Solvent‐Free One‐Step Photochemical Hydroxylation of Benzene Derivatives by the Singlet Excited State of 2,3‐Dichloro‐5,6‐dicyano‐p‐benzoquinone Acting as a Super Oxidant

Photoinduced hydroxylation of neat deaerated benzene to phenol occurred under visible‐light irradiation of 2,3‐dichloro‐5,6‐dicyano‐p‐benzoquinone (DDQ), which acts as a super photooxidant in the presence of water. Photocatalytic solvent‐free hydroxylation of benzene derivatives with electron‐withdrawing substituents such as benzonitrile, nitrobenzene, and trifluoromethylbenzene used as neat solvents has been achieved for the first time by using DDQ as a super photooxidant to yield the corresponding phenol derivatives and 2,3‐dichloro‐5,6‐dicyanohydroquinone (DDQH₂) in the presence of water under deaerated conditions. In the presence of dioxygen and tert‐butyl nitrite, the photocatalytic hydroxylation of neat benzene occurred with DDQ as a photocatalyst to produce phenol. The photocatalytic reactions are initiated by oxidation of benzene derivatives with the singlet and triplet excited states of DDQ to form the corresponding radical cations, which associate with benzene derivatives to produce the dimer radical cations, which were detected by the femto‐ and nanosecond laser flash photolysis measurements to clarify the photocatalytic reaction mechanisms. Radical cations of benzene derivatives react with water to yield the OH‐adduct radicals. On the other hand, DDQ ^{. ?} produced by the photoinduced electron transfer from benzene derivatives reacts with the OH‐adduct radicals to yield the corresponding phenol derivatives and DDQH₂. DDQ is recovered by the reaction of DDQH₂ with tert‐butyl nitrite when DDQ acts as a photocatalyst for the hydroxylation of benzene derivatives by dioxygen.     

Microwave‐Hydrothermal Preparation and Visible‐Light Photoactivity of Plasmonic Photocatalyst Ag‐TiO2 Nanocomposite Hollow Spheres

Visible‐light‐driven plasmonic photocatalyst Ag‐TiO₂ nanocomposite hollow spheres are prepared by a template‐free chemically‐induced self‐transformation strategy under microwave‐hydrothermal conditions, followed by a photochemical reduction process under xenon lamp irradiation. The prepared samples are characterized by using scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, N₂ adsorption‐desorption isotherms, X‐ray photoelectron spectroscopy, UV/Vis and Raman spectroscopy. Production of ?OH radicals on the surface of visible‐light illuminated TiO₂ was detected by using a photoluminescence method with terephthalic acid as the probe molecule. The photocatalytic activity of as‐prepared samples was evaluated by photocatalytic decolorization of Rhodamine B (RhB) aqueous solution at ambient temperature under visible‐light irradiation. The results show that the surface plasmon absorption band of the silver nanoparticles supported on the TiO₂ hollow spheres was red shifted, and a strong surface enhanced Raman scattering effect for the Ag‐TiO₂ nanocomposite sample was observed. The prepared nanocomposite hollow spheres exhibits a highly visible‐light photocatalytic activity for photocatalytic degradation of RhB in water, and their photocatalytic activity is higher than that of pure TiO₂ and commercial Degussa P25 (P25) powders. Especially, the as‐prepared Ag‐TiO₂ nanocomposite hollow spheres at the nominal atomic ratio of silver to titanium ( R ) of 2 showed the highest photocatalytic activity, which exceeds that of P25 by a factor of more than 2.     

Visible‐Light Photoresponse of Gold Nanoparticles Supported on TiO2: A Combined Photocatalytic,Photoelectrochemical, and Transient Spectroscopy Study

In the context of gaining understanding on the origin of the visible‐light photoresponse of TiO₂ containing gold nanoparticles, the photocurrent spectra and photocatalytic H₂ evolution of titania (P25) and Au–P25 were compared. Whereas no photocurrent was detected upon visible‐light irradiation for either of the two photocatalysts, Au–P25 exhibited photocatalytic H₂ evolution for wavelengths between 400 and 575 nm. This contradictory behavior under visible‐light irradiation of Au–P25 was rationalized by transient absorption spectroscopy. It was suggested that photocatalytic H₂ generation results from methanol quenching of the charge‐separation state in each semiconductor nanoparticle, but the lack of photocurrent is due to the short lifetime of the charge separation, which makes interparticle charge migration for micrometric distances unlikely.     

Mechanistic Insight into the Catalytic Oxidation of Cyclohexane over Carbon Nanotubes: Kinetic and In Situ Spectroscopic Evidence

As some of the most interesting metal‐free catalysts, carbon nanotubes (CNTs) and other carbon‐based nanomaterials show great promise for some important chemical reactions, such as the selective oxidation of cyclohexane (C₆H₁₂). Due to the lack of fundamental understanding of carbon catalysis in liquid‐phase reactions, we have sought to unravel the role of CNTs in the catalytic oxidation of C₆H₁₂ through a combination of kinetic analysis, in situ spectroscopy, and density functional theory. The catalytic effect of CNTs originates from a weak interaction between radicals and their graphene skeletons, which confines the radicals around their surfaces. This, in turn, enhances the electron‐transfer catalysis of peroxides to yield the corresponding alcohol and ketone.     

Diesel Soot Combustion over Mn2O3 Catalysts with Different Morphologies: Elucidating the Role of Active Oxygen Species in Soot Combustion

Catalytic diesel soot combustion was examined using a series of Mn₂O₃ catalysts with different morphologies, including plate, prism, hollow spheres and powders. The plate‐shaped Mn₂O₃ (Mn₂O₃‐plate) exhibited superior carbon soot combustion activity compared to the prism‐shaped, hollow‐structured and powdery Mn₂O₃ under both tight and loose contact modes at soot combustion temperatures (T₅₀) of 327 °C and 457 °C, respectively. Comprehensive characterization studies using scanning electron microscopy, scanning transmission electron microscopy, X‐ray diffraction, X‐ray photoelectron spectroscopy, temperature‐programmed reduction and oxygen release measurements, revealed that the improved activity of Mn₂O₃‐plate was mainly attributed to the high oxygen release rate of surface‐adsorbed active oxygen species, which originated from oxygen vacancy sites introduced during the catalyst preparation, rather than specific surface‐exposed planes. The study provides new insights for the design and synthesis of efficient oxidation catalysts for carbon soot combustion as well as for other oxidation reactions of harmful hydrocarbon compounds.     

Exploring the Strength of the H‐Bond in Synthetic Models for Heme Proteins: The Importance of the N−H Acidity of the Distal Base

The distal hydrogen bond (H‐bond) in dioxygen‐binding proteins is crucial for the discrimination of O₂ with respect to CO or NO. We report the preparation and characterization of a series of Zn^II porphyrins, with one of three meso‐phenyl rings bearing both an alkyl‐tethered proximal imidazole ligand and a heterocyclic distal H‐bond donor connected by a rigid acetylene spacer. Previously, we had validated the corresponding Co^II complexes as synthetic model systems for dioxygen‐binding heme proteins and demonstrated the structural requirements for proper distal H‐bonding to Co^II‐bound dioxygen. Here, we systematically vary the H‐bond donor ability of the distal heterocycles, as predicted based on pK_a values. The H‐bond in the dioxygen adducts of the Co^II porphyrins was directly measured by Q‐band Davies‐ENDOR spectroscopy. It was shown that the strength of the hyperfine coupling between the dioxygen radical and the distal H‐atom increases with enhanced acidity of the H‐bond donor.     

Silver Quantum Cluster (Ag9)‐Grafted Graphitic Carbon Nitride Nanosheets for Photocatalytic Hydrogen Generation and Dye Degradation

We report the visible‐light photocatalytic properties of a composite system consisting of silver quantum clusters [Ag₉(H₂MSA)₇] (H₂MSA=mercaptosuccinic acid) embedded on graphitic carbon nitride nanosheets (AgQCs‐GCN). The composites were prepared through a simple chemical route; their structural, chemical, morphological, and optical properties were characterized by using X‐ray diffraction (XRD), energy dispersive X‐ray spectroscopy, transmission electron microscopy, UV/Vis diffuse reflectance spectroscopy, and photoluminescence spectroscopy. Embedment of [Ag₉(H₂MSA)₇] on graphitic carbon nitride nanosheets (GCN) resulted in extended visible‐light absorption through multiple single‐electron transitions in Ag quantum clusters and an effective electronic structure for hydroxyl radical generation, which enabled increased activity in the photocatalytic degradation of methylene blue and methyl orange dye molecules compared with pristine GCN and silver nanoparticle‐grafted GCN (AgNPs‐GCN). Similarly, the amount of hydrogen generated by using AgQCs‐GCN was 1.7 times higher than pristine GCN. However, the rate of hydrogen generated using AgQCs‐GCN was slightly less than that of AgNPs‐GCN because of surface hydroxyl radical formation. The plausible photocatalytic processes are discussed in detail.     

Fabrication of Predominantly Mn4+‐Doped TiO2 Nanoparticles under Equilibrium Conditions and Their Application as Visible‐Light Photocatalyts

The chemical state of a transition‐metal dopant in TiO₂ can intrinsically determine the performance of the doped material in applications such as photocatalysis and photovoltaics. In this study, manganese‐doped TiO₂ is fabricated by a near‐equilibrium process, in which the TiO₂ precursor powder precipitates from a hydrothermally obtained transparent mother solution. The doping level and subsequent thermal treatment influence the morphology and crystallization of the TiO₂ samples. FTIR spectroscopy and X‐ray photoelectron spectroscopy analyses indicate that the manganese dopant is substitutionally incorporated by replacing Ti⁴⁺ cations. The absorption band edge can be gradually shifted to 1.8 eV by increasing the nominal manganese content to 10 at %. Manganese atoms doped into the titanium lattice are associated with the dominant 4+ valence oxidation state, which introduces two curved, intermediate bands within the band gap and results in a significant enhancement in photoabsorption and the quantity of photogenerated hydroxyl radicals. Additionally, the high photocatalytic performance of manganese‐doped TiO₂ is also attributed to the low oxygen content, owing to the equilibrium fabrication conditions. This work provides an important strategy to control the chemical and defect states of dopants by using an equilibrium fabrication process.     

Free Radical Chemistry of Phosphasilenes

Understanding the characteristics of radicals formed from silicon‐containing heavy analogues of alkenes is of great importance for their application in radical polymerization. Steric and electronic substituent effects in compounds such as phosphasilenes not only stabilize the Si=P double bond, but also influence the structure and species of the formed radicals. Herein we report our first investigations of radicals derived from phosphasilenes with Mes, Tip, Dur, and NMe₂ substituents on the P atom, using muon spin spectroscopy and DFT calculations. Adding muonium (a light isotope of hydrogen) to phosphasilenes reveals that: a) the electron‐donor NMe₂ and the bulkiest Tip‐substituted phosphasilenes form several muoniated radicals with different rotamer conformations; b) bulky Dur‐substituted phosphasilene forms two radicals (Si‐ and P‐centred); and c) Mes‐substituted phosphasilene mainly forms one species of radical, at the P centre. These significant differences result from intramolecular substituent effects.     

偏硼酸锶催化剂光催化还原CO2合成CH4

采用溶胶-凝胶法制备出偏硼酸锶(SrB₂O₄)光催化剂. 紫外光催化还原CO₂合成CH₄(在液相水中)的实验证明: SrB₂O₄催化剂的光催化活性略高于TiO₂(P25). 利用X射线电子衍射谱(XRD)、傅里叶变换红外(FTIR)光谱、X射线光电子能谱(XPS)、透射电子显微镜(TEM)、荧光(PL)光谱和紫外-可见(UV-Vis)漫反射吸收光谱等技术, 研究了SrB₂O₄ 催化剂的晶体结构、形貌和能带结构. 结果表明: SrB₂O₄ 的价带为2.07 V (vs normalhydrogen electrode (NHE)), 低于(H₂O/H⁺)的氧化还原电位E_redox^o (0.82 V (vs NHE)); 而导带为-1.47 V (vsNHE), 高于(CO₂/CH₄)的氧化还原电位E_redox^o (-0.24 V (vs NHE)). 因此, SrB₂O₄催化剂可以有效地光催化还原CO₂生成CH₄. 与TiO₂(P25)相比, SrB₂O₄催化剂具有相对较高导带, 光生电子的还原能力强于TiO₂(P25), 更有利于CH₄的生成, 从而决定了SrB₂O₄催化剂光催化还原CO₂合成CH₄具有较高的光催化活性.     

Probing Hydrogen Bonding to Bound Dioxygen in Synthetic Models for Heme Proteins: The Importance of Precise Geometry

Distal hydrogen bonding in natural dioxygen binding proteins is crucial for the discrimination between different potential ligands such as O₂ or CO. In the present study, we probe the chemical requirements for proper distal hydrogen bonding in a series of synthetic model compounds for dioxygen‐binding heme proteins. The model compounds 1‐Co to 7‐Co bear different distal residues. The hydrogen bonding in their corresponding dioxygen adducts is directly measured by pulse EPR spectroscopy. The geometrical requirements for this interaction to take place were found to be narrow and very specific. Only two model complexes, 1‐Co and 7‐Co , form a hydrogen bond to bound dioxygen, which was characterized in terms of geometry and nature of the bond. The geometry and dipolar nature of this interaction in 1‐Co ‐O₂ is more similar to the one in natural cobalt myoglobin (Co‐Mb), making 1‐Co the best model compound in the entire series.     

Selective Activation of C=C Bond in Sustainable Phenolic Compounds from Lignin via Photooxidation: Experiment and Density Functional Theory Calculations

Lignocellulosic biomass can be converted to high‐value phenolic compounds, such as food additives, antioxidants, fragrances and fine chemicals. We investigated photochemical and heterogeneous photocatalytic oxidation of two isomeric phenolic compounds from lignin, isoeugenol and eugenol, in several nonprotic solvents, for the first time by experiment and the density functional theory (DFT) calculations. Photooxidation was conducted under ambient conditions using air, near‐UV light and commercial P25 TiO₂ photocatalyst, and the products were determined by TLC, UV–Vis absorption spectroscopy, HPLC‐UV and HPLC‐MS. Photochemical and photocatalytic oxidation of isoeugenol proceeds via the mild oxidative “dimerization” to produce the lignan dehydrodiisoeugenol (DHDIE), while photooxidation of eugenol does not proceed. The DFT calculations suggest a radical stepwise mechanism for the oxidative “dimerization” of isoeugenol to DHDIE as was calculated for the first time.     

Correlation of the Catalytic Activity for Oxidation Taking Place on Various TiO2 Surfaces with Surface OH Groups and Surface Oxygen Vacancies

Three catalytic oxidation reactions have been studied: The ultraviolet (UV) light induced photocatalytic decomposition of the synthetic dye sulforhodamine B (SRB) in the presence of TiO₂ nanostructures in water, together with two reactions employing Au/TiO₂ nanostructure catalysts, namely, CO oxidation in air and the decomposition of formaldehyde under visible light irradiation. Four kinds of TiO₂ nanotubes and nanorods with different phases and compositions were prepared for this study, and gold nanoparticle (Au‐NP) catalysts were supported on some of these TiO₂ nanostructures (to form Au/TiO₂ catalysts). FTIR emission spectroscopy (IES) measurements provided evidence that the order of the surface OH regeneration ability of the four types of TiO₂ nanostructures studied gave the same trend as the catalytic activities of the TiO₂ nanostructures or their respective Au/TiO₂ catalysts for the three oxidation reactions. Both IES and X‐ray photoelectron spectroscopy (XPS) proved that anatase TiO₂ had the strongest OH regeneration ability among the four types of TiO₂ phases or compositions. Based on these results, a model for the surface OH group generation, absorption, and activation of molecular oxygen has been proposed: The oxygen vacancies at the bridging O^2? sites on TiO₂ surfaces dissociatively absorb water molecules to form OH groups that facilitate adsorption and activation of O₂ molecules in nearby oxygen vacancies by lowering the absorption energy of molecular O₂. A new mechanism for the photocatalytic formaldehyde decomposition with the Au/TiO₂ catalysts is also proposed, based on the photocatalytic activity of the Au‐NPs under visible light. The Au‐NPs absorb the light owing to the surface plasmon resonance effect and mediate the electron transfers that the reaction needs.     

Photocatalytic disinfection of bacterial pollutants using suspended and immobilized TiO2 powders

The photocatalytic disinfection of Enterobacter cloacae and Enterobacter coli using microwave (MW), convection hydrothermal (HT) and Degussa P25 titania was investigated in suspension and immobilized reactors. In suspension reactors, MW‐treated TiO₂ was the most efficient catalyst (per unit weight of catalyst) for the disinfection of E. cloacae. However, HT‐treated TiO₂ was approximately 10 times more efficient than MW or P25 titania for the disinfection of E. coli suspensions in surface water using the immobilized reactor. In immobilized experiments, using surface water a significant amount of photolysis was observed using the MW‐ and HT‐treated films; however, disinfection on P25 films was primarily attributed to photocatalysis. Competitive action of inorganic ions and humic substances for hydroxyl radicals during photocatalytic experiments, as well as humic substances physically screening the cells from UV and hydroxyl radical attack resulted in low rates of disinfection. A decrease in colony size (from 1.5 to 0.3 mm) was noted during photocatalytic experiments. The smaller than average colonies were thought to occur during sublethal ^?OH and O₂^?? attack. Catalyst fouling was observed following experiments in surface water and the ability to regenerate the surface was demonstrated using photocatalytic degradation of oxalic acid as a model test system.     

Fe2O3–TiO2 Nanocomposites for Enhanced Charge Separation and Photocatalytic Activity

Photocatalysis provides a cost effective method for both renewable energy synthesis and environmental purification. Photocatalytic activity is dominated by the material design strategy and synthesis methods. Here, for the first time, we report very mild and effective photo‐deposition procedures for the synthesis of novel Fe₂O₃–TiO₂ nanocomposites. Their photocatalytic activities have been found to be dramatically enhanced for both contaminant decomposition and photoelectrochemical water splitting. When used to decompose a model contaminant herbicide, 2,4‐dichlorophenoxyacetic acid (2,4‐D), monitored by both UV/Vis and total organic carbon (TOC) analysis, 10 % Fe–TiO₂–H₂O displayed a remarkable enhancement of more than 200 % in the kinetics of complete mineralisation in comparison to the commercial material P25 TiO₂ photocatalyst. Furthermore, the photocurrent is nearly double that of P25. The mechanism for this improvement in activity was determined using density functional theory (DFT) and photoluminescence. These approaches ultimately reveal that the photoelectron transfer is from TiO₂ to Fe₂O₃. This favours O₂ reduction which is the rate‐determining step in photocatalytic environmental purification. This in situ charge separation also allows for facile migration of holes from the valence band of TiO₂ to the surface for the expected oxidation reactions, leading to higher photocurrent and better photocatalytic activity.     

Reaction mechanism and modeling study for the oxidation by SO2 of o‐xylene and p‐xylene in Claus process

Claus process, comprising of a furnace and a catalytic unit, is used to produce sulfur from H₂S. The aromatic contaminants (benzene, toluene, and xylenes) in H₂S feed form soot, and clog and deactivate the catalysts. Xylenes are known to be the most damaging ones. Therefore, there is a need to oxidize them in the furnace to enhance catalyst life. This article presents a kinetics study on the oxidation of o‐ and p‐xylene radicals by SO₂ (an oxidant that is already present in the furnace) using density functional theory and a composite method. The mechanism begins with H‐abstraction from xylenes to form xylyl radicals, followed by exothermic addition of SO₂ to them. The breakage of O S bond in the xylyl‐SO₂ adducts leads to the loss of SO molecule, while the remaining O atom on them helps in their oxidation. The isomerization study shows that less‐stable dimethylphenyl radicals have a high tendency to isomerize to resonantly stabilized methylbenzyl radicals. However, methylbenzyl radicals have lower reactivity toward SO₂ than dimethylphenyl radicals. The reaction rate constants were found using transition state theory. The reactor simulations reveal that p‐xylene has lower reactivity toward SO₂ than o‐xylene, and CO, SO, and CHO are the main by‐products of oxidation.     

Low Temperature Solvent Evaporation-induced Crystallization Synthesis of Nanocrystalline TiO2 Photocatalyst

A novel and efficient methodology for obtaining highly active photocatalyst of bi-phase TiO2 with small particle size and high specific surface area was developed by solvent evaporation-in-duced crystallization (SEIC) method at low temperature. The prepared TiO2 powder was characterized with X-ray diffraction (XRD), transmission electron microscopy (TEM) and BET surface areas. The photocatalyfic activity was evaluated by the photocatalyflc oxidation of acetone in air. The results showed that the photocatalytic activity of the TiO2 powder preDared by this method approached that of Degnssa P25. This may be atotributed to the fact that the predated TiO2 powder had larzer specific surface areas (265 m2. g- 1 ) and smaller crystallite size (about 5 nm), but relatively low crystallinity, as compared with Degussa P25.     

Thermal behavior of carbon nanotubes decorated with gold nanoparticles

Three different forms of carbon, i.e., multi-walled carbon nanotubes (CNTs), single-walled CNTs, and soot, were decorated with gold nanoparticles by a new method. In this method C₁₀H₈ ⁻ ions transfer electrons to the CNTs or soot. These electrons on the carbon surface can then reduce Au³⁺ species to form supported Au nanoparticles with a narrow particle size distribution. Thermogravimetric/differential thermal analyses (TG/DTA), XRD, Raman, and TEM show that naphthalene molecules remain trapped inside the Au nanoparticles and can only be removed by treatment at ca. 300 °C. Remarkable effect of the Au nanoparticles on the oxidation of carbon by O₂ is also observed by TG/DTA, i.e., on-set oxidation temperature and activation energy (E _a). It is shown that as the Au particle size decreases from 25 to 2 nm a linear decrease of the oxidation temperature is observed. Au particles larger than 25 nm do not produce any significant effect on carbon oxidation. These results are discussed in terms of spillover catalytic effect where Au nanoparticles activate O₂ molecules to produce active oxygen species which oxidize the different carbon supports.     

MIL-101/P25复合材料的制备及光催化性能

采用水热法,将MIL-101负载到预处理过的P25表面,制得MIL-101/P25复合光催化材料,通过X射线衍射(XRD)、傅里叶变换红外(FTIR)、低温N2物理吸附-脱附(BET)、热重(TG)、场发射透射电镜(FETEM)和光致发光光谱(PL)等对催化剂进行结构表征,同时考察MIL-101及复合材料的稳定性,并且提出协同因子指标来定量评价复合带来的协同效应。结果表明MIL-101呈片状,与P25部分结合。复合后,MIL-101的稳定性得到提高。在适当的配比下,复合具有协同效应,当Cr(NO3)3·9H2O与P25的物质的量之比为1∶1时,复合材料对罗丹明B的可见光催化活性最高,协同因子达到1.64。复合材料对无色有机污染物水杨酸同样表现出良好的光催化效果。     

A New Iron‐Based Carbon Monoxide Oxidation Catalyst: Structure–Activity Correlation

A new iron‐based catalyst for carbon monoxide oxidation, as a potential substitute for precious‐metal systems, has been prepared by using a facile impregnation method with iron tris‐acetylacetonate as a precursor on γ‐Al₂O₃. Light‐off and full conversion temperatures as low as 235 and 278 °C can be reached. However, the catalytic activity strongly depends on the loading; lower loadings perform better than higher ones. The different activities can be explained by variations of the structures formed. The structures are thoroughly characterized by a multimethodic approach by using X‐ray diffraction, Brunauer–Emmett–Teller surface areas, and Mössbauer spectroscopy combined with diffuse reflectance UV/Vis and X‐ray absorption spectroscopy. Consequently, isolated tetrahedrally coordinated Fe³⁺ centers and phases of AlFeO₃ are identified as structural requirements for high activity in the oxidation of carbon monoxide.