The Electrochemical Behavior of p‐Sulfonated Sodium Salt of Calix[6]arene

The water‐soluble p‐sulfonated sodium salt of calix[6]arene (p‐SC6) is synthesized and characterized by FT‐IR and UV‐vis spectra. The purity of the product is checked as 97.6% by HPLC. The electrochemical behavior of p‐SC6 in NaAc+HAc (pH 3.9) buffer solution is studied. The results showed that p‐SC6 can be oxidized irreversibly when the potential scanned from 0 to 1.0 V (vs. SCE). The peak potential locates at about 0.83 V (vs. SCE) which depends on the scan rate and acidity. The number of electrons, n, transferred in the electrochemical reaction is 1. The diffusion coefficient of p‐SC6 is 1.4×10^?6 cm² s^?1 at 25 °C. The electrochemical oxidation of p‐SC6 is strongly affected by acidity. For example, when pH is 10.6, n becomes 3. But the diffusion coefficient of p‐SC6 is 1.1×10^?6 cm² s^?1 which is close to that measured at pH 3.9.     

Electrochemical Performance of Transition Metal‐Coordinated Polypyrrole: A Mini Review

The conductive polymer of polypyrrole can be acted as electroactive electrode material of supercapacitor due to reversible redox behavior and high capacitance. It usually suffers from low electrochemical stability due to the breakdown of polymer molecule chain in the long‐term charge and discharge process. The monometallic or bimetallic‐coordinated polypyrrole usually exhibits the improved electrochemical performance. The transition metal ions such as ruthenium, iron, copper and cobalt are adopted for the coordination modification. The transition metal‐coordinated polypyrrole includes the intrachain and interchain coordination structure between transition metal ion and nitrogen atom of pyrrole ring. It is able to reinforce the polymer molecule chain strength to overcome excessive volumetric swelling and shrinking during charge‐discharge process, improving the cycling stability and rate capability of polypyrrole. Accordingly, the transition metal‐coordinated polypyrrole keeps simultaneously high capacitance performance and electrochemical stability, acting as the promising conductive polymer‐based supercapacitor electrode material for effective energy storage.     

不同状态下聚吡咯膜的电化学阻抗

用恒电流法分别聚合了掺杂对甲苯磺酸根(pTS-)和十二烷基磺酸根(DS-)的聚吡咯膜(PPy/pTS和PPy/DS),通过循环伏安法(CV)和电化学阻抗法(EIS)测试了聚吡咯膜在NaCl溶液中‘过电位’电化学过程前后及不同电位下聚吡咯膜的电化学性能.同时,通过嵌入和脱出Na+和Cl-离子的聚吡咯膜在特定溶液中电化学阻抗图谱,研究了离子的嵌入对聚吡咯膜电化学性能的影响.结果表明‘过电位’现象可以提高聚吡咯膜的离子电导率和膜电容,Cl-离子的嵌入能提高PPy/pTS的电导率,而Na+离子的嵌入对聚吡咯膜的电导率影响不大.另外,嵌入离子对聚吡咯膜形貌的改变会对聚吡咯膜的离子传导率有一定影响,从而导致膜的电化学阻抗的变化.     

Electroconductive Hydrogels: Electrical and Electrochemical Properties of Polypyrrole‐Poly(HEMA) Composites

Composites of inherently conductive polypyrrole (PPy) within highly hydrophilic poly(2‐hydroxyethyl methacrylate)‐based hydrogels (p(HEMA)) have been fabricated and their electrochemical properties investigated. The electrochemical characteristics observed by cyclic voltammetry suggest less facile reduction of PPy within the composite hydrogel compared to electropolymerized PPy, as shown by the shift in the reduction peak potential from ?472 mV for electropolymerized polypyrrole to ?636 mV for the electroconductive composite gel. The network impedance magnitude for the electroconductive hydrogel remains quite low, ca. 100 Ω, even upon approach to DC, over all frequencies and at all offset potentials suggesting retained electronic (bipolaronic) conductivity within the composite. In contrast, sustained application of +0.7 V (vs. Ag/AgCl, 3 M Cl^?) for typically 100 min. (conditioning) to reduce the background amperometric current to <1.0 μA, resulted in complete loss of electroactivity. Nyquist plots suggest that sustained application of such a modest potential to the composite hydrogel results in impedance characteristics that resembles p(HEMA) without evidence of the conducting polymer component. PPy composite gels supported a larger ferrocene monocarboxylate diffusivity (D_appt=7.97×10^?5 cm² s^?1) compared to electropolymerized PPy (D_appt=5.56×10^?5 cm² s^?1), however a marked reduction in diffusivity (D_appt=1.01×10^?5 cm² s^?1) was observed with the conditioned hydrogel composite. Cyclic voltammograms in buffer containing H₂O₂ showed an absence of redox peaks for electrodes coated with PPy‐containing membranes, suggesting possible chemical oxidation of polypyrrole by the oxidant     

The Electrochemical Behavior of a N‐containing Calix[4]arene Derivative

The electrochemical behavior of 5,11,17,23‐Tetrakis‐dimethylaminomethylcalix[4]arene (DCA) has been investigated by cyclic voltammetry (CV). The results show that there is an irreversible electrochemical oxidative wave with peak potential of 1.35 V in chloroform at a glassy carbon electrode. The kinetic parameters of the andic wave, such as α, n and k_s, were discussed. In addition, a new pair of quasi‐reversible redox peaks with peak potentials of 0.72 V and 0.94 V was found. It can result in DCA electrodeposition at the electrode surface. This film modified electrode was characterized by CV and electrochemical impedance spectroscopy (EIS). Moreover, the possible mechanism of electrodeposition was also discussed     

The Electrochemical Behavior of p‐tert‐Butyl‐sulfonylcalix[4]arene and Its Selective Complexation with Metal Ions at Water‐Air Interface

The electrochemical behavior of p‐tert‐butyl‐sulfonylcalix[4]arene (SCA) has been investigated by cyclic voltammetry. The results show that there is an irreversible electrochemical oxidative wave when the potential ranges from 0.9 to 1.9 V versus saturated calomel electrode (SCE) in CH₂Cl₂ at a glassy carbon electrode. The kinetic parameters of the andic wave, such as α,n, k_s, D and the diffusion activation energy (E_d), were discussed. In addition, the interaction of SCA with metal ions at the water‐air interface was also discussed by Langmuir‐Blodgett (LB) techniques. The results confirm that the selectivity of SCA as ligand for Pb²⁺ in monomolecular film is very high by complexation action, which provide the foundation that LB film of SCA modified glassy carbon electrode (GCE) as voltammetric sensor to detect trace amounts of Pb²⁺.     

Interference‐Free Electrochemical Detection of Nanomolar Dopamine Using Doped Polypyrrole and Silver Nanoparticles

This paper presents a new approach to detect dopamine in nanomolar range using an electrochemical sensor utilizing a composite made of chitosan‐stabilized silver nanoparticles and p‐toluene sulfonic acid‐doped ultrathin polypyrrole film. Studies included cyclic voltammogram, amperometry, differential pulse voltammetry and also investigation by electrochemical impedance spectroscopy. A detection limit of 0.58 nM was achieved in the linear range 1×10^?9 M to 1.2×10^?7 M. High sensitivity towards DA, good reproducibility and long‐term stability have been demonstrated without interference from ascorbic acid, uric acid, epinephrine, L ‐dopa, glucose. The sensing system was successfully applied for quantitative determination of dopamine in commercially available human blood serum.     

对叔丁基杯[10]冠醚的合成

首次合成一系列杯[10]冠醚。通过将对叔丁基杯[10]芳烃和乙二醇双对甲苯磺酸酯或多甘醇双对甲苯磺酸酯在K2CO3/甲苯或Cs2CO3/丙酮体系中反应,得到一系列杯[10]冠醚:1,2-杯[10]冠-4、1,3-杯[10]冠-2、1,2-,1,3-杯[10]冠-3、1,4-杯[10]冠-4、和1,6-杯[10]冠-4。     

Comparison of pillar[5]arene and calix[4]arene anion receptor ability in aqueous media

Abstract

Recognition ability of both cationic pillar[5]arene and calix[4]arene has been studied in aqueous media. Anion complexation can be evaluated from their ability to complex their counterions as well as an added external organic anion. DOSY NMR experiments and fluorescence quenching show that pillararenes have a larger ability for including their own counterions than calixarenes irrespective of the anion (tetrafluoroborate or chloride or bromide) and the structure of the cationic moiety (trimethylammonium or methylimidazolium). Counterion complexation shows a picture where four to five positive charges of the pillar[5]arene are neutralised, meanwhile only one positive charge of the calixarene is neutralised for a 1 mM solution of the macrocycle. Irrespective of the smaller net positive charge in the pillar[5]arene, its binding ability for organic anions (toluenesulfonate or hydroxybenzoate) is larger than for calix[4]arene allowing a better accommodation of the guest in its cavity. The larger separation between the cationic groups of the receptor and its electron-rich aromatic region improves the anion recognition ability for pillar[5]arene.     

氧化石墨烯/聚吡咯插层复合材料的制备和电化学电容性能

以FeCl₃-甲基橙(MO)为模板, 通过化学原位聚合法成功制备出氧化石墨烯/聚吡咯(GO/PPy)插层复合材料. 采用X射线衍射(XRD)、傅里叶变换红外(FTIR)光谱、扫描电镜(SEM)和透射电镜(TEM)等测试技术对复合材料进行物性表征. 此外, 利用循环伏安、恒电流充放电和交流阻抗测试方法对复合材料在两种不同水系电解液(1 mol·L^-1 Na₂SO₄和1 mol·L^-1 H₂SO₄)中的电化学性能进行了研究. 结果显示: 氧化石墨烯和聚吡咯表现出各自优势并发挥协同作用, 使得GO/PPy插层复合材料在中性和酸性电解液中都显示出可观的比电容. 电流密度为0.5 A·g^-1时, GO/PPy 插层复合材料在Na₂SO₄和H₂SO₄电解液中的比电容分别为449.1 和619.0 F·g^-1, 明显高于纯PPy的比电容. 经过800 次循环稳定性测试后, 两种不同电解液中, 复合材料初始容量的保持率分别为92%和62%. 其中酸性电解液体系中初始容量更大, 而中性溶液中具有更稳定的循环性能.     

四对-乙酰胺苯磺酰氧基杯[4]芳烃的合成

以对叔丁基苯酚为起始原料,通过缩合、取代反应合成了25,26,27,28-四对-乙酰胺苯磺酰氧基对叔丁基杯[4]芳烃,其结构经FT—IR,^1H NMR和FAB-MS表征。     

A Dodecalanthanide Wheel Supported by p‐tert‐Butylsulfonylcalix[4]arene

A dodecaholmium wheel of [Ho₁₂(L)₆(mal)₄(AcO)₄(H₂O)₁₄] ( 1 ; mal=malonate) was synthesized by using p‐tert‐butylsulfonylcalix[4]arene (H₄L) as a cluster‐forming ligand. The wheel consists of three fragments of mononuclear A^3? ([Ho(L)(mal)(H₂O)]^3?), trinuclear B^3? ([Ho(H₂O)₂(mal)(Ho(L)(AcO))₂]^3?), and C³⁺ ([Ho(H₂O)₂]³⁺), and an alternate arrangement of these fragments (A^3?? C³⁺? B^3?? C³⁺? A^3?? C³⁺? B^3?? C³⁺? ) results in a wheel structure. The longest and shortest diameters of the core were estimated to be 17.7562(16) and 13.6810(13) Å, respectively, and the saddle‐shaped molecule possesses a pocketlike cavity inside.     

Synthesis of Calix[4]arene Derivatives with NLO Properties

The new chromophore compounds with NLO properties were prepared by Knoevenagel condensation from forrnyl or diformyl calix[4/arene and isophorone derivatives in the presence of piperidine and acetic acid, respectively. In these chromophore calix[4]arenes, the ring locked trienes were employed as the conjugation bridge and electron acceptor in D-π-A units. The NMR spectra demonstrated that they existed in a cone conformation and consequently non-conjugated D-π-A units could be oriented at nearly the same direction.     

Studies on Properties of p—Nitrophenylazo Calix[4]arene Derivatives

The p-nitrophenylazo calix[4] arene derivatives la-ld with nonlinear optical(NLO)properties were prepared by the diazo-coupling reaction of calix[4]arene with p-nitrophenyl diazonium.The diazotization reaction of p-nltroaniline was caried out with isoamyl nitrite as a source of nitrous acid in EtONa/EtOH under refluxing conditon.X-Ray crystallographic analysis and ^1H NMR sptectra reveal that they exist as cone conformation in crystal state or in soution.HRS measurements at 1064 nm in THF indicate that p-nitrophenylazo calix[4]arenes have higher hyperpolarizability βz values than the corresponding reference compound 4-(4-nitrophenylazo)-2,6-dimethyl-phenol,without red shift of the charge transfer band.The tetrakis p-nitropheylazo calix[4]arene(2)with longer alkyl chains can form monolayer aht the air/water interface.     

Inclusion of p‐sulfonatothiacalix[4]arene and its metal complexes

As a new member of the water‐soluble calixarene family, p‐sulfonatothiacalix[4]arene possesses unique properties resulting from its inherent structural characteristics. In our recent research, we have investigated the self‐assembly of bowl‐like p‐sulfonatothiacalix[4]arenes with or without transition‐metal ions in the presence of suitable guests. We have obtained a series of compounds with different structural motifs, such as capsules, tetranuclear clusters, and molecular clefts. In addition, p‐sulfonatothiacalix[4]arenes show good inclusion abilities and can capture different guests by utilizing their hydrophobic cavities through supramolecular interactions. Even when a cone‐like conformation is fixed, the p‐sulfonatothiacalix[4]arene can also splay its opposite aromatic rings apart to adjust its cone‐like conformations from C_4v to C_2v and even lower symmetries. All of these show that it is a good candidate for the research of inclusion phenomena. © 2009 The Japan Chemical Journal Forum and Wiley Periodicals, Inc. Chem Rec 9: 155–168; 2009: Published online in Wiley InterScience ( www.interscience.wiley.com ) DOI 10.1002/tcr.200800033     

Molecular recognition of amphiphilic p-sulfonatocalix[4]arene with organic ammoniums

The binding abilities and thermodynamic origin for the intermolecular complexation of two water-soluble calixarenes, p-sulfonatocalix[4]arene (SC4A) and 5,11,17,23-tetrasulfonato-25,26,27,28-tetrakis(n-butyl)-calix[4]arene (SC4A-Bu), with six organic cations: 1,4-diazabicyclo[2,2,2]octane (G1), 3,5,6,8,-tetrahydropyrazino[1,2,3,4-Imn][1,10]phenanthroline (G2), diquat (G3), paraquat (G4), 1-methylpyridin-1-ium (G5) and 1,3-dimethylimidazolium (G6), have been determined by means of isothermal titration calorimetry in aqueous solutions at pH 7.0, 298.15 K, and their binding modes have been investigated by NMR spectroscopy. The obtained results indicate that the binding modes of SC4A-Bu and SC4A change a little but their binding affinities show great difference, resulting from the distinguishable binding thermodynamics. The binding selectivity of G1 is up to 688 times for the SC4A/SC4A-Bu hosts, and SC4A-Bu prefers to include planer molecules of large π system with low electron density. The aggregation behaviours of SC4A-Bu before and after complexation with G3 were then investigated, showing that G3 is able to induce the aggregation of SC4A-Bu.     

Electrochemical Aptasensor Based on Poly(Neutral Red) and Carboxylated Pillar[5]arene for Sensitive Determination of Aflatoxin M1

Aptasensor for highly sensitive determination of aflatoxin M1 (AFM1) was developed on the base of glassy carbon electrode (GCE) covered with polymeric Neutral red (NR) dye obtained by electropolymerization in the presence of polycarboxylated pillar[5]arene derivative. Aptamer against AFM1 and NR label were then covalently linked to the carboxylic groups of the carrier by carbodiimide binding. At presence of AFM1 the cathodic peak current related to the NR conversion decreases. AFM1 induced also an increase of the charge transfer resistance measured by electrochemical impedance spectroscopy. In optimal conditions, this make it possible to determine from 5 to 120 ng/L AFM1 in standard solutions with limit of detection (LOD) of 0.5 ng/L. The aptasensor was validated on the spiked samples of cow and sheep milk as well as in kefir after their methanol dilution. Reliable detection of the 40–160 ng/kg of mycotoxins was reached. This is below limited threshold value (50 μg/kg) established in EC.     

Determination of Copper at a Glassy Carbon Electrode Modified with Langmuir–Blodgett Film of p‐tert‐Butylthiacalix[4]arene

A new type of voltammetric sensor, Langmuir–Blodgett film of p‐tert‐butylthiacalix[4]arene modified glassy carbon electrode, was advanced and used for determining copper at trace levels by differential pulse stripping voltammetry. Calibration plot was found to be linear in the range of 2×10^?8 M to 5×10^?6 M; the detection limit was 2×10^?9 M. Possible recognition mechanism was also discussed. From determination of Copper in real samples (river, lake and tap water) it can be concluded that the method is rapid, sensitive in determining of copper and can be used in the analysis of natural water samples.