One-pot three-component process for the synthesis of substituted pyrano[2,3-<Emphasis Type="Italic">c</Emphasis>]pyrazoles catalyzed by nanostructured FSM-16-SO<Subscript>3</Subscript>H

A three-component process for the one-pot synthesis of 6-amino-4-aryl-5-cyano-3-methyl-1-phenyl-1,4-dihydropyrano[2,3-c]pyrazoles by the reaction of aldehydes, 3-methyl-1-phenyl-1H-pyrazol-5(4H)-one, and malononitrile in the presence of FSM-16-SO₃H as an efficient mesoporous catalyst. The FSM-16-SO₃H was prepared and characterized by SEM, XRD, BET, and FT-IR techniques. The advantages of the presented method are high yields, short reaction times, easy purification of products, easy work-up, and reusability of the catalyst.     

Synthesis of pyrano[2,3-<Emphasis Type="Italic">c</Emphasis>]pyrazoles by ionic liquids under green and eco-safe conditions

Optimization of a green approach to the synthesis of pyrano[2,3-c]pyrazoles based on the one-pot, four-component condensation via a domino Knoevenagel/Michael/cyclization sequence was investigated. This method involved the evaluation of the activity of several ionic liquids (ILs) in various solvents. This one-pot, four-component reaction revealed simplicity, higher yield and lower toxicity advantages over a corresponding three-component method. The effect of reaction parameters including the type and amount of catalyst, type of solvent, reaction temperature and time were studied with respect to yield of pyrano[2,3-c]pyrazoles. Catalyst recyclability and time-saving aspects of the reaction suggest that this method presents real alternatives over conventional reaction protocols.     

Synthesis and X-ray study of 6<Emphasis Type="Italic">H</Emphasis>-chromeno[3,4-<Emphasis Type="Italic">e</Emphasis>][1,3,4]triazolo[2,3-<Emphasis Type="Italic">a</Emphasis>]pyrimidine

2-Dimethylamino methylenechromanone 1 reacted with 4H-1,2,4-triazol-3-amine in acetic acid to give only one isolated product which was identified by X-ray study as 6H-chromeno[3,4-e][1,3,4]triazolo[2,3-a]-pyrimidine. The molecular structure of 3, C₁₂H₈N₄O, was determined to be monoclinic, P2₁/c, a = 16.3875(5), b = 8.8378(3), c = 13.8392(5) Å, β = 101.190(1)°, V = 1966.22(11) ų, Z = 8.     

Organocatalytic approach toward the green one-pot synthesis of novel benzo[<Emphasis Type="Italic">f</Emphasis>]chromenes and 12<Emphasis Type="Italic">H</Emphasis>-benzo[5,6]chromeno[2,3-<Emphasis Type="Italic">b</Emphasis>]pyridines

An efficient tandem reaction approach is described to prepare novel benzo[f]chromenes from 2,3-dihydroxynaphthalene, malononitrile and aldehydes using 10 mol% guanidine hydrochloride as the catalyst under solvent-free conditions. The method was also extended to the preparation of novel 12H-benzo[5,6]chromeno[2,3-b]pyridines from 2-aminoprop-1-ene-1,1,3-tricarbonitrile instead of malononitrile under the same reaction conditions. The described one-pot three-component reaction is characterized by short reaction times, high-product yield, mild reaction conditions, simple workup procedure, and simple purification.     

Reactions of 3-Aroylpyrrolo[1,2-<Emphasis Type="Italic">a</Emphasis>]quinoxaline-1,2,4(5<Emphasis Type="Italic">H</Emphasis>)-triones with 2,3-Dihydrofuran and 3,4-Dihydro-2<Emphasis Type="Italic">H</Emphasis>-pyran

3-Aroylpyrrolo[1,2-a]quinoxaline-1,2,4(5H)-triones reacted with 2,3-dihydrofuran and 3,4-dihydro-2H-pyran to give mixtures of the corresponding hetero-Diels–Alder (furo- and pyrano[3″,2″: 5′,6′]pyrano- [4′,3′: 2,3]pyrrolo[1,2-a]quinoxalines) and Michael adducts (furyl- and pyranylpyrrolo[1,2-a]quinoxalines).     

Alkylation of 1-Alkyl-3-methyl-1,4-dihydropyrazolo[4,3-<Emphasis Type="Italic">c</Emphasis>]pyrazoles with Halocarboxylic Acids Esters

A preparative method for the synthesis of 1-alkyl-3-methyl-1,4-dihydropyrazolo[4,3-c]pyrazoles was developed. The alkylation of the obtained compounds with halocarboxylic acid esters was also investigated. A principal possibility of creating libraries of compounds based on pyrazolo[4,3-c]pyrazole derivatives was shown.     

Synthesis of 4-halo-3-(phenylamino)furo[3,4-<Emphasis Type="Italic">c</Emphasis>]pyridin-1(3<Emphasis Type="Italic">H</Emphasis>)-ones

A method was developed for the synthesis of 4-halo-3-(phenylamino)-furo[3,4-c]pyridin-1(3H)-ones by the reaction of 4-halo-3-hydroxyfuro[3,4-c]pyridin-1(3H)-ones with aniline at room temperature.     

Reactions of 2-(2-propynylsulfanyl)-5,6,7,8-tetrahydrobenzo[<Emphasis Type="Italic">b</Emphasis>]thieno[2,3-<Emphasis Type="Italic">d</Emphasis>]pyrimidin-4(<Emphasis Type="Italic">3H</Emphasis>)-one with arylsulfenyl chlorides

2-(2-propynylsulfanyl)-5,6,7,8-tetrahydrobenzo[b]thieno[2,3-d]pyrimidin-4(3H)-one with arylsulfenyl chlorides in chloroform gave products of anti-Markownikoff Ad _E-addition. The use of nitromethane as solvent in the presence of lithium perchlorate additives favored intramolecular electrophilic cyclization into 1-arylsulfanyl-1,2,6,7,8,9-hexahydro-4H-benzo[4,5]thieno[3,2-e][1,3]thiazolo[3,2-a]-pyrimidin-5-one.     

Synthesis of 1-(1,3-dialkyl-2-oxo-2,3-dihydro-1<Emphasis Type="Italic">H</Emphasis>-imidazo-[4,5-<Emphasis Type="Italic">b</Emphasis>]pyridin-5-yl)-5-oxopyrrolidine-3-carboxylic acids

Nitration of 2,3-dihydro-1H-imidazo[4,5-b]pyridin-2-one gave its 5-nitro derivative which was subjected to alkylation with dimethyl sulfate, diethyl sulfate, and benzyl(dimethyl)phenylammonium chloride. The resulting 1,3-dimethyl-, 1,3-diethyl-, and 1,3-dibenzyl-5-nitro-2,3-dihydro-1H-imidazo[4,5-b]pyridin-2-ones were reduced to the corresponding 1,3-dialkyl-5-amino-2,3-dihydro-1H-imidazo[4,5-b]pyridin-2-ones, and the latter reacted with itaconic acid to produce 1-(1,3-dialkyl-2-oxo-2,3-dihydro-1H-imidazo[4,5-b]pyridin-5-yl)-5-oxopyrrolidine-3-carboxylic acids. 1-(2-Oxo-2,3-dihydro-1H-imidazo[4,5-b]pyridin-5-yl)-5-oxopyrrolidine-3-carboxylic acid was obtained by analogous reaction with 5-amino-2,3-dihydro-1H-imidazo[4,5-b]-pyridin-2-one.     

New approach to the synthesis of pyrrolo[3,4-<Emphasis Type="Italic">c</Emphasis>]pyridines

Strategies of synthesis of pyrrolo[3,4-c]pyridines were developed based on cyclization of 3-phenacyl-4-ethoxycarbonyl(acetyl)pyrrole derivatives reacting with N-methylformamide or formamide, and also on recyclization of pyrrolo[3,4-c]pyrylium salts under the action of ammonium acetate and hydrazine acetate. The influence of substituents in initial reagents on composition of reaction products was studied.     

Synthesis of novel 4<Emphasis Type="Italic">H</Emphasis>-furo[3,2-c]pyran-4-ones and 4<Emphasis Type="Italic">H</Emphasis>-furo[3,2-<Emphasis Type="Italic">c</Emphasis>]chromen-4-ones

It was found that the condensation of two equivalents of 4-hydroxy-6-methyl-2H-pyran-2-one or 4-hydroxycoumarin with arylglyoxals in boiling formic acid leads to 4H-furo[3,2-c]-pyran-4-ones or 4H-furo[3,2-c]chromen-4-ones, respectively.     

Synthesis of 2-bromomethyl-4-methyl-2,3-dihydrofuro[3,2-<Emphasis Type="Italic">c</Emphasis>]-quinoline and some its transformations

Electrophilic intramolecular heterocyclization of 3-(2-chloroprop-2-en-1-yl)-2-methylquinolin-4-ol by the action of bromine gave 2-bromomethyl-2-chloro-4-methyl-2,3-dihydrofuro[3,2-c]quinoline hydrobromide which was converted into 2-hydroxymethyl-, 2-alkoxymethyl-, and 2-dialkylaminomethyl-4-methylfuro[3,2-c]quinolines by treatment with the corresponding nucleophiles.     

New Synthesis of Pyrano[4,3-<Emphasis Type="Italic">d</Emphasis>]pyrazolo[3,4-<Emphasis Type="Italic">b</Emphasis>]pyridines

A new efficient method has been developed for the synthesis of highly biologically active pyrano-[4,3-d]pyrazolo[3,4-b]pyridines on the basis of Smiles rearrangement of ethyl [(8-alkyl(aryl)-5-cyano-3,3-dimethyl-3,4-dihydro-1H-pyrano[3,4-c]pyridin-6-yl)oxy]acetates. Intermediate acetohydrazides have also been isolated. The proposed procedure is advantageous due to the possibility of avoiding experimentally difficult chlorination stage.     

Synthesis and properties of cyanomethyl derivatives of imidazo[1,2-<Emphasis Type="Italic">a</Emphasis>]pyridine,imidazo[1,2-<Emphasis Type="Italic">a</Emphasis>]pyrimidine,and imidazo[2,1-<Emphasis Type="Italic">b</Emphasis>]thiazole

2-Cyanomethyl derivatives were obtained of imidazo[1,2-a]pyridine, imidazo[1,2-a]pyrimidine, and imidazo[2,1-b]thiazole, and their reactivity was investigated by an example of imidazo[1,2-a]pyridine: It was subjected to nitration, bromination, azo coupling and nitrosation. Acylation of the methylene group effected by amino acids esters with a subsequent addition of the amino group to the cyano group resulted in the formation of 5-amino-4-imidazo[1,2-a]-pyridin-2-yl-1-phenyl-1,2-dihydro-3H-pyrrol-3-one and 2-amino-1-ethyl-3-imidazol[1,2-a]pyridin-2-yl-4(1H)-quinolinone.     

Reduction and diazotization of ethyl 7-amino-3-<Emphasis Type="Italic">tert</Emphasis>-butyl-4-oxo-4,6-dihydropyrazolo[5,1-<Emphasis Type="Italic">c</Emphasis>][1,2,4]triazine-8-carboxylate

The ester group in ethyl 7-amino-3-tert-butyl-4-oxo-4,6-dihydropyrazolo[5,1-c][1,2,4]triazine-8-carboxylate was converted for the first time to methyl by the action of lithium tetrahydridoborate in the presence of boron trifluoride–diethyl ether complex. This reaction has almost no analogies among other classes of organic compounds. New difficultly accessible 7-chloro and 7-azido derivatives were synthesized via diazotization of the reduction product, and treatment of the latter with acetic anhydride afforded the exhaustively acetylated derivative. Diazotization of ethyl 7-amino-3-tert-butyl-4-oxo-4,6-dihydropyrazolo-[5,1-c][1,2,4]triazine-8-carboxylate, followed by reaction with sodium azide, gave the corresponding azide, and the product of azo coupling with ethyl acetoacetate failed to undergo intramolecular cyclization to tricyclic pyrazolo[3,2-c: 5,1-c′]bis[1,2,4]triazine system.     

Methyl (5-oxopyrazol-3-yl)acetate <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">S</Emphasis>-ketene acetal as a new building block for the construction of pyrazolo[4,3-<Emphasis Type="Italic">c</Emphasis>]pyridines

Methyl (5-oxopyrazol-3-yl)acetate is added to methylthiocyanate C≡N bond in the presence of Ni(OAc)₂ giving a corresponding heterocyclic N,S-ketene acetal. The latter compound was used as a convenient synthon in the synthesis of new pyrazolo[4,3-c]pyridin-3-ones and pyrazolo[4,3-c]pyridine-3,6-diones.     

Recyclization of 1,3-dialkyl-6-nitro-1<Emphasis Type="Italic">H</Emphasis>-imidazo[4,5-<Emphasis Type="Italic">b</Emphasis>]pyridine-2,5(3<Emphasis Type="Italic">H</Emphasis>,4<Emphasis Type="Italic">H</Emphasis>)-diones into imidazole derivatives

Treatment of 5-amino-1,3-dialkyl-2,3-dihydro-1H-imidazo[4,5-b]pyridin-2-ones with sodium nitrite in aqueous HCl gave 1,3-dialkyl-1H-imidazo[4,5-b]pyridine-2,5(3H,4H)-diones which were nitrated with potassium nitrate in sulfuric acid to 6-nitro derivatives, and the latter underwent recyclization into 4-amino-1,3-dialkyl-5-(1H-pyrazol-5-yl)-2,3-dihydro-1H-imidazol-2-ones by the action of hydrazine hydrate.     

Synthesis of 8,16-diarylacridino[4,3-<Emphasis Type="Italic">c</Emphasis>]acridine-1,9-dione derivatives

A number of new acridino[4,3-c]acridinedione derivatives have been synthesized for the first time by condensation of N¹,N⁵-bis(arylmethylidene)naphthalene-1,5-diamines with cyclic 1,3-diketones (cyclohexane-1,3-dione and dimedone). The product structure has been determined by two-dimensional NMR spectroscopy, and a probable reaction mechanism has been proposed.     

Green procedure for the synthesis of 1,4-dihydropyrano[2,3-<Emphasis Type="Italic">c</Emphasis>]pyrazoles using saccharose

Saccharose was applied as an efficient and homogeneous catalyst for one-pot, four-component synthesis of 1,4-dihydropyrano[2,3-c]pyrazole derivatives from aromatic aldehydes, malononitrile, ethyl acetoacetate and hydrazine monohydrate under thermal solvent-free conditions. This protocol has a considerable number of advantages including mild condition, high yields, operational simplicity, environmentally benign and simple work-up procedures.     

Electrophilic heterocyclization of 6-alken(yn)ylsulfanyl-pyrazolo[3,4-<Emphasis Type="Italic">d</Emphasis>]pyrimidin-4(5<Emphasis Type="Italic">H</Emphasis>)-ones

6-Allylsulfanyl-1-arylpyrazolo[3,4-d]pyrimidin-4(5H)-ones react with iodine and sulfuric acid to give angular pyrazolothiazolopyrimidine derivatives. The reaction of 6-(prop-2-yn-1-ylsulfanyl)-1-(4-tolyl)-pyrazolo[3,4-d]pyrimidin-4(5H)-one with sulfuric acid gives angularly fused pyrazolo[4,3-e][1,3]thiazolo-[3,2-a]pyrimidin-4-one, whereas in the reaction with sodium methoxide linearly fused pyrazolo[3,4-d][1,3]-thiazolo[3,2-a]pyrimidin-4-one was formed. Linearly fused pyrazolo[3′,4′:4,5]pyrimido[2,1-b][1,3]thiazole derivatives were also obtained by reaction of 1-aryl-6-(3-phenylprop-2-en-1-ylsulfanyl)pyrazolo[3,4-d]pyrimidin-4(5H)-ones with sulfuric acid.