Homogeneous human complex-type oligosaccharides in correctly folded intact glycoproteins: evaluation of oligosaccharide influence on protein folding, stability, and conformational properties

The N-glycosylation of proteins is generated at the consensus sequence NXS/T (where X is any amino acid except proline) by the biosynthetic process, and occurs in the endoplasmic reticulum and Golgi apparatus. In order to investigate the influence of human complex-type oligosaccharides on counterpart protein conformation, crambin and ovomucoide, which consist of 46 and 56 amino acid residues, respectively, were selected for synthesis of model glycoproteins. These small glycoproteins were intentionally designed to be glycosylated at the α-helix (crambin: 8?position), β-sheet (crambin: 2?position) and loop position between the antiparallel β-sheets (ovomucoide: 28?position), and were synthesized by using a peptide-segment coupling strategy. After preparation of these glycosylated polypeptide chains, protein folding experiments were performed under redox conditions by using cysteine-cystine. Although the small glycoproteins bearing intentional glycosylation at the α-helix and β-sheet exhibited a suitable folding process, glycosylation at the loop position between the antiparallel β-strands caused multiple products. The conformational differences in the isolated homogeneous glycoproteins compared with non-glycosylated counterparts were evaluated by circular dichroism (CD) and NMR spectroscopy. These analyses suggested that this intentional N-glycosylation did not result in large conformational changes in the purified protein structures, including the case of glycosylation at the loop position between the antiparallel β-strands. In addition to these experiments, the conformational properties of three glycoproteins were evaluated by CD spectroscopy under different temperatures. The oligosaccharides on the protein surface fluctuated considerably; this was dependent on the increase in the solution temperature and was thought to disrupt the protein tertiary structure. Based on the measurement of the CD spectra, however, the glycoproteins bearing three disulfide bonds did not exhibit any change in their protein tertiary structure. These results suggest that the oligosaccharide conformational fluctuations were not disruptive to protein tertiary structure, and the tertiary structure of glycoproteins might be stabilized by the disulfide bond network.     

1,2,3‐Triazole Bridge as Conformational Constrain in β‐Hairpin Peptides: Analysis of Hydrogen‐Bonded Positions

Conformational constrained β‐hairpin peptides are useful tool to modulate protein–protein interactions. A triazole bridge in hydrogen‐bonded positions between two antiparallel strands induces a conformational stabilization of the β‐hairpin peptide. The entity of the stability of the β‐hairpin peptide depends on the length of the bridge.     

Heat‐Induced Supramolecular Organogels Composed of α‐Cyclodextrin and “Jellyfish‐Like” β‐Cyclodextrin–Poly(ε‐caprolactone)

In general, the complexation and gelation behavior between biocompatible poly(ε‐caprolactone) (PCL) derivatives and α‐cyclodextrin (α‐CD) is extensively studied in water, but not in organic solvents. In this article, the complexation and gelation behavior between α‐CD and multi‐arm polymer β‐cyclodextrin‐PCL (β‐CD‐PCL) with a unique “jellyfish‐like” structure are thoroughly investigated in organic solvent N,N‐dimethylformamide and a new heat‐induced organogel is obtained. However, PCL linear polymers cannot form organogels under the same condition. The complexation is characterized by rheological measurements, DSC, XRD, and SEM. The SEM images reveal that the complexes between β‐CD‐PCL and α‐CD present a novel topological helix porous structure which is distinctly different from the lamellar structure formed by PCL linear polymers and α‐CD, suggesting the unique “jellyfish‐like” structure of β‐CD‐PCL is crucial for the formation of the organogels. This research may provide insight into constructing new supramolecular organogels and potential for designing new functional biomaterials. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1598–1606     

Synthesis and Conformational Analysis of Hybrid α/β‐Dipeptides Incorporating S‐Glycosyl‐β2,2‐Amino Acids

We synthesized and carried out the conformational analysis of several hybrid dipeptides consisting of an α‐amino acid attached to a quaternary glyco‐β‐amino acid. In particular, we combined a S‐glycosylated β^2,2‐amino acid and two different types of α‐amino acid, namely, aliphatic (alanine) and aromatic (phenylalanine and tryptophan) in the sequence of hybrid α/β‐dipeptides. The key step in the synthesis involved the ring‐opening reaction of a chiral cyclic sulfamidate, inserted in the peptidic sequence, with a sulfur‐containing nucleophile by using 1‐thio‐β‐D ‐glucopyranose derivatives. This reaction of glycosylation occurred with inversion of configuration at the quaternary center. The conformational behavior in aqueous solution of the peptide backbone and the glycosidic linkage for all synthesized hybrid glycopeptides was analyzed by using a protocol that combined NMR experiments and molecular dynamics with time‐averaged restraints (MD‐tar). Interestingly, the presence of the sulfur heteroatom at the quaternary center of the β‐amino acid induced θ torsional angles close to 180° (anti). Notably, this value changed to 60° (gauche) when the peptidic sequence displayed aromatic α‐amino acids due to the presence of CH–π interactions between the phenyl or indole ring and the methyl groups of the β‐amino acid unit.     

Micelle‐Triggered β‐Hairpin to α‐Helix Transition in a 14‐Residue Peptide from a Choline‐Binding Repeat of the Pneumococcal Autolysin LytA

Choline‐binding modules (CBMs) have a ββ‐solenoid structure composed of choline‐binding repeats (CBR), which consist of a β‐hairpin followed by a short linker. To find minimal peptides that are able to maintain the CBR native structure and to evaluate their remaining choline‐binding ability, we have analysed the third β‐hairpin of the CBM from the pneumococcal LytA autolysin. Circular dichroism and NMR data reveal that this peptide forms a highly stable native‐like β‐hairpin both in aqueous solution and in the presence of trifluoroethanol, but, strikingly, the peptide structure is a stable amphipathic α‐helix in both zwitterionic (dodecylphosphocholine) and anionic (sodium dodecylsulfate) detergent micelles, as well as in small unilamellar vesicles. This β‐hairpin to α‐helix conversion is reversible. Given that the β‐hairpin and α‐helix differ greatly in the distribution of hydrophobic and hydrophilic side chains, we propose that the amphipathicity is a requirement for a peptide structure to interact and to be stable in micelles or lipid vesicles. To our knowledge, this “chameleonic” behaviour is the only described case of a micelle‐induced structural transition between two ordered peptide structures.     

SSThread: Template‐free protein structure prediction by threading pairs of contacting secondary structures followed by assembly of overlapping pairs

Acquiring the three‐dimensional structure of a protein from its amino acid sequence alone, despite a great deal of work and significant progress on the subject, is still an unsolved problem. SSThread, a new template‐free algorithm is described here that consists of making several predictions of contacting pairs of α‐helices and β‐strands derived from a database of experimental structures using a knowledge‐based potential, secondary structure prediction, and contact map prediction followed by assembly of overlapping pair predictions to create an ensemble of core structure predictions whose loops are then predicted. In a set of seven CASP10 targets SSThread outperformed the two leading methods for two targets each. The targets were all β‐strand containing structures and most of them have a high relative contact order which demonstrates the advantages of SSThread. The primary bottlenecks based on sets of 74 and 21 test cases are the pair prediction and loop prediction stages. © 2014 Wiley Periodicals, Inc.     

Improved Stability and Tunable Functionalization of Parallel β‐Sheets via Multicomponent N‐Alkylation of the Turn Moiety

In contrast to the myriad of methods available to produce α‐helices and antiparallel β‐sheets in synthetic peptides, just a few are known for the construction of stable, non‐cyclic parallel β‐sheets. Herein, we report an efficient on‐resin approach for the assembly of parallel β‐sheet peptides in which the N‐alkylated turn moiety enhances the stability and gives access to a variety of functionalizations without modifying the parallel strands. The key synthetic step of this strategy is the multicomponent construction of an N‐alkylated turn using the Ugi reaction on varied isocyano‐resins. This four‐component process assembles the orthogonally protected turn fragment and incorporates handles serving for labeling/conjugation purposes or for reducing peptide aggregation. NMR and circular dichroism analyses confirm the better‐structured and more stable parallel β‐sheets in the N‐alkylated peptides compared to the non‐functionalized variants.     

Physicochemical characterization of α‐chitin, β‐chitin,and γ‐chitin separated from natural resources

We isolated α‐chitin, β‐chitin, and γ‐chitin from natural resources by a chemical method to investigate the crystalline structure of chitin. Its characteristics were identified with Fourier transform infrared (FTIR) and solid‐state cross‐polarization/magic‐angle‐spinning (CP–MAS) ¹³C NMR spectrophotometers. The average molecular weights of α‐chitin, β‐chitin, and γ‐chitin, calculated with the relative viscosity, were about 701, 612, and 524 kDa, respectively. In the FTIR spectra, α‐chitin, β‐chitin, and γ‐chitin showed a doublet, a singlet, and a semidoublet at the amide I band, respectively. The solid‐state CP–MAS ¹³C NMR spectra revealed that α‐chitin was sharply resolved around 73 and 75 ppm and that β‐chitin had a singlet around 74 ppm. For γ‐chitin, two signals appeared around 73 and 75 ppm. From the X‐ray diffraction results, α‐chitin was observed to have four crystalline reflections at 9.6, 19.6, 21.1, and 23.7 by the crystalline structure. Also, β‐chitin was observed to have two crystalline reflections at 9.1 and 20.3 by the crystalline structure. γ‐Chitin, having an antiparallel and parallel structure, was similar in its X‐ray diffraction patterns to α‐chitin. The exothermic peaks of α‐chitin, β‐chitin, and γ‐chitin appeared at 330, 230, and 310, respectively. The thermal decomposition activation energies of α‐chitin, β‐chitin, and γ‐chitin, calculated by thermogravimetric analysis, were 60.56, 58.16, and 59.26 kJ mol^?1, respectively. With the Arrhenius law, ln β was plotted against the reciprocal of the maximum decomposition temperature as a straight line; there was a large slope for large activation energies and a small slope for small activation energies. α‐Chitin with high activation energies was very temperature‐sensitive; β‐Chitin with low activation energies was relatively temperature‐insensitive. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3423–3432, 2004     

Quantum mechanical studies on model α‐pleated sheets

Pauling and Corey proposed a pleated‐sheet configuration, now called α‐sheet, as one of the protein secondary structures in addition to α‐helix and β‐sheet. Recently, it has been suggested that α‐sheet is a common feature of amyloidogenic intermediates. We have investigated the stability of antiparallel β‐sheet and two conformations of α‐sheet in solution phase using the density functional theoretical method. The peptides are modeled as two‐strand acetyl‐(Ala)₂‐N‐methylamine. Using stages of geometry optimization and single point energy calculation at B3LYP/cc‐pVTZ//B3LYP/6‐31G* level and including zero‐point energies, thermal, and entropic contribution, we have found that β‐sheet is the most stable conformation, while the α‐sheet proposed by Pauling and Corey has 13.6 kcal/mol higher free energy than the β‐sheet. The α‐sheet that resembles the structure observed in molecular dynamics simulations of amyloidogenic proteins at low pH becomes distorted after stages of geometry optimization in solution. Whether the α‐sheets with longer chains would be increasingly favorable in water relative to the increase in internal energy of the chain needs further investigation. Different from the quantum mechanics results, AMBER parm94 force field gives small difference in solution phase energy between α‐sheet and β‐sheet. The predicted amide I IR spectra of α‐sheet shows the main band at higher frequency than β‐sheet. © 2009 Wiley Periodicals, Inc. J Comput Chem, 2010     

Acceptor Reactivity in the Total Synthesis of Alginate Fragments Containing α‐L‐Guluronic Acid and β‐D‐Mannuronic Acid

The total synthesis of mixed‐sequence alginate oligosaccharides, featuring both β‐D ‐mannuronic acid (M) and α‐L ‐guluronic acid (G), is reported for the first time. A set of GM, GMG, GMGM, GMGMG, GMGMGM, GMGMGMG, and GMGGMG alginates was assembled using GM building blocks, having a guluronic acid acceptor part and a mannuronic acid donor side to allow the fully stereoselective construction of the cis‐glycosidic linkages. It was found that the nature of the reducing‐end anomeric center, which is ten atoms away from the reacting alcohol group in the key disaccharide acceptor, had a tremendous effect on the efficiency with which the building blocks were united. This chiral center determines the overall shape of the acceptor and it is revealed that the conformational flexibility of the acceptor is an all‐important factor in determining the outcome of a glycosylation reaction.     

Monitoring Backbone Hydrogen‐Bond Formation in β‐Barrel Membrane Protein Folding

β‐barrel membrane proteins are key components of the outer membrane of bacteria, mitochondria and chloroplasts. Their three‐dimensional structure is defined by a network of backbone hydrogen bonds between adjacent β‐strands. Here, we employ hydrogen–deuterium (H/D) exchange in combination with NMR spectroscopy and mass spectrometry to monitor backbone hydrogen bond formation during folding of the outer membrane protein X (OmpX) from E. coli in detergent micelles. Residue‐specific kinetics of interstrand hydrogen‐bond formation were found to be uniform in the entire β‐barrel and synchronized to formation of the tertiary structure. OmpX folding thus propagates via a long‐lived conformational ensemble state in which all backbone amide protons exchange with the solvent and engage in hydrogen bonds only transiently. Stable formation of the entire OmpX hydrogen bond network occurs downhill of the rate‐limiting transition state and thus appears cooperative on the overall folding time scale.     

Total Chemical Synthesis and Biological Activities of Glycosylated and Non‐Glycosylated Forms of the Chemokines CCL1 and Ser‐CCL1

CCL1 is a naturally glycosylated chemokine protein that is secreted by activated T‐cells and acts as a chemoattractant for monocytes. 1 Originally, CCL1 was identified as a 73 amino acid protein having one N‐glycosylation site, 1 and a variant 74 residue non‐glycosylated form, Ser‐CCL1, has also been described. 2 There are no systematic studies of the effect of glycosylation on the biological activities of either CCL1 or Ser‐CCL1. Here we report the total chemical syntheses of both N‐glycosylated and non‐glycosylated forms of (Ser‐)CCL1, by convergent native chemical ligation. We used an N‐glycan isolated from hen egg yolk together with the Nbz linker for Fmoc chemistry solid phase synthesis of the glycopeptide‐^αthioester building block. 3 Chemotaxis assays of these glycoproteins and the corresponding non‐glycosylated proteins were carried out. The results were correlated with the chemical structures of the (glyco)protein molecules. To the best of our knowledge, these are the first investigations of the effect of glycosylation on the chemotactic activity of the chemokine (Ser‐)CCL1 using homogeneous N‐glycosylated protein molecules of defined covalent structure.     

Effect of Anomeric Linkage on the Sialylation of Glycosides by Cells

The synthesis of sialylated glycosides using saccharide primers and cells was investigated. α · and β · Saccharide primers were chemically synthesized and introduced into B16 melanoma cells to prime oligosaccharide synthesis. Incorporation of α‐ and β‐dodecyl lactosides into B16 cells resulted in the sialylation of the galactose residue to give GM3‐type oligosaccharides. The β‐dodecyl galactoside primer was sialylated but the α‐dodecyl galactoside primer was not. Both the α‐ and β‐dodecyl glucoside primers were not elongated. In the glycosylation of primers by cells, this research confirmed that sialyl transferases tolerate acceptor modifications and are permissive to primer elongation regardless of the α‐ or β‐linkage to the aglycon unit. However, the presence of the terminal galactose residue that is β‐linked to the adjacent saccharide or aglycon unit is essential for sialylation by cellular enzymes to occur.     

Structural Transformation of the Peptide Fragments from the Reactive Center Loops of Serpins: Circular Dichroic Studies

Two peptides, derived from the reactive center of ovalbumin (OVARC) and plasminogen activator inhibitor‐1 (PAIRC) respectively were chemically synthesized and investigated by circular dichroic spectroscopy. The secondary structural transformation in solution and in solid state was studied. OVARC shows a nascent helical structure in aqueous solution, and its helical content increases under acidic conditions. There is no obvious structural conversion from solution to solid state. PAIRC, however, undergoes a structural transformation from random coil in aqueous solution to a typical β‐sheet structure in the solid state. Hexafluoroisopropanol (HFIP) prompts helical structures of the two peptides in solution, but it seems to trigger the structural formation of β‐sheets in solid state. The novel structural transformation from random coil or nascent helical structure in aqueous solution to the α‐helix in HFIP and to the β‐sheet structure in solid state may reflect the conformational polymorphism of the serpin reactive centers and is implicated in the structural features of the amyloid aggregates.     

Thioether‐derived Macrocycle for Peptide Secondary Structure Fixation

Recently, we developed methods to stabilize peptides into various secondary structures, including α‐helix, type III turn and β‐hairpin via proper thioether based macrocyclization. These conformationally constrained peptidomimetics confer enhanced biophysical properties and provide a valuable avenue towards clinically‐relevant therapeutic molecules. In this personal account, thioether‐derived macrocyclization methods developed by our group for stabilization of α‐helix, type‐III β turn and β‐hairpin conformations are discussed.     

Stereochemistry and Conformation of Skyllamycin,a Non‐Ribosomally Synthesized Peptide from Streptomyces sp. Acta 2897

Skyllamycin is a non‐ribosomally synthesized cyclic depsipeptide from Streptomyces sp. Acta 2897 that inhibits PDGF‐signaling. The peptide scaffold contains an N‐terminal cinnamoyl moiety, a β‐methylation of aspartic acid, three β‐hydroxylated amino acids and one rarely occurring α‐hydroxy glycine. With the exception of α‐hydroxy glycine, the stereochemistry of the amino acids was assigned by comparison to synthetic reference amino acids applying chiral GC‐MS and Marfey‐HPLC analysis. The stereochemistry of α‐hydroxy glycine, which is unstable under basic and acidic conditions, was determined by conformational analysis, employing a combination of data from NOESY‐NMR spectroscopy, simulated annealing and free MD simulations. The simulation procedures were applied for both R‐ and S‐configured α‐hydroxy glycine of the skyllamycin structure and compared to the NOESY data. Both methods, simulated annealing and free MD simulations independently support S‐configured α‐hydroxy glycine thus enabling the assignment of all stereocenters in the structure of skyllamycin and devising the role of two‐component flavin dependent monooxygenase (Sky39) as S‐selective.     

Boronic Acid Functionalized Core–Satellite Composite Nanoparticles for Advanced Enrichment of Glycopeptides and Glycoproteins

A core–satellite‐structured composite material has been successfully synthesized for capturing glycosylated peptides or proteins. This novel hybrid material is composed of a silica‐coated ferrite “core” and numerous “satellites” of gold nanoparticles with lots of “anchors”. The anchor, 3‐aminophenylboronic acid, designed for capturing target molecules, is highly specific toward glycosylated species. The long organic chains bridging the gold surface and the anchors could reduce the steric hindrance among the bound molecules and suppress nonspecific bindings. Due to the excellent structure of the current material, the trap‐and‐release enrichment of glycosylated samples is quite simple, specific, and effective. Indeed, the composite nanoparticles could be used for enriching glycosylated peptides and proteins with very low concentrations, and the enriched samples can be easily separated from bulk solution by a magnet. By using this strategy, the recovery of glycopeptides and glycoproteins after enrichment were found to be 85.9 and 71.6 % separately, whereas the adsorption capacity of the composite nanoparticles was proven to be more than 79 mg of glycoproteins per gram of the material. Moreover, the new composite nanoparticles were applied to enrich glycosylated proteins from human colorectal cancer tissues for identification of N‐glycosylation sites. In all, 194 unique glycosylation sites mapped to 155 different glycoproteins have been identified, of which 165 sites (85.1 %) were newly identified.     

Palladium‐Catalysed C(sp3)−H Glycosylation for the Synthesis of C‐Alkyl Glycoamino Acids

We have developed a highly efficient and practical approach for palladium‐catalyzed trifluoroacetate‐promoted N‐quinolylcarboxamide‐directed glycosylation of inert β‐C(sp³)?H bonds of N‐phthaloyl α‐amino acids with glycals under mild conditions. For the first time, C(sp³)?H activation for glycosylation was achieved to build C‐alkyl glycosides. This method facilitates the synthesis of various β‐substituted C‐alkyl glycoamino acids and offers a tool for glycopeptide synthesis.