Synthesis and Photophysical Properties of 1,1,4,4-Tetracyanobutadienes Derived from Ynamides Bearing Fluorophores**

1,1,4,4-Tetracyanobutadienes (TCBDs) bearing a large diversity of fluorophores were prepared following a multi-step synthesis. In a crucial last step, all compounds were obtained from the corresponding ynamides, which were particularly suitable for the formation of the TCBDs in the presence of tetracyanoethylene via a [2+2] cycloaddition/retroelectrocyclization step (CA-RE). Several fluorenyl derivatives in addition to phenanthrenyl and terphenyl ones provided ynamide-based TCBDs affording remarkable emission properties covering a large range of wavelengths. Those compounds emit both in solid state and in solution from the visible region to the NIR range, depending on the molecular structures. Quantum yields in cyclohexane reached unforeseen values for such derivatives, up to 7.8 %. A huge sensitivity to the environment of the TCBDs has also been unraveled for most of the compounds since we observed a dramatic fall of the quantum yields when changing the solvent from cyclohexane to toluene, while they are almost non-emissive in dichloromethane.     

Copper‐Catalyzed Aminothiolation of 1,3‐Dienes via a Dihydrothiazine Intermediate

Heteroatom‐containing organic molecules are of particular interest to medicinal chemists and materials scientists. A strategy to reach these architectures via direct difunctionalization of abundant 1,3‐dienes is especially attractive. Herein, we describe the development of a regio‐ and diastereoselective 1,4‐aminothiolation of 1,3‐dienes with a sulfur diimide reagent, a copper catalyst, and alkyl Grignard reagents. This unique protocol provides remote nitrogen and sulfur functionalities with high levels of stereocontrol. The reaction proceeds via a tandem hetero‐Diels–Alder cycloaddition of N,N′‐bis(benzenesulfonyl)sulfur diimide with 1,3‐diene followed by copper‐catalyzed Grignard substitution. Mechanistic studies support a copper catalyzed formation of an unprecedented [10‐S‐4] sulfurane that reductively eliminates to afford a 3,6‐dihydrothiazine, which is selectively converted to 1,4‐aminothiols.     

A Series of Isolable Silanoic Thio‐, Seleno‐, and Telluroesters (LSi(X)OR) with Donor‐Supported SiX Double Bonds (L=β‐Diketiminate; X=S,Se, Te)

The first silicon analogues of carbonic (carboxylic) esters, the silanoic thio‐, seleno‐, and tellurosilylesters 3 (Si?S), 4 (Si?Se), and 5 (Si?Te), were prepared and isolated in crystalline form in high yield. These thermally robust compounds are easily accessible by direct reaction of the stable siloxysilylene L(Si:)OSi(H)L′ 2 (L=HC(CMe)₂[N(aryl)₂], L′=CH[(C?CH₂)‐CMe][N(aryl)]₂; aryl=2,6‐iPr₂C₆H₃) with the respective elemental chalcogen. The novel compounds were fully characterized by methods including multinuclear NMR spectroscopy and single‐crystal X‐ray diffraction analysis. Owing to intramolecular N→Si donor–acceptor support of the Si?X moieties (X=S, Se, Te), these compounds have a classical valence‐bond N⁺–Si–X^? resonance betaine structure. At the same time, they also display a relatively strong nonclassical Si?X π‐bonding interaction between the chalcogen lone‐pair electrons (n_π donor orbitals) and two antibonding Si? N orbitals (σ*_π acceptor orbitals mainly located at silicon), which was shown by IR and UV/Vis spectroscopy. Accordingly, the Si?X bonds in the chalcogenoesters are 7.4 ( 3 ), 6.7 ( 4 ), and 6.9 % ( 5 ) shorter than the corresponding Si? X single bonds and, thus, only a little longer than those in electronically less disturbed Si?X systems (“heavier” ketones).     

An Efficient and Convenient Synthesis of Ethyl 1‐(4‐Methoxyphenyl)‐5‐phenyl‐1H‐1,2,3‐triazole‐4‐carboxylate

The “click chemistry” of using organic azides and terminal alkynes is arguably the most efficient and straightforward route to the synthesis of 1,2,3‐triazoles. In this paper, an alternative and direct access to ethyl 1‐(4‐methoxyphenyl)‐5‐phenyl‐1H‐1,2,3‐triazole‐4‐carboxylate is described. Treatment of ethyl diazoacetate with 4‐methoxyaniline derived aryl imines in the presence of 1,8‐diazabicyclo[5.4.0]undec‐7‐ene provided fully substituted 1,2,3‐triazoles in good to high chemical yields. The base‐mediated reaction tolerates various substituted phenyl imines as well as ethyl diazoacetate or the more bulky diazoacetamide. A reasonable mechanism is proposed that involves the addition of an imine nitrogen atom to the terminal nitrogen atom of the diazo compound, followed by aromatization to give the 1,2,3‐triazole. The presence of the 4‐carboxy group is advantageous as it can be easily transformed into other functional groups.     

Synthesis of 5‐Acyl‐2‐Amino‐3‐Cyanothiophenes: Chemistry and Fluorescent Properties

Independent of the substrate structure and reaction conditions, 3‐amino‐2‐cyanothioacrylamides, which contain two active electrophilic centers, were shown to interact with various active halo methylene compounds under mild conditions to afford 5‐acyl‐2‐amino‐3‐cyanothiophenes as the only products. A series of new polyfunctional thiophene derivatives with a rare combination of functionalities were synthesized, and their photophysical properties were experimentally and computationally investigated. The calculated electronic characteristics of the ground and excited states were compared to the experimental results, which provided a good understanding of the relationship between the optoelectronic properties and the molecular structures. After absorption of light quanta, the systems populate an intramolecular charge‐transfer (ICT) Franck–Condon state, and emission occurs from a twisted ICT minimum.     

Synthesis,Crystal Structure,and Photophysical Properties of (1E,3E,5E)‐1,3,4,6‐Tetraarylhexa‐1,3,5‐trienes: A New Class of Fluorophores Exhibiting Aggregation‐Induced Emission

Double Horner–Wadsworth–Emmons reaction of (E)‐2,3‐diaryl‐1,4‐bis(diethylphosphonyl)but‐2‐ene with (p‐substituted) benzaldehydes gave (1E,3E,5E)‐1,3,4,6‐tetraarylhexa‐1,3,5‐trienes in moderate to good yields. Substitution of electron‐withdrawing or ‐donating groups at the para position of the 1,6‐diphenyl groups induced a slight bathochromic shift of UV spectra measured in CHCl₃ compared with that of the parent 1,3,4,6‐tetraphenylhexa‐1,3,5‐triene. Although fluorescence was not observed with all the trienes in CHCl₃, they markedly emitted visible light in powder forms with quantum yields of 0.15–0.44. Introduction of amino groups at the para position of the 3,4‐diphenyl groups induced a bathochromic shift of emission maxima with good solid‐state quantum yields. Thus, the tetraarylated triene framework is found to serve as a new class of fluorophores that exhibit aggregation‐induced emission.     

A Convenient Synthesis of 1,2,4‐ and 1,3,4‐Azadiphospholes

A new synthetic route to functionalized neutral and anionic azadiphospholes from easily accessible starting materials is described. Equimolar reaction of Na(OCP) and N‐(2,6‐dimethylphenyl)pivalimidoyl chloride 2 a cleanly affords the imidoxy‐functionalized 1,2,4‐azadiphosphole 3 a . Using Na(OCP) and imidoyl chloride in a 2:1 ratio leads to an anionic four‐membered ring Na[ 4 a ], which has been structurally characterized. During 16 h at room temperature, Na[ 4 a ] rearranges to the anionic 1,3,4‐azadiphospholide Na[ 5 a ] with release of carbon monoxide. Applying the more sterically demanding N‐(2,6‐diisopropylphenyl)pivalimidoyl chloride allows isolation of the 1,3,4‐azadiphospholide Na[ 5 b ] in good yield (>70 %). Possible mechanisms leading to the new isomeric azadiphospholides have been investigated with the aid of high‐level composite calculations.     

Borylated Arylisoquinolines: Photophysical Properties and Switching Behavior of Promising Tunable Fluorophores

A series of nine borylated arylisoquinolines has been prepared with systematic variation in their electronic properties and their photophysical properties were investigated. The color of their fluorescence can be finely tuned by changing the properties of the aryl moiety, which is involved in internal‐charge‐transfer processes. For example, methoxy‐substituted compound 5 showed an intense green emission, whereas dimethylamino‐substituted compound 6 showed an orange‐red emission. These new fluorophores were tested for their potential as molecular switches with external ionic stimuli, such as protons and fluoride ions. On the one hand, protonation of the isoquinoline moiety led to fluorescence enhancement for compounds that showed weak charge transfer and fluorescence quenching for compounds that showed strong charge transfer. On the other hand, the formation of ate complexes with fluoride led to strong fluorescence quenching in all of the investigated cases.     

Synthesis and Photophysical Properties of C60‐carbazole Adducts

Three C₆₀‐carbazole adducts have been synthesized by 1, 3‐dipolar cycloaddition reaction. Intramolecular energy/electron transfer from carbazole to C₆₀ was observed by steady‐state absorption and fluorescence spectra. The fluorescence spectra of these adducts were similar to each other and dependent on the excitation wavelength and solvent.     

Synthesis and Photophysics of Core‐Substituted Naphthalene Diimides: Fluorophores for Single Molecule Applications

The synthesis and photophysics of two new aminopropenyl naphthalene diimide (SANDI) dyes are reported. A general and convenient method for the synthesis of the precursor mono‐, di‐, and tetrabrominated 1,4,5,8‐naphthalene tetracarboxylic dianhydrides is described. The two core‐substituted SANDIs exhibit many of the photophysical properties required for fluorescence labeling applications including high photostability and high fluorescence quantum yields (>0.5) in the visible region of the spectrum. The emission wavelength is sensitive to the number of substituents on the NDI core, and the fluorescence decay times are in the range of ～8–12 ns for both compounds in the solvents investigated. Preliminary fluorescence emission data from single molecules of the compounds embedded in poly(methyl methacrylate) films are also reported and show that single molecules have very low yields of photobleaching, particularly the di‐substituted system. Furthermore, only a small proportion (<10 %) of the single molecules studied display fluorescence intermittencies or “blinks” in their photon trajectory. The compounds appear to be excellent candidates for applications at the single molecule level, for example, as FRET labels.     

Synthesis and Photophysical Properties of α-(N-Biphenyl)-Substituted 2,2′-Bipyridine-Based Push–Pull Fluorophores

A series of new α-(N-biphenyl)-substituted 2,2′-bipyridines were obtained through the combination of the ipso-nucleophilic aromatic substitution of the C5-cyano group, aza-Diels–Alder and Suzuki cross-coupling reactions, starting from 5-cyano-1,2,4-triazines. For the obtained compounds, photophysical and fluorosolvatochromic properties were studied. Fluorophores 3l and 3b demonstrated unexpected AIEE activity, while 3a and 3h showed promising nitroexplosive detection abilities.     

Gold‐Catalyzed [2+2+1] Cycloaddition of 1,6‐Diyne Carbonates and Esters with Aldehydes to 4‐(Cyclohexa‐1,3‐dienyl)‐1,3‐dioxolanes

A synthetic method to stereoselectively prepare 4‐(cyclohexa‐1,3‐dienyl)‐1,3‐dioxolanes in good to excellent yields by gold(I)‐catalyzed [2+2+1] cycloaddition of 1,6‐diyne carbonates and esters with aldehydes is described. The cascade process involves 1,2‐acyloxy migration followed by cyclopropenation and cycloreversion. This leads to an unprecedented [2+2+1] cycloaddition of the resulting alkenylgold carbenoid species, examples of which are extremely rare, with two aldehyde molecules at catalyst loadings as low as 1 mol %. The usefulness of this cycloisomerization chemistry was further demonstrated by the transformation of one example to the corresponding phenol.     

Carbonate Linkage Bearing Naphthalenediimides: Self‐Assembly and Photophysical Properties

Self‐assembly of carbonate linkage bearing naphthalene diimides (NDI) showed unusually red‐shifted excimer emission at approximately 560 nm. On the other hand, the ether linkers showed usual excimers at around 520 nm, highlighting the role of the carbonate group in tuning the molecular organization and the resultant photophysical properties of NDI.