Structure–reactivity relationships of alkyl α‐hydroxymethacrylate derivatives

A series of alkyl α‐hydroxymethacrylate derivatives with various secondary functionalities (ether, ester, carbonate, and carbamate) and terminal groups (alkyl, cyano, oxetane, cyclic carbonate, phenyl and morpholine) were synthesized to investigate the effect of intermolecular interactions, H‐bonding, π–π interactions, and dipole moment on monomer reactivity. All of the monomers except one ester and one ether derivative are novel. The polymerization rates, determined by using photo‐DSC, showed the average trend (aromatic carbamate > hydroxyl > ester > carbonate ～ aliphatic carbamate ～ ether), with several exceptions due to the differences in terminal groups. There is a correlation between the chemical shift differences of the double bond carbons, the calculated dipole moments, and the reactivities only for nonhydrogen bonded monomers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

High‐molecular‐weight side‐chain liquid‐crystalline polyethers based on 4′‐cyanobiphenyl‐4‐oxy mesogenic groups

A set of poly[ω‐(4′‐cyano‐4‐biphenyloxy)alkyl‐1‐glycidylether]s were synthesized by the chemical modification of the corresponding poly(ω‐bromoalkyl‐1‐glycidylether)s with the sodium salt of 4‐cyano‐4′‐hydroxybiphenyl. New high‐molecular‐weight side‐chain liquid‐crystalline polymers were obtained with excellent yield and almost quantitative degree of modification. All side‐chain liquid‐crystalline polymers were rubbers soluble in tetrahydrofuran. The characterization by ¹H and ¹³C NMR revealed no changes in the regioregular isotactic microstructure of the starting polymer and the absence of undesirable side reactions such as deshydrobromination. The liquid crystalline behavior was analyzed by DSC and polarized optical microscopy, and mesophase assignments were confirmed by X‐ray diffraction. Polymers that had alkyl spacers with n = 2 and 4 were nematic, those that had spacers with n = 6 and 8 were nematic cybotactic, and those that had longer spacers (n = 10 and 12) were smectic C and showed some crystallization of the side alkyl chains. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3002–3012, 2004     

Nanofold‐decorated surfaces from the electrodeposition of di‐alkyl‐cyclopentadithiophenes

This work describes the synthesis and subsequent electrodeposition of 4H‐cyclopenta[2,1‐b:3,4‐b′]dithiophene (cyclopentadithiophene) monomers di‐substituted with alkyl chains. Each monomer was electropolymerized in solution to observe their capacity at creating well‐structured, rough surfaces. The length of the alkyl chain substituent has a significant influence on the overall surface morphology and wetting behavior after electropolymerization. In the case of nonsubstituted cyclopentadithiophene monomers or those with short alkyl (methyl and ethyl) substituents, the polymerization proceeds readily, forming rough surfaces that follow the Wenzel regime of wetting. In these cases, the surfaces were decorated with globular agglomerates and woven mat features. The measured surface roughness decreases with alkyl chain length as steric hindrance caused by the alkyl substituents limits electropolymerization. As the alkyl chain substituent increases to propyl chain length and beyond, the increase in steric hindrance is so significant that the surface morphology formed during electrodeposition is primarily due to π‐stacking interactions between very short oligomers formed in solution. With propyl and butyl substituents, nanofold morphology is observed, leading to surfaces with much higher contact angles with water (~132°) that follow the Cassie‐Baxter regime of wetting. This type of surface morphology has only been demonstrated one other time and with the use of fluorinated constituents. This work exposes a mild, fluorine‐free synthetic route to creating nanofold‐decorated surfaces.     

Photoluminescent and Liquid‐Crystalline Properties of Donor–Acceptor‐Type 2,5‐Diarylthiazoles

The synthesis of donor–acceptor‐type 2,5‐diarylthiazoles that bear electron‐donating N,N‐dialkylamine and electron‐withdrawing cyano groups at the 2‐ and 5‐position, respectively, were carried out with transition‐metal‐catalyzed C? H arylation reactions developed by us. The compounds were synthesized by the C? H arylation of unsubstituted thiazole at the 2‐position with a palladium/copper catalyst in the presence of tetrabutylammonium fluoride (TBAF) as an activator. Further C? H arylation of the 2‐arylated thiazole at the 5‐position was carried out by the palladium‐catalyzed reaction in the presence of silver(I) fluoride to afford the donor–acceptor‐type 2,5‐diarylthiazoles with N,N‐dialkylamine groups of different chain lengths. The UV/Vis absorption, photoluminescence, and electrochemical behavior were similar regardless of chain length, whereas liquid‐crystalline behavior and thermal characteristics were found to be dependent on the alkyl‐chain length. The compounds with N,N‐diethylamine or N‐butyl‐N‐methyl groups showed a stable liquid‐crystalline phase over a wide temperature range as well as higher stability to thermal decomposition.     

Ruthenium–Porphyrin‐Catalyzed Diastereoselective Intramolecular Alkyl Carbene Insertion into CH Bonds of Alkyl Diazomethanes Generated In Situ from N‐Tosylhydrazones

With a ruthenium–porphyrin catalyst, alkyl diazomethanes generated in situ from N‐tosylhydrazones efficiently underwent intramolecular C(sp³)? H insertion of an alkyl carbene to give substituted tetrahydrofurans and pyrrolidines in up to 99 % yield and with up to 99:1 cis selectivity. The reaction displays good tolerance of many functionalities, and the procedure is simple without the need for slow addition with a syringe pump. From a synthetic point of view, the C? H insertion of N‐tosylhydrazones can be viewed as reductive coupling between a C?O bond and a C? H bond to form a new C? C bond, since N‐tosylhydrazones can be readily prepared from carbonyl compounds. This reaction was successfully applied in a concise synthesis of (±)‐pseudoheliotridane.     

Revisiting the crystallization of poly(2‐alkyl‐2‐oxazoline)s

Poly(2‐alkyl‐2‐oxazoline)s (PAOx) exhibit different crystallization behavior depending on the length of the alkyl side chain. PAOx having methyl, ethyl, or propyl side chains do not show any bulk crystallization. Crystallization in the heating cycle, that is, cold crystallization, is observed for PAOx with butyl and pentyl side chains. For PAOx with longer alkyl side chains crystallization occurs in the cooling cycle. The different crystallization behavior is attributed to the different polymer chain mobility in line with the glass transition temperature (T_g) dependency on alkyl side chain length. The decrease in chain mobility with decreasing alkyl side chain length hinders the relaxation of the polymer backbone to the thermodynamic equilibrium crystalline structure. Double melting behavior is observed for PButOx and PiPropOx which is explained by the melt‐recrystallization mechanism. Isothermal crystallization experiments of PButOx between 60 and 90 °C and PiPropOx between 90 and 150 °C show that PAOx can crystallize in bulk when enough time is given. The decrease of T_g and the corresponding increase in chain mobility at T > T_g with increasing alkyl side chain length can be attributed to an increasing distance between the polymer backbones and thus decreasing average strength of amide dipole interactions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 721–729     

Ruthenium–Porphyrin‐Catalyzed Diastereoselective Intramolecular Alkyl Carbene Insertion into C?H Bonds of Alkyl Diazomethanes Generated In Situ from N‐Tosylhydrazones

With a ruthenium–porphyrin catalyst, alkyl diazomethanes generated in situ from N‐tosylhydrazones efficiently underwent intramolecular C(sp³) H insertion of an alkyl carbene to give substituted tetrahydrofurans and pyrrolidines in up to 99 % yield and with up to 99:1 cis selectivity. The reaction displays good tolerance of many functionalities, and the procedure is simple without the need for slow addition with a syringe pump. From a synthetic point of view, the C H insertion of N‐tosylhydrazones can be viewed as reductive coupling between a CO bond and a C H bond to form a new C C bond, since N‐tosylhydrazones can be readily prepared from carbonyl compounds. This reaction was successfully applied in a concise synthesis of (±)‐pseudoheliotridane.     

A Conformational Study of Cyclohexane‐1,3,5‐tricarbonitrile Derivatives

Cyclohexane‐1,3,5‐tricarbonitrile reached equilibrium having 1,3‐cis‐1,5‐cis and 1,3‐cis‐1,5‐trans isomers in a ratio of 3:7. The cis, cis‐isomer preferred the conformation with three equatorial cyano groups, where as the cis, trans‐isomer displayed two cyano groups on equatorial positions and another cyano group on axial position. Condensation of cis, cis‐cyclohexane‐1,3,5‐tricarbonitrile with L‐(S)‐valinol by the catalysis of ZnCl₂ in refluxing 1,2‐dichlorobenzene afforded two isomeric cyclohexane‐1,3,5‐trioxazolines in favor of the 1,3‐cis‐1,5‐trans isomer. Metalation of cis, cis‐cyclohexane‐1,3,5‐tricarbonitrile, followed by alkylations with dimethyl sulfate, benzyl bromide or allyl bromide, gave the cor responding trialkylation products with predominance of 1,3‐cis‐1,5‐trans isomers. The cis, trans‐isomer showed two cyano groups on axial positions and another cyano group on equatorial position, where as the cis, cis‐isomer exhibited three axial cyano groups. Treatment of trimethyl cis, cis‐cyclohexane‐1,3,5‐tricarboxylate with lithium diisopropylamide and dimethyl sulfate afforded mainly the trimethyl ester of Kemp's triacid, which showed three axial carboxylate groups. Two competitive factors, i.e. the steric effect of in coming electrophiles and the dipole‐dipole inter actions of the cyano or carboxylate groups, might inter play to give different stereoselectivities in these reaction systems.     

Effects of the alkyl side-chain length on the structures of poly[oxy(N-alkylsulfonylmethyl)ethylene]s

The structures of poly[oxy(N-alkylsulfonylmethyl)ethylene]s (ASE-Ns) were examined with X-ray, IR, DSC, and polarized optical microscopy. The structures of ASE-Ns were strongly dependent on the alkyl side-chain length. ASE-2 and ASE-3, the shortest ones, were amorphous materials. ASE-4 and ASE-5 showed nematic characteristics. ASE-6–ASE-12 had smectic A structures. ASE-14 and ASE-16 could be labeled as more ordered structures higher than smectic A (probably smectic B or smectic E). The d-spacings of the first small-angle reflections were double the most extended side-chain length and linearly increased with a slope of 2.50 Å per methylene unit, regardless of the structural phases. The maintenance of the double-layered structure in all ASE-Ns may be due to the strong dipole–dipole interactions at both sides of the layers against the main chain for all amorphous, nematic, and smectic phases of ASE-Ns. The double-layered structure was maintained above the isotropic temperature, indicating that dipole–dipole interactions were not destroyed although the alkyl side chains melted during the isotropic transition. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1868–1874, 2004     

Effects of alkyl chain length on properties of 1-alkyl-3-methylimidazolium fluorohydrogenate ionic liquid crystals

A series of 1‐alkyl‐3‐methylimidazolium fluorohydrogenate salts (C_xMIm(FH)₂F, x=8, 10, 12, 14, 16, and 18) have been characterized by thermal analysis, polarized optical microscopy, IR spectroscopy, X‐ray diffraction, and anisotropic ionic conductivity measurements. Liquid crystalline mesophases with a smectic A interdigitated bilayer structure are observed from C₁₀ to C₁₈, showing a fan‐like or focal conic texture. The temperature range of the mesophase increases with the increase in the alkyl chain length (from 10.1 °C for C₁₀MIm(FH)₂F to 123.1 °C for C₁₈MIm(FH)₂F). The distance between the two layers in the smectic structure gradually increases with increasing alkyl chain length and decreases with increasing temperature. Conductivity parallel to the smectic layers is around 10 mS cm^?1 regardless of the alkyl chain length, whereas that perpendicular to the smectic layers decreases with increasing alkyl chain length because of the thicker insulating sheet with the longer alkyl chain.     

Structure and reactivity of α,β-unsaturated ethers. III. Cationic copolymerizations of alkenyl alkyl ethers

The relative cationic polymerizabilities of the geometrical isomers of various alkenyl alkyl ethers were studied both in copolymerizations with each other and in their respective copolymerizations with vinyl isobutyl ether as standard. Copolymerizations were carried out in methylene dichloride at ?78°C. with boron trifluoride etherate as catalyst. The cis isomers have been found to be more reactive than the corresponding trans isomers. A primary alkyl substituent on the β-cis position of vinyl ethyl ether enhances the reactivity. Yet the steric effect is noticeable when the substituents are bulky. Compounds substituted with cis-β-isobutyl and with β-dimethyl showed little tendency to homopolymerization. It was proved that the polymer ends derived from cis and from trans monomers are respectively different in character because of the restricted rotation of the end unit around the terminal carbon–carbon bond. The alternation tendency, remarkable in the copolymerization of cis monomers with vinyl ether, was explained in terms of the cis-opening mechanism.     

Side chain liquid crystal poly(fumarate)s bearing tolane‐based mesogens

Cyanotolane or fluorotolane mesogens were for the first time introduced into the fumarate monomer under basic conditions. All fumarate monomers undergo radical polymerization in benzene in the presence of dimethyl 2,2′‐azobis(isobutyrate) as an initiator at 60 °C, affording the corresponding poly(fumarate)s with a molecular weight (M_n) of ～ 10⁴ and an exceptionally narrow polydispersity. The phase behaviors of the fumarate monomers and the correspoding poly(fumarate)s were comprehensively investigated by differential scanning calorimetry (DSC), polarized optical microscopy (POM), and X‐ray diffraction (XRD) analysis. For the fumarate monomers, fluorotolane derivatives were prone to form higher‐order liquid crystal phases such as a smectic phase, while cyanotolane derivatives tended to show a wide mesophase temperature range, depending on the alkyl chain spacer length. Very surprisingly, these features dramatically weakened when they were polymerized. The mesophase temperature ranges became narrow and completely disappeared for the poly(fumarate)s with a shorter alkyl chain spacer. A nematic phase representing lower‐order arrangements became a predominant liquid crystal phase for the poly(fumarate) carrying cyanotolane mesogens. Only the poly(fumarate) carrying fluorotolane mesogens with a longer alkyl chain spacer displayed the characteristic XRD patterns of the smectic B phase. The transient photocurrent measurements of the fumarate monomer with cyanotolane mesogens displayed a hole mobility of the order of 10^?4–10^?5 cm² V^?1 s^?1 at room temperature. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5101–5114, 2008     

Geometry and bond‐length alternation in nonlinear optical materials. II. Effects of donor strength in two push–pull molecules

The compounds N‐[2‐(4‐cyano‐5‐dicyanomethylene‐2,2‐dimethyl‐2,5‐dihydrofuran‐3‐yl)vinyl]‐N‐phenylacetamide, C₂₀H₁₆N₄O₂,(I), and 2‐{3‐cyano‐5,5‐dimethyl‐4‐[2‐(piperidin‐1‐yl)vinyl]‐2,5‐dihydrofuran‐2‐ylidene}malononitrile 0.376‐hydrate, C₁₇H₁₈N₄O·0.376H₂O, (II), are novel push–pull molecules. The significant bonding changes in the polyene chain compared with the parent molecule 2‐dicyanomethylene‐4,5,5‐trimethyl‐2,5‐dihyrofuran‐3‐carbonitrile are consistent with the relative electron‐donating properties of the acetanilido and piperidine groups. The packing of (I) utilizes one phenyl–cyano C—H...N and two phenyl–carbonyl C—H...O hydrogen bonds. Compound (II) crystallizes with a partial water molecule (0.376H₂O), consistent with cell packing that is dominated by attractive C—H...N(cyano) interactions. These compounds are precursors to novel nonlinear optical chromophores, studied to assess the impact of donor strength and the extent of conjugation on bond‐length alternation, crystal packing and aggregation.     

Synthesis and phase behaviors of side‐chain liquid‐crystalline polymers containing azobenzene mesogen with the different length alkyl tail

A series of side‐chain liquid‐crystal polymers, poly[6‐[4‐(4′‐n‐alkyl benzoateazo)phenoxy]‐hexylmethacrylate]s (PMAzoCOOR_m, m = 1, 2, 3, 4, 5, 6, 8, 10, 14, and 18) have been prepared by two synthetic methods. The chemical structure of the monomers was confirmed by ¹H NMR and mass spectrometry. The molecular characterizations of the polymers were performed with ¹H NMR and gel permeation chromatograph. The phase behaviors of polymers were investigated by the combination of techniques including differential scanning calorimetry, polarized optical microscopy, and small‐angle X‐ray scattering. For m = 1, 2, 3, 4, 5, and 6, the polymers exhibited a monosmectic A phase in which the smectic layer period was almost identical to the side‐chain length. In addition, for m = 2, 3, 4, and 5, they presented the monosmectic C phase in low temperature; moreover, the tilt angle increased from 23.3 to 40.5°. For m = 8, 10, 14, and 18, the polymers showed a bilayer smectic A phase in which the layer spacing was larger than a fully extended side chain but less than two extended chains. On the other hand, for the clearing point, with the increasing of m, it first decreased, and then increased. All of these indicated that the length of alkyl tails played an important role in the phase behaviors of these polymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2759–2768     

Synthesis of methyl‐substituted azobenzene–carbazole conjugated copolymers with photoinduced structural changes

Azobenzene switches its structure instantaneously by reversible trans‐to‐cis and cis‐to‐trans photoisomerization with light irradiations. Dynamic change in polymer structure is expected via introducing an azobenzene unit into the main chain. In this study, a set of methyl‐substituted azobenzene–carbazole conjugated copolymers is synthesized by the Suzuki–Miyaura coupling method. Introduction of methyl substituents to the azobenzene unit of the monomer, and polymerization in a high‐boiling solvent improve the molecular weight of the polymer. Decrease of effective conjugation length due to the twisted structure of the main chain allows progress of photoisomerization. The microstructure of the polymer was determined with grazing incidence X‐ray diffraction (GIXD) measurements using synchrotron radiation. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1756–1764     

2-[4-Alkenyloxy)phenyl]-5-alkylpyrimidines The relationship between position and nature (E/Z) of the double bond and transition temperatures

Abstract

The 5-n-alkyl-2-[4-(n-alkoxy)phenyl]pyrimidmes are essential components of most commercial chiral smectic C mixtures for electrooptic display devices based on ferroelectric effects. This is due to their generally relatively low melting points, enantiotropic, relatively wide range smectic C mesophases, low viscosity and ease of preparation. An unsaturated carbon–carbon double bond has now been introduced into the terminal alkoxy chain of the 5-n-alkyl-2-[4-(alkoxy)phenyl]pyrimidines to produce the corresponding alkenyloxy substituted derivatives. The position and nature (E/Z) of the double bond has been varied systematically and the effect on the liquid crystal transition temperatures studied. A number of homologous series of the most interesting alkenyloxy substituted materials has been prepared and evaluated. The position and nature (E/Z) of the double bond changes the conformation of the alkenyloxy chain substantially. This can result in significantly higher smectic C transition temperatures for compounds with a trans double bond (E) at an even number of carbon atoms from the molecular core. Significantly lower transition temperatures (including the melting point) are observed for materials with a cis double bond (Z) at an odd number of carbon atoms from the molecular core. Comparisons with the corresponding alkoxy substituted materials (i.e. without a double bond) are made.     

Polar aspects of intramolecular interactions in 2‐amino‐5‐nitro‐4‐methylpyridines and 2‐amino‐3‐nitro‐4‐methylpyridines

The dipole moments of twelve 2‐N‐substituted amino‐5‐nitro‐4‐methylpyridines ( I‐XII ) and three 2‐N‐substituted amino‐3‐nitro‐4‐methylpyridines ( XIII‐XV ) were determined in benzene. The polar aspects of intramolecular charge‐transfer and intramolecular hydrogen bonding were discussed. The interaction dipole moments, μ_int, were calculated for 2‐N‐alkyl(or aryl)amino‐5‐nitro‐4‐methylpyridines. Increased alkylation of amino nitrogen brought about an intensified push‐pull interaction between the amino and nitro groups. The solvent effects on the dipole moments of 2‐N‐methylamino‐5‐nitro‐4‐methyl‐( I ), 2‐N,N‐dimethylamino‐5‐nitro‐4‐methyl‐ ( II ) and 2‐N‐methylamino‐3‐nitro‐4‐methylpyridines ( XIII ) were different. Specific hydrogen bond solute‐solvent interactions increased the charge‐transfer effect in I , but it did not disrupt the intramolecular hydrogen bond in XIII.     

Side‐chain liquid crystalline polyacrylates containing 3,4‐disubstituted pyrrole moiety

Polymerization of liquid crystalline bifunctional monomer N‐{{ω‐{4‐[4‐(11‐acryloyloxy)undecanoxybenzoyl]biphenyleneoxy} alkyl}}‐3,4‐dimethylpyrrole gave a side‐chain liquid crystalline polyacrylate containing 3,4‐dimethylpyrrole group. Liquid crystallinity was determined by DSC and optical polarizing microscope measurements. The monomers having pentylene, hexylene, and decylene as the alkylene spacer group between the mesogenic unit and the 3,4‐dimethylpyrrole group exhibited smectic and nematic phases on the heating and cooling stages. The radically polymerized polyacrylate derivatives containing the 3,4‐dimethylpyrrole group showed nematic phases on the heating and cooling stages. These polymers are the first example of side‐chain liquid crystalline polymers containing 3,4‐dimethylpyrrole as functional group for further reaction. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1214–1221, 2000     

Free radical polymerization with catalytic chain transfer: Using NMR to probe the strength of the cobalt–carbon bond in small molecule model reactions

This work examines cobalt–carbon bond formation between the cobalt (II) macrocycle, (tetrakis(p‐methoxyphenyl)porphyrinato)cobalt (II), (TAP)Co, and a variety of radicals derived from vinyl compounds to facilitate a better understanding of the various factors affecting the cobalt–carbon bond strength in catalytic chain transfer polymerization. The reaction of (TAP)Co with the following vinylic molecules was studied: methacrylonitrile, cyclohexene, methyl methacrylate, styrene, methyl acrylate, vinyl acetate, vinyl benzoate, methyl crotonate, cis‐2‐pentenenitrile, and ethyl α‐hydroxymethacrylate. Different concentrations of each vinylic compound were added to (TAP)Co and 2,2′‐azobis(isobutyronitrile) in CDCl₃ at 60 °C. The ratio of Co(III) to Co(II) and the nature of the radical bound to the cobalt macrocycle were determined via nuclear magnetic resonance measurements. Several factors are shown to affect the reaction of the radical and the cobalt (II) species (and hence the strength of the cobalt–carbon bond in the resulting compound). These factors are as follows: the number of pathways by which a radical may be derived from the vinyl compound; the variety of radicals that can be produced from the vinylic molecule; the stability of the radical(s) generated; and the relative propagation rate of the vinyl compound. A discussion on the relevance of this study to the behavior of different monomers in catalytic chain transfer reactions is included. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6171–6189, 2006     

Synthesis and hierarchical superstructures of side‐chain liquid crystal polyacetylenes containing galactopyranoside end‐groups

Three kinds of chiral saccharide‐containing liquid crystalline (LC) acetylenic monomers were prepared by click reaction between 2‐azidoethyl‐2,3,4,6‐tetraacetyl‐β‐D ‐galactopyranoside and 1‐biphenylacetylene 4‐alkynyloxybenzoate. The obtained monomers were polymerized by WCl₆‐Ph₄Sn to form three side‐chain LC polyacetylenes containing 1‐[2‐(2,3,4,6‐tetraacetyl‐β‐D ‐galactopyranos‐1‐yl)‐ethyl]‐1H‐[1,2,3]‐triazol‐4′‐biphenyl 4‐alkynyloxybenzoate side groups. All monomers and polymers show a chiral smectic A phase. Self‐assembled hiearchical superstructures of the chiral saccharide‐containing LCs and LCPs in solution state were studied by field‐emission scanning electron microscopy. Because of the LC behavior, the LC molecules exhibit a high segregation strength for phase separation in dilute solution (THF/H₂O = 1:9 v/v). The self‐assembled morphology of LC monomers was dependent upon the alkynyloxy chain length. Increasing the alkynyloxy chain length caused the self‐assembled morphology to change from a platelet‐like texture ( LC‐6 ) to helical twists morphology ( LC‐11 and LC‐12 ). Furthermore, the helical twist morphological structure can be aligned on the polyimide rubbed glass substrate to form two‐dimensional ordered helical patterns. In contrast to LC monomers, the LCP‐11 self‐assembled into much more complicate morphologies, including nanospheres and helical nanofibers. These nanofibers are evolved from the helical cables ornamented with entwining nanofibers upon natural evaporation of the solution in a mixture with a THF/methanol ratio of 3:7. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6596–6611, 2009