % power conversion efficiency.     

Photovoltaic Performance of Triphenylamine Dyes-sensitized Solar Cells Employing Cobalt Redox Shuttle and Influence of π-conjugated Spacers

Developing photosensitizers suitable for the cobalt electrolyte and understanding the structure-property relationship of organic dyes is warranted for the dye-sensitized solar cells (DSSCs). The DSSCs incorporating tris(1,10-phenanthroline)cobalt(II/III)-based redox elec-trolyte and four synthesized organic dyes as photosensitizers are described. The photovoltaic performance of these dyes-sensitized solar cells employing the cobalt redox shuttle and the influences of the π-conjugated spacers of organic dyes upon the photovoltage and photocur-rent of mesoscopic titania solar cells are investigated. It is found that organic dyes with thiophene derivates as linkers are suitable for DSSCs employing cobalt electrolytes. DSSCs sensitized with the as-synthesized dyes in combination with the cobalt redox shuttle yield an overall power conversion efficiency of 6.1% under 100 mW/cm² AM1.5 G illumination.     

Novel Iron-Based Polynuclear Metal Complexes [FeII(L)(CN)4]2–[FeIII(H2O)3Cl]2: Synthesis and Study of Photovoltaic Properties for Dye-Sensitized Solar Cell

A series of novel polynuclear iron-based photosensitizers (1–3) with cyano-bridged to form a molecular square were synthesized and their optical, electrochemical, and photovoltaic properties were investigated. The modification of anchoring groups with 4,4'-dicarboxy-2,2'-bipyridine, 2,2'-bipyridine, and 4,4'-dimethoxy-2,2'-bipyridine does not show significant changes on the both absorption and electrochemical properties of these iron-based dyes. This indicates that the polynuclear iron-based photosensitizers have better flexibility to regulate their physical properties of solubility, surface absorption, and thin-film formation for device preparation. The polynuclear new dyes show power conversion efficiencies ranged from 0.43 to 0.48% that is almost the best system among the published iron-based photosensitizers. These iron-based dyes were able to chemisorb on TiO₂ surface efficiently and then promoting electron injection and photocurrent generation in a dye-sensitized solar cell with solar irradiation.

     

Molecular design of corrole‐based D‐π‐A sensitizers for dye‐sensitized solar cell applications

First principles calculations based on density functional theory (DFT) have been performed to design a new set of donor‐corrole‐bridge‐acceptor type systems based on the gallium corroles for dye‐sensitized solar cell applications. The design strategy for these systems is based on the benchmark studies done on the experimentally tested aluminum, gallium, and tin metallocorroles. Unfortunately, corrole analogues display poor light to current conversion efficiencies in spite of their desirable photophysical properties. Thus, improving the efficiency of corrole analogues has become a major challenge and ways to identify solutions to this is of outstanding fundamental importance. This study shows the lack of charge directionality toward anchoring group as plausible reason for the poor efficiencies of reported corrole systems, which enabled us to fine‐tune the electronic and optical properties of new D‐π‐A type systems, COR1‐COR4. The molecular geometries, electronic structure, and binding orientation of these systems on TiO₂ surface were investigated using DFT, TD‐DFT, and PBC methods. When compared with the reported corroles, COR1‐COR4 have a smaller band gaps, red‐shifted absorption spectra with higher extinction coefficients (10⁵ M^?1 cm^?1) and improved nonlinear optical properties. Importantly, results revealed that these dyes bind with two‐arm mode to TiO₂ surface and the density of states of the dye@TiO₂ elucidate strong coupling between the dyes and TiO₂ surface. We anticipate that the unique photophysical properties of these sensitizers will trigger the experimental efforts to yield a new generation of sensitizers based on corrole macrocyle. © 2015 Wiley Periodicals, Inc.     

Computational studies on the spectroscopic properties of the 2‐pyridylpyrazolate‐based platinum(II) complexes with modified pyrazolate fragment

Electronic structures and spectroscopic properties of a series of platinum(II) complexes based on the 2‐pyridylpyrazolate ligand with modified pyrazolate fragment have been studied by the time‐dependent density functional theory (TD‐DFT) calculations. The ground‐ and excited‐state structures were optimized by the DFT and single‐excitation configuration interaction (CIS) methods, respectively. The calculated structures and spectroscopic properties are in agreement with the corresponding experimental results. The results of the spectroscopic investigations revealed that the lowest‐energy absorptions have ^1,3MLCT/^1,3ILCT mixing characters. When the electron‐withdrawing groups (? CF₃, ? C₃F₇) are introduced into the pyrazolate fragment, the lowest‐energy absorptions are blue‐shifted compared with that without substituents on the pyrazolate fragment, while the opposite case is observed for the electron‐donating groups (? Me, ? ^tBu, etc.). Otherwise, the phosphorescent emissions of these complexes have the ³MLCT/³ILCT character and should be originated from the lowest‐energy absorptions. When the pyrazolate fragment is replaced by the indazole group, the HOMO and LUMO orbitals of the pyridyl‐indazolate ligand platinum(II) complexes have obvious π and π* orbital characters. Therefore, there is no evident MLCT character in the lowest energy absorption and emission. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2009     

Bis(5,7‐dimethyl‐8‐hydroxyquinolinato)platinum(II) Complex for Efficient Organic Heterojunction Solar Cells

Organic photovoltaic (OPV) cells using metal(II) (Pt, Pd, Cu, and Ni) chelates of 8‐hydroxyquinoline (Hq) or 5,7‐dimethyl‐8‐hydroxy‐quinoline (HMe₂q) as an electron donor were fabricated by vacuum deposition. The bis(5,7‐dimethyl‐8‐hydroxyquinolinato)platinum(II) [Pt(Me₂q)₂]‐based OPVs showed the best performance with an open voltage (V_OC) of 0.42 V, a short circuit current density (J_SC) of 14.8 mA cm^?2, and a maximum power conversion efficiency (η_P) of 2.4 %. The X‐ray single‐crystal structures together with the grazing incidence X‐ray diffraction (GIXRD) data of thin film samples reveal that the peripheral methyl substituent(s) and platinum(II) ion are essential for the high degree of film crystallinity resulting in improved performance of the as‐fabricated field‐effect transistors (FETs) and OPV cells.     

The Influence of Substituent Orientation on the Photovoltaic Performance of Phthalocyanine‐Sensitized Solar Cells

Phthalocyanines (Pcs) are used as sensitizers in dye‐sensitized solar cells (DSSCs) because of their stability and intense absorption in the red and near‐IR regions. Impressive progress has been made in photovoltaic efficiencies by introduction of bulky peripheral substituents to help suppress macrocycle aggregation. To reach benchmark efficiencies reported for other related dyes, new designs need to be explored. Single carboxy‐ZnPc regioisomers substituted at the non‐peripheral positions by rigid aryl groups have now been studied, which has shed light on the influence of steric hindrance and/or orientation of the substituent around the anchoring group on the photovoltaic response. The regioisomer bearing the aryl group far away from the anchoring group produces a more effective sensitization of the TiO₂ films and higher short‐circuit photocurrent density (J_sc). Taking advantage of the good photovoltaic performance in the near‐IR region of this ZnPc, it was combined with another appropriate dye for panchromatic sensitization of the mesoporous photoelectrode and an increase of the overall device efficiency.     

Effect of organic dye on the performance of dye-sensitized solar cell utilizing TiO2 nanostructure films synthesized via CTAB-assisted liquid phase deposition technique

This work is concerned with the growth of TiO₂ nanostructures as photovoltaic materials of dyesensitized solar cell (DSSC) via phase liquid deposition technique treated with CTAB surfactant. This work investigates the influence of organic dyes, N719, N3 and Z907 as photosensitizer on the photovoltaic parameters of TiO₂ nanostructures dye-sensitized solar cells (DSSCs). It also highlights the effect of the concentration of the best dye, N719 on the performance of the cell. The platinum films as counter electrode of the DSSC were prepared by sputtering platinum pellet on ITO substrate. The redox couple of the electrolyte utilized in the DSSC was iodide/triiodide. The cell sensitized with N719 dye demonstrated the best performance compared with the cell sensitized with another two dyes, N3 and Z907. This is due to N719 dye possess the highest optical absorption in visible region. The cell sensitized with 0.8 mM N719 dye performs the highest short-circuit current density, J _sc and power conversion efficiency, η since it posses the highest absorption in visible region. The DSSC utilizing 0.8 mM N719 dye demonstrated the highest J _sc and η of 6.48 mA cm^?2 and 1.69%, respectively.     

Promising sensitizers for dye sensitized solar cells: A comparison of Ru(II) with other earth's scarce and abundant metal polypyridine complexes

There has recently been a growing interest in dye sensitized solar cells (DSSCs) based on ruthenium metal, but due to the scarcity and high price of ruthenium, design of better and cheaper light adsorbent dyes based on more abundant metal ions is one of the key issues for future development of the DSSCs. Using density functional theory (DFT) and time-dependent DFT we have studied the properties of new and abundant metal ion-based polypyridyl dyes for p-type DSSCs and compared with ruthenium and other scarce metal ions. Molecular geometries, electronic structures, and optical absorption spectra have been calculated using an implicit solvent corresponding to acetonitrile. The calculated fair light harvesting efficiency, high hole injection efficiency and Gibbs free energy for the hole injection and longer excited state lifetime (important for reflecting the efficiency of solar cells) for the new abundant metal ions (V³⁺ and Cr²⁺) based dyes could provide promising sensitizers for efficient next generation DSSC's for p-SC.     

Molecular Engineering of Boryl Oxasmaragdyrins through Peripheral Modification: Structure–Efficiency Relationship

Expanded porphyrins with the absorption profile down to the infrared region through increased π‐conjugation are suitable candidates for a low energy sensitizer. Oxasmaragdyrin boron complexes, a class of aromatic‐core‐modified expanded porphyrin with 22 π‐electrons, have been recently utilized as an efficient low energy sensitizer in dye‐sensitized solar cells. In this paper, we have prepared a series of eight novel boryl oxasmaragdyrins through molecular engineering on the periphery and their overall photovoltaic performances in dye‐sensitized solar cells are evaluated. With the help of photophysical, electrochemical, and photovoltaic studies, it is revealed that molecular structure, especially the number and position of the donor–acceptor groups play a pivotal role in their photovoltaic performance. Presence of the two well‐separated split Soret bands in the 400–500 nm region of UV/Vis spectrum ensures broader coverage of absorption wavelengths. Even though the two‐anchoring‐group dyes ( SM5 – SM8 ) bind strongly to TiO₂ compared to one‐anchoring‐group dyes ( SM1 – SM4 ), the latter have superior photovoltaic performance than the former. Dye SM1 , with two hexyloxyphenyl donors and one carboxylic acid anchor showed the best overall conversion efficiency of 4.36 % (J_SC=10.91 mA cm^?2; V_OC=0.59 V; FF=0.68). This effective modulation of photovoltaic performance through structural engineering of the dyes will serve as a guideline for the future design of efficient low energy light‐harvesting sensitizers.     

Recent Investigations on Thiocyanate-Free Ruthenium(II) 2,2′-Bipyridyl Complexes for Dye-Sensitized Solar Cells

Three decades ago, dye-sensitized solar cells (DSSCs) emerged as a method for harnessing the energy of the sun and for converting it into electricity. Since then, a lot of work has been devoted to create better global photovoltaic efficiencies and long term stability. Among photosensitizers for DSSCs, thiocyanate-free ruthenium(II) complexes have gained increasing interest due to their better stability compared to conventional thiocyanate-based complexes, such as benchmark dyes N719 and Z907. In this mini-review, two classes of thiocyanate-free Ru(II) complexes are presented: (a) bis-bipyridyl compounds bearing an ancillary cyclometalating bidentate ligand; (b) bipyridyl compounds bearing non-cyclometalating ancillary ligands. The coverage, mainly from 2014 up to now, is not exhaustive, but illustrates the most recent design strategies and photovoltaic properties of these two families of ruthenium(II) dyes.     

Dye‐sensitized solar cells based on zinc(II) phthalocyanines bearing 3‐pyridin‐3‐ylpropoxy anchoring groups

In this study, nonperipherally tetra‐substituted ( 2 ), peripherally tetra‐substituted ( 3 ), and peripherally octa‐substituted ( 4 ) zinc(II) phthalocyanines were synthesized as sensitizers for dye‐sensitized solar cells (DSSCs) in which 3‐pyridin‐3‐ylpropoxy substituent acts as anchoring unit to bind TiO₂ surface. The optical results indicated that there is an interaction between the dyes and the TiO₂ surface. The photovoltaic performances of the DSSCs based on these dyes were found to depend on both the position and number of the substituents. Despite the more red‐shifted absorption, the DSSC based on 2 showed the conversion efficiency of 0.68%, which is lower than 1.36% and 0.92% for 3 and 4 , respectively, under one sun (AM 1.5G). The vertical orientation of the dye on TiO₂ surface could be the main reason for the higher photovoltaic performance of complex 3 , which is beneficial for not only injecting the electrons into the conduction band of TiO₂ but also reducing the charge recombination. Overall, these results demonstrate that the peripherally tetra‐substituted 3‐pyridin‐3‐ylpropoxy zinc(II) phthalocyanine complex ( 3 ) as a sensitizer can more efficiently utilize the photons in the red/near‐infrared region with respect to the other complexes studied.     

Synthesis and photovoltaic properties of main chain polymeric metal complexes containing 1,10‐phenanthroline metal complexes conjugating alkyl fluorene or alkoxy benzene by C═C bridge for dye‐sensitized solar cells

Four main chain polymeric metal complexes (P1–P4) based on 1,10‐phenanthroline metal complexes via the Heck coupling have been synthesized and characterized by Fourier transform infrared spectroscopy, ¹H NMR, UV–Vis absorption, photoluminescence spectroscopy, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry, elemental analysis, and cyclic voltammetry. To investigate their photovoltaic properties, the dye‐sensitized solar cells based on these polymers dyes are studied, under the illumination of AM 1.5G, 100 mW/cm². The study results show the four polymers exhibit good thermally stable and the solar cells based on them have good device performance, and the maximum power conversion efficiency is up to 0.735% for the solar cells based on P3 with a short‐circuit current (J_sc) of 1.68 mA/cm² and an open‐circuit voltage (V_oc) of 0.62 V. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis and electronic energy‐level regulation of imide‐fused poly(thienylene vinylene) derivatives

A series of novel poly(thienylene vinylene) derivatives (PTVs), P20‐P24 , with imide substituents were designed and synthesized by palladium‐catalyzed Stille coupling polymerization, wherein the imide substituent density was decreased gradually, which allowed us to explicitly study the effect of electron‐deficient substituent on the optical, electrochemical, and photovoltaic properties of the PTVs. All of the four polymers showed broad absorption bands with optical bandgaps between1.66 and 1.78 eV. By reducing density of electron‐deficient imide group, the LUMO energy levels of the polymers could be tuned gradually from ?3.75 to ?3.43 eV, with HOMO levels upshifted from ?5.64 to ?5.16 eV. Bulk heterojunction solar cells with the polymers as donor and PC₇₁BM as acceptor demonstrated very different excitons dissociation behavior. With decreasing the imide‐fused unit density, the open‐circuit voltage (V_OC) values in the devices decreased from 0.78 to 0.62 V, whereas the short‐circuit currents (J_SC) increased from 0 to 2.26 mA cm^?2 and then decreased to 1.01 mA cm^?2. By adjusting the electron‐withdrawing imide substituent density, power conversion efficiency of the PTVs‐based solar cells can be increased to four times, reached 0.86%. To the best of our knowledge, this is the first systematic study of the relationship between molecular energy level and photovoltaic properties of PTVs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4975–4982     

Organic Dyes with Well‐Defined Structures for Highly Efficient Dye‐Sensitised Solar Cells Based on a Cobalt Electrolyte

Seven SGT organics dyes, containing bis‐dimethylfluoreneyl amino groups with a dialkoxyphenyl unit as an electron donor and a cyanoacrylic acid group as an anchoring group, connected with oligothiophenes, fused thiophenes and benzothiadiazoles as π‐bridges, were designed and synthesised for applications in dye‐sensitised solar cells (DSSCs). The photovoltaic performance of DSSCs based on organic dyes with oligothiophenes depends on the molecular structure of the dyes, in terms of the length change of the π‐bridging units. The best performance was found with a π‐bridge length of about 6 Å. To further enhance the photovoltaic performance associated with this concept, cyclopenta[1,2‐b:5,4‐b′]dithiophene (CPDT) and benzothiadiazole were introduced into the π‐bridge unit. As a result, the DSSC based on the organic dye containing the CPDT moiety showed the best photovoltaic performance with a short‐circuit photocurrent density (J_sc) of 14.1 mA cm^?2, an open‐circuit voltage (V_oc) of 0.84 V and a fill factor (FF) of 0.72, corresponding to an overall conversion efficiency (η) of 8.61 % under standard AM 1.5 irradiation.     

Influence of the Auxiliary Acceptor on the Absorption Response and Photovoltaic Performance of Dye‐Sensitized Solar Cells

Three new dyes with a 2‐(1,1‐dicyanomethylene)rhodanine (IDR‐ I , ‐ II , ‐ III ) electron acceptor as anchor were synthesized and applied to dye‐sensitized solar cells. We varied the bridging molecule to fine tune the electronic and optical properties of the dyes. It was demonstrated that incorporation of auxiliary acceptors effectively increased the molar extinction coefficient and extended the absorption spectra to the near‐infrared (NIR) region. Introduction of 2,1,3‐benzothiadiazole (BTD) improved the performance by nearly 50 %. The best performance of the dye‐sensitized solar cells (DSSCs) based on IDR‐ II reached 8.53 % (short‐circuit current density (J_sc)=16.73 mA cm^?2, open‐circuit voltage (V_oc)=0.71 V, fill factor (FF)=71.26 %) at AM 1.5 simulated sunlight. However, substitution of BTD with a group that featured the more strongly electron‐withdrawing thiadiazolo[3,4‐c]pyridine (PT) had a negative effect on the photovoltaic performance, in which IDR‐ III ‐based DSSCs showed the lowest efficiency of 4.02 %. We speculate that the stronger auxiliary acceptor acts as an electron trap, which might result in fast combination or hamper the electron transfer from donor to acceptor. This inference was confirmed by electrical impedance analysis and theoretical computations. Theoretical analysis indicates that the LUMO of IDR‐ III is mainly localized at the central acceptor group owing to its strong electron‐withdrawing character, which might in turn trap the electron or hamper the electron transfer from donor to acceptor, thereby finally decreasing the efficiency of electron injection into a TiO₂ semiconductor. This result inspired us to select moderated auxiliary acceptors to improve the performance in our further study.     

Generation and Characterization of the First Persistent Platinum(I)‐Centered Radical

The first persistent platinum(I)‐centered radical was generated by homolytic cleavage of a Pt?HgSiR₃ bond of a mercury‐substituted platinum(II) complex. The Pt^I radical was characterized by EPR spectroscopy, chemical trapping experiments, and density functional theory (DFT) calculations.     

A New Mussel‐Inspired Polydopamine Sensitizer for Dye‐Sensitized Solar Cells: Controlled Synthesis and Charge Transfer

The efficient electron injection by direct dye‐to‐TiO₂ charge transfer and strong adhesion of mussel‐inspired synthetic polydopamine (PDA) dyes with TiO₂ electrode is demonstrated. Spontaneous self‐polymerization of dopamine using dip‐coating (DC) and cyclic voltammetry (CV) in basic buffer solution were applied to TiO₂ layers under a nitrogen atmosphere, which offers a facile and reliable synthetic pathway to make the PDA dyes, PDA‐DC and PDA‐CV, with conformal surface and perform an efficient dye‐to‐TiO₂ charge transfer. Both synthetic methods led to excellent photovoltaic results and the PDA‐DC dye exhibited larger current density and efficiency values than those in the PDA‐CV dye. Under simulated AM 1.5 G solar light (100 mW cm^?2), a PDA‐DC dye exhibited a short circuit current density of 5.50 mW cm^?2, corresponding to an overall power conversion efficiency of 1.2 %, which is almost 10 times that of the dopamine dye‐sensitized solar cell. The PDA dyes showed strong adhesion with the nanocrystalline TiO₂ electrodes and the interface engineering of a dye‐adsorbed TiO₂ surface through the control of the coating methods, reaction times and solution concentration maximized the overall conversion efficiency, resulting in a remarkably high efficiency.     

Synthesis,characterization and optical properties of a new cationic cyclometalated platinum(ii) complex

The cyclometalated platinum (II) complex, [Pt(ppy)(ppyH)₂] OTF, 2 , in which ppy and ppyH denote the cyclometalated and non‐cyclometalated 2‐phenylpyridine ligand respectively, was prepared from the reaction of the platinum(IV) complex [PtMe₃(OTF)], 1 , with 3 equiv 2‐phenylpyridine at room temperature. The cyclometalated complex 2 was characterized using ¹H NMR spectroscopy. The solid state structure of 2 was further identified by single crystal X‐ray structure determination. 2 displays a green emission in solution and in solid state at room temperature and TD‐DFT calculations is used to elucidate the origin of the electronic transitions in the UV–vis spectrum of 2 .