Rhodium‐Catalyzed Highly Diastereo‐ and Enantioselective Synthesis of a Configurationally Stable S‐Shaped Double Helicene‐Like Molecule

An S‐shaped double helicene‐like molecule (>99 % ee), possessing stable helical chirality, has been synthesized by the rhodium(I)/difluorphos complex‐catalyzed highly diastereo‐ and enantioselective intramolecular double [2+2+2] cycloaddition of a 2‐naphthol‐ and benzene‐linked hexayne. The collision between two terminal naphthalene rings destabilizes the helical chirality of the S‐shaped double helicene‐like molecule, but the introduction of two additional fused benzene rings significantly increases the configurational stability. Thus, no epimerization and racemization were observed even at 100 °C. The enantiopure S‐shaped double helicene‐like molecule forms a trimer through the multiple C?H???π and C?H???O interactions in the solid‐state. The trimers stack to form columnar packing structures, in which neighboring stacks have opposite dipole directions. The accumulation of helical structures in the same direction in the S‐shaped double helicene‐like molecule enhanced the chiroptical properties.     

Steric and Electronic Effects on the Configurational Stability of Residual Chiral Phosphorus‐Centered Three‐Bladed Propellers: Tris‐aryl Phosphane Oxides

A series of tris‐aryl phosphane oxides existing as residual enantiomers or diastereoisomers with substituents on the aryl rings differing in size and electronic properties were synthesized and characterized. Their electronic properties were evaluated on the basis of their electrochemical oxidation and reduction potentials together with those of the corresponding “blade bromides” (i.e., the naphthalene derivatives displaying the same substitution pattern of the tris‐naphthyl phosphane oxide blades, with a bromo substituent where the phosphorus atom is located) determined by CV. The residual stereoisomeric phosphane oxides were isolated in a stereochemically pure state and were found to be highly configurationally stable at room temperature (stereoisomerization barriers of about 27 kcal mol^?1). The chiroptical properties of the residual stereoisomers and the assignments of absolute configuration are discussed. The configurational stability of residual tris‐aryl phosphane oxides was found to be scarcely influenced by the electronic properties of the substituents present on the aromatic rings constituting the blades, while steric effects play the most relevant role. Detailed theoretical calculations are in agreement with the experimental results and also contribute to a rational interpretation of the stereodynamics of these systems.     

Multi‐zinc‐expanded graphene patches: Tetraradical versus diradical character

Three classes of multi‐Zn‐expanded graphene patches in different shapes are computationally designed through introducing a Zn chain into the corresponding middle benzenoid chain. Both density functional theory and complete active space self‐consistent field calculations predict that molecules of nnn‐quasi‐linear and nnn‐slightly bent series have the open‐shell broken‐symmetry (BS) singlet diradical ground states, whereas those of n(n+1)n species possess quintet tetraradical as their ground state and become open‐shell BS singlet tetraradicals when they are in a higher energy state. These results offer the first theoretical attempt to introduce multi‐Zn into the small graphene patches to form Zn‐expanded graphene patches, leading them to polyradical structures. This work provides an executable strategy to yield molecules which have stable polyradicaloid character and enhanced electronic properties of multi‐Zn‐expanded graphene patches. © 2012 Wiley Periodicals, Inc.     

Modulating the Ground‐ and Excited‐State Oxidation Potentials of Diaminonaphthalene by Sequential N‐Methylation

A series of 1,5‐diaminonaphthalene derivatives were synthesized and characterized to provide ground‐ and excited‐state electron donors of similar structure but varying potential. Electrochemical and spectroscopic properties of the series are reported and together illustrate two opposing consequences of alkyl substitution on the aryl amines. Inductive effects of methylation are evident from the decrease in ground‐state oxidation potential for derivatives containing monomethylamino substituents. In contrast, steric effects seem to dominate the increase in the ground‐state oxidation potential of derivatives containing dimethylamino substituents since the conformational constraints created by dimethylation suppress delocalization of the nonbonding electrons. Absorption and emission properties also respond to increasing levels of N‐methylation, and the excited‐state oxidation potentials of the parent 1,5‐diaminonaphthalene and its monomethylamine derivatives (ca. ?3.2 V) are approximately 200 mV lower than the corresponding dimethylamino derivatives (?3.0 V).     

1‐Phenyl‐5‐(piperidino­methyl)‐1H‐tetrazole

In the mol­ecule of the title 1,5‐disubstituted tetrazole, C₁₃H₁₇N₅, the tetrazole and benzene rings are not coplanar, having a dihedral angle of 42.96 (5)° between them. The piperidine fragment adopts a chair conformation, and there is a non‐classical intramolecular contact between the benzene H atom and the piperidine N atom. Intermolecular C—H⋯π interactions involving the piperidine C—H groups and the benzene rings are responsible for the formation of two‐dimensional networks, extending parallel to the ab plane. These networks are linked together into a three‐dimensional polymeric structure viaπ–π stacking interactions between the tetrazole rings of two adjacent mol­ecules.     

Quinoidal Oligo(9,10‐anthryl)s with Chain‐Length‐Dependent Ground States: A Balance between Aromatic Stabilization and Steric Strain Release

Quinoidal π‐conjugated polycyclic hydrocarbons have attracted intensive research interest due to their unique optical/electronic properties and possible magnetic activity, which arises from a thermally excited triplet state. However, there is still lack of fundamental understanding on the factors that determine the electronic ground states. Herein, by using quinoidal oligo(9,10‐anthryl)s, it is demonstrated that both aromatic stabilisation and steric strain release play balanced roles in determining the ground states. Oligomers with up to four anthryl units were synthesised and their ground states were investigated by electronic absorption and electron spin resonance (ESR) spectroscopy, assisted by density functional theory (DFT) calculations. The quinoidal 9,10‐anthryl dimer 1 has a closed‐shell ground state, whereas the tri‐ ( 2 ) and tetramers ( 3 ) both have an open‐shell diradical ground state with a small singlet–triplet gap. Such a difference results from competition between two driving forces: the large steric repulsion between the anthryl/phenyl units in the closed‐shell quinoidal form that drives the molecule to a flexible open‐shell diradical structure, and aromatic stabilisation due to the gain of more aromatic sextet rings in the closed‐shell form, which drives the molecule towards a contorted quinoidal structure. The ground states of these oligomers thus depend on the overall balance between these two driving forces and show chain‐length dependence.     

Tuning Excited‐State Reactivity by Proton‐Coupled Electron Transfer

The reactivity, and even reaction pathway, of excited states can be tuned by proton‐coupled electron transfer (PCET). The triplet state of benzophenone functionalized with a Brønsted acid (³*BP‐COOH) showed a more powerful oxidation capability over the simple triplet state of benzophenone (³*BP). ³*BP‐COOH could remove an electron from benzene at the rate of 8.0×10⁵ m ^?1 s^?1, in contrast to the reactivity of ³*BP which was inactive towards benzene oxidation. The origin of this great enhancement on the ability of the excited states to remove electrons from substrates is attributed to the intramolecular Brønsted acid, which enables the reductive quenching of ³*BP by concerted electron–proton transfer.     

Nanoarchitectured Graphene‐Based Supercapacitors for Next‐Generation Energy‐Storage Applications

Tremendous development in the field of portable electronics and hybrid electric vehicles has led to urgent and increasing demand in the field of high‐energy storage devices. In recent years, many research efforts have been made for the development of more efficient energy‐storage devices such as supercapacitors, batteries, and fuel cells. In particular, supercapacitors have great potential to meet the demands of both high energy density and power density in many advanced technologies. For the last half decade, graphene has attracted intense research interest for electrical double‐layer capacitor (EDLC) applications. The unique electronic, thermal, mechanical, and chemical characteristics of graphene, along with the intrinsic benefits of a carbon material, make it a promising candidate for supercapacitor applications. This Review focuses on recent research developments in graphene‐based supercapacitors, including doped graphene, activated graphene, graphene/metal oxide composites, graphene/polymer composites, and graphene‐based asymmetric supercapacitors. The challenges and prospects of graphene‐based supercapacitors are also discussed.     

An Unexpected Double Diels–Alder Reaction of (E)‐2‐Bromo‐4‐aryl‐1,3‐pentadiene Involving [1,5]‐Hydrogen Migration and HBr Elimination: Synthesis of Bicyclo[2.2.2]octene Derivatives

An unexpected double Diels–Alder (DDA) reaction of (E)‐2‐bromo‐4‐aryl‐1,3‐pentadiene was developed and resulted in a series of “butterfly‐like” bicyclo[2.2.2]octene derivatives in moderate to good yields without the need for a metal catalyst. The proposed mechanism involves a [1,5]‐sigmatropic hydrogen migration and HBr elimination. Through this decisive [1,5]‐hydrogen shift step, the electronic properties and steric hindrance of the conjugated diene substrate are completely altered and the DDA reaction of this potential diene synthon is successfully achieved.     

Electron‐Poor Thiophene 1,1‐Dioxides: Synthesis,Characterization, and Application as Electron Relays in Photocatalytic Hydrogen Generation

The synthesis and characterization of electron‐poor thiophene 1,1‐dioxides bearing cyanated phenyl groups are reported. The electron‐accepting nature of these compounds was evaluated by cyclic voltammetry, and highly reversible and facile reductions were observed for several derivatives. Moreover, some of the reduced thiophene dioxides form colorful anions, which were investigated spectroelectrochemically. Photoluminescence spectra of the electron‐deficient sulfones were measured in CH₂Cl₂, and they emit in the blue‐green region with significant variation in the quantum yield depending on the aryl substituents. By expanding the degree of substitution on the phenyl rings, quantum yields up to 34 % were obtained. X‐ray diffraction data are reported for two of the thiophene 1,1‐dioxides, and the electronic structure was probed for all synthesized derivatives through DFT calculations. The dioxides were also examined as electron relays in a photocatalytic water reduction reaction, and they showed potential to boost the efficiency.     

Azido and Tetrazolo 1,2,4,5‐Tetrazine N‐Oxides

This study presents the synthesis and characterization of the oxidation products of 3,6‐diazido‐1,2,4,5‐tetrazine ( 1 ) and 6‐amino‐[1,5‐b ]tetrazolo‐1,2,4,5‐tetrazine ( 2 ). 3,6‐Diazido‐1,2,4,5‐tetrazine‐1,4‐dioxide was produced from oxidation with peroxytrifluoroacetic acid, and more effectively using hypofluorous acid, and 2 can be oxidized to two different products, 6‐amino‐[1,5‐b]tetrazolo‐1,2,4,5‐tetrazine mono‐N‐oxide and di‐N‐oxide. These N‐oxide compounds display promising performance properties as energetic materials.     

Selective ethylene oligomerization with in‐situ‐generated chromium catalysts supported by trifluoromethyl‐containing ligands

A series of pyrrole‐containing diarylphosphine and diarylphosphine oxide ligands were prepared. The catalytic activity of the corresponding in‐situ‐generated chromium catalysts was investigated during selective ethylene oligomerization reactions. Variations in the ligand system were introduced by modifying the diarylphosphine and pyrrole moieties that affect the steric and electronic properties. Minor changes in the ligand structure and the composition of activators significantly changed the catalytic activity, selectivity toward linear alpha‐olefins (LAO) versus polyethylene (PE), and the distribution of oligomeric products. The presence of trifluoromethyl groups on the diphenyl rings in ligand 3 promoted oxidation to form the corresponding phosphine oxide structure, 3o , which dramatically enhanced the catalytic activity of ethylene trimerization. The in‐situ‐generated chromium complex based on 3o activated by DMAO (dry methylaluminoxane)/TIBA (triisobutylaluminum) was used to achieve activity of about 1250 g (mmol of Cr)⁻¹ h⁻¹ with 98.5 mol % 1‐hexene, along with a negligible amount of PE side product. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 444–450     

Synthesis,Characterization, and Reactivity of Novel 6H‐1,3,5‐Oxathiazine S,S‐Dioxides

A series of novel 6H‐1,3,5‐oxathiazine S,S‐dioxides were synthesized by the m‐CPBA oxidation (2.2 equiv) of 6H‐1,3,5‐oxathizines. The synthetic utilities of the newly synthesized cyclic sulfones were investigated. In a thermal condition, compounds 6H‐1,3,5‐oxathiazine S,S‐dioxides were found relatively stable, but Lewis acid‐induced thermal reaction afforded the corresponding amides. The plausible pathway to amides from 6H‐1,3,5‐oxathiazine S,S‐dioxides was also discussed in this account.     

Prediction of excited‐state properties of oligoacene crystals using polarizable continuum model‐tuned range‐separated hybrid functional approach

A methodology combining the polarizable continuum model and optimally‐tuned range‐separated (RS) hybrid functional was proposed for the quantitative characterization of the excited‐state properties in oligoacene (from anthracene to hexacene) crystals. We show that it provides lowest vertical singlet and triplet excitation energies, singlet‐triplet gap, and exciton binding energies in very good agreement with the available experimental data. We further find that it significantly outperforms its non‐tuned RS counterpart and the widely used B3LYP functional, and even many‐body perturbation theory within the GW approximation (based on a PBE starting point). Hence, this approach provides an easily applicable and computationally efficient tool to study the excited‐state properties of organic solids of complexity. © 2017 Wiley Periodicals, Inc.     

Theoretical study on singlet oxygen adsorption onto surface of graphene-like aromatic hydrocarbon molecules

Recently, graphene sheet is one of interesting systems to realize novel electronic properties. Especially, interaction between graphene and adsorbed oxygen molecule is very important to control electronic condition. In this paper, we employed some aromatic hydrocarbons as simple systems of graphene sheet and ab initio MO calculations were carried out to investigate inter-molecular interaction. It is found that not triplet but singlet O₂ molecule have potential of chemisorption onto graphene surface. From the calculated potential energy surface (PES) for distance between benzene and O₂ molecules, meta-stable structure is found at about 1.5 Å with potential barrier. In the optimized structure of its meta-stable state, structural strain can be relaxed through bending of planer benzene ring. Its energy is estimated at 70.10 kcal/mol for benzene. We also estimated the strain effects for naphthalene and pyrene molecules as larger case of graphene and they were 80.85 and 72.45 kcal/mol, respectively.     

The Triplet State of 6‐thio‐2′‐deoxyguanosine: Intrinsic Properties and Reactivity Toward Molecular Oxygen

Thiopurine prodrugs are currently among the leading treatment options for leukemia, immunosuppression, and arthritis. Patients undergoing long‐term thiopurine treatment are at a higher risk of developing sunlight‐induced skin cancers than the general population. This side effect originates from the cellular metabolization of thiopurine prodrugs to form 6‐thio‐2′‐deoxyguanosine, which can absorb UVA radiation, populating its reactive triplet state and leading to oxidatively generated damage. However, the photo‐oxidation mechanism is not fully understood. In this contribution, the oxidation potential and the adiabatic triplet energy of 6‐thio‐2′‐deoxyguanosine are estimated computationally, whereas the intrinsic rate of triple‐state decay and the rate constant for triplet quenching by molecular oxygen are determined using time‐resolved spectroscopic techniques. A singlet oxygen quantum yield of 0.24 ± 0.02 is measured in aqueous solution (0.29 ± 0.02 in acetonitrile). Its magnitude correlates with the relatively low percentage of triplet‐O₂ collision events that generate singlet oxygen (S_Δ = 37%). This behavior is rationalized as being due to the exergonic driving force for electron transfer between the triplet state of 6‐thio‐2′‐deoxyguanosine and molecular oxygen (ΔG_ET = ?69.7 kJ mol^?1), resulting in the formation of a charge‐transfer complex that favors nonradiative decay to the ground state over triplet energy transfer.     

Synthesis and Properties of Fused‐Ring‐Expanded Porphyrins that were Core‐Modified with Group 16 Heteroatoms

The synthesis of a series of novel core‐modified and fused‐ring‐expanded tetraphenylporphyrins is reported. Theoretical calculations and magnetic circular dichroism (MCD) and fluorescence spectroscopic measurements were used to analyze the effect of core modification with Group 16 oxygen, sulfur, selenium, and tellurium atoms on the optical properties and electronic structures of the porphyrins. Marked redshifts of the Q and B bands and accelerated intersystem‐crossing rates were observed, thus making these compounds potentially suitable for use in a variety of applications. The scope for further fine‐tuning of these optical properties based on additional structural modifications, such as the incorporation of fused benzene rings to form ABAB structures by using a thiophene precursor with a fused bicyclo[2.2.2]octadiene ring and the introduction of various substituents onto the meso‐phenyl rings, is also examined.     

Dodecatwistarene Imides with Zigzag‐Twisted Conformation for Organic Electronics

1D nonplanar graphene nanoribbons generally have three possible conformers: helical, zigzag, and mixed conformations. Now, a kind of 1D nonplanar graphene nanoribbon, namely dodecatwistarene imides featuring twelve linearly fused benzene rings, was obtained by bottom‐up synthesis of palladium‐catalyzed Stille coupling and C?H activation. Single‐crystal X‐ray diffraction analyses revealed that it displays a zigzag‐twisted conformation caused by steric hindrance between imide groups and neighboring annulated benzene rings with the pendulum angle of 53°. This conformation is very stable and could not convert into other conformations even when heated up to 250 °C for 6 h. Despite of the highly twisted topology, organic field‐effect transistor based on it exhibits electron mobility up to 1.5 cm² V^?1 s^?1 after annealing.     

Graphene‐Coated ZnO and SiO2 as Supports for CoO Nanoparticles with Enhanced Reducibility

The insertion of a graphene layer between cobalt and a substrate modifies the morphology and the oxidation/reduction properties of supported cobalt particles. Co forms a relatively flat structure on ZnO and SiO₂, whereas individual Co nanoparticles are formed after graphene coating of these substrates. The graphene layer moderates the formation of cobalt oxide in 5×10^?7 mbar O₂ and promotes the reduction of oxidized Co in H₂ at lower temperature. Angle‐resolved XPS measurements indicate that this is mainly a consequence of the restricted interaction of cobalt with the oxide supports. After the low‐pressure redox treatments, the graphene layer maintains a relatively high quality with a small number of defect sites.     

(5Z)‐4‐Amino‐2‐(4‐hydroxyphenyl)‐1H‐imidazol‐5(2H)‐one oxime 3‐oxide

The title molecule, C₉H₁₀N₄O₃, consists of benzene and imidazole rings which are almost perpendicular to each other. A hydroxyimino group is directly linked to the imidazole ring with a double C=N bond, which is the first example in this type of compound. The double bond may be a good location for the initiation of various reactions with a wide range of potential applications. In the crystal structure, there are π–π interactions between molecules related by a centre of symmetry, with the imidazole and benzene rings almost completely overlapped. The molecules are hydrogen bonded in each direction and form a three‐dimensional hydrogen‐bond network.