Preparation,characterization and photocatalytic properties of BiOBr/ZnO composites

BiOBr/ZnO composite photocatalysts were prepared by a simple hydrothermal method. The as-prepared samples were characterized by X-ray diffraction(XRD), scanning electron microscopy(SEM), transmission electron microscopy(TEM), high-resolution transmission electron microscopy(HRTEM), UV–Vis diffusion reflectance spectroscopy(DRS) and photoluminescence(PL) spectroscopy, respectively. The photocatalytic activities were evaluated by the degradation of methyl blue(MB) under the simulated sunlight irradiation. Among all the samples, the BiOBr/ZnO composite with a mole ratio of 3:1(Bi:Zn) exhibited the best photocatalytic activity. The improvement of photocatalytic activity was mainly attributed to the low recombination ratio of photo-induced electron-hole pairs. The possible photocatalytic mechanism was discussed on the basis of the band structures of BiOBr and ZnO.     

Synthesis, characterization, and tunable optical properties of hollow gold nanospheres

Nearly monodisperse hollow gold nanospheres (HGNs) with tunable interior and exterior diameters have been synthesized by sacrificial galvanic replacement of cobalt nanoparticles. It is possible to tune the peak of the surface plasmon band absorption between 550 and 820 nm by carefully controlling particle size and wall thickness. Cobalt particle size is tunable by simultaneously changing the concentration of sodium borohydride and sodium citrate, the reducing and capping agent, respectively. The thickness of the gold shell can be varied by carefully controlling the addition of gold salt. With successful demonstration of ensemble as well as single HGN surface-enhanced Raman scattering, these HGNs have shown great potential for chemical and biological sensing applications, especially those requiring nanostructures with near-IR absorption.     

Synthesis, characterization, and photocatalytic properties of surface-modified, silver-doped ZnO

Hydrothermal synthesis of silver-doped modified ZnO was carried out in the presence of a surface modifier. The experimental conditions were maintained constant (ZnO = 4 M; T = 250 °C; P = autogenous; Solvent = 1 N HCl; Duration = 24 h). Caprylic acid was used as a surface modifier with varying concentration from 0.1 to 2 mL. The experiments were carried out with Ag doping from 1 to 5 wt%. Hydrophobic silver-doped ZnO modified with caprylic acid was subjected to a systematic characterization using powder XRD, SEM, FTIR, and photocatalytic properties using Indigo Carmine dye.     

Hydrangea-like ZnO nanospheres on Al substrates via hydrothermal synthesis for photocatalytic activity

Hydrangea-like ZnO nanospheres were fabricated on Al substrates via a facile hydrothermal method with only one step. Scanning electron microscopy, energy-dispersive spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and photoluminescence were used to investigate their morphology, component, structure, and optical properties. The hierarchical nanospheres are fabricated by 2D nanosheets with the shape of 3D sphere. By adjusting the reaction time, the formation process was monitored. The photocatalytic activity of ZnO nanospheres was also investigated for their dye degradation, and they exhibit good photocatalytic ability to congo red, with the degradation rate of 98.4%. Besides, they have universal catalysis effect on methyl orange.     

Preparation and optical properties of SrF2:Eu nanospheres

SrF₂:Eu³⁺ nanospheres with homogeneous diameter have been synthesized by a microemulsion-mediated hydrothermal method for the first time, in which quaternary microemulsion of CTAB/water/cyclohexane/n-pentanol was used. The possible reaction mechanism and the luminescent properties of SrF₂:Eu³⁺ nanospheres were also investigated in this paper. The morphology and grain sizes of final products were characterized by field emission scanning electron microscopy and transmission electron microscopy, indicating that most of the products were nanospheres with an average diameter of ∼50 nm. Room-temperature emission spectra, recorded under 394-nm excitation, showed that the transition of ⁵D₀ → ⁷F₁ emission be dominating in SrF₂:Eu³⁺ nanospheres. From the dependence of the luminescence intensity on the concentration of Eu³⁺ ions, the optimal dopant concentration is 2 mol%.     

Synthesis,optical properties,and photocatalytic activity of lanthanide-doped anatase

Quasi-one-dimensional (1D) Ti_{1 ? x} Ln _x O_{2 ? x/2} anatase solid solutions were prepared by heating Ti_{1 ? x} Ln _x (OCH₂CH₂O)_{2 ? x/2} precursors, where Ln = Nd, Eu, Tb, Er (x = 0.025), or Sm (0.005 ≤ x ≤ 0.025), in air. These solid solution were found to have a photocatalytic activity in hydroquinone oxidation in aqueous solution under exposure to UV radiation. UV-Vis absorption spectra were recorded for Ti_{1 ? x} Ln _x O_{2 ? x/2} (Nd, Sm, Eu, Tb, or Er). The electronic structure and optical absorption spectra were calculated for anatase doped with neodymium, samarium, or terbium.     

Nearly monodispersed ZnS nanospheres: Synthesis and optical properties

ZnS nanoparticles of diameters of 3–4 nm were self-assembled to form dense nanospheres of sizes 100 nm by a colloidal precipitation method using PVP as the stabilizing agent. Studies indicated that the ZnS nanoparticles maintained their individual properties inside the nanospheres. Optical absorption spectra of the samples demonstrated the effect of quantum confinement in the ZnS nanocrystals. Room temperature photoluminescence measurements showed a sharp UV emission at 370 nm, attributed to sulfur vacancies.     

Influence of different precursors and Mn doping concentrations on the structural,optical properties and photocatalytic activity of single-crystal manganese-doped ZnO

Mn-doped ZnO single-crystal micronuts were synthesized via hydrothermal method in an hexamethylenetetramine aqueous solution. These micronuts are of wurtzite crystal structure. The effects of Mn doping amount and precursor concentration on the structural, optical properties and photocatalytic activity have been investigated. The synthesized Mn-doped ZnO was characterized by X-ray powder diffraction, field emission scanning electron microscopy (FESEM), UV–Vis absorption and photoluminescence spectroscopy. The structural analyses based on X-ray diffraction revealed the absence of Mn-related secondary phases. According to FESEM results, the length of ZnO micronuts was in the range of 5–8 μm. The band gap energy increased on increasing Mn doping concentration. The photocatalytic activity was studied by degradation of methyl orange aqueous solution, which showed that the Mn-doped ZnO micronuts prepared in precursor concentration of 0.1 M and 4% Mn doping had the highest photocatalytic activity. The effects of crystal defect and band gap energy on photocatalytic activity of Mn-doped ZnO samples were studied in different precursors and Mn doping amounts.     

Preparation, characterization, and photocatalytic activity of polyaniline/ZnO nanocomposite

Polyaniline (PANI)/zinc oxide (ZnO) nanocomposite was synthesized by in-situ polymerization. X-ray diffraction patterns, UV?Cvisible spectroscopy, SEM, and TEM were used to characterize the composition and structure of the nanocomposite. Nanostructured PANI/ZnO composite was used as photocatalyst in the photodegradation of methylene blue dye molecules in aqueous solution. The photocatalytic activity of PANI/ZnO nanocomposite under UV and visible light irradiation was evaluated and was compared with that of ZnO nanoparticles. ZnO/PANI core?Cshell nanocomposite had greater photocatalytic activity than ZnO nanoparticles and pristine PANI under visible light irradiation. According to these results, application of PANI as a shell on the surface of ZnO nanoparticles causes the enhanced photocatalytic activity of the PANI/ZnO nanocomposite. Also UV?Cvisible spectroscopy studies showed that the absorption peak for PANI/ZnO nanocomposite has a red shift toward visible wavelengths compared with the ZnO nanoparticles and pristine PANI. The effect of different operating conditions on the photocatalytic performance of PANI/ZnO nanocomposite in the photodegradation of methylene blue dye molecules was investigated in a bath experimental setup.     

A simple solvothermal route towards the morphological control of ZnO and tuning of its optical and photocatalytic properties

ZnO nanoparticles with different morphologies were solvothermally synthesized by controlling the alkali (sodium hydroxide) concentration in an isopropanol solution. The products were characterized by means of powder X-ray diffraction, UV-visible absorption spectra, scanning electron microscopy, transmission electron microscopy, and selected area electron diffraction. The morphologies of the formed ZnO nanocrystals were dependent on the concentration of the alkali, and with increases of sodium hydroxide concentration, the ZnO nanocrystals evolved from rod to hexagonal bipyramid, and then to a flower-like nanostructure. The flower-like nanostructure resulted from the etching of the hexagonal bipyramid by the excess alkali. The photoluminescence and photocatalytic properties of the prepared ZnO were investigated. The difference of green emission among the ZnO nanocrystals indicated that a higher sodium hydroxide concentration led to a higher level of defects. The size, the surface structure and defects in the ZnO nanocrystals affected its photo-degradation characteristics.     

Cerium-doped mesoporous BaTiO3/TiO2 nanocomposites: structural,optical and photocatalytic properties

Research on Chemical Intermediates - Nanoscale composite materials based on cerium, barium titanate and titanium dioxide were synthesized by thermal hydrolysis. The obtained individual TiO2, BaTiO3...     

Large-scale synthesis of ZnO balls made of fluffy thin nanosheets by simple solution process: structural, optical and photocatalytic properties

This paper reports a large-scale synthesis of ZnO balls made of fluffy thin ZnO nanosheets by simple solution process at low-temperature of 65±2°C. The synthesized ZnO structures were characterized in detail in terms of their morphological, structural, optical and photocatalytic properties. The detailed morphological characterizations, done by field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM), confirmed that the synthesized products are ZnO balls which are made by accumulation of hundreds of thin ZnO nanosheets. Interestingly, it is seen that the nanosheets are arranged in such a special fashion that they made ball-like morphologies. Detailed structural examinations revealed that of as-synthesized ZnO products are well-crystalline and possessing wurtzite hexagonal phase. The optical property, measured by UV-Visible spectroscopy, substantiated good optical properties for as-synthesized ZnO balls. The as-synthesized ZnO balls were utilized as an efficient photocatalysts for the photocatalytic degradation of methylene blue (MB) dye. Almost complete degradation of MB was observed in presence of ZnO balls composed of nanosheets within 70 min under UV-light irradiation. By comparing the photocatalytic performance with commercially available TiO(2)-UV-100, it was observed that the synthesized ZnO balls exhibited superior photocatalytic performance as compared to TiO(2)-UV-100 photocatalyst.     

Electrical transport properties of Zn doped ZnO

Electrical resistivity and Hall effect measurements at 77–373°K are presented for Zn doped ZnO crystals. The crystals have been doped systematically at 600–1100°C in controlled pressures of Zn. The concentration of electrons at room temperature is in the range n_RT = 2.5 × 10¹⁶, to 3.6 × 10¹⁸, cm^?3. The donor level E_D and the concentrations of donors N^D and acceptors N_A have been calculated from a best fit to the experimental relationships log n versus $\text{1}\text{T}$ and log μ_H versus log T. At dilute concentrations of donors, two donor levels have been observed, E_D^I = 0.043–0.045 eV and a deeper level E^II_D greater than 0.165 eV. The ZnO was found to behave as a metal at N_D ～ 6 × 10¹⁸, cm^?3.At least two different donors have to be assumed in order to explain the experimental results. It is suggested that interstitial Zn is the electrical active donor at higher doping levels. The nature of the other donor is not clear. Neither 1s¹ H-type nor 1s² He-type donors seem to explain all the observations consistently.     

Shape-controlled fabrication of porous ZnO architectures and their photocatalytic properties

In this paper, we report a simple two-step approach to prepare porous octahedron- and rod-shaped ZnO architectures. The morphology of porous ZnO particles can be conveniently tuned by controlling morphologies of the ZnC₂O₄·2H₂O precursor. SEM and TEM characterization results indicate that these porous ZnO architectures are built up by numerous ZnO primary nanoparticles with random attachment. Based on thermogravimetry analysis, we believe that the release of water vapor, CO and CO₂ leads to the formation of high-density pores in shape-controlled particles during the calcination process. Further experimental results indicate that as-prepared porous ZnO particles exhibit good photocatalytic activity due to large surface area.     

Optical and photocatalytic properties of quasi-one-dimensional ZnO activated by carbon

1. Download : Download full-size image

     

Structural, optical, and magnetic properties of Mn-doped ZnO thin film

The Zn(1-x)Mn(x)O (x = 0, 0.16, and 0.25) thin films were grown on fused quartz substrates by reactive magnetron cosputtering. X-ray-diffraction measurement revealed that all the films were single phase and had wurtzite structure with c-axis orientation. As Mn concentration increased in the Zn(1-x)Mn(x)O films, the c-axis lattice constant and band-gap energy increased gradually. In Raman-scattering studies, an additional Mn-related vibration mode appeared at 520 cm(-1). E(2H) phonon line of Zn(1-x)Mn(x)O alloy was broadened asymmetrically and redshifted as a result of microscopic structural disorder induced by Mn(2+) random substitution. The Zn(0.84)Mn(0.16)O film exhibited a ferromagnetic characteristic with a Curie temperature of approximately 62 K. However, with increasing Mn concentration to 25 at. %, ferromagnetism disappeared due to the enhanced antiferromagnetic superexchange interactions between neighboring Mn(2+) ions.     

The synthesis and optical properties of the heterostructured ZnO/Au nanocomposites

ZnO/Au heterostructured nanoparticles were formed through epitaxial growth of Au on the ZnO seeds. The morphology and structure of ZnO/Au nanocomposites were investigated by TEM and XRD analysis. The nanocontact between Au and ZnO results in red-shift of surface plasmon of the Au and increase the intensity of Raman signals of ZnO. Heterostructured ZnO/Au nanocomposites also enhance chemical stability of ZnO in aqueous solution.     

Optical,magnetic and photocatalytic properties of magnetically separable Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>-doped ZnO and pristine ZnO nanospheres

This work focussed on the optical, magnetic and photocatalytic properties of sol–gel-synthesized Fe₃O₄-doped ZnO nanospheres and was compared with pristine ZnO nanospheres. The crystalline phase of Fe₃O₄-doped ZnO nanospheres was studied with X-ray diffraction analysis and was well matched with standard pattern. Surface morphology was studied with HR-SEM images and EDAX spectrum. Furthermore, elemental mapping analysis was carried out to confirm the presence of Fe₃O₄ phase in Fe₃O₄-doped ZnO nanospheres. FT-Raman spectral studies show that a strong intense peak at 670 cm^?1 indicates the presence of Fe₃O₄ in Fe₃O₄-doped ZnO nanospheres. The mean crystallite size of Fe₃O₄-doped ZnO nanospheres was 34 nm as calculated by Debye–Scherrer’s formula which confirmed with HR-TEM image. The SAED pattern shows the presence of (100), (101), (102) and (202) of ZnO phase and (400) of Fe₃O₄ phase, confirming the crystalline nature of Fe₃O₄-doped ZnO nanospheres. The vibrating sample magnetometer (VSM) result shows that Fe₃O₄-doped ZnO nanospheres possess superparamagnetic nature and the composite nanospheres are magnetically separable. The optical properties have been studied by diffuse reflectance spectroscopy and time-resolved photoluminescence spectra. Implantation of Fe₃O₄ in ZnO nanospheres modifies the UV absorption edge, and it displays near-band gap emission and deep-level emission. The photocatalytic activity of Fe₃O₄-doped ZnO nanospheres studied against rhodamine B dye is found higher than that of pristine ZnO nanospheres which shows that Fe₃O₄-doped ZnO nanospheres are a promising photocatalyst.     

Photocatalytic formation of porous CdS/ZnO nanospheres and CdS nanotubes

It was found that ZnO nanocrystals have photocatalytic activity in the formation of CdS during the reduction of sulfur in the presence of cadmium acetate. It was shown that mesoporous spheres measuring 150–170 nm and consisting of CdS/ZnO particles measuring 5–8 nm are formed during the irradiation of ZnO particles measuring 5.5 nm. During the photodeposition of CdS by the action of light on nanorods produced by ultrasonic treatment of microcrystalline zinc oxide nanotubes of CdS 0.5–0.8 μm in length and 15–110 nm in internal diameter are formed. A mechanism, in which they appear at the ends of the ZnO nanorods and grow on the surface of the CdS/ZnO heterojunction, is proposed for the formation of the CdS nanotubes. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 4, pp. 215–219, July–August, 2007.     

Synthesis of TiO2/ZrO2/SiO2 powders and their structural,optical and photocatalytic properties

Research on Chemical Intermediates - Ternary oxide powders based on titania, zirconia and silica have been synthesized by the sol–gel method. The characterization of the powders was performed...