Characterisation of solute mobility in hypercross-linked resins in solvents of different polarity: two promising supports for catalysis

Two hypercross-linked resins stemming from a gel-type poly-chloromethylated styrene-divinylbenzene resin (GT) in beaded form are investigated with a combination of spectroscopic techniques (EPR and time-domain (TD)-NMR spectroscopy) to evaluate their use as supports for the development of operationally flexible heterogeneous metal catalysts, suitable to be employed in liquid and gas phase. The first resin (HGT) is the direct product of the hypercross-linking reaction, whereas the second one (HGS) is the sulphonated analogue of HGT obtained by exchanging approximately 3?wt?% of the chloromethyl groups with sulphonic groups. HGT and HGS absorb both polar and apolar solvents in the permanent nanoporosity created by the hypercross-linking, and NMR data highlight that the pore size is not affected by the different properties of the investigated liquid media. The EPR analysis of the dry resins reveals that during the hypercross-linking process paramagnetic species are formed in the HGT beads, which persist in the sulphonated resin. The mobility of solutes inside the polymers framework was investigated with EPR spectroscopy upon soaking the resins with solutions of two spin probes (2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) and 4-hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPOL)) in THF, toluene, n-heptane and water. The EPR spectra show that, depending on the solvent, the two resins can act as sorbents, able to trap the solutes in the polymer framework, or as simple supports that allow free diffusion of the solutes. Our results suggest that HGT and HGS are promising supporting materials for metal catalysts, provided one chooses carefully the solvent to be employed for the catalysed reaction as this choice strongly affects the mobility of the substrates and, thus their effective reactivity.     

Synthesis of poly(ethylene oxide) with pending 2,2,6,6‐tetramethylpiperidine‐1‐oxyl groups and its further initiation of the grafting polymerization of styrene

A new stratagem for the synthesis of amphiphilic graft copolymers of hydrophilic poly(ethylene oxide) as the main chain and hydrophobic polystyrene as the side chains is suggested. A poly(ethylene oxide) with pending 2,2,6,6‐tetramethylpiperidine‐1‐oxyls [poly(4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐co‐ethylene oxide)] was first prepared by the anionic ring‐opening copolymerization of ethylene oxide and 4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl, and then the graft copolymerization of styrene was completed with benzoyl peroxide as the initiator in the presence of poly(4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐co‐ethylene oxide). The polymerization of styrene was under control, and comblike, amphiphilic poly(ethylene oxide)‐g‐polystyrene was obtained. The copolymer and its intermediates were characterized with size exclusion chromatography, ¹H NMR, and electron spin resonance in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3836–3842, 2006     

Reactions of nitroxides with sulfur‐containing compounds,part IV: Synthesis of novel nitroxide (thio)ureas1

The reactions of 4‐isothiocyanato‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl 2 and 4‐isocyanato‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl 3 with selected amines and lower alcohols give the corresponding novel thioureas 4 , ureas 5 , thiocarbamates 6 , and carbamates 7 , all bearing the nitroxyl moiety. The characteristic features of EI mass spectra of (thio)ureas 4 and 5 are described. Some of the synthesized thioureas 4 , ureas 5 , thiocarbamates 6 , and carbamates 7 are moderately or weakly active against pathogenic fungi. © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:393–401, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20228     

Synthesis of Polystyrene‐block‐poly(butyl acrylate) Copolymers Using Nitroxide‐Mediated Living Radical Polymerization in Miniemulsion

Living free‐radical butyl acrylate polymerization in miniemulsion was initiated by polystyrene bearing a nitroxyl end group to yield polystyrene‐block‐poly(butyl acrylate) block copolymers. Polystyrene macroinitiator was obtained using different initiating systems (potassium persulfate or benzoyl peroxide) in the presence of 2,2,6,6‐tetramethylpiperidine‐N‐oxyl (TEMPO) or the more water‐soluble 4‐hydroxy‐2,2,6,6‐tetramethylpiperidin‐N‐oxyl (OH‐TEMPO). The nitroxide water‐solubility has an important influence in determining molecular weight distribution and controlling the growth of the second block.     

Rod-like Schiff Base Magnetic Liquid Crystals Bearing Organic Radical

4 novel rod-like Schiff base magnetic liquid crystals have been prepared in which trans-bicyclohexyl or trans-cyclohexyl phenyl and biphenyl carboxylic acid phenol ester mesogenic cores with n-propyl and n-pentyl subsfituents were terminated by 4-amino-TEMPO （TEMPO=2,2,6,6-tetramethylpiperidine-l-oxyl）. Of these compounds the silk-like and schlieren textures were found from 4e and 4d by POM （Polarizing Optical Microscope）. DSC （Differential Scanning Calorimeter） measurements show that the mesophase exists from 4-6℃. EPR spectra reveal their paramagnetic properties.     

Efficient 2,2,6,6‐Tetramethylpiperidine‐1‐oxyl/iron Catalyzed Aerobic Dehydrogenation of Hexanitrobibenzyl to Hexanitrostilbene

Hexanitrostilbene (HNS) was efficiently produced through the dehydrogenation of hexanitrobibenzyl (HNBB) with oxygen catalyzed by 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO)/ferrous chloride (FeCl₂) in 80% yield, and up to a 308 turnover number was achieved. First, TEMPO is used in the dehydrogenation and the influence of reaction time, temperature, solvent and the catalyst were discussed. A possible mechanism of this catalytic process is proposed and it is obtained that Fe(II) can abstract hydrogen from HNBB and the function of the function of TEMPO is to oxidize Fe(II)OOH to Fe(III)OO.     

Reactions of an indolinonic nitroxide with superoxide radical anion in the presence of alkylhalides. Unexpected formation of a reduced transposed product

This study concerns the reactions of 2‐methyl‐2‐phenyl‐3‐phenylimino‐2,3‐dihydroindol‐l‐oxyl and 2,2,6,6‐tetramethylpiperidine‐1‐oxyl with alkylperoxyls, generated from potassium superoxide and a series of alkylhalides, in order to evaluate possible differences in reactivity with primary, secondary and tertiary alkylperoxyls. To better understand the reactivity of the studied indolinonic aminoxyl in alkaline medium, the investigation was extended to its reactions with potassium hydroxide and potassium tert‐butoxide in different solvents.     

The study of paramagnetic self‐assembled monolayers formed by nitroxide radical (TEMPO)3O3P on HOPG

The studies of (TEMPO)₃O₃P molecules (tri‐(2,2,6,6‐tetramethyl‐1‐oxyl‐4‐piperidyl) phosphite) and their monolayers formed on highly oriented pyrolytic graphite (HOPG) are presented. (TEMPO)₃O₃P is synthesized from TEMPOL precursor (4‐hydroxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl). We focused on electron paramagnetic resonance (EPR) and scanning tunnelling microscopy (STM) investigations. The EPR experiments demonstrate the paramagnetism of (TEMPO)₃O₃P in powdered form and in solution. Furthermore, these paramagnetic properties of (TEMPO)₃O₃P are preserved after the deposition on HOPG substrate. The STM studies show that (TEMPO)₃O₃P molecules have a strong tendency to form self‐assembled monolayers (SAMs). The detailed STM images let us to explore the structure of (TEMPO)₃O₃P on HOPG and propose a structural model for the observed SAMs. Copyright © 2013 John Wiley & Sons, Ltd.     

Fractional free volumes in structural defects of butadiene–nitrile elastomers of various polarities and rotational mobilities of nitroxyl radicals

The correlation between the magnitudes of the fast components of rotational mobility of the nitroxyl radicals (2,2,6,6-tetramethylpiperidine-1-yl)oxyl and (4-benzoyloxy-2,2,6,6-tetramethylpiperidine-1-yl)oxyl measured via EPR spectroscopy, the fractional free volumes in the structural defects of butadiene–nitrile rubbers and the related vulcanized rubbers, in which the nitroxyl radicals are sorbed, and a variation in this correlation with an increase in temperature are established.     

Electrocatalytic Oxidation of Amines on a Mediator‐Modified Electrode by Electrochemical Copolymerization of Nitroxyl Radical Precursor Containing Pyrrole Side Chain and Bithiophene

This paper describes the electrocatalytic oxidation of amines on TEMPO (2,2,6,6‐tetramethylpiperidine‐1‐oxyl)‐modified electrodes prepared by electrochemical copolymerization of TEMPO precursor containing pyrrole side chain and 2,2′‐bithiophene. The modified electrode exhibits electrocatalytic activity for the oxidation of primary and secondary amines. Cyclic voltammetric studies showed that the peak current of the cyclic voltammogram increased linearly with increasing concentration of amine in the sample solution.     

Simultaneous evaluation of one‐electron reducing systems and radical reactions in cells by nitroxyl biradical as probe

In the present study, a novel probe for the simultaneous evaluation of one‐electron reducing systems (electron transport chain) and one‐electron oxidizing systems (free radical reactions) in cells by electron chemical detection was developed. Six‐membered cyclic nitroxyl radicals (2,2,6,6‐tetramethylpiperidine‐1‐oxyl; TEMPO series) are sensitive to one‐electron redox systems, generating the hydroxylamine form [TEMPO(H)] via one‐electron reduction, and the secondary amine form [TEMPO(N)] via one‐electron oxidation in the presence of thiols. In contrast, the sensitivities of five‐membered cyclic nitroxyl radicals (2,2,5,5‐tetramethylpyrrolidine‐1‐oxyl; PROXYL series) to the one‐electron redox systems are comparatively low. The electron chemical detector can detect 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO), TEMPO(H) and PROXYL but not TEMPO(N). Therefore, nitroxyl biradical, TEMPO‐PROXYL, as a probe for the evaluation of one‐electron redox systems was employed. TEMPO‐PROXYL was synthesized by the conjunction of 4‐amino‐TEMPO with 3‐carboxyl‐PROXYL via the conventional dicyclohexyl carbodiimide reaction. TEMPO‐PROXYL, TEMPO(H)‐PROXYL and TEMPO(N)‐PROXYL were simultaneously quantified by HPLC with Coularray detection. Calibration curves for the quantification of TEMPO‐PROXYL, TEMPO(H)‐PROXYL and TEMPO(N)‐PROXYL were linear in the range from 80 nm to 80 μm , and the lowest quantification limit of each molecule was estimated to be <80 nm . The relative standard deviations at 0.8 and 80 μm were within 10% (n = 5). Copyright © 2015 John Wiley & Sons, Ltd.     

Grafting of functional nitroxyl free radicals to polyolefins as a tool to postreactor modification of polyethylene‐based materials with control of macromolecular architecture

Nitroxyl radicals were used as functionalizing agents during the free radical postreactor modification process of polyolefins carried out in the melt. The 4‐hydroxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl (HO‐TEMPO) and the 4‐benzoyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl (BzO‐TEMPO) free radicals were successfully grafted onto a polyethylene‐based material (ethylene‐co‐1‐octene copolymer) by coupling reaction with polymer macroradicals; these last were formed by H‐abstraction through peroxide addition. The macromolecular structure of the functionalized polyolefins was assessed by ¹H‐NMR, FTIR spectroscopy, and SEC measurements which were used to evidence the grafting site, to evaluate the grafting level and to highlight the occurrence of chain extension through crosslinking side reactions. Indeed the use of proper model compounds allowed the preparation of accurate FTIR calibration curves for the quantitative determination of the functionalization degree. Besides the high temperature SEC analysis highlighted that this fast and simple coupling reaction between macroradicals and nitroxyl free radicals grants the grafting of functionalities onto the polyolefin backbone by contemporarily preventing the side reactions liable of the structure and MW modification of the pristine polymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Generation of Aryl Radicals through Reduction of Hypervalent Iodine(III) Compounds with TEMPONa: Radical Alkene Oxyarylation

A novel method for selective generation of aryl radicals from diaryliodonium salts and iodanylidene malonates with sodium 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPONa) as a single‐electron transfer (SET) reducing reagent is described. In the presence of various alkenes, aryl radicals formed after SET‐reduction of hypervalent iodine compounds undergo alkene addition and the adduct radicals that are thus generated are efficiently trapped by the concomitantly generated TEMPO radical to eventually afford oxyarylated products in moderate to very good yields. The efficiency of aryl radical generation of various iodine(III) reagents is studied and the generation of an iodanylidene malonate aryl radical is also investigated by computational methods.     

Postfunctionalization of polyoxanorbornene backbone through the combination of bromination and nitroxide radical coupling reactions

The brominated backbone of poly(oxanorbornene imide) (PONB) (PONB‐Br) was functionalized with 2,2,6,6‐tetramethylpiperidine 1‐oxyl (TEMPO)‐acrylate, ‐epoxy, and poly (ethylene glycol) (PEG) yielding PONB‐acrylate, PONB‐epoxy, and PONB‐PEG through the nitroxide radical coupling (NRC) reaction. Although an excess amount of functional‐TEMPOs were used. The observed NRC efficiencies were found in the range of 7–25%. Notably, ¹H NMR spectra of all polymers exhibited a signal at 6.08 ppm after NRC reactions indicating rebuilding of the main chain double bond and further identified by ¹³C NMR analysis. The inevitable formation of double bond through the tendency of the recombination of the formed radicals was supported by a separate experiment conducted without utilizing functional‐TEMPO. Besides, the versatility of the ROMP backbone further demonstrated by the introduction hetero functionality onto the polymer by a consecutive reactions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2381–2389     

Nanometer‐sized polyradical particles: Organic magnetic dot array formed on a silicon microfabricated substrate

A magnetically active, purely organic dot array was formed by the selective deposition of polyradical nanoparticles on array‐like‐formed pits on a silicon substrate. The nanometer‐sized polyradical particles, poly(4‐methacryoyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl), were prepared by the emulsion polymerization of 4‐methacryloyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐acetoxyl followed by a deprotection reaction and oxidation in air. The size (diameter) and radical spin concentration of the polyradical nanoparticles were tunable between the polymerization and oxidation conditions. Electrochemical studies revealed the redox property of the polyradical nanoparticles. The magnetic response image of the polyradical nanoparticles was obtained by magnetic force microscopy, reflecting their radical spin concentrations. These results suggested a possible approach for the use of organic polyradical nanoparticles as organic magnetic dot arrays. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 521–530, 2007     

Selective Synthesis of 2,5‐Diformylfuran by Sustainable 4‐acetamido‐TEMPO/Halogen‐Mediated Electrooxidation of 5‐Hydroxymethylfurfural

A new method was developed for the selective gram‐scale synthesis of 2,5‐diformylfuran (DFF), which is an important chemical with a high application potential, via oxidation of biomass‐derived 5‐hydroxylmethylfurfural (HMF) catalyzed by 4‐acetylamino‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl (4‐AcNH‐TEMPO) in a two‐phase system consisting of a methylene chloride and aqueous solution containing sodium hydrogen carbonate and potassium iodide. The key feature of this method is the generation of the I₂ (co‐)oxidant by anodic oxidation of iodide anions during pulse electrolysis. In addition, the electrolyte can be successfully recycled five times while maintaining a 62–65 % yield of DFF. This novel method provides a sustainable pathway for waste‐free production of DFF without the use of metal catalysts and expensive oxidants. An advantage of electrooxidation is utilized in the preparation of demanding chemical.     

Cu(OAc)2/TEMPO Cooperative Promoted Hydroamination Cyclization and Oxidative Dehydrogenation Cascade Reaction of Homopropargylic Amines

A novel and efficient Cu(OAc)₂‐catalyzed hydroamination cyclization and 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO)‐mediated oxidative dehydrogenation cascade reaction of homopropargylic amines has been developed. A library of 1,2‐disubstituted pyrrole derivatives were obtained in good‐to‐high yields in one pot with no step‐by‐step feeding process. This reaction involved TEMPO playing dual roles as both an oxidative dehydrogenation reagent and a ligand. An insight into the reaction mechanism was obtained by using several analytical determination methods.     

Reactions of nitroxides,part 7: Synthesis of novel nitroxide selenoureas

The reactions of 4‐isoselenocyanato‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl with selected amines and lower alcohols give the corresponding novel selenoureas and selenocarbamates, all bearing the nitroxyl moiety. Some of the synthesized selenoureas and selenocarbamates show moderate‐to‐good activity against pathogenic fungi. © 2008 Wiley Periodicals, Inc. Heteroatom Chem 19:549–556, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20454     

Transition-Metal-Free TEMPO Catalyzed Aerobic Oxidation of Alcohols to Carbonyls Using an Efficient Br2 Equivalent under Mild Conditions

An effective transition‐metal‐free catalytic system is developed for aerobic oxidations of alcohols. Using catalytic amount of bromide‐bromate coupling, H₂SO₄, and NaNO₂, together with 2,2,6,6‐tetramethylpiperidine N‐oxyl radical (TEMPO) in the presence of air, various alcohols could be converted into the corresponding aldehydes or ketones in good to excellent isolated yields under mild conditions.     

Reactions of nitroxides,part XI: O‐Aryl phenylselenophosphonates bearing a nitroxyl moiety

O‐Aryl phenylselenophosphonates bearing a nitroxyl moiety were synthesized in the presence of pyridine in diethyl ether from 4‐hydroxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl, and either phenyldichlorophosphine and elemental selenium in 9–35% yield or phenyldichlorophosphine selenide in 36–62% yield. O,O‐Diaryl phenylselenophosphonates and O,O‐bis(2,2,6,6‐tetramethyl‐1‐oxyl‐4‐piperidyl)phenylselenophosphonates were obtained as by‐products. O,O‐Diaryl phenylselenophosphonates were obtained from phenyldichlorophosphine selenide and 2 mol of phenols in 55–86% yield. Antifungal activity of some synthesized selenophosphonates was found. © 2011 Wiley Periodicals, Inc. Heteroatom Chem 22:137–147, 2011; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20667