Spherical Zinc Oxide Nano Particles from Zinc Acetate in the Precipitation Method

The liquid precipitation method using zinc acetate dihydrate was applied for the synthesis of uniform and spherical ZnO nanoparticles. The ultrafine zinc oxid was prepared in a water‐ethanol mixture solution. The solution containing zinc cation was soluble in water. The surface‐active agent triethanolamine (TEA) was soluble in ethanol. Then alkali precipitated by adding n‐propylamine. The spherical zinc oxide particle morphology was found to be highly dependent on the zinc salt concentration, ethanol‐water ratio, and the surface‐active agent additive. The process can produce white ZnO powder of 50–90 nm in size. The morphology of zinc oxide showed a powder shape by transmission electron microscopy (TEM), the crystallization phase structure of zinc oxide by X‐ray diffraction (XRD), and the zinc oxide remaining by using an organic analysis by infrared spectroscopy (IR).     

The gelation of hydroxypropyl guar gum by nano‐ZrO2

In the study, hydroxypropyl guar gum (HPG) gel is prepared by using Nano‐ZrO₂ particles as the cross‐linking agent. The Nan‐ZrO₂ particles are prepared by using oil‐water interface method. The physical properties such as morphology, particle size, and crystal structure of the Nano‐ZrO₂ particles are analyzed by SEM, particle size analyzer, FT‐IR, and XRD, respectively. The results show that the Nano‐ZrO₂ particles are spherical particles with a little agglomeration; these spherical particles have a tetragonal structure and higher crystallinity, and the mean diameter of the first‐level grain is 24 nm. The rheological properties including shear stress, complex modulus, elasticity modulus (G′), and viscosity modulus (G′′) of the Nano‐ZrO₂ cross‐linked HPG gel are investigated. The results show that the Nano‐ZrO₂ cross‐linked HPG gel is a pseudo‐plastic non‐Newtonian fluid with higher elastic modulus (G′ > G′′) and lower tanδ (tanδ < 1, the ratio of viscous and elastic modulus), which indicate that the Nano‐ZrO₂ cross‐linked HPG gel may have potential application in fracturing.     

Preparation of crystalline gold nanoparticles at the surface of mixed phosphatidylcholine-ionic surfactant vesicles

The formation of gold nanoparticles and the crystal growth at the surface of mixed phosphatidylcholine (PC)-ionic surfactant vesicles was investigated. The PC-bilayer surface was negatively charged by incorporating sodium dodecyl sulfate (SDS) and positively charged by adding hexadecyltrimethylammonium chloride (CTAB). The mass ratio phosphatidylcholine:surfactant was fixed in both cases at 1:1. The gold nanoparticle formation was studied by using transmission electron microscopy (TEM) combined with dynamic light scattering (DLS) and UV-vis absorption spectroscopy. TEM micrographs confirm that the particle formation occurs on the vesicle surface. However, the reduction process depends on the ionic surfactant incorporated into the vesicles, the vesicle size distribution, as well as the temperature used for the reduction process. Thereby, it becomes possible to control the crystal growth of the individual spherical gold nanoparticles in a characteristic way. Red colored colloidal dispersions consisting of monodisperse spherical nanoparticles with an average particle size between 2 and 8 nm (determined by dynamic light scattering) can be obtained by using a monodisperse SDS-modified vesicle phase. When the temperature is increased to 45 degrees C, a crystallization in rod-like or triangular structures is observed. In the CTAB-based template phase in general larger gold particles of about 35 nm are formed. In similarity to the anionic vesicles a temperature increase leads to the crystallization in triangular structures.     

Synthesis and Cytotoxicity of Dendritic Platinum Nanoparticles with HEK‐293 Cells

Dendritic platinum nanoparticles (DPNs) have been synthesized from l ‐ascorbic acid and an amphiphilic non‐ionic surfactant (Brij‐58) via a sonochemical method. The particle size and shape of the DPNs could be tuned by changing the reduction temperature, resulting in a uniform DPN with a size of 23 nm or 60 nm. The facets of DPNs have been studied by high‐resolution transmission electron microscopy. The cytotoxicity of DPNs has been investigated using human embryonic kidney cells (HEK‐293), and the biological adaptability exhibited by DPNs has opened a pathway to biomedical applications such as drug‐delivery systems, photothermal treatment, and biosensors.     

气相合成SnO2超微粒薄膜研究

用直流气体放电活化反应蒸发法在玻璃基片上沉积的SnO2超微粒薄膜,研究其过程中各工艺参数对薄膜结构的影响及作用机理.结果表明, SnO2超微粒薄膜粒径随氧分压增加而增大;蒸镀时间的延长有助于SnO2的生成,也使薄膜发生晶化;而增加放电电压,则薄膜出现外延单晶生长趋势.     

Preparation of non‐spherical particles from amphiphilic block copolymers

Simple self‐assembly techniques to fabricate non‐spherical polymer particles, where surface composition and shape can be tuned through temperature and the choice of non‐solvents was developed. A series of amphiphilic polystyrene‐b‐poly(2‐ethyl‐2‐oxazoline) block copolymers were prepared and through solvent exchange techniques using varying non‐solvent composition a range of non‐spherical particles were formed. Faceted phase separated particles approximately 300 nm in diameter were obtained when self‐assembled from tetrahydrofuran (THF) into water compared with unique large multivesicular particles of 1200 nm size being obtained when assembled from THF into ethanol (EtOH). A range of intermediate structures were also prepared from a three part solvent system THF/water/EtOH. These techniques present new tools to engineer the self‐assembly of non‐spherical polymer particles. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 750–757     

烷基咪唑离子液体CnmimCl(n=4, 6, 8)对CL-20重结晶的影响

六硝基六氮杂异戊兹烷(CL-20)是高能量密度材料的典型代表之一。重结晶制备高品质CL-20的一个重要难题是晶体微观结构的调控。本文通过在CL-20重结晶过程中加入微量离子液体作为晶形控制剂,探究离子液体浓度、种类和添加方式(加入溶剂或者反溶剂)对CL-20晶体微观结构的影响规律。结果表明：通过改变离子液体的添加方式、种类和浓度,能够实现CL-20晶体尺寸和晶体形貌的调控。热分析结果表明：离子液体的加入可以使ε到γ晶型转变温度提前多达12.6℃;重结晶CL-20的分解峰温和热稳定性提高,放热量增加,最高可达1344 J·g^-1。溶剂中1-己基-3-甲基咪唑氯盐(DmimCl)的加入,能够结晶出没有尖锐棱边和角的类八面体形CL-20晶体,晶粒细小,分解峰温均提高了6℃以上,放热量均在1100 J·g^-1以上,是较理想的晶形控制剂。     

Diene‐based polymer nanoparticles: Preparation and direct catalytic latex hydrogenation

The diene‐based polymer nanoparticles represented by poly(butadiene‐co‐acrylonitrile) were prepared in the semibatch emulsion polymerization system using Gemini surfactant (GS) trimethylene‐1,3‐bis(dodecyldimethylammonium bromide) as the emulsifier. The nanoparticles within the range of 17–54 nm were achieved with narrow molecular weight and particle size distributions. A spherical morphology was observed for the produced nanoparticles. The effects of GS concentration on the particle size, molecular weight, polymerization conversion and solid content, and composition of copolymer were investigated. The semibatch process using monomeric and conventional surfactant sodium dodecyl sulfate (SDS) was compared. At the second stage of this study, the prepared unsaturated nanoparticles were employed as the substrates for the latex hydrogenation in the presence of Wilkinson's catalyst, that is, RhCl(P(C₆H₅)₃)₃. The effects of the particle size and catalyst concentration on the latex hydrogenation rate were investigated. The particle size is found to have a significant effect on the reaction rate. When the 17‐nm nanoparticles were used as the substrates, a high conversion of 95 mol % was obtained within 18 h using only 0.1 wt % RhCl(P(C₆H₅)₃)₃. The latex hydrogenation process was completely free of organic solvents. The present synthesis and following “green” hydrogenation process can be extended to latices made from semibatch emulsion containing other diene‐based polymers. This study shows great promise for decreasing the demanded quantity of expensive catalyst and eliminating the organic solvent in the hydrogenation process. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Cooperative Self‐Assembly‐Assisted Formation of Monodisperse Optically Active Spherical and Anisotropic Nanoparticles

We report a new method in which spontaneous self‐assembly is employed to synthesize monodisperse polymer nanoparticles with controlled size (<50 nm), shape, tunable functionality, and enhanced solvent and thermal stability. Cooperative noncovalent interactions, such as hydrogen bonding and aromatic π–π stacking, assist self‐assembly of amphiphilic macromolecules (polystyrene‐block‐polyvinylpyridine, PS? PVP) and structure directing agents (SDAs) to form both spherical and anisotropic solid polymer nanoparticles with SDAs residing in the particle core surrounded by the polymers. Through detailed investigations by scanning electron microscopy and transmission electron microscopy (TEM), we have rationalized nanoparticle morphology evolution and dependence on factors such as SDA concentration and PVP size. By keeping the PS chain size constant, the particle morphology progresses from continuous films to spherical particles, and on to cylindrical nanowires or rods with increasing the PVP chain size. The final nanoparticles are very stable and can be redispersed in common solvents to form homogenous solutions and thin films of ordered nanoparticle arrays through solvent evaporation processes. These nanoparticles exhibit tunable fluorescent colors (or emissions) depending on the choices of the central SDAs. Our method is simple and general without requiring complicated synthetic chemistry, stabilizing surfactants, or annealing procedures (e.g., temperature or solvent annealing), making scalable synthesis feasible.     

Synthesis of Supported Ultrafine Non‐noble Subnanometer‐Scale Metal Particles Derived from Metal–Organic Frameworks as Highly Efficient Heterogeneous Catalysts

The properties of supported non‐noble metal particles with a size of less than 1 nm are unknown because their synthesis is a challenge. A strategy has now been created to immobilize ultrafine non‐noble metal particles on supports using metal–organic frameworks (MOFs) as metal precursors. Ni/SiO₂ and Co/SiO₂ catalysts were synthesized with an average metal particle size of 0.9 nm. The metal nanoparticles were immobilized uniformly on the support with a metal loading of about 20 wt %. Interestingly, the ultrafine non‐noble metal particles exhibited very high activity for liquid‐phase hydrogenation of benzene to cyclohexane even at 80 °C, while Ni/SiO₂ with larger Ni particles fabricated by a conventional method was not active under the same conditions.     

Size-Controlled Synthesis of Nano-Zeolites and Their Application to Light Olefin Synthesis

For the application of zeolites as heterogeneous catalysts, low diffusion resistance for hydrocarbons within the micropore is essential for improving product selectivity and catalyst lifetime. This problem has been overcome by reducing the crystal size. This review introduces size-controlled preparation of nano-sized zeolites via hydrothermal synthesis in water/surfactant/organic solvent (emulsion method) and their application to heterogeneous catalysts. The ionicity of the hydrophilic group in surfactant molecules and the concentration of the Si source affected the crystallinity and morphology of zeolites prepared using the emulsion method. When using a non-ionic surfactant, mono-dispersed silicalite-1 nanocrystals ~60?nm in diameter were successfully prepared. Nano- and macro-ZSM-5 zeolites with crystal sizes of ~150?C200?nm and 1.5???m, respectively, were prepared and applied to n-hexane cracking and acetone-to-olefin reactions to investigate the effect of zeolite crystal size on catalytic stability and light olefin yield. Application of nano-zeolite to light olefin production was effective in achieving faster mass transfer of hydrocarbon molecules within the micropore, which led to improvements in olefin yields and catalyst lifetime.     

Nano‐emulsion use for the synthesis of polyaniline nano‐grains or nano‐fibers

We report that nano‐emulsions can be creatively used as a morphology selective synthesis method to prepare not only nano‐grains but also nano‐fibers with high selectivity. Synthesis of the two different morphological materials was demonstrated using polyaniline synthesis as a model case. Polyaniline nano‐grains were synthesized from aniline molecules in nano‐size aqueous droplets as polymerization sites whose droplets were generated by inverse water‐in‐oil nano‐emulsion use, and polyaniline nano‐fibers were synthesized from aniline in aqueous nano‐dimensional channels as polymerization sites whose channels were generated by direct oil‐in‐water nano‐emulsion use containing high population of oil droplets. Using the approaches, we successfully synthesized nano‐fibers of 60 nm diameter with 0.5 µm length and also nano‐grains having diameter of 60–80 nm. The two different polymerization sites of nano‐scale dimension were made by changing the ratio among surfactant, aqueous aniline/HCl solution, and oil, i.e. organic solvent. We found the nano‐fibers synthesized from the channels formed by the direct oil‐in‐water nano‐emulsion have higher bulk electrical conductivity than the nano‐grains which were synthesized from the droplets formed by the inverse water‐in‐oil emulsion. We also found that the emulsion use allows us to use a room temperature synthesis unlike conventional synthesis methods which require to use ice bath temperature. Physical properties of both nano‐fibers and nano‐grains synthesized were characterized by Fourier transform infrared (FTIR), UV–Vis spectra, scanning electron microscopy (SEM), and four probes conductivity measurement. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis,characterization and optical properties of graphene oxide–polystyrene nanocomposites

The synthesis of graphene oxide (GO)–polystyrene (PS) Pickering emulsions, as environment‐friendly nanostructures suitable for novel applications, has received significant attention in recent years. In this work, the synthesis and characterization of GO–PS nanocomposites through seeded emulsion polymerization and the selective light reflection properties of dry films have been reported. Amphiphilic molecule sulfonated 3‐pentadecyl phenol was used as a co‐surfactant to stabilize GO dispersions during the emulsion polymerization process. The particle size of the dispersions as measured by dynamic light scattering decreases from 540 nm, for PS without any GO, to 88 nm with 1 wt% GO content. Scanning electron microscopy studies show a uniform size distribution of the composite particles prepared with GO. The dried films show a structural color that varies with the GO content. The self‐assembly behavior of the dried film was further studied using reflectance spectroscopy, which shows a red shift of the reflectance maximum from 440 to 538 nm as the GO loading was increased from 0.2 to 0.5 wt%, respectively, indicating a different microstructure. X‐ray diffraction, transmission electron microscopy (TEM) and atomic force microscopy (AFM) were used to study the morphology and structure of the composite particles on drying. The AFM study confirms the non‐spherical shape of the particles. Thermogravimetric analysis shows improved thermal decomposition characteristics of the nanocomposite films. Copyright © 2015 John Wiley & Sons, Ltd.     

Solvent‐induced reversible color changes in block copolymer films and new locking method of structural colors

The well‐defined polystyrene‐block‐poly(4‐vinylpyridine) [PS‐block‐P4VP (SV1); lamellar morphology] and polyisoprene‐block‐poly(α‐methyl styrene) [PI‐block‐PMS (IMS1); PI spherical morphology] diblock copolymers were prepared by sequential anionic polymerization techniques. The segregated chains in the P4VP lamellar layers of the SV1 film (PS lamellae: 41 nm; P4VP lamellae: 51 nm) were crosslinked with 1,4‐dibromobutane. This crosslinked film was insoluble in organic solvents such as benzene and chloroform (CHCl₃) and exhibited various structural colors under the swollen state. The IMS1 film (body‐centered cubic lattice, diameter of PI spheres: 53 nm) was soaked in the mixture of CHCl₃/hexane (1 : 10, v/v). This solvent system resulted in the swelling of PI spherical domains. The transmitted and reflected light color through the swollen film changed to a deep blue. Such color changes were reversible upon swelling in solvent and evaporation of the solvent. Subsequently, photofunctional diethyldithiocarbamate (DC) groups were introduced into the PS block of the parent block copolymer IMS1 by means of polymer reactions. The locking of the cubic lattice was performed with living radical graft copolymerization from DC groups of swollen as‐cast film in methyl methacrylate (MMA) under UV irradiation. The locking of structural colors such as blue and green was also achieved, varying the content of poly(methyl methacrylate) (PMMA) grafted chains. Copyright © 2005 John Wiley & Sons, Ltd.     

Amino‐Containing Ultrafine Organosilica‐Nanoparticle‐Modified Au Electrode for the Determination of Cu(II) Ions

Using 3‐Aminopropyltriethoxysilane(APTES) as a single silica source, an amino‐rich ultrafine organosilica‐nanoparticle‐modified Au electrode was fabricated, following the formation of (3‐mercaptopropyl)‐trimethoxysilane (MPTS) monolayer on Au surface (MPTS/Au). With cetyltrimethylammonium bromide as an additive, APTES‐based gel particles on the electrode have a narrow particle size distribution of 4–7 nm and “crystal‐like” structure. AFM and electrochemical characterization confirmed the successful grafting of APTES nanoparticles on MPTS/Au. The APTES/MPTS/Au electrode is highly sensitive for the detection of copper(II) ions with a detection limit as low as 1.6×10^?12 mol L^?1 (S/N>3) by square wave voltammetry. The current is linear to copper(II) concentration between 1.6×10^?12 and 6.25×10^?10 mol L^?1.     

Salt Responsive Morphologies of ssDNA‐Based Triblock Polyelectrolytes in Semi‐Dilute Regime: Effect of Volume Fractions and Polyelectrolyte Length

A comprehensive study is reported on the effect of salt concentration, polyelectrolyte block length, and polymer concentration on the morphology and structural properties of nanoaggregates self‐assembled from BAB single‐strand DNA (ssDNA) triblock polynucleotides in which A represents polyelectrolyte blocks and B represents hydrophobic neutral blocks. A morphological phase diagram above the gelation point is developed as a function of solvent ionic strength and polyelectrolyte block length utilizing an implicit solvent ionic strength method for dissipative particle dynamics simulations. As the solvent ionic strength increases, the self‐assembled DNA network structures shrinks considerably, leading to a morphological transition from a micellar network to worm‐like or hamburger‐shape aggregates. This study provides insight into the network morphology and its changes by calculating the aggregation number, number of hydrophobic cores, and percentage of bridge chains in the network. The simulation results are corroborated through cryogenic transmission electron microscopy on the example of the self‐assembly of ssDNA triblocks.     

Effect of Confinement on Proton‐Transfer Reactions in Water Nanopools

Proton transfer from the photoacid 8‐hydroxy‐1,3,6‐pyrenetrisulfonic acid (HPTS) to water is studied in reverse micelles with ionic (AOT=sodium dioctyl sulfosuccinate) and non‐ionic (BRIJ‐30=polyoxyethylene(4)lauryl ether) surfactants. The dynamics are studied by probing the transient electronic absorption and transient vibrational absorption, both with sub‐picosecond resolution. The reverse micelle sizes range from approximately 1.6 to 5.5 nm in diameter. For both surfactants it is found that the rate of proton transfer decreases with decreasing reverse micelle size, regardless of surfactant. In addition, for AOT reverse micelles, a fraction of the photoacid molecules exhibit non‐radiative decay, preventing proton transfer.     

A Triptycene‐Based Approach to Solubilising Carbon Nanotubes and C60

We describe herein the synthesis of a triptycene‐based surfactant designed with the ability to solubilise single‐walled carbon nanotubes (SWNTs) and C₆₀ in water through non‐covalent interactions. Furthermore, an amphiphilic naphthalene‐based surfactant with the same ability to solubilise SWNTs and C₆₀ has also been prepared. The compounds synthesised were designed with either two ionic or non‐ionic tails to ensure a large number of supramolecular interactions with the solvent, thereby promoting strong solubilisation. The surfactants produced stable suspensions in which the SWNTs are dispersed and the surfactant/SWNT complexes formed are stable for more than one year. UV/Vis/NIR absorption spectroscopy, TEM and AFM were employed to probe the solubilisation properties of the dispersion of surfactants and SWNTs in water.     

Monodisperse ultrafine polystyrene nanoparticles prepared by a semicontinuous microemulsion polymerization

Monodisperse ultrafine polystyrene nanoparticles have been successfully prepared under low levels of surfactant through a novel semicontinuous microemulsion polymerization, in which the first part of monomer (St₁) is added dropwise while the subsequent supply to the polymerizing system is delivered in one potion. Polystyrene nanoparticles with number‐average diameter of 17.4 nm and polydispersity index of 1.06 were obtained using low level of surfactant/monomer weight ratio of 0.20. Influencing of parameters including amount of St₁, solid content, initiator, reaction temperature, and cosurfactant on the resultant particle size and size distribution were investigated. The mechanism of nucleation and particle growth was discussed as well. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4522–4528, 2008     

Derivatization of fatty alcohol ethoxylate non‐ionic surfactants using 2‐sulfobenzoic anhydride for characterization by liquid chromatography/mass spectrometry

A derivatization procedure has been developed for the improved characterization of fatty alcohol ethoxylate non‐ionic surfactants by liquid chromatography/mass spectrometry. The end hydroxyl group of each surfactant species was converted into an oxycarbonylbenzene‐2‐sulfonic acid group with 2‐sulfobenzoic anhydride under mild conditions. The produced sulfonic acid group allows all species, including fatty alcohols and those with less than three ethoxylates, to be uniformly ionized by electrospray ionization (ESI) mass spectrometry. Both acid and base can be used as a mobile phase additive for liquid chromatography without affecting M_n and average ethoxylate values, although ion intensities are suppressed during the ESI process. The method was used to analyze seven commercial fatty alcohol ethoxylate non‐ionic surfactants, and the determined M_n and EO values were comparable with the results obtained by NMR. The relative ratio of different fatty alcohol based ethoxylates in a sample can also be determined using the summed mass spectral data. Copyright © 2009 The Dow Chemical Company