Electrosynthesis of Chirality Conducting Poly[N‐(9‐fluorenylmethoxycarbonyl)‐L‐phenylalanine] with Good Blue Light‐Emitting Properties

Poly[N‐(9‐fluorenylmethoxycarbonyl)‐L‐phenylalanine] (PN9FPA) films with good fluorescence properties and chirality were prepared electrochemically by direct anodic oxidation of N‐(9‐fluorenylmethoxycarbonyl)‐L‐phenylalanine (N9FPA) in boron trifluoride diethyletherate (BFEE). Fourier transform infrared spectroscopy measurement showed that the polymerization of N9FPA occurred mainly at the C(2) and C(7) positions. The fluorescence spectra indicated that PN9FPA films were blue‐light emitters. In addition, the structures and properties of the monomer and the polymers were characterized and evaluated with CV, UV, TGA and SEM.     

Soluble and Green‐light‐emitting Oligo(9‐fluorenylideneacetic acid): Electrosynthesis and Characterization

A novel semiconducting oligo(9‐fluorenylideneacetic acid) (OFYA) with good redox activity and stability was successfully electrosynthesized by direct anodic oxidation of 9‐fluorenylideneacetic acid (FYA) in CH₂Cl₂ containing boron trifluoride diethyl etherate (BFEE) as the supporting electrolyte. The as‐formed OFYA film was readily soluble in dimethyl sulfoxide and tetrahydrofuran, and partly soluble in water, alcohol, acetonitrile and acetone. FT‐IR and ¹H NMR spectra, together with computational results proved that FYA was probably polymerized through the coupling at C(2) and C(7) positions. Further, OFYA was a typical green light‐emitter with maximal emission at 555 nm and its fluorescence quantum yield was distinctly improved in comparison with that of the monomer. The oligomer was also studied by UV‐vis spectroscopy, MALDL‐TOF mass spectrometry, and thermal analysis, respectively.     

Low potential electrosyntheses of free‐standing poly(dibenzofuran) films in mixed electrolytes of boron trifluoride diethyl etherate and trifluoroacetic acid

Free‐standing poly(dibenzofuran) (PDBF) films were synthesized electrochemically by direct anodic oxidation of dibenzofuran in mixed electrolytes of boron trifluoride diethyl etherate (BFEE) containing certain amount of trifluoroacetic acid (TFA). The oxidation potential of dibenzofuran in pure BFEE was measured to be only 1.31 V versus saturated calomel electrode (SCE). This value was much lower than that determined in acetonitrile + 0.1 mol L^?1 TBATFB (2.14 V vs. SCE). The addition of TFA to BFEE can further decrease the oxidation potential of the monomer to 1.07 V versus SCE in the mixed electrolyte of BFEE + 30% TFA. PDBF films obtained from this medium showed good electrochemical behavior, good electrochromic properties, and good thermal stability with conductivity of 10⁰ S cm^?1. FTIR and ¹H NMR spectra showed that the polymer was grown mainly via the coupling of the monomer at C₍₃₎ C₍₁₀₎ or C₍₄₎ C₍₉₎ positions (Scheme 1). As‐formed PDBF films were partly soluble in tetrahydrofuran (THF) or chloroform. Fluorescent spectral studies indicated that either soluble or PDBF in solid state was a good blue light PDBF emitter. To the best of our knowledge, this is the first report that free‐standing PDBF films can be electrodeposited. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1125–1135, 2006     

Electrosyntheses of high‐quality poly(5‐nitroindole) films in boron trifluoride diethyl etherate containing additional diethyl ether

High‐quality poly(5‐nitroindole) (PNP) films were synthesized electrochemically by the direct anodic oxidation of 5‐nitroindole in boron trifluoride diethyl etherate (BFEE) containing additional 10% diethyl ether (EE) (by volume). The addition of EE to BFEE could improve the solubility of the monomer. The oxidation potential onset of 5‐nitroindole in this medium was measured to be only 1.04 V versus a saturated calomel electrode (SCE), which was much lower than that determined in acetonitrile and 0.1 mol L^?1 tetrabutylammonium tetrafluoroborate (1.53 V vs SCE). PNP films obtained from this medium showed good electrochemical behavior and good thermal stability with a conductivity of 10^?2 S cm^?1; this indicated that BFEE containing 10% EE was a suitable medium for the electrosyntheses of PNP films. Structural studies showed that the polymerization of the 5‐nitroindole ring occurred at the 2,3‐position. As‐formed PNP films were thoroughly soluble in the strong polar organic solvent dimethyl sulfoxide and partly soluble in tetrahydrofuran or acetone. Fluorescent spectral studies indicated that PNP was a good green‐light emitter, with excitation and emission wavelengths of 420 and 550 nm, respectively. To the best of our knowledge, this is the first time that nitro‐group‐substituted high‐quality conducting polymer films have been electrodeposited. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3986–3997, 2005     

Synthesis of pure blue emissive poly(2,7‐carbazole)s anchored by electron donor pendant

Three novel poly(2,7‐carbazole)s having hole injection and transporting pendent moieties of carbazole and triphenylamine at the N‐position were synthesized for achieving pure blue electroluminescence. The N‐pendants in the polymers correspond to N‐phenylcarbazol‐2‐yl ( P1 ), N,N‐diphenylamino‐N‐phenylcarabazol‐2‐yl ( P2) , and 4‐phenyl having a hydrocarbon chain with a triphenylamine terminal ( P3 ), respectively. Electronic, optical, and electroluminescence properties of these polymers were compared with those of a poly(2,7‐carbazole) directly connected with triphenylamine at the N‐position ( P0 ) having an aggregation‐induced emissive property. The photoluminescence (PL) spectra suggested that they could emit in the region of blue light in the film state. Especially, P2 that has the fixed and large diphenylaminocarbazolyl pendant showed a deep‐blue fluorescence with CIE(x, y) = (0.15, 0.07). The P0 , P2 , and P3 based light emitting diode devices showed maximum electroluminescence wavelengths in the range of 430–450 nm. The P2 device showed pure blue emission (CIE[x, y] = [0.18, 0.16]), high luminance (1130 cd/m²) and current density (628 mA/cm²) at 8 V, whereas low‐energy emissions around 500–600 nm were emerged at higher than 9 V. The P0 and P3 devices also showed a blue electroluminescence in the range of 8–11 V, but their luminance and efficiency were low. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2526–2534     

Luminescence properties of soluble 2,2′,7,7′‐Tetrakis(2‐(9‐hexyl‐9H‐carbazol‐3‐yl)‐vinyl)‐9,9′‐spirobifluorene‐labeled dendrimers: Photoluminescence and electroluminescence

New light emitting dendrimers were synthesized by reacting 3,5‐bis‐(3,5‐bis‐benzyloxy‐benzyloxy)‐benzoic acid or 3,5‐bis‐[3,5‐bis‐(3,5‐bis‐benzyloxy‐benzyloxy)‐benzyloxy]‐benzoic acid with a carbazolyl vinyl spirobifluorene moiety. A blue‐emitting core dye was encapsulated by multibenzyloxy dendrons, and two dendrimers having different densities of dendrons were prepared. Photoluminescence (PL) studies of the dendrimers demonstrated that at the higher density of benzyloxy dendrons, the featureless vibronic transitions were improved, causing lesser excimer emission. The similarity of the solution and solid emission spectra of the larger dendrimer, 10 , revealed the suppression of molecular aggregation in the solid film, which is attributed to the presence of the bulky benzyloxy dendrons. The electroluminescence spectra of multilayered devices made using 10 predominantly exhibited blue emissions; similar emission was observed in the PL spectra of its thin film. The multilayered devices made using 3 , 9 , and 10 showed luminances of 1021 cd m^?2 at 5 V, 916 cd m^?2 at 6 V, and 851 cd m^?2 at 6.5 V, respectively. The largest dendrimer, 10 , bearing a greater number of benzyloxy dendrons, exhibited a blue‐like emission with CIE 1931 chromaticity coordinates of x = 0.16 and y = 0.13, which is due to the influence of a higher shielding effect. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 501–514, 2008     

Hydroacridines: Part 23. 1H and 13C NMR spectra of sym‐octahydroacridine,its 9‐(3‐pyridyl) and 9‐(4‐pyridyl) derivatives and the corresponding N(10)‐oxides. An experimental approach to the diamagnetic anisotropy of the pyridine nucleus

The complete ¹H NMR chemical shift assignments of 1,2,3,4,5,6,7,8‐octahydroacridine ( 1 ), 1,2,3,4,5,6,7,8‐octahydro‐9‐(3‐pyridyl)acridine ( 2 ), 1,2,3,4,5,6,7,8‐octahydro‐9‐(4‐pyridyl)acridine ( 3 ) and the corresponding N(10)‐oxides 1a , 2a and 3a , respectively, were achieved on the basis of 400 MHz ¹H NMR spectra and proton–proton decoupling, HMQC and NOEDIFF experiments. The spectral data for the above compounds provided the first experimental evidence of the difference in the anisotropy effect of the two non‐symmetrical moieties of the pyridine nucleus, and allowed us to ascertain that the shielding effect of the moiety defined by the C(2′)—N—C(6′) atoms is weaker than that of the C(3′)—C(4′)—C(5′) moiety. The ¹³C NMR spectra of 1 – 3 and 1a – 3a and the effect of N(10)‐oxidation on the ¹³C NMR chemical shifts are also discussed. The N‐oxidation of 2 and 3 with m‐chloroperbenzoic acid occurred regiospecifically, affording the N(10)‐oxides 2a and 3a free of N(1′)‐oxide isomers. Copyright © 2002 John Wiley & Sons, Ltd.     

Yellow‐light‐emitting cyano‐substituted poly[(1,3‐phenylene vinylene)‐alt‐(1,4‐phenylene vinylene)] derivative: Its synthesis and optical properties

A soluble cyano‐substituted poly[(1,3‐phenylene vinylene)‐alt‐(1,4‐phenylene vinylene)] derivative ( 9 ) was synthesized and characterized. Comparison between 9 and its model compound ( 10 ) showed that the chromophore in 9 remained to be well defined as a result of a π‐conjugation interruption at adjacent m‐phenylene units. The attachment of a cyano substituent only at the β position of the vinylene allowed the maximum electronic impact of the cyano group on the optical properties of the poly(p‐phenylene vinylene) material. At a low temperature (?108 or ?198 °C), the vibronic structures of 9 and 10 were partially resolved. The absorption and emission spectra of a film of 9 were less temperature‐dependent than those of a film of 10 , indicating that the former had a lower tendency to aggregate. A light‐emitting diode (LED) based on 9 emitted yellow light (λ_max ≈ 578 nm) with an external quantum efficiency of 0.03%. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3149–3158, 2003     

Electrosyntheses and characterization of poly(9-bromophenanthrene) in boron trifluoride diethyl etherate

A novel semi-conducting polymer poly(9-bromophenanthrene) (P9BP) was synthesized electrochemically by direct anodic oxidation of it is monomer 9-bromophenanthrene (9BP) in boron trifluoride diethyl etherate (BFEE). The oxidation onset potential of 9BP in this medium was measured to be only 1.33 V vs. saturated calomel electrode (SCE). P9BP films obtained from BFEE showed good electrochemical behavior and nice thermal stability with electrical conductivity of 0.03 S cm⁻¹. FTIR and ¹H NMR spectra together with theoretical quantum chemistry calculations indicated that the P9BP was mainly grown via the coupling of the monomer at C₃ and C₆ positions. Furthermore, P9BP exhibited strong electrochromic nature from opaque green to light yellow between the doped and dedoped states on ITO electrode in solid state. Fluorescence spectral studies indicated that P9BP was a blue light emitter.     

Synthesis and properties of conjugated copolycondensates consisting of carbazole‐2,7‐diyl and fluorene‐2,7‐diyl

Carbazole and fluorene‐based random and alternating copolycondensates were synthesized to develop high‐performance blue light‐emitting polymers by improving electron injection ability of poly(N‐aryl‐2,7‐carbazole)s that showed intense blue electroluminescence (EL) with good hole‐injection and ‐transport ability. These copolycondensates absorbed light energy at about λ_max = 390 nm in CHCl₃ and 400 nm in film state, and fluoresced at about λ_max = 417 nm in CHCl₃ and 430 nm in the thin film state. Energy gaps between highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of them were about 2.9 eV, and the energy levels of LUMO situated lower than that of corresponding polycarbazole. Polymer light‐emitting diode devices having configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene)‐poly(styrenesulfonate)/polymer/CsF/Al using the copolycondensates, poly(N‐arylcarbazole‐2,7‐diyl), and poly(9,9‐dialkylfluorene‐2,7‐diyl), emitted bluish EL at operating voltages lower than 7 V. The device embedded the random copolycondensate showed notably higher performance with maximum luminance of 31,200 cd m^?2 at 11.0 V, and the current efficiencies observed under operating voltages lower than 7 V were higher than those of the other devices. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Low potential electrochemical polymerization of diphenyl ether and characterization of its polymers

High‐quality poly(diphenyl ether) (PDPE) films with electrical conductivity of 4.4 × 10^?1 S cm^?1 were synthesized electrochemically by direct anodic oxidation of diphenyl ether (DPE) in boron trifluoride diethyl etherate (BFEE) containing 5% concentrated sulfuric acid (SA) (by volume). The oxidation potential onset of DPE in pure BFEE was measured to be only 1.37 V versus a saturated calomel electrode (SCE), which was much lower than that determined in acetonitrile + 0.1 mol L^?1 tetrabutylammonium tetrafluoroborate (1.98 V vs. SCE). The addition of SA to BFEE can further decrease the oxidation potential onset of the monomer to 1.18 V versus SCE in the mixed electrolyte of BFEE + 5% SA. PDPE films obtained from this medium showed good redox activity and stability even in concentrated SA. Dedoped PDPE films were partly soluble in the strong polar organic solvent dimethyl sulfoxide. Fluorescent spectral studies indicated that soluble PDPE was a good blue‐light emitter with a quantum yield of 0.30. Infrared spectroscopy and quantum chemistry calculations indicated that the electropolymerization of DPE occurred mainly at C₄ and C_4′. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5932–5941, 2007     

Highly stable electrochromic polyamides based on N,N‐bis(4‐aminophenyl)‐N′,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine

A new triphenylamine‐containing aromatic diamine monomer, N,N‐bis(4‐aminophenyl)‐N′,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine, was synthesized by an established synthetic procedure from readily available reagents. A novel family of electroactive polyamides with di‐tert‐butyl‐substituted N,N,N′,N′‐tetraphenyl‐1,4‐phenylenediamine units were prepared via the phosphorylation polyamidation reactions of the newly synthesized diamine monomer with various aromatic or aliphatic dicarboxylic acids. All the polymers were amorphous with good solubility in many organic solvents, such as N‐methyl‐2‐pyrrolidinone (NMP) and N,N‐dimethylacetamide, and could be solution‐cast into tough and flexible polymer films. The polyamides derived from aromatic dicarboxylic acids had useful levels of thermal stability, with glass‐transition temperatures of 269–296 °C, 10% weight‐loss temperatures in excess of 544 °C, and char yields at 800 °C in nitrogen higher than 62%. The dilute solutions of these polyamides in NMP exhibited strong absorption bands centered at 316–342 nm and photoluminescence maxima around 362–465 nm in the violet‐blue region. The polyamides derived from aliphatic dicarboxylic acids were optically transparent in the visible region and fluoresced with a higher quantum yield compared with those derived from aromatic dicarboxylic acids. The hole‐transporting and electrochromic properties were examined by electrochemical and spectro‐electrochemical methods. Cyclic voltammograms of the polyamide films cast onto an indium‐tin oxide‐coated glass substrate exhibited two reversible oxidation redox couples at 0.57–0.60 V and 0.95–0.98 V versus Ag/AgCl in acetonitrile solution. The polyamide films revealed excellent elcterochemical and electrochromic stability, with a color change from a colorless or pale yellowish neutral form to green and blue oxidized forms at applied potentials ranging from 0.0 to 1.2 V. These anodically coloring polymeric materials showed interesting electrochromic properties, such as high coloration efficiency (CE = 216 cm²/C for the green coloring) and high contrast ratio of optical transmittance change (ΔT%) up to 64% at 424 nm and 59% at 983 nm for the green coloration, and 90% at 778 nm for the blue coloration. The electroactivity of the polymer remains intact even after cycling 500 times between its neutral and fully oxidized states. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2330–2343, 2009     

2,2,2‐trifluoroacetophenone‐based D‐π‐A type photoinitiators for radical and cationic photopolymerizations under near‐UV and visible LEDs

Two D‐π‐A‐type 2,2,2‐trifluoroacetophenone derivatives, namely, 4′‐(4‐( N,N‐diphenyl)amino‐phenyl)‐phenyl‐2,2,2‐trifluoroacetophenone (PI‐Ben) and 4′‐(4‐(7‐(N,N‐diphenylamino)‐9,9‐dimethyl‐9H‐fluoren‐2‐yl)‐phenyl‐2,2,2‐trifluoroacetophenone (PI‐Flu), are developed as high‐performance photoinitiators combined with an amine or an iodonium salt for both the free‐radical polymerization of acrylates and the cationic polymerization of epoxides and vinyl ether upon exposure to near‐UV and visible light‐emitting diodes (LEDs; e.g., 365, 385, 405, and 450 nm). The photochemical mechanisms are investigated by UV‐Vis spectra, molecular‐orbital calculations, fluorescence, cyclic voltammetry, photolysis, and electron‐spin‐resonance spin‐trapping techniques. Compared with 2,2,2‐trifluoroacetophenone, both photoinitiators exhibit larger redshift of the absorption spectra and higher molar‐extinction coefficients. PI‐Ben and PI‐Flu themselves can produce free radicals to initiate the polymerization of acrylate without any added hydrogen donor. These novel D‐π‐A type trifluoroacetophenone‐based photoinitiating systems exhibit good efficiencies (acrylate conversion = 48%–66%; epoxide conversion = 85%–95%; LEDs at 365–450 nm exposure) even in low‐concentration initiators (0.5%, w/w) and very low curing light intensities (1–2 mW cm^?2). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1945–1954     

Tuning the energy level of TAPC: crystal structure and photophysical and electrochemical properties of 4,4′‐(cyclohexane‐1,1‐diyl)bis[N,N‐bis(4‐methoxyphenyl)aniline]

The energy level of a hole‐transporting material (HTM) in organic electronics, such as organic light‐emitting diodes (OLEDs) and perovskite solar cells (PSCs), is important for device efficiency. In this regard, we prepared 4,4′‐(cyclohexane‐1,1‐diyl)bis[N,N‐bis(4‐methoxyphenyl)aniline] ( TAPC‐OMe ), C₄₆H₄₆N₂O₄, to tune the energy level of 4,4′‐(cyclohexane‐1,1‐diyl)bis[N,N‐bis(4‐methylphenyl)aniline] ( TAPC ), which is a well‐known HTM commonly used in OLED applications. A systematic characterization of TAPC‐OMe , including ¹H and ¹³C NMR, elemental analysis, UV–Vis absorption, fluorescence emission, density functional theory (DFT) calculations and single‐crystal X‐ray diffraction, was performed. TAPC‐OMe crystallized in the triclinic space group P, with two molecules in the asymmetric unit. The dihedral angles between the central amine triangular planes and those of the phenyl groups varied from 26.56 (9) to 60.34 (8)° due to the steric hindrance of the central cyclohexyl ring. This arrangement might be induced by weak hydrogen bonds and C—H…π(Ph) interactions in the extended structure. The emission maxima of TAPC‐OMe showed a significant bathochomic shift compared to that of TAPC . A strong dependency of the oxidation potentials on the nature of the electron‐donating ability of substituents was confirmed by comparing oxidation potentials with known Hammett parameters (σ).     

Electrochemical polymerization of thianaphthene

Thianaphthene has been electrochemically polymerized in pure boron trifluoride diethyl etherate (BFEE) solution or in a mixed electrolyte of BFEE and concentrated sulfuric acid (SA). The addition of a certain amount of sulfuric acid into BFEE accelerated the polymerization and also increased the current efficiency of the electrosynthesis. Poly(thianaphthene) (PTN) in the dedoped state is soluble in usual strong polar organic solvents such as dimethyl sulfoxide (DMSO), N,N-dimethylformamide (DMF) and N-methyl pyrrolidinone (NMP). Its structure has been examined by infrared, H¹-NMR and UV spectra. Fluorescent spectral studies indicate that the polymer is a strong blue light emitter.     

Facile electrochemical preparation of poly(9,9‐dichlorofluorene), a new polyfluorene derivative as green light emitter

High‐quality poly(9,9‐dichlorofluorene) (PDCF), a new part soluble polyfluorene derivative, was easily synthesized electrochemically by direct anodic oxidation of 9,9‐dichlorofluorene (DCF) in boron trifluoride diethyl etherate (BFEE) containing 15% (by volume) trifluoroacetic acid (TFA). It was hard for DCF to deposit on the electrode in neutral solvents such as CH₃CN system. This methodology may help promotion of researches to reveal unknown properties and applications of polyfluorene materials. PDCF films with conductivity of 3.3 × 10^?2 S cm^?1 obtained from this media show good redox activity and thermal stability. The structure and morphology of the polymer were studied by UV–vis, FTIR, ¹H NMR spectra, and scanning electron microscopy, respectively. The results of quantum chemistry calculations and the spectroscopies of dedoped PDCF indicate that the polymerization of DCF mainly occurs via C₍₂₎ and C₍₇₎ position. Fluorescent spectral studies indicate that PDCF film with high fluorescence quantum yields and photochemical stability is a novel green light emitter. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1791–1799, 2010     

Electrosyntheses of high‐quality polyphenanthrene in the electrolyte of boron trifluoride diethyl etherate containing trifluoroacetic acid

A novel inherently conducting polymer, high‐quality polyphenanthrene (PPh) films were synthesized electrochemically by direct anodic oxidation of phenanthrene (Ph) in boron trifluoride diethyl etherate (BFEE) containing a certain amount of trifluoroacetic acid (TFA). The oxidation potential of Ph in this medium was measured to be only 0.63 V versus SCE, which was greatly lower than that determined in acetonitrile + 0.1 mol L^?1 Bu₄NBF₄ (1.55 V vs. SCE). The electrolytes of BFEE containing TFA enable facile anodic oxidation of Ph monomer; however, similar oxidation using acetonitrile never produces such a polymeric material. PPh films obtained from this medium showed good redox activity and stability even in concentrated sulfuric acid. Dedoped PPh films were partly soluble in polar solvent such as CH₂Cl₂, acetone, tetrahydrofuran, and dimethyl sulfoxide. Fluorescent spectral studies indicate that PPh is a good blue‐light emitter. The structure and morphology of the polymer were studied by UV–vis spectroscopy, FTIR spectroscopy, ¹H NMR spectroscopy, and scanning electron microscopy, respectively. The results of quantum chemistry calculations of Ph monomer and the spectroscopies of dedoped PPh indicated the polymerization mainly occurred at C₍₉₎ and C₍₁₀₎ positions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3929–3940, 2007     

Novel thermally stable poly(amine hydrazide)s and poly(amine‐1,3,4‐oxadiazole)s for luminescent and electrochromic materials

We describe the preparation, characterization, and luminescence of four novel electrochromic aromatic poly(amine hydrazide)s containing main‐chain triphenylamine units with or without a para‐substituted N,N‐diphenylamino group on the pendent phenyl ring. These polymers were prepared from either 4,4′‐dicarboxy‐4″‐N,N‐diphenylaminotriphenylamine or 4,4′‐dicarboxytriphenylamine and the respective aromatic dihydrazide monomers via a direct phosphorylation polycondensation reaction. All the poly(amine hydrazide)s were amorphous and readily soluble in many common organic solvents and could be solution‐cast into transparent and flexible films with good mechanical properties. These poly(amine hydrazide)s exhibited strong ultraviolet–visible absorption bands at 346–348 nm in N‐methyl‐2‐pyrrolidone (NMP) solutions. Their photoluminescence spectra in NMP solutions or as cast films showed maximum bands around 508–544 and 448–487 nm in the green and blue region for the two series of polymers. The hole‐transporting and electrochromic properties were examined by electrochemical and spectroelectrochemical methods. All obtained poly(amine hydrazide)s and poly(amine‐1,3,4‐oxadiazole)s exhibited two reversible oxidation redox couples at 0.8 and 1.24 V vs. Ag/AgCl in acetonitrile solution and revealed excellent stability of electrochromic characteristics, changing color from original pale yellow to green and then to blue at electrode potentials of 0.87 and 1.24 V, respectively. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3245–3256, 2005     

Construction of (3,8)‐connected three‐dimensional cobalt(II) and copper(II) coordination polymers with 1,3‐bis[(1,2,4‐triazol‐4‐yl)methyl]benzene and benzene‐1,3,5‐tricarboxylate ligands

Coordination polymers (CPs) have been widely studied because of their diverse and adjustable topologies and wide‐ranging applications in luminescence, chemical sensors, magnetism, photocatalysis, gas adsorption and separation. In the present work, two coordination polymers, namely poly[(μ₅‐benzene‐1,3,5‐tricarboxylato‐κ⁶O¹:O^1′:O³:O³:O⁵,O^5′){μ₃‐1,3‐bis[(1,2,4‐triazol‐4‐yl)methyl]benzene‐κ³N:N′:N′′}di‐μ₃‐hydroxido‐dicobalt(II)], [Co₂(C₉H₃O₆)(OH)(C₁₂H₁₂N₆)]_n or [Co₂(btc)(OH)(mtrb)]_n, (1), and poly[[diaquabis(μ₃‐benzene‐1,3,5‐tricarboxylato‐κ³O¹:O³:O⁵)bis{μ₃‐1,3‐bis[(1,2,4‐triazol‐4‐yl)methyl]benzene‐κ³N:N′:N′′}tetra‐μ₃‐hydroxido‐tetracopper(II)] monohydrate], {[Cu₄(C₉H₃O₆)₂(OH)₂(C₁₂H₁₂N₆)₂(H₂O)₂]·H₂O}_n or {[Cu₄(btc)₂(OH)₂(mtrb)₂(H₂O)₂]·H₂O}_n, (2), were synthesized by the hydrothermal method using 1,3‐bis[(1,2,4‐triazol‐4‐yl)methyl]benzene (mtrb) and benzene‐1,3,5‐tricarboxylate (btc^3?). CP (1) exhibits a (3,8)‐coordinated three‐dimensional (3D) network of the 3,8T38 topological type, with a point symbol of {4,5,6}₂{4²·5⁶·6¹⁶·7²·8²}, based on the tetranuclear hydroxide cobalt(II) cluster [Co₄(μ₃‐OH)₂]. CP (2) shows a (3,8)‐coordinated tfz‐d topology, with a point symbol of {4₃}₂{4⁶·6¹⁸·8⁴}, based on the tetranuclear hydroxide copper(II) cluster [Cu₄(μ₃‐OH)₂]. The different (3,8)‐coordinated 3D networks based on tetranuclear hydroxide–metal clusters of (1) and (2) are controlled by the different central metal ions [Co^II for (1) and Cu^II for (2)]. The thermal stabilities and solid‐state optical diffuse‐reflection spectra were measured. The energy band gaps (E_g) obtained for (1) and (2) were 2.72 and 2.29 eV, respectively. CPs (1) and (2) exhibit good photocatalytic degradation of the organic dyes methylene blue (MB) and rhodamine B (RhB) under visible‐light irradiation.     

Synthesis,characterization, and application of light‐emitting copolyfluorenes slightly doped with distyrylbenzene derivatives

Copolyfluorenes PFG1～PFG4 slightly doped with 0.006–0.5 mol % of 2,5‐dihexyloxy‐1,4‐bis(2‐phenyl‐2‐cyanovinyl)benzene (green chromophore) were synthesized by the Suzuki coupling reaction to be evaluated as hosts for white‐light electroluminescent (EL) devices. Their optical, thermal and electrochemical properties were almost identical to those of polyfluorene ( PF ) due to minimal chromophore content. However, the electroluminescent (EL) spectra of the PFGn were very different from photoluminescence spectra in film state. Relative intensity of green emission (ca. 521 nm) in EL spectra are much stronger than those in PL spectra, which can be attributed to charges trapping in the chromophores due to its narrow band gap (E_g ≈ 2.56 eV). The performance of EL devices [ITO/PEDOT:PSS/polymer/Ca (50 nm)/Al (100 nm)] were improved with an increase in chromophore content. The PFG4 device revealed the best performance (6790 cd/m², 1.69 cd/A), and the PFG1 and PFG2 devices exhibited comparable intensity in blue and green emissions. Blend EL devices were fabricated by using the PFGn as the hosts and a red iridium complex [Ir(piq)₂(acac)] as dopant. By controlling the amount of the iridium complex, the white‐light emitting device was achieved with PFG2 , with maximum brightness and CIE coordinate being 4120 cd/m² and (0.31, 0.28), respectively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 149–160, 2009