Click mechanochemistry: quantitative synthesis of "ready to use" chiral organocatalysts by efficient two-fold thiourea coupling to vicinal diamines

Mechanochemical methods of neat grinding and liquid-assisted grinding have been applied to the synthesis of mono- and bis(thiourea)s by using the click coupling of aromatic and aliphatic diamines with aromatic isothiocyanates. The ability to modify the reaction conditions allowed the optimization of each reaction, leading to the quantitative formation of chiral bis(thiourea)s with known uses as organocatalysts or anion sensors. Quantitative reaction yields, combined with the fact that mechanochemical reaction conditions avoid the use of bulk solvents, enabled solution-based purification methods (such as chromatography or recrystallization) to be completely avoided. Importantly, by using selected model reactions, we also show that the described mechanochemical reaction procedures can be readily scaled up to at least the one-gram scale. In that way, mechanochemical synthesis provides a facile method to fully transform valuable enantiomerically pure reagents into useful products that can immediately be applied in their designed purpose. This was demonstrated by using some of the mechanochemically prepared reagents as organocatalysts in a model Morita-Baylis-Hillman reaction and as cyanide ion sensors in organic solvents. The use of electronically and sterically hindered ortho-phenylenediamine revealed that mechanochemical reaction conditions can be readily optimized to form either the 1:1 or the 1:2 click-coupling product, demonstrating that reaction stoichiometry can be more efficiently controlled under these conditions than in solution-based syntheses. In this way, it was shown that excellent stoichiometric control by mechanochemistry, previously established for mechanochemical syntheses of cocrystals and coordination polymers, can also be achieved in the context of covalent-bond formation.     

SuFEx‐Based Synthesis of Polysulfates

High‐molecular‐weight polysulfates are readily formed from aromatic bis(silyl ethers) and bis(fluorosulfates) in the presence of a base catalyst. The reaction is fast and proceeds well under neat conditions or in solvents, such as dimethyl formamide or N‐methylpyrrolidone, to provide the desired polymers in nearly quantitative yield. These polymers are more resistant to chemical degradation than their polycarbonate analogues and exhibit excellent mechanical, optical, and oxygen‐barrier properties.     

First mechanosynthesis of piperlotines A,C, and derivatives through solvent-free Horner–Wadsworth–Emmons reaction

Piperlotines are natural products characterized by an α,β-unsaturated amide moiety. These compounds found wide applications in Medicinal Chemistry like antibacterials, cytotoxic agents, anticoagulants, among others. To date, diverse methods of synthesis have been reported for piperlotines, but involving the use of catalysts, hazard reagents, anhydrous media or coupling reagents. Thus, in this work, we developed a greener method of synthesis of piperlotines A, C, and derivatives, through mechanochemical activation under solvent-free conditions. The reaction of a β-amidophosphonate, K₂CO₃, and an aromatic aldehyde afforded target compounds in moderate to good yields (46–77%), in an open atmosphere by grinding. It is worth to mention that this mechanochemical process was under thermodynamic control because just E isomer was isolated for every reaction. Moreover, synthesized piperlotines have been predicted by means of chemoinformatic analysis as potential therapeutic agents for the treatment of arthritis or cancer.     

Click Ionic Liquids: A Family of Promising Tunable Solvents and Application in Suzuki–Miyaura Cross‐Coupling

A series of click ionic salts 4 a – 4 n was prepared through click reaction of organic azides with alkyne‐functionalized imidazolium or 2‐methylimidazolium salts, followed by metathesis with lithium bis(trifluoromethanesulfonyl)amide or potassium hexafluorophosphate. All salts were characterized by IR, NMR, TGA, and DSC, and most of them can be classified as ionic liquids. Their steric and electronic properties can be easily tuned and modified through variation of the aromatic or aliphatic substituents at the imidazolium and/or triazolyl rings. The effect of anions and substituents at the two rings on the physicochemical properties was investigated. The charge and orbital distributions based on the optimized structures of cations in the salts were calculated. Reaction of 4 a with PdCl₂ produced mononuclear click complex 4 a‐Pd , the structure of which was confirmed by single‐crystal X‐ray diffraction analysis. Suzuki–Miyaura cross‐coupling shows good catalytic stability and high recyclability in the presence of PdCl₂ in 4 a . TEM and XPS analyses show formation of palladium nanoparticles after the reaction. The palladium NPs in 4 a are immobilized by the synergetic effect of coordination and electrostatic interactions with 1,2,3‐triazolyl and imidazolium, respectively.     

Circular DNA by “Bis‐Click” Ligation: Template‐Independent Intramolecular Circularization of Oligonucleotides with Terminal Alkynyl Groups Utilizing Bifunctional Azides

A highly effective and convenient “bis‐click” strategy was developed for the template‐independent circularization of single‐stranded oligonucleotides by employing copper(I)‐assisted azide–alkyne cycloaddition. Terminal triple bonds were incorporated at both ends of linear oligonucleotides. Alkynylated 7‐deaza‐2′‐deoxyadenosine and 2′‐deoxyuridine residues with different side chains were used in solid‐phase synthesis with phosphoramidite chemistry. The bis‐click ligation of linear 9‐ to 36‐mer oligonucleotides with 1,4‐bis(azidomethyl)benzene afforded circular DNA in a simple and selective way; azido modification of the oligonucleotide was not necessary. Short ethynyl side chains were compatible with the circularization of longer oligonucleotides, whereas octadiynyl residues were used for short 9‐mers. Compared with linear duplexes, circular bis‐click constructs exhibit a significantly increased duplex stability over their linear counterparts. The intramolecular bis‐click ligation protocol is not limited to DNA, but may also be suitable for the construction of other macrocycles, such as circular RNAs, peptides, or polysaccharides.     

A “click” approach to ROMP block copolymers

Amphiphilic block copolymers can be conveniently prepared via convergent syntheses, allowing each individual polymer block to be prepared via the polymerization technique that gives the best architectural control. The convergent “click‐chemistry” route presented here, gives access to amphiphilic diblock copolymers prepared from a ring opening metathesis polymer and polyethylene glycol. Because of the high functional group tolerance of ruthenium carbene initiators, highly functional ring opening metathesis polymerization (ROMP) polymer blocks can be prepared. The described synthetic route allows the conjugation of these polymer blocks with other end‐functional polymers to give well‐defined and highly functional amphiphilic diblock copolymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2913–2921, 2008     

How good is CuAAC “click” chemistry for polymer coupling reactions?

¹H NMR and SEC analyses are used to investigate the overall efficiency of Copper Catalyzed Azide Alkyne Cycloaddition (CuAAC) “click” coupling reactions between alkyne‐ and azide‐terminated polymers using polystyrene as a model. Quantitative convolution modeling of the entire molecular weight distribution is applied to characterize the outcomes of the functional polymer synthesis reactions (i.e., by atom transfer radical polymerization), as well as the CuAAC coupling reaction. Incomplete functionality of the azide‐terminated polystyrene (∼92%) proves to be the largest factor compromising the efficacy of the CuAAC coupling reaction and is attributed primarily to the loss of terminal bromide functionality during its synthesis. The efficiency of the S_N2 reaction converting bromide to azide was found to be about 99%. After taking into account the influence of non‐functional polymer, we find that, under the reaction conditions used, the efficiency of the CuAAC coupling reaction determined from both techniques is about 94%. These inefficiencies compromise the fidelity and potential utility of CuAAC coupling reactions for the synthesis of hierarchically structured polymers. While CuAAC efficiency is expected to depend on the specific reaction conditions used, the framework described for determining reaction efficiency does provide a means for ultimately optimizing the reaction conditions for CuAAC coupling reactions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 75–84     

Mechanochemical Suzuki-Miyaura Cross-Coupling with Natural Deep Eutectic Solvent as Liquid-Assisted Grinding Additive: Merging Two Fields for a Greener Strategy

The use of volatile solvents for organic synthesis is nowadays questioned due to their negative impact on the environnement. To develop sustainable and environmentally friendly methodologies, we propose to combine two green chemistry concepts: the use of bioinspired solvents: natural deep eutectic solvents (NaDES), and mechanochemistry. Using the Suzuki-Miyaura coupling as a model reaction, we described an efficient mechanochemical method with NaDES as a LAG (liquid-assisted grinding) additive with short reaction times and without any ligand or additional heating. A mechanochemical extraction was also used to reduce the amounts of extraction solvents and the total time of the synthesis process.     

Syntheses of Thiazole‐Containing Macroheterocycles Related to Porphycene

The syntheses of 2,2′‐bithiazole‐containing and related expanded macrocycles 13 – 16 were accomplished by the McMurry coupling reaction of the corresponding [2,2′‐bithiazole]‐5,5′‐dicarbaldehyde 6c and 2,2′‐(1,4‐phenylene)bis[thiazole‐5‐carbaldehyde] 7 , readily available by a two‐step reaction sequence. The success of the dimerization strongly depends on the steric repulsion of the substituents vicinal to the CHO group.     

Polymer end group modifications and polymer conjugations via “click” chemistry employing microreactor technology

This study presents the development of microreactor protocols for the successful continuous flow end group modification of atom transfer radical polymerization precursor polymers into azide end‐capped materials and the subsequent copper‐catalyzed azide alkyne click reactions with alkyne polymers, in flow. By using a microreactor, the reaction speed of the azidation of poly(butyl acrylate), poly(methyl acrylate), and polystyrene can be accelerated from hours to seconds and full end group conversion is obtained. Subsequently, copper‐catalyzed click reactions are executed in a flow reactor at 80 °C. Good coupling efficiencies are observed and various block copolymer combinations are prepared. Furthermore, the flow reaction can be carried out in only 40 min, while a batch procedure takes several hours to reach completion. The results indicate that the use of a continuous flow reactor for end group modifications as well as click reactions has clear benefits towards the development and improvement of well‐defined polymer materials. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1263–1274     

Highly Enantioselective Intramolecular Morita‐Baylis‐Hillman Reaction Catalyzed by Mannose‐Based Thiourea‐phosphine

The saccharide‐based chiral bifunctional thiourea‐phosphines were developed as chiral organocatalysts for the intramolecular Morita‐Baylis‐Hillman reaction of ω‐formyl‐enones. With only 2 mol% of thiourea‐phosphine catalyst 3c , chiral functionalized cyclohexenes were achieved under mild reaction conditions with excellent yields and enantioselectivities.     

Sequential One‐Pot Addition of Excess Aryl‐Grignard Reagents and Electrophiles to O‐Alkyl Thioformates

The sequential addition of aromatic Grignard reagents to O‐alkyl thioformates proceeded to completion within 30 s to give aryl benzylic sulfanes in good yields. This reaction may begin with the nucleophilic attack of the Grignard reagent onto the carbon atom of the O‐alkyl thioformates, followed by the elimination of ROMgBr to generate aromatic thioaldehydes, which then react with a second molecule of the Grignard reagent at the sulfur atom to form arylsulfanyl benzylic Grignard reagents. To confirm the generation of aromatic thioaldehydes, the reaction between O‐alkyl thioformates and phenyl Grignard reagent was carried out in the presence of cyclopentadiene. As a result, hetero‐Diels–Alder adducts of the thioaldehyde and the diene were formed. The treatment of a mixture of the thioformate and phenyl Grignard reagent with iodine gave 1,2‐bis(phenylsulfanyl)‐1,2‐diphenyl ethane as a product, which indicated the formation of arylsulfanyl benzylic Grignard reagents in the reaction mixture. When electrophiles were added to the Grignard reagents that were generated in situ, four‐component coupling products, that is, O‐alkyl thioformates, two molecules of Grignard reagents, and electrophiles, were obtained in moderate‐to‐good yields. The use of silyl chloride or allylic bromides gave the adducts within 5 min, whereas the reaction with benzylic halides required more than 30 min. The addition to carbonyl compounds was complete within 1 min and the use of lithium bromide as an additive enhanced the yields of the four‐component coupling products. Finally, oxiranes and imines also participated in the coupling reaction.     

Reprogramming Nonribosomal Peptide Synthetases for “Clickable” Amino Acids

Nonribosomal peptide synthetases (NRPSs) are multifunctional enzymes that produce a wide array of bioactive peptides. Here we show that a single tryptophan‐to‐serine mutation in phenylalanine‐specific NRPS adenylation domains enables the efficient activation of non‐natural aromatic amino acids functionalized with azide and alkyne groups. The resulting 10⁵‐fold switch in substrate specificity was achieved without appreciable loss of catalytic efficiency. Moreover, the effective communication of the modified A domains with downstream modules in dipeptide synthetases permitted incorporation of O‐propargyl‐L ‐tyrosine into diketopiperazines both in vitro and in vivo, even in the presence of competing phenylalanine. Because azides and alkynes readily undergo bioorthogonal click reactions, reprogramming NRPSs to accept non‐natural amino acids that contain these groups provides a potentially powerful means of isolating, labeling, and modifying biologically active peptides.     

Toward a Greener World—Cyclodextrin Derivatization by Mechanochemistry

Cyclodextrin (CD) derivatives are a challenge, mainly due to solubility problems. In many cases, the synthesis of CD derivatives requires high-boiling solvents, whereas the product isolation from the aqueous methods often requires energy-intensive processes. Complex formation faces similar challenges in that it involves interacting materials with conflicting properties. However, many authors also refer to the formation of non-covalent bonds, such as the formation of inclusion complexes or metal–organic networks, as reactions or synthesis, which makes it difficult to classify the technical papers. In many cases, the solubility of both the starting material and the product in the same solvent differs significantly. The sweetest point of mechanochemistry is the reduced demand or complete elimination of solvents from the synthesis. The lack of solvents can make syntheses more economical and greener. The limited molecular movements in solid-state allow the preparation of CD derivatives, which are difficult to produce under solvent reaction conditions. A mechanochemical reaction generally has a higher reagent utilization rate. When the reaction yields a good guest co-product, solvent-free conditions can be slower than in solution conditions. Regioselective syntheses of per-6-amino and alkylthio-CD derivatives or insoluble cyclodextrin polymers and nanosponges are good examples of what a greener technology can offer through solvent-free reaction conditions. In the case of thiolated CD derivatives, the absence of solvents results in significant suppression of the thiol group oxidation, too. The insoluble polymer synthesis is also more efficient when using the same molar ratio of the reagents as the solution reaction. Solid reactants not only reduce the chance of hydrolysis of multifunctional reactants or side reactions, but the spatial proximity of macrocycles also reduces the length of the spacing formed by the crosslinker. The structure of insoluble polymers of the mechanochemical reactions generally is more compact, with fewer and shorter hydrophilic arms than the products of the solution reactions.     

Synthesis of anionic carbosilane dendrimers via “click chemistry” and their antiviral properties against HIV

The synthesis and characterization of four families of anionic carbosilane dendrimers bearing carboxylate, phosphonate, naphthylsulfonate, and sulfate terminal groups prepared by cycloaddition of azide–alkyne catalyzed by copper (CuAAC) are presented here. For the preparation of these anionic carbosilane dendrimers, two strategies starting from azide‐terminated carbosilane dendrimers were followed: (i) click coupling of neutral alkynes followed by derivatization into anionic moieties or (ii) click coupling of anionic alkynes. Both strategies require different reaction conditions in order to accommodate the different substrate polarities. These anionic dendrimers, in general, do not present cell toxicity in vitro until concentration up to 20 µM. Therefore, they can be used in inhibition experiments in concentrations below this limit. We have observed that dendrimers bearing phosphonate groups possess poor anti‐HIV capabilities in vitro in PBMCs, while carboxylate dendrimers can reduce HIV infection levels moderately. On the other hand, sulfate and naphthylsulfonate dendrimers are powerful anti‐HIV agents and their antiviral activity is generation and concentration dependent. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1099–1112     

Organocatalytic Asymmetric Friedel–Crafts Reaction of Sesamol with Isatins: Access to Biologically Relevant 3‐Aryl‐3‐hydroxy‐2‐oxindoles

The Friedel–Crafts reaction of electron‐rich phenols with isatins was developed by employing bifunctional thiourea–tertiary amine organocatalysts. Cinchona alkaloid derived thiourea epiCDT‐ 3 a efficiently catalyzed the Friedel–Crafts‐type addition of phenols to isatin derivatives to provide 3‐aryl‐3‐hydroxy‐2‐oxindoles 7 and 9 in good yield (80–95 %) with good enantiomeric excess (83–94 %). Friedel–Crafts adduct 7 t was subjected to a copper(I)‐catalyzed azide–alkyne cycloaddition to obtain biologically important 3‐aryl‐3‐hydroxy‐2‐oxindole 11 in good enantiomeric excess and having a 1,2,3‐triazole moiety.     

Disiloxane-protected 2-deoxyribonolactone as an efficient precursor to 1,2-dideoxy-1-beta-aryl-D-ribofuranoses

[formula: see text] Aryl C-nucleosides are analogues of natural nucleosides where the bases have been replaced with aromatic moieties. Work herein describes the highly stereoselective syntheses of non-hydrogen-bonding carbocyclic derivatives using a disiloxane-protected 2-deoxy-D-ribono-1,4-lactone as a stable and readily accessible starting material. Unlike the bis(TBDMS)-protected congener, this compound enables the use of sterically congested ortho-substituted aryllithium reagents in the initial addition reaction.     

Efficient synthesis of well‐defined amphiphilic cylindrical brushes polymer with high grafting density: Interfacial “Click” chemistry approach

Reported here is a novel approach toward efficient preparation of well‐defined cylindrical brushes polymer (CBPs) with both hydrophobic and hydrophilic side chains connected to the linear backbone by interfacial “click” chemistry in two immiscible solvents. The CBPs with high grafting density of more than 95% and molecular polydispersity (M_w/M_n) less than 1.12 can be readily synthesized using present approach. On contrary, the CBPs synthesized from the “click” reaction in a single solvent in homogenous state have low grafting density of less than 55% and molecular polydispersity (M_w/M_n) more than 1.78. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Click To Bind: Metal Sensors

The copper‐catalyzed azide–alkyne “click” cycloaddition reaction is an efficient coupling reaction that results in the formation of a triazole ring. The wide range of applicable substrates for this reaction allows the construction of a variety of conjugated systems. The additional function of triazoles as metal‐ion ligands has led to the click reaction being used for the construction of optical sensors for metal ions. The triazoles are integral binding elements, which are formed in an efficient modular synthesis. Herein, we review recent examples of triazoles as a metal‐binding element in conjugated metal‐ion sensors.     

Conducting moisture sensitive reactions under mechanochemical conditions

Dry organic solvents are used for various organic reactions that employ moisture sensitive reagents. The processes to dry these solvents are hazardous and costly. Setting up reactions in an open atmosphere while using moisture sensitive reagents has little to no effect on the rate or yield of the reaction under mechanochemical conditions. We believe this is partly due to the gaseous nature of the water vapor in the air compared to the dissolved water and oxygen in solution.