Control of Surface Plasmon Resonance of Au/SnO2 by Modification with Ag and Cu for Photoinduced Reactions under Visible‐Light Irradiation over a Wide Range

Gold particles supported on tin(IV) oxide (0.2 wt % Au/SnO₂) were modified with copper and silver by the multistep photodeposition method. Absorption around λ=550 nm, attributed to surface plasmon resonance (SPR) of Au, gradually shifted to longer wavelengths on modification with Cu and finally reached λ=620 nm at 0.8 wt % Cu. On the other hand, the absorption shifted to shorter wavelength with increasing amount of Ag and reached λ=450 nm at 0.8 wt % Ag. These Cu‐ and Ag‐modified 0.2 wt % Au/SnO₂ materials (Cu‐Au/SnO₂ and Ag‐Au/SnO₂) and 1.0 wt % Au/SnO₂ were used for mineralization of formic acid to carbon dioxide in aqueous suspension under irradiation with visible light from a xenon lamp and three kinds of light‐emitting diodes with different wavelengths. The reaction rates for the mineralization of formic acid over these materials depend on the wavelength of light. Apparent quantum efficiencies of Cu‐Au/SnO₂, Au/SnO₂, and Ag‐Au/SnO₂ reached 5.5 % at 625 nm, 5.8 % at 525 nm, and 5.1 % at 450 nm, respectively. These photocatalysts can also be used for selective oxidation of alcohols to corresponding carbonyl compounds in aqueous solution under visible‐light irradiation. Broad responses to visible light in formic acid mineralization and selective alcohol oxidation were achieved when the three materials were used simultaneously.     

Enhanced Magneto‐optical Properties of Semiconductor EuS Nanocrystals Assisted by Surface Plasmon Resonance of Gold Nanoparticles

Remarkable magneto‐optical properties of a new isolator material, that is, europium sulfide nanocrystals with gold (EuS–Au nanosystem), has been demonstrated for a future photo‐information technology. Attachment of gold particles that exhibit surface plasmon resonance leads to amplification of the magneto‐optical properties of the EuS nanocrystals. To construct the EuS–Au nanosystems, cubic EuS and spherical Au nanocrystals have been joined by a variety of organic linkers, that is, 1,2‐ethanedithiol (EDT), 1,6‐hexanedithiol (HDT), 1,10‐decanedithiol (DDT), 1,4‐bisethanethionaphthalene (NpEDT), or 1,4‐bisdecanethionaphthalene (NpDDT) . Formation of these systems was observed by XRD, TEM, and absorption spectra measurements. The magneto‐optical properties of the EuS–Au nanosystem have been characterized by using Faraday rotation spectroscopy. The Faraday rotation angle of the EuS–Au nanosystem is dependent on the Au particle size and interparticle distance between EuS and Au nanocrystals. Enhancement of the Faraday rotation of EuS–Au nanosystems was observed. The spin configuration in the excited state of the EuS–Au nanosystem was also investigated using photo‐assisted electron paramagnetic resonance.     

Iron(III)‐Quantity‐Dependent Aggregation–Dispersion Conversion of Functionalized Gold Nanoparticles

Developing gold nanoparticles (AuNPs) with well‐designed functionality is highly desirable for boosting the performance and versatility of inorganic–organic hybrid materials. In an attempt to achieve ion recognition with specific signal expressions, we present here 4‐piperazinyl‐1,8‐naphthalimide‐functionalized AuNPs for the realization of quantitative recognition of Fe^III ions with dual (colorimetric and fluorescent) output. The research takes advantage of 1) quantity‐controlled chelation‐mode transformation of the piperazinyl moiety on the AuNPs towards Fe^III, thereby resulting in an aggregation–dispersion conversion of the AuNPs in solution, and 2) photoinduced electron transfer of a naphthaimide fluorophore on the AuNPs, thus leading to reversible absorption and emission changes. The functional AuNPs are also responsive to pH variations. This strategy for realizing the aggregation–dispersion conversion of AuNPs with returnable signal output might exhibit application potential for advanced nanoscale chemosensors.     

Visible‐Light‐Induced Electron Transport from Small to Large Nanoparticles in Bimodal Gold Nanoparticle‐Loaded Titanium(IV) Oxide

A key to realizing the sustainable society is to develop highly active photocatalysts for selective organic synthesis effectively using sunlight as the energy source. Recently, metal‐oxide‐supported gold nanoparticles (NPs) have emerged as a new type of visible‐light photocatalysts driven by the excitation of localized surface plasmon resonance of Au NPs. Here we show that visible‐light irradiation (λ>430 nm) of TiO₂‐supported Au NPs with a bimodal size distribution (BM‐Au/TiO₂) gives rise to the long‐range (>40 nm) electron transport from about 14 small (ca. 2 nm) Au NPs to one large (ca. 9 nm) Au NP through the conduction band of TiO₂. As a result of the enhancement of charge separation, BM‐Au/TiO₂ exhibits a high level of visible‐light activity for the one‐step synthesis of azobenzenes from nitrobenzenes at 25 °C with a yield greater than 95 % and a selectivity greater than 99 %, whereas unimodal Au/TiO₂ (UM‐Au/TiO₂) is photocatalytically inactive.     

DNA‐Encoded Tuning of Geometric and Plasmonic Properties of Nanoparticles Growing from Gold Nanorod Seeds

Systematically controlling the morphology of nanoparticles, especially those growing from gold nanorod (AuNR) seeds, are underexplored; however, the AuNR and its related morphologies have shown promises in many applications. Herein we report the use of programmable DNA sequences to control AuNR overgrowth, resulting in gold nanoparticles varying from nanodumbbell to nanooctahedron, as well as shapes in between, with high yield and reproducibility. Kinetic studies revealed two representative pathways for the shape control evolving into distinct nanostructures. Furthermore, the geometric and plasmonic properties of the gold nanoparticles could be precisely controlled by adjusting the base compositions of DNA sequences or by introducing phosphorothioate modifications in the DNA. As a result, the surface plasmon resonance (SPR) peaks of the nanoparticles can be fine‐tuned in a wide range, from visible to second near‐infrared (NIR‐II) region beyond 1000 nm.     

Rapid Cationization of Gold Nanoparticles by Two‐Step Phase Transfer

Cationic gold nanoparticles offer intriguing opportunities as drug carriers and building blocks for self‐assembled systems. Despite major progress on gold nanoparticle research in general, the synthesis of cationic gold particles larger than 5 nm remains a major challenge, although these species would give a significantly larger plasmonic response compared to smaller cationic gold nanoparticles. Herein we present the first reported synthesis of cationic gold nanoparticles with tunable sizes between 8–20 nm, prepared by a rapid two‐step phase‐transfer protocol starting from simple citrate‐capped particles. These cationic particles form ordered self‐assembled structures with negatively charged biological components through electrostatic interactions.     

Plasmon‐Resonance‐Based Generation of Cathodic Photocurrent at Electrodeposited Gold Nanoparticles Coated with TiO2 Films

Reversed photoresponse: Indium tin oxide (ITO)/Au nanoparticle (NP)/TiO₂ electrodes (see picture) exhibit cathodic photocurrents and positive photopotentials under visible light, whereas ITO/TiO₂/Au NP electrodes show an inverted response. This behavior indicates that electron transfer occurs from the plasmon‐excited Au NPs to the TiO₂ film. An enhanced O₂ photoreduction activity is found for ITO/Au NP/TiO₂/Pt electrodes.

     

紫外光照射制备具有光学活性的银纳米粒子

以脱氧胆酸钠（NaDC）为还原剂、稳定剂,经紫外光辐照AgNO₃溶液在室温下制备出尺寸30nm左右的类球形的银纳米粒子。用紫外-可见光谱、透射电镜、圆二色谱和傅立叶变换红外光谱等测试手段对所制备的脱氧胆酸钠包裹的银纳米粒子进行了表征。红外光谱结果表明,在紫外光激发下,脱氧胆酸钠甾环上12α-OH发生氧化反应,同时还原Ag⁺为单质银,并聚集生成银纳米粒子。溶液的pH值对光化学氧化还原反应速度有着重要的影响,增加溶液的pH值,Ag⁺的还原反应速度明显加快。在吸附在银粒子表面的脱氧胆酸钠的手性氛围诱导下,生成的银纳米粒子在其表面等离子体共振区域出现手性信号。     

紫外光照射制备具有光学活性的银纳米粒子

以脱氧胆酸钠(NaDC)为还原剂、稳定剂,经紫外光辐照AgNO3溶液在室温下制备出尺寸30 nm左右的类球形的银纳米粒子。用紫外-可见光谱、透射电镜、圆二色谱和傅立叶变换红外光谱等测试手段对所制备的脱氧胆酸钠包裹的银纳米粒子进行了表征。红外光谱结果表明,在紫外光激发下,脱氧胆酸钠甾环上12α-OH发生氧化反应,同时还原Ag+为单质银,并聚集生成银纳米粒子。溶液的pH值对光化学氧化还原反应速度有着重要的影响,增加溶液的pH值,Ag+的还原反应速度明显加快。在吸附在银粒子表面的脱氧胆酸钠的手性氛围诱导下,生成的银纳米粒子在其表面等离子体共振区域出现手性信号。     

Ag/AgCl@Cotton‐fabric:A Highly Stable and Easy‐recycling Plasmonic Photocatalyst under Visible Light Irradiation

Ag/AgCl@cotton‐fabric plasmonic photocatalyst has been synthesized by a facile method, which exhibits excellent stability for the decomposition of RhB and conveniency in the separation and recovery of the catalyst from the solution.     

Constructing Ordered Three‐Dimensional TiO2 Channels for Enhanced Visible‐Light Photocatalytic Performance in CO2 Conversion Induced by Au Nanoparticles

As a typical photocatalyst for CO₂ reduction, practical applications of TiO₂ still suffer from low photocatalytic efficiency and limited visible‐light absorption. Herein, a novel Au‐nanoparticle (NP)‐decorated ordered mesoporous TiO₂ (OMT) composite (OMT‐Au) was successfully fabricated, in which Au NPs were uniformly dispersed on the OMT. Due to the surface plasmon resonance (SPR) effect derived from the excited Au NPs, the TiO₂ shows high photocatalytic performance for CO₂ reduction under visible light. The ordered mesoporous TiO₂ exhibits superior material and structure, with a high surface area that offers more catalytically active sites. More importantly, the three‐dimensional transport channels ensure the smooth flow of gas molecules, highly efficient CO₂ adsorption, and the fast and steady transmission of hot electrons excited from the Au NPs, which lead to a further improvement in the photocatalytic performance. These results highlight the possibility of improving the photocatalysis for CO₂ reduction under visible light by constructing OMT‐based Au‐SPR‐induced photocatalysts.     

Gold Nanoparticles as a Biosensor for Cancer Biomarker Determination

Molecular biology applications based on gold nanotechnology have revolutionary impacts, especially in diagnosing and treating molecular and cellular levels. The combination of plasmonic resonance, biochemistry, and optoelectronic engineering has increased the detection of molecules and the possibility of atoms. These advantages have brought medical research to the cellular level for application potential. Many research groups are working towards this. The superior analytical properties of gold nanoparticles can not only be used as an effective drug screening instrument for gene sequencing in new drug development but also as an essential tool for detecting physiological functions, such as blood glucose, antigen-antibody analysis, etc. The review introduces the principles of biomedical sensing systems, the principles of nanomaterial analysis applied to biomedicine at home and abroad, and the chemical surface modification of various gold nanoparticles.     

Polysiloxanes Modified by Thiol‐Ene Reaction and Their Interaction with Gold Nanoparticles

A poly(vinylmethyl‐co‐dimethyl)siloxane has been functionalized with phenylethanethiol, N‐methylmercaptoacetamide and heptadecafluoro‐1‐decanethiol by a thermal radical thiol‐ene reaction initiated by azobisisobutyronitrile. The resulting polymers were obtained in good yields with most of the time a complete conversion of the vinyl groups. The reaction also preserved the fragile polysiloxane backbone. The polymer, grafted with about 25 % of mercapto‐acetamide groups is soluble in polar solvents such as dimethylformamide and dimethyl sulfoxide, opening the way for further functionalization with polar molecules such as unprotected carbohydrates. Spherical and branched gold nanoparticles were coated with these polymers. This coating induced a surface resonance plasmon shift resulting from the interaction of the grafted polysiloxanes with the nanoparticle surface. The shift can be explained by the variation of the refractive index of the side groups but may be also related to the self‐organization of polysiloxanes and their interactions with the gold surface depending on their polarity.     

Room‐Temperature and Aqueous‐Phase Synthesis of Plasmonic Molybdenum Oxide Nanoparticles for Visible‐Light‐Enhanced Hydrogen Generation

A straightforward aqueous synthesis of MoO_3?x nanoparticles at room temperature was developed by using (NH₄)₆Mo₇O₂₄?4 H₂O and MoCl₅ as precursors in the absence of reductants, inert gas, and organic solvents. SEM and TEM images indicate the as‐prepared products are nanoparticles with diameters of 90–180 nm. The diffuse reflectance UV‐visible‐near‐IR spectra of the samples indicate localized surface plasmon resonance (LSPR) properties generated by the introduction of oxygen vacancies. Owing to its strong plasmonic absorption in the visible‐light and near‐infrared region, such nanostructures exhibit an enhancement of activity toward visible‐light catalytic hydrogen generation. MoO_3?x nanoparticles synthesized with a molar ratio of Mo^VI/Mo^V 1:1 show the highest yield of H₂ evolution. The cycling catalytic performance has been investigated to indicate the structural and chemical stability of the as‐prepared plasmonic MoO_3?x nanoparticles, which reveals its potential application in visible‐light catalytic hydrogen production.     

Reversible Clustering of Gold Nanoparticles under Confinement

A limiting factor of solvent‐induced nanoparticle self‐assembly is the need for constant sample dilution in assembly/disassembly cycles. Changes in the nanoparticle concentration alter the kinetics of the subsequent assembly process, limiting optical signal recovery. Herein, we show that upon confining hydrophobic nanoparticles in permeable silica nanocapsules, the number of nanoparticles participating in cyclic aggregation remains constant despite bulk changes in solution, leading to highly reproducible plasmon band shifts at different solvent compositions.     

Silver Nanoparticles Supported on CeO2‐SBA‐15 by Microwave Irradiation Possess Metal–Support Interactions and Enhanced Catalytic Activity

Metal–support interactions (MSIs) and particle size play important roles in catalytic reactions. For the first time, silver nanoparticles supported on CeO₂‐SBA‐15 supports are reported that possess tunable particle size and MSIs, as prepared by microwave (MW) irradiation, owing to strong charge polarization of CeO₂ clusters (i.e., MW absorption). Characterizations, including TEM, X‐ray photoelectron spectroscopy, and extended X‐ray absorption fine structure, were carried out to disclose the influence of CeO₂ contents on the Ag particle size, MSI effect between Ag nanoparticles and CeO₂‐SBA‐15 supports, and the strong MW absorption of CeO₂ clusters that contribute to the MSIs during Ag deposition. The Ag particle sizes were controllably tuned from 1.9 to 3.9 nm by changing the loading amounts of CeO₂ from 0.5 to 2.0 wt %. The Ag nanoparticle size was predominantly responsible for the high turnover frequency (TOF) of 0.41 min^?1 in ammonia borane dehydrogenation, whereas both particle size and MSIs contributed to the high TOF of 555 min^?1 in 4‐nitrophenol reduction for Ag/0.5CeO₂‐SBA‐15, which were twice as large as those of Ag/SBA‐15 without CeO₂ and Ag/CeO₂‐SBA‐15 prepared by conventional oil‐bath heating.     

Oxidation Ability of Plasmon‐Induced Charge Separation Evaluated on the Basis of Surface Hydroxylation of Gold Nanoparticles

The oxidation ability of plasmonic photocatalysts, which has its origins in plasmon‐induced charge separation and has not yet been studied quantitatively and systematically, is important for designing practical photocatalytic systems. Oxidation ability was investigated on the basis of surface hydroxylation of Au nanoparticles on TiO₂ at various irradiation wavelengths and electrolyte pH values. The reaction proceeds only when the sum of the flat band potential of TiO₂ and the irradiated photon energy is close to, or more positive than, the theoretical potential for the reaction.