One‐pot Synthesis of CdS Nanocrystals Hybridized with Single‐Layer Transition‐Metal Dichalcogenide Nanosheets for Efficient Photocatalytic Hydrogen Evolution

Exploration of low‐cost and earth‐abundant photocatalysts for highly efficient solar photocatalytic water splitting is of great importance. Although transition‐metal dichalcogenides (TMDs) showed outstanding performance as co‐catalysts for the hydrogen evolution reaction (HER), designing TMD‐hybridized photocatalysts with abundant active sites for the HER still remains challenge. Here, a facile one‐pot wet‐chemical method is developed to prepare MS₂–CdS (M=W or Mo) nanohybrids. Surprisedly, in the obtained nanohybrids, single‐layer MS₂ nanosheets with lateral size of 4–10 nm selectively grow on the Cd‐rich (0001) surface of wurtzite CdS nanocrystals. These MS₂–CdS nanohybrids possess a large number of edge sites in the MS₂ layers, which are active sites for the HER. The photocatalytic performances of WS₂–CdS and MoS₂–CdS nanohybrids towards the HER under visible light irradiation (>420 nm) are about 16 and 12 times that of pure CdS, respectively. Importantly, the MS₂–CdS nanohybrids showed enhanced stability after a long‐time test (16 h), and 70 % of catalytic activity still remained.     

Ionic‐Liquid‐Mediated Active‐Site Control of MoS2 for the Electrocatalytic Hydrogen Evolution Reaction

The layered crystal MoS₂ has been proposed as an alternative to noble metals as the electrocatalyst for the hydrogen evolution reaction (HER). However, the activity of this catalyst is limited by the number of available edge sites. It was previously shown that, by using an imidazolium ionic liquid as synthesis medium, nanometre‐size crystal layers of MoS₂ can be prepared which exhibit a very high number of active edge sites as well as a de‐layered morphology, both of which contribute to HER electrocatalytic activity. Herein, it is examined how to control these features synthetically by using a range of ionic liquids as synthesis media. Non‐coordinating ILs with a planar heterocyclic cation produced MoS₂ with the de‐layered morphology, which was subsequently shown to be highly advantageous for HER electrocatalytic activity. The results furthermore suggest that the crystallinity, and in turn the catalytic activity, of the MoS₂ layers can be improved by employing an IL with specific solvation properties. These results provide the basis for a synthetic strategy for increasing the HER electrocatalytic activity of MoS₂ by tuning its crystal properties, and thus improving its potential for use in hydrogen production technologies.     

Understanding the Solvent Effect on the Catalytic Oxidation of 1,4‐Butanediol in Methanol over Au/TiO2 Catalyst: NMR Diffusion and Relaxation Studies

The effect of water on the catalytic oxidation of 1,4‐butanediol in methanol over Au/TiO₂ has been investigated by catalytic reaction studies and NMR diffusion and relaxation studies. The addition of water to the dry catalytic system led to a decrease of both conversion and selectivity towards dimethyl succinate. Pulsed‐field gradient (PFG)‐NMR spectroscopy was used to assess the effect of water addition on the effective self‐diffusivity of the reactant within the catalyst. NMR relaxation studies were also carried out to probe the strength of surface interaction of the reactant in the absence and presence of water. PFG‐NMR studies revealed that the addition of water to the initial system, although increasing the dilution of the system, leads to a significant decrease of effective diffusion rate of the reactant within the catalyst. From T₁ and T₂ relaxation measurements it was possible to infer the strength of surface interaction of the reactant with the catalyst surface. The addition of water was found to inhibit the adsorption of the reactant over the catalyst surface, with the T₁/T₂ ratio of 1,4‐butanediol decreasing significantly when water was added. The results overall suggest that both the decrease of diffusion rate and adsorption strength of the reactant within the catalyst, due to water addition, limits the access of reactant molecules to the catalytic sites, which results in a decrease of reaction rate and conversion.     

Maximizing the Catalytic Activity of Nanoparticles through Monolayer Assembly on Nitrogen‐Doped Graphene

We report a facile method for assembly of a monolayer array of nitrogen‐doped graphene (NG) and nanoparticles (NPs) and the subsequent transfer of two layers onto a solid substrate (S). Using 3 nm NiPd NPs as an example, we demonstrate that NiPd‐NG‐Si (Si=silicon wafer) can function as a catalyst and show maximum NiPd catalysis for the hydrolysis of ammonia borane (H₃NBH₃, AB) with a turnover frequency (TOF) of 4896.8 h^?1 and an activation energy (E_a) of 18.8 kJ mol^?1. The NiPd‐NG‐S catalyst is also highly active for catalyzing the transfer hydrogenation from AB to nitro compounds, leading to the green synthesis of quinazolines in water. Our assembly method can be extended to other graphene and NP catalyst materials, providing a new 2D NP catalyst platform for catalyzing multiple reactions in one pot with maximum efficiency.     

Facile Synthesis of Thermal‐ and Photostable Titania with Paramagnetic Oxygen Vacancies for Visible‐Light Photocatalysis

A novel dopant‐free TiO₂ photocatalyst (V_o^.‐TiO₂), which is self‐modified by a large number of paramagnetic (single‐electron‐trapped) oxygen vacancies, was prepared by calcining a mixture of a porous amorphous TiO₂ precursor, imidazole, and hydrochloric acid at elevated temperature (450 °C) in air. Control experiments demonstrate that the porous TiO₂ precursor, imidazole, and hydrochloric acid are all necessary for the formation of V_o^.‐TiO₂. Although the synthesis of V_o^.‐TiO₂ originates from such a multicomponent system, this synthetic approach is facile, controllable, and reproducible. X‐ray diffraction, XPS, and EPR spectroscopy reveal that the V_o^.‐TiO₂ material with a high crystallinity embodies a mass of paramagnetic oxygen vacancies, and is free of other dopant species such as nitrogen and carbon. UV/Vis diffuse‐reflectance spectroscopy and photoelectrochemical measurement demonstrate that V_o^.‐TiO₂ is a stable visible‐light‐responsive material with photogenerated charge separation efficiency higher than N‐TiO₂ and P25 under visible‐light irradiation. The V_o^.‐TiO₂ material exhibits not only satisfactory thermal‐ and photostability, but also superior photocatalytic activity for H₂ evolution (115 μmol h^?1 g^?1) from water with methanol as sacrificial reagent under visible light (λ>400 nm) irradiation. Furthermore, the effects of reaction temperature, ratio of starting materials (imidazole:TiO₂ precursor) and calcination time on the photocatalytic activity and the microstructure of V_o^.‐TiO₂ were elucidated.     

Solvent Effect and Reactivity Trend in the Aerobic Oxidation of 1,3‐Propanediols over Gold Supported on Titania: NMR Diffusion and Relaxation Studies

In recent work, it was reported that changes in solvent composition, precisely the addition of water, significantly inhibits the catalytic activity of Au/TiO₂ catalyst in the aerobic oxidation of 1,4‐butanediol in methanol due to changes in diffusion and adsorption properties of the reactant. In order to understand whether the inhibition mechanism of water on diol oxidation in methanol is generally valid, the solvent effect on the aerobic catalytic oxidation of 1,3‐propanediol and its two methyl‐substituted homologues, 2‐methyl‐1,3‐propanediol and 2,2‐dimethyl‐1,3‐propanediol, over a Au/TiO₂ catalyst has been studied here using conventional catalytic reaction monitoring in combination with pulsed‐field gradient nuclear magnetic resonance (PFG‐NMR) diffusion and NMR relaxation time measurements. Diol conversion is significantly lower when water is present in the initial diol/methanol mixture. A reactivity trend within the group of diols was also observed. Combined NMR diffusion and relaxation time measurements suggest that molecular diffusion and, in particular, the relative strength of diol adsorption, are important factors in determining the conversion. These results highlight NMR diffusion and relaxation techniques as novel, non‐invasive characterisation tools for catalytic materials, which complement conventional reaction data.     

Solvent Effects in Acid‐Catalyzed Biomass Conversion Reactions

Reaction kinetics were studied to quantify the effects of polar aprotic organic solvents on the acid‐catalyzed conversion of xylose into furfural. A solvent of particular importance is γ‐valerolactone (GVL), which leads to significant increases in reaction rates compared to water in addition to increased product selectivity. GVL has similar effects on the kinetics for the dehydration of 1,2‐propanediol to propanal and for the hydrolysis of cellobiose to glucose. Based on results obtained for homogeneous Brønsted acid catalysts that span a range of pK_a values, we suggest that an aprotic organic solvent affects the reaction kinetics by changing the stabilization of the acidic proton relative to the protonated transition state. This same behavior is displayed by strong solid Brønsted acid catalysts, such as H‐mordenite and H‐beta.     

Construction of Shallow Surface States through Light Ni Doping for High‐Efficiency Photocatalytic Hydrogen Production of CdS Nanocrystals

Ni‐doped CdS nanowires were synthesized by a simple one‐step method. X‐ray diffraction, X‐ray photoelectron spectroscopy, and photoluminescence spectroscopy confirmed that light Ni doping can form shallow surface states due to the presence of substitutional Ni ions, and heavy Ni doping can form deep surface states due to the presence of interstitial Ni ions. Surface photovoltage spectroscopy and transient photovoltage measurements revealed that the shallow surface states can prolong the lifetime of the photogenerated charge carriers, whereas the deep surface states lead to recombination of the photogenerated charge carriers. The relationship between different surface states and the photocatalytic performance of CdS nanocrystals are discussed. The enhanced density of shallow surface states due to light Ni doping significantly promotes photocatalytic H₂ production.     

LED‐Illuminated NMR Studies of Flavin‐Catalyzed Photooxidations Reveal Solvent Control of the Electron‐Transfer Mechanism

Mechanistic insights into chemical photocatalysis are mainly the domain of UV/Vis spectroscopy, because NMR spectroscopy has been limited by the type of illumination so far. An improved LED‐based illumination device can be used to obtain NMR reaction profiles of photocatalytic reactions under synthetic conditions and perform both photo‐CIDNP and intermediate studies. Flavin‐catalyzed photooxidations of alcohols show the potential of this setup. After identical initial photoreaction steps the stabilization of a downstream intermediate is the key to the further reaction mechanism and the reactivity. As a chemical photocatalyst flavin can act either as a one‐ or a two‐electron mediator when the stability of the zwitterionic radical pair is moldulated in different solvents. This demonstrates the importance of downstream intermediates and NMR‐accessible complementary information in photocatalytic reactions and suggests the control of photoorganic reactions by solvent effects.     

Influence of Solvent Polarity and Hydrogen Bonding on the Electronic Transition of Coumarin 120: A TDDFT Study

The characteristics of the electronic transition energy of Coumarin 120 (C120) and its H‐bonded complexes in various solvents have been examined by time‐dependent density functional theory (TDDFT) in combination with a polarizable continuum solvent model (PCM). Molecular structures of C120 and its H‐bonded complexes are optimized with the B3LYP method in PCM solution, and the dihedral angle H14? N13? C7? H15 is dependent on solvent polarity and the type of H‐bond. A linear correlation of the absorption maximum of C120 with the solvent polarity function is revealed with the PCM model for all solvents except DMSO. The experimental absorption maximum of C120 in nine solvents is well described by a PCM–TDDFT scheme augmented with explicit inclusion of a few H‐bonded solvent molecules, and quantitative agreement between our calculated results and experimental measurements is obtained with an average error of less than 2 nm. H‐bonding at three different sites shifts the absorption wavelength of C120 either to the blue or to the red, that is, a significant role is played by solvent molecules in the first solvation shell in determining the electronic transition energy of C120. The dependence on the H‐bonding site and solvent polarity is examined by using the Kamlet–Taft equation for solvatochromism.     

Deep Desulfurization by Amphiphilic Lanthanide‐Containing Polyoxometalates in Ionic‐Liquid Emulsion Systems under Mild Conditions

Amphiphilic lanthanide‐containing polyoxometalates (POMs) were prepared by surfactant encapsulation. Investigation of these lanthanide‐containing POMs in oxidative desulfurization (ODS) showed that highly efficient deep desulfurization could be achieved in only 14 min with 100 % conversion of dibenzothiophene under mild conditions by using (DDA)₉LaW₁₀/[omim]PF₆ (DDA=dimethyldioctadecylammonium, omim=1‐octyl‐3‐methyl‐imidazolium) in the presence of H₂O₂. Furthermore, deep desulfurization proceeds smoothly in model oil with an S content as low as 50 ppm. A scaled‐up experiment in which the volume of model oil was increased from 5 to 1000 mL with S content of 1000 ppm indicated that about 99 % sulfur removal can be achieved in 40 mins in an ionic‐liquid emulsion system. To the best of our knowledge, the (DDA)₉LaW₁₀/[omim]PF₆ catalyst system with H₂O₂ as oxidant is one of the most efficient desulfurization systems reported so far.     

Photocatalytic Hydrogen Evolution by Oleic Acid‐Capped CdS,CdSe, and CdS0.75Se0.25 Alloy Nanocrystals

Photocatalytic generation of hydrogen by using oleic acid‐capped CdS, CdSe, and CdS_0.75Se_0.25 alloy nanocrystals (quantum dots) has been investigated under visible‐light irradiation by employing Na₂S and Na₂SO₃ as hole scavengers. Highly photostable CdS_0.75Se_0.25 alloy nanocrystals gave the highest hydrogen evolution rate (1466 μmol h^?1 g^?1), which was about three times higher than that of CdS and seven times higher than that of CdSe.     

Perovskite Oxide Nanosheets with Tunable Band‐Edge Potentials and High Photocatalytic Hydrogen‐Evolution Activity

Perovskite nanosheets of HCa_2?xSr_xNb₃O₁₀ and HCa₂Nb_3?yTa_yO₁₀ with controlled band‐edge potentials were prepared. They worked as highly efficient heterogeneous photocatalysts for H₂ evolution from a water/methanol mixture under band‐gap irradiation. The activity was found to depend on the composition. The highest activity was obtained with HCa₂Nb₂TaO₁₀ nanosheets, recording an apparent quantum yield of approximately 80 % at 300 nm, which is the highest value for a nanosheet‐based photocatalyst reported to date.     

Source of Selectivity in Oxidative Cross‐Coupling of Aryls by Solvent Effect of 1,1,1,3,3,3‐Hexafluoropropan‐2‐ol

Solvents such as 1,1,1,3,3,3‐hexafluoroisopropanol (HFIP) with a high capacity for donating hydrogen bonds generate solvates that enter into selective cross‐coupling reactions of aryls upon oxidation. When electric current is employed for oxidation, reagent effects can be excluded and a decoupling of nucleophilicity from oxidation potential can be achieved. The addition of water or methanol to the electrolyte allows a shift of oxidation potentials in a specific range, creating suitable systems for selective anodic cross‐coupling reactions. The shift in the redox potentials depends on the substitution pattern of the substrate employed. The concept has been expanded from arene–phenol to phenol–phenol as well as phenol–aniline cross‐coupling. This driving force for selectivity in oxidative coupling might also explain previous findings using HFIP and hypervalent iodine reagents.     

Stereoselectivity of the Hydrogen‐Atom Transfer in Benzophenone–Tyrosine Dyads: An Intramolecular Kinetic Solvent Effect

To be or not to be solvated is the decisive parameter that controls the photoinduced hydrogen‐atom transfer in diastereomeric ketone/phenol dyads. A kinetic solvent effect that refers to hydrogen bonding between the phenol and the solvent is suggested to be the main source of the stereoselective discrimination in the hydrogen transfer (see figure).

     

Homogenous Boron‐doping in Self‐sensitized Carbon Nitride for Enhanced Visible‐light Photocatalytic Activity

We report a solvothermal approach for the preparation of homogeneously B‐doped self‐sensitized carbon nitride (B‐SSCN) composed of a core of B‐doped carbon nitride microspheres and a covalently linked shell of s‐triazine oligomers. Compared to the undoped structure, the obtained B‐SSCN photocatalyst exhibits an enhanced visible‐light activity, excellent stability for photocatalytic hydrogen generation due to a reduced band‐gap, enhanced charge‐separation efficiency, and better surface reactivity of B‐SSCN. This work provides a new strategy to uniformly insert heteroatoms into the polymeric carbon nitride framework for the development of metal‐free photocatalysts towards efficient production of solar fuels.     

Nanojunction‐Mediated Photocatalytic Enhancement in Heterostructured CdS/ZnO,CdSe/ZnO,and CdTe/ZnO Nanocrystals

A series of highly efficient semiconductor nanocrystal (NC) photocatalysts have been synthesized by growing wurtzite‐ZnO tetrahedrons around pre‐formed CdS, CdSe, and CdTe quantum dots (QDs). The resulting contact between two small but high‐quality crystals creates novel CdX/ZnO heterostructured semiconductor nanocrystals (HSNCs) with extensive type‐II nanojunctions that exhibit more efficient photocatalytic decomposition of aqueous organic molecules under UV irradiation. Catalytic testing and characterization indicate that catalytic activity increases as a result of a combination of both the intrinsic chemistry of the chalcogenide anions and the heterojunction structure. Atomic probe tomography (APT) is employed for the first time to probe the spatial characteristics of the nanojunction between cadmium chalcogenide and ZnO crystalline phases, which reveals various degrees of ion exchange between the two crystals to relax large lattice mismatches. In the most extreme case, total encapsulation of CdTe by ZnO as a result of interfacial alloying is observed, with the expected advantage of facilitating hole transport for enhanced exciton separation during catalysis.     

Two Series of Homodinuclear Lanthanide Complexes: Greatly Enhancing Energy Barriers through Tuning Terminal Solvent Ligands in Dy2 Single‐Molecule Magnets

The utilization of 2‐ethoxy‐6‐{[(2‐hydroxy‐3‐methoxybenzyl)imino]methyl}phenol (H₂L) as a chelating ligand, in combination with the employment of alcohols (EtOH and MeOH) as auxiliary ligands, in 4 f‐metal chemistry afforded two series of dinuclear lanthanide complexes of compositions [Ln₂L₂(NO₃)₂(EtOH)₂] (Ln=Sm ( 1 ), Eu ( 2 ), Gd ( 3 ), Tb ( 4 ), Dy ( 5 ), Ho ( 6 ), Er ( 7 )) and [Ln₂L₂(NO₃)₂(MeOH)₂] (Ln=Sm ( 8 ), Eu ( 9 ), Gd ( 10 ), Tb ( 11 ), Dy ( 12 ), Ho ( 13 ), Er ( 14 )). The structures of 1 – 14 were determined by single‐crystal X‐ray crystallography. Complexes 1 – 7 are isomorphous. The two lanthanide(III) ions in 1 – 7 are doubly bridged by two deprotonated aminophenoxide oxygen atoms of two μ₂:η⁰:η¹:η²:η¹:η¹:η⁰‐L²⁻ ligands. One nitrogen atom, two oxygen atoms of the NO₃⁻ anion, two methoxide oxygen atoms of two ligand sets, and one oxygen atom of the terminally coordinated EtOH molecule complete the distorted dodecahedron geometry of each lanthanide(III) ion. Compounds 8 – 14 are isomorphous and their structures are similar to those of 1 – 7 . The slight difference between 1 – 7 and 8 – 14 stems from purposefully replacing the EtOH ligands in 1 – 7 with MeOH in 8 – 14 . Direct‐current magnetic susceptibility studies in the 2–300 K range reveal weak antiferromagnetic interactions for 3 , 4 , 7 , 10 , 11 , and 14 , and ferromagnetic interactions at low temperature for 5 , 6 , 12 , and 13 . Complexes 5 and 12 exhibit single‐molecule magnet (SMM) behavior with energy barriers of 131.3 K for 5 and 198.8 K for 12 . The energy barrier is significantly enhanced by dexterously regulating the terminal ligands. To rationalize the observed difference in the magnetic behavior, complete‐active‐space self‐consistent field (CASSCF) calculations were performed on two Dy₂ complexes. Subtle variation in the angle between the magnetic axes and the vector connecting two dysprosium(III) ions results in a weaker influence on the tunneling gap of individual dysprosium(III) ions by the dipolar field in 12 . This work proposes an efficient strategy for synthesizing Dy₂ SMMs with high energy barriers.