UV‐Induced Disulfide Formation and Reduction for Dynamic Photopatterning

UV‐induced disulfide formation (UV‐DF) and disulfide reduction (UV‐DR) reactions for surface functionalization and dynamic photopatterning are presented. Both photochemical reactions allow for the spatially and temporally controlled, reversible transition between thiol‐ and disulfide‐functionalized surfaces. The dynamic photopatterning strategy was demonstrated by the UV‐induced attachment, exchange, and detachment on thiol‐modified substrates.     

Electrochemical Magnetoimmunosensing Approach for the Sensitive Detection of H9N2 Avian Influenza Virus Particles

A novel electrochemical magnetoimmunosensor for fast and ultrasensitive detection of H9N2 avian influenza virus particles (H9N2 AIV) was designed based on the combination of high‐efficiency immunomagnetic separation, enzyme catalytic amplification, and the biotin–streptavidin system. The reusable, homemade magneto Au electrode (M‐AuE) was designed and used for the direct sensing. Immunocomplex‐coated magnetic beads (IMBs) were easily accumulated on the surface of the M‐AuE to obtain the catalytically reduced electrochemical signal of H₂O₂ after the immunoreaction. The transducer was regenerated through a simple washing procedure, which made it possible to detect all the samples on a single electrode with higher reproducibility. The magnetic‐bead‐based electrochemical immunosensor showed better analytical performance than the planar‐electrode‐based immunosensor with the same sandwich construction. Amounts as low as 10 pg mL^?1 H9N2 AIV could be detected even in samples of chicken dung. This electrochemical magnetoimmunosensor not only provides a simple platform for the detection of the virus with high sensitivity, selectivity, and reproducibility but also shows great potential in the early diagnosis of diseases.     

Single‐gap Microelectrode Functionalized with Single‐walled Carbon Nanotubes and Pbzyme for the Determination of Pb2+

Lead is a highly toxic metal, which can persist in the natural environment and enrich in biological bodies. It can cause many severe diseases in the human body even at extremely low concentration. Here, we developed a new biosensor using single‐walled carbon nanotubes (SWNTs) modified with a specific Pbzyme (Pbzyme/SWNTs/FET) to detect lead ion (Pb²⁺), which can monitor the lead pollution. This biosensor used 3‐aminopropyltriethoxysilane to immobilize SWNTs on the area between the source and the drain of single‐gap microelectrode (FET), and the duplex DNA (Pbzyme) consisted of DNAzyme (GR‐5) and complementary DNA (CS‐DNA) was functionalized with the SWNTs’ surface through a peptide bond. The use of GR‐5 DANzyme and Pb²⁺ to form a stable complex structure to cleave the CS‐DNA can change radically the Pbzyme's structure on the SWNTs’ surface, which will further affect the number of carriers in SNWTs and the conductivity of the Pbzyme/SWNTs/FET. The change in conductivity can be used to evaluate the Pb²⁺ concentration. Under the optimal conditions, the relative resistances presented a positive correlation with the Pb²⁺ concentrations, showing a good linear relationship in the range of 10 pM to 50 nM, where the linear regression equation was y=10.104log [C_Pb]+5.8656, and the detection limit was 7.4 pM. Finally, the biosensor was applied to measure the Pb²⁺ contents in the soil collected from the forest grass green belt and paint, and the results were compared with the results of atomic fluorescence spectrometry.     

检测禽流感H5亚型病毒的阻抗型免疫研究

研制了一种可用于H5亚型禽流感病毒快速检测的阻抗型免疫传感器。通过蛋白A将H5N1表面抗原血凝素(HA)的单克隆抗体固定于金叉指阵列微电极表面,并与待测溶液中的目标抗原H5N1进行免疫反应。在[Fe(CN)6]3"/4"溶液中进行电化学阻抗谱扫描,表征电极的表面修饰及抗原捕获过程。当H5N1病毒浓度在21～26 HA unit/50μL范围时,其浓度的对数值与叉指阵列微电极的电子传递阻抗的变化值呈线性关系,相关系数为0.9885;检出限为20 HA unit/50μL,检测时间为1 h。此传感器特异性好,灵敏度高,可以重复使用,在病原微生物快速检测领域具有良好的应用前景。     

Biometallization‐Based Electrochemical Magnetoimmunosensing Strategy for Avian Influenza A (H7N9) Virus Particle Detection

A highly sensitive electrochemical immunosensor for avian influenza A (H7N9) virus (H7N9 AIV) detection was proposed by using electrochemical magnetoimmunoassay coupled with biometallization and anodic stripping voltammetry. This strategy could accumulate the enzyme‐generated product on the surface of the magneto electrode by means of silver deposition, which amplified the detection signal about 80 times. The use of magnetic beads (MBs) and the magneto electrode could also amplify the detection signal. Furthermore, a bi‐electrode signal transduction system was introduced into this immunosensor, which is also beneficial to the immunoassay. A concentration as low as 0.011 ng mL^?1 of H7N9 AIV could be detected in about 1.5 h with good specificity. This study not only provides a simple and sensitive approach for virus detection but also offers an effective signal enhancement strategy for the development of highly sensitive MB‐based electrochemical immunoassays.     

Effective and Functional Surface Design for Biosensing Applications Based on a Novel Conducting Polymer and PMMA/Clay Nanocomposite

Surface functionalization plays a crucial role in the design of biosensors. For this purpose, a novel functional monomer, 6‐(4,7‐bis(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐5‐yl)‐2H‐benzo[d][1,2,3]triazol‐2‐yl)hexan‐1‐amine (BEDOA‐6), was designed and synthesized. Poly(BEDOA‐6) was utilized as an immobilization matrix for glucose oxidase biosensor construction. Moreover, polymethylmethacrylate (PMMA) layered silicate nanocomposites were prepared by in situ suspension polymerization. Conducting polymer surface was modified with PMMA/clay nanocomposite material and a glucose biosensor was developed. In addition, XPS and SEM were utilized to characterize the surface properties. The biosensor shows a wide linear range between 2.8 µM and 1.2 mM to glucose with a low detection limit of 1.99 µM. Finally, the biosensor was tested on serum samples containing actual human blood. The results were in well‐agreement with a reference method.     

Visible‐Light‐Mediated Remote Aliphatic C−H Functionalizations through a 1,5‐Hydrogen Transfer Cascade

A redox‐neutral, light‐mediated functionalization of unactivated C(sp³)−H bonds via iminyl radicals is presented here. A 1,5‐H transfer followed by the functionalization of a C(sp²)−H bond takes place in aqueous media producing a variety of elaborated fused ketones. Mechanistic investigations have revealed 1,5‐H transfer as the reversible, rate‐determining step in this transformation. Divergent scaffolds are also accessible via C(sp³)−N bond formation upon a careful choice of the reaction additives.     

Immobilization of Xanthine Oxidase on Carbon Nanotubes Through Double Supramolecular Junctions for Biosensor Construction

A novel approach for the noncovalent functionalization of single‐walled carbon nanotubes with enzymes, using a β‐cyclodextrin‐modified pyrene derivative, mono‐6‐ethylenediamino‐(2‐pyrene carboxamido)‐6‐deoxy‐β‐cyclodextrin (Pyr‐βCD), as a molecular bridge for the construction of a supramolecular assembly between the nanotube surface and an adamantane‐modified enzyme, is reported. The Pyr‐βCD derivative was synthesized and its stacking to SWNT through π–π interactions accomplished. The functionalized nanotubes showed low capacity for the nonspecific adsorption of proteins, but were able to immobilize adamantane‐modified xanthine oxidase via host‐guest associations. This double supramolecular junctions‐based approach was employed to modify a glassy carbon electrode with the enzyme/nanotubes complex for designing a biosensor device toward xanthine. The biosensor showed fast electroanalytical response (10 s), high sensitivity (5.9 mA/M cm²) low detection limit (2 µM) and high stability.     

The impact of the modified Poisson–Boltzmann model on protein bound to a lipid coated silicon nanowire field effect transistor biosensor in an electrolyte environment

The aim of this work was to analyse the electrostatic potential profile, various effects of electrolyte concentrations, and the influences of surface charge on a protein bound to a lipid coated Silicon nanowire field effect transistor (Si-NW FET) biosensor by implementing the modified Poisson–Boltzmann (MPB) model. In this work, we modelled a lipid monolayer-coated Si-NW FET for the sensing of proteins, which consisted of variable amounts of aspartic acid. The electrostatic potential profile, protein charge distributions, the response to various electrolyte concentration, and the impacts of various surface charge were studied by implementing the MPB model with the Si-NW FET biosensor. Additionally, a comparison between the use of the MPB and the Poisson–Boltzmann model in studying the effects of various surface charges was carried out. Taken together, it was found that the MPB model showed a higher resolution in studying the Si-NW FET biosensor model when higher concentrations and surface charges were administered.     

A Biosilification Fusion Protein for a ‘Self‐immobilising’ Sarcosine Oxidase Amperometric Enzyme Biosensor

Monomeric sarcosine oxidase (mSOx) fusion with the silaffin peptide, R5, designed previously for easy protein production in low resource areas, was used in a biosilification process to form an enzyme layer electrode biosensor. mSOx is a low activity enzyme (10–20 U/mg) requiring high amounts of enzyme to obtain an amperometric biosensor signal, in the clinically useful range <1 mM sarcosine, especially since the K_m is >10 mM. An amperometric biosensor model was fitted to experimental data to investigate dynamic range. mSOx constructs were designed with 6H (6×histidine) and R5 (silaffin) peptide tags and compared with native mSOx. Glutaraldehyde (GA) cross‐linked proteins retained ～5 % activity for mSOx and mSOx‐6H and only 0.5 % for mSOx‐R5. In contrast R5 catalysed biosilification on (3‐mercaptopropyl) trimethoxysilane (MPTMS) and tetramethyl orthosilicate (TMOS) particles created a ‘self‐immobilisation’ matrix retaining 40 % and 76 % activity respectively. The TMOS matrix produced a thick layer (>500 μm) on a glassy carbon electrode with a mediated current due to sarcosine in the clinical range for sarcosinemia (0–1 mM). The mSOx‐R5 fusion protein was also used to catalyse biosilification in the presence of creatinase and creatininase, entrapping all three enzymes. A mediated GC enzyme linked current was obtained with dynamic range available for creatinine determination of 0.1–2 mM for an enzyme layer ～800 nm.     

Construction and corrosion behaviors of a bilayer superhydrophobic film on copper substrate

A novel bilayer superhydrophobic film was constructed on Cu substrate by a simple multi‐step process. First, (3‐mercaptopropyl) trimethoxysilane (MPTMS) molecules were self‐assembled onto the pre‐etched Cu surface via covalent bonding followed by hydrolysis and condensation, then 1H, 1H, 2H, 2H‐perfluorodecyltrichlorosilane (PFDTS) were grafted onto the resultant hydroxyl terminated surface via the Si‐O‐Si bonding. The so‐prepared sample was defined as Cu‐MPTMS‐PFDTS. The structure and morphology of the samples were characterized by means of contact angle measurement, X‐ray photoelectron spectroscopy and scanning electron microscopy. The corrosion behaviors of the films were evaluated by Tafel plot and electrochemical impedance spectroscopy on an electrochemical work station. The results indicated that the bilayer superhydrophobic film possessed better corrosion protection as compared with the control samples. The superiority of the corrosion protection was mainly ascribed to the following two aspects: the superhydrophobicity and polysiloxane micro‐structures of the Cu‐MPTMS‐PFDTS. Copyright © 2012 John Wiley & Sons, Ltd.     

A new approach to molecular phylogeny of H5N1 avian influenza viruses in Asia

In this article, we introduce a new method to analysis avian influenza virus (AIV) of subtype H5N1 and study the similarity of these sequences. We make a comparison for some nucleic acid sequences of H5N1 AIV in Asia by using the 2D and 3D graphic representation. Comparing these sequences, we structured a phylogenetic tree and discussed the evolutional relationship among these viruses. The sequences analysis shows that there are some obvious traits depending on different areas, periods, and hosts. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

An Amperometric Glucose Biosensor Based on Poly (Pyrrole‐2‐Carboxylic Acid)/Glucose Oxidase Biocomposite

A newly developed amperometric glucose biosensor based on graphite rod (GR) working electrode modified with biocomposite consisting of poly (pyrrole‐2‐carboxylic acid) (PCPy) particles and enzyme glucose oxidase (GOx) was investigated. The PCPy particles were synthesized by chemical oxidative polymerization technique using H₂O₂ as initiator of polymerization reaction and modified covalently with the GOx (PCPy‐GOx) after activation of carboxyl groups located on the particles surface with a mixture of N‐(3‐dimethylaminopropyl)‐N′‐ethylcarbodiimide hydrochloride (EDC) and N‐hydroxysuccinimide (NHS). Then the PCPy‐GOx biocomposite was dispersed in a buffer solution containing a certain amount of bovine serum albumin (BSA). The resulting biocomposite suspension was adsorbed the on GR electrode surface with subsequent solvent airing and chemical cross‐linking of the proteins with glutaraldehyde vapour (GR/PCPy‐GOx). It was determined that the current response of the GR/PCPy‐GOx electrodes to glucose measured at +300 mV vs Cl reference electrode was influenced by the duration of the PCPy particles synthesis, pH of the GOx solution used for the PCPy particles modification and the amount of immobilized PCPy‐GOx biocomposite. An optimal pH of buffer solution for operation of the biosensor was found to be 8.0. Detection limit was determined as 0.039 mmol L⁻¹ according signal to noise ratio (S/N: 3). The proposed glucose biosensor was tested in human serum samples.     

Functionalization of Two‐Dimensional MoS2: On the Reaction Between MoS2 and Organic Thiols

Two‐dimensional layered transition metal dichalcogenides (TMDs) have attracted great interest owing to their unique properties and a wide array of potential applications. However, due to their inert nature, pristine TMDs are very challenging to functionalize. We demonstrate a general route to functionalize exfoliated 2H‐MoS₂ with cysteine. Critically, MoS₂ was found to be facilitating the oxidation of the thiol cysteine to the disulfide cystine during functionalization. The resulting cystine was physisorbed on MoS₂ rather than coordinated as a thiol (cysteine) filling S‐vacancies in the 2H‐MoS₂ surface, as originally conceived. These observations were found to be true for other organic thiols and indeed other TMDs. Our findings suggest that functionalization of two‐dimensional MoS₂ using organic thiols may not yield covalently or datively tethered functionalities, rather, in this instance, they yield physisorbed disulfides that are easily removed.     

Facile synthesis and responsive behavior of PDMS‐b‐PEG diblock copolymer brushes via photoinitiated “thiol‐ene” click reaction

We present herein a mild and rapid method to create diblock copolymer brushes on a silicon surface via photoinitiated “thiol‐ene” click reaction. The silicon surface was modified with 3‐mercaptopropyltrimethoxysilane (MPTMS) self‐assembled monolayer. Then, a mixture of divinyl‐terminated polydimethylsiloxane (PDMS) and photoinitiator was spin‐coated on the MPTMS surface and exposed to UV‐light. Thereafter, a mixture of thiol‐terminated polyethylene glycol (PEG) and photoinitiator were spin‐coated on the vinyl‐terminated PDMS‐treated surface, and the sequent photopolymerization was carried out under UV‐irradiation. The MPTMS, PDMS, and PEG layers were carefully identified by X‐ray photoelectron spectroscopy, atomic force microscopy, ellipsometry, and water contact angle measurements. The thickness of the polydimethylsiloxane‐block‐poly(ethylene glycol) (PDMS‐b‐PEG) diblock copolymer brush could be controlled by the irradiation time. The responsive behavior of diblock copolymer brushes treated in different solvents was also discussed. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Hybridization biosensor using 2,9-dimethyl-1,10-phenantroline cobalt as electrochemical indicator for detection of hepatitis B virus DNA

A label-free biosensor for the detection of oligonucleotides related to hepatitis B virus sequence via the interactions of DNA with redox-active complex, 2,9-dimethyl-1,10-phenantroline cobalt [Co(dmp)(H2O)(NO3)2] is described. The study was carried out by the hybridization of 21-mer probe DNA modified on glassy carbon electrode (GCE) with target DNA, and [Co(dmp)(H2O)(NO3)2] whose sizes are comparable to those of the small groove of native double-helix DNA was used as an electrochemical indicator. Electrochemical detection was performed by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) over the potential range where the [Co(dmp)(H2O)(NO3)2] was active. Under the optimum conditions, the electrical signal had a linear relationship with the concentration of target DNA ranging from 3.96 x 10(-7) to 1.32 x 10(-6) M, and the detection limit was 1.94 x 10(-8) M (S/N=3). The biosensor has good selectivity by detecting the three-base mismatch sequence ssDNA.     

Application of Different Zeolites for Improvement of the Characteristics of a pH‐FET Biosensor Based on Immobilized Urease

Different modifications of the zeolites Na⁺‐Beta and LTA were applied for improving the working characteristics of a urea biosensor. The bioselective membrane of the biosensor was based on urease and different zeolites co‐immobilized with bovine serum albumin on the surface of a pH‐FET. It was shown that the biosensors modified with the zeolites H⁺‐Beta30 and H⁺‐Beta50 are characterized by increased sensitivity to urea. The influence of the zeolite concentration on the sensitivity of the biosensors was studied. The optimal concentration of the zeolites H⁺‐Beta30 and H⁺‐Beta50 in the bioselective membrane was 15 %. Different variants of co‐immobilization of urease and zeolite H⁺‐Beta30 were studied and the optimal method was selected. Thus, a general conclusion is that the urea biosensor sensitivity can be improved using zeolite H⁺‐Beta30 for urease immobilization in the bioselective membrane.     

Development of Quercetin Biosensor Through Immobilizing Laccase in a Modified β‐Cyclodextrin Matrix Containing Ag Nanoparticles in Ionic Liquid

A biosensor containing Ag nanoparticles in ionic liquid (IL) 1‐butyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide (BMI.Tf₂N) and laccase (Lac) immobilized on β‐cyclodextrin modified with epichlorohydrin (β‐CDEpi) was developed for quercetin determination. Lac catalyses the oxidation of quercetin to quinone, which is then reduced on the biosensor surface and the resulting current was investigated by square‐wave voltammetry. The β‐CDEpi support was analyzed by scanning electron microscopy and Ag‐BMI.Tf₂N by transmission electron microscopy and X‐ray diffraction. The linear range (0.499–7.407 μM) and low detection limit (0.037±0.004 μM) show that the proposed biosensor is suitable for quercetin determination in real samples.     

Cyclodextrin‐Modified Zeolites: Host–Guest Surface Chemistry for the Construction of Multifunctional Nanocontainers

The functionalization of nanoporous zeolite L crystals with β‐cyclodextrin (CD) has been demonstrated. The zeolite surface was first modified with amino groups by using two different aminoalkoxysilanes. Then, 1,4‐phenylene diisothiocyanate was reacted with the amino monolayer and used to bind CD heptamine by using its remaining isothiocyanate groups. The use of the different aminoalkoxysilanes, 3‐aminopropyl dimethylethoxysilane (APDMES) and 3‐aminopropyl triethoxysilane (APTES), led to drastic differences in uptake and release properties. Thionine was found to be absorbed and released from amino‐ and CD‐functionalized zeolites when APDMES was used, whereas functionalization by APTES led to complete blockage of the zeolite channels. Fluorescence microscopy showed that the CD groups covalently attached to the zeolite crystals could bind adamantyl‐modified dyes in a specific and reversible manner. This strategy allowed the specific immobilization of His‐tagged proteins by using combined host–guest and His‐tag‐Ni‐nitrilotriacetic acid (NTA) coordination chemistry. Such multifunctional systems have the potential for encapsulation of drug molecules inside the zeolite pores and non‐covalent attachment of other (for example, targeting) ligand molecules on its surface.