Exfoliation of Graphite into Graphene in Polar Solvents Mediated by Amphiphilic Hexa‐peri‐hexabenzocoronene

A water‐soluble surfactant consisting of hexa‐peri‐hexabenzocoronene (HBC) as hydrophobic aromatic core and hydrophilic carboxy substituents was synthesized. It exhibited a self‐assembled nanofiber structure in the solid state. Profiting from the π interactions between the large aromatic core of HBC and graphene, the surfactant mediated the exfoliation of graphite into graphene in polar solvents, which was further stabilized by the bulky hydrophilic carboxylic groups. A graphene dispersion with a concentration as high as 1.1 mg L^?1 containing 2–6 multilayer nanosheets was obtained. The lateral size of the graphene sheets was in the range of 100–500 nm based on atomic force microscope (AFM) and transmission electron microscope (TEM) measurements.     

Environmentally Friendly Synthesis of p‐Doped Reduced Graphene Oxide with High Dispersion Stability by Using Red Table Wine

Reduced graphene oxide (rGO) with high dispersion stability and p‐type semiconducting property was synthesized by using environmentally friendly mussel‐inspired chemistry with red table wine. (+)‐Catechin and tannic acid, polyphenolic model compounds present in wine, were selected and successfully utilized for the synthesis of soluble polycatechol‐functionalized rGO.     

Reduced and Surface‐Modified Graphene Oxide with Nonlinear Resistivity

Field‐grading materials (FGMs) are used to reduce the probability for electrical breakdowns in critical regions of electrical components and are therefore of great importance. Usually, FGMs are heavily filled (40 vol.%) with semi‐conducting or conducting particles. Here, polymer‐grafted reduced graphene oxide (rGO) is used as a filler to accomplish percolated networks at very low filling ratios (<2 vol.%) in a semi‐crystalline polymer matrix: poly(ethylene‐co‐butyl acrylate) (EBA). Various simulation models are used to predict the percolation threshold and the flake‐to‐flake distances, to complement the experimental results. A substantial increase in thermal stability of rGO is observed after surface modification, either by silanization or subsequent polymerizations. The non‐linear DC resistivity of neat and silanized rGO and its trapping of charge‐carriers in semi‐crystalline EBA are demonstrated for the first time. It is shown that the polymer‐grafted rGO improve the dispersibility in the EBA‐matrix and that the graft length controls the inter‐flake distances (i.e. charge‐carrier hopping distances). By the appropriate selection of graft lengths, both highly resistive materials at 10 kV mm^‐1 and FGMs with a large and distinct drop in resistivity (six decades) are obtained, followed by saturation. The nonlinear drop in resistivity is attributed to narrow inter‐flake distance distributions of grafted rGO.     

Quantifying the Tunable Conjugated Area of Graphene Oxide by Using Pyrene as a Fluorescent Probe

The determination of oxygenous groups, conjugated area ratio, and reduction efficiency of graphene oxide (GO) is a difficult task because of its heterogeneous structure. Herein, a novel approach is described for a detailed understanding of the surface chemistry of GO by using pyrene as a fluorescent probe through π–π stacking interactions.     

Sulfur‐Annulated Hexa‐peri‐hexabenzocoronene Decorated with Phenylthio Groups at the Periphery

The chemical nature of the edge periphery essentially determines the physical properties of graphene. As a molecular‐level model system, large polycyclic aromatic hydrocarbons, that is, so‐called nanographenes, can be chemically modified through either edge functionalization or doping with heteroatoms. Although the synthetic methods for edge substitution are well‐developed, incorporation with heteroatoms by the bay annulation of large PAHs remains an enormous challenge. In this study, we present a feasible peripheral sulfur annulation of hexa‐peri‐hexabenzocoronene (HBC) by thiolation of perchlorinated HBC. The tri‐sulfur‐annulated HBC and di‐sulfur‐annulated HBC decorated with phenylthio groups were obtained and characterized by X‐ray diffraction, revealing their distinct sulfur‐annulated peripheral structure. Associated with theoretical calculations, we propose that the regioselective sulfur annulation results from the minimization of strain in the aromatic backbone. We further demonstrate the structure‐correlated property modulation by sulfur annulation, manifested by a decrease in band gap and tunable redox activity.     

Pyrene‐Anderson‐Modified CNTs as Anode Materials for Lithium‐Ion Batteries

An organo‐functionalized polyoxometalate (POM)–pyrene hybrid (Py‐Anderson) has been used for noncovalent functionalization of carbon nanotubes (CNTs) to give a Py‐Anderson‐CNT nanocomposite through π–π interactions. The as‐synthesized nanocomposite was used as the anode material for lithium‐ion batteries, and shows higher discharge capacities and better rate capacity and cycling stability than the individual components. When the current density was 0.5 mA cm^?2, the nanocomposite exhibited an initial discharge capacity of 1898.5 mA h g^?1 and a high discharge capacity of 665.3 mA h g^?1 for up to 100 cycles. AC impedance spectroscopy provides insight into the electrochemical properties and the charge‐transfer mechanism of the Py‐Anderson‐CNTs electrode.     

Preparation of a Reduced Graphene Oxide Wrapped Lithium‐Rich Cathode Material by Self‐Assembly

A lithium‐rich cathode material wrapped in sheets of reduced graphene oxide (RGO) and functionalized with polydiallyldimethylammonium chloride (PDDA) was prepared by self‐assembly induced from the electrostatic interaction between PDDA–RGO and the Li‐rich cathode material. At current densities of 1000 and 2000 mA g^?1, the PDDA–RGO sheet wrapped samples demonstrated increased discharge capacities, increasing from 125 to 155 mA h g^?1 and from 82 to 124 mA h g^?1, respectively. The decreased resistance implied by this result was confirmed from electrochemical impedance spectroscopy results, wherein the charge‐transfer resistance of the pristine sample decreased after wrapping with the PDDA–RGO sheets. The PDDA–RGO sheets served as a protective layer sand as a conductive material, which resulted in an improvement in the retention capacity from 56 to 81 % after 90 cycles.     

Elucidation of π‐Conjugation Modes in Diarene‐Fused 1,2‐Dihydro‐1,2‐diborin Dianions

A series of diarene‐fused 1,2‐dihydro‐1,2‐diborins were prepared as a new B? B‐bond‐embedded polycyclic π‐electron system. The reduction of these compounds with metals produced their corresponding dianions, the π‐conjugation modes of which varied from 6π‐conjugation within the central 1,2‐diborin skeleton to 14π peripheral conjugation over the tricyclic skeleton, depending on the nature of the reduced biaryl framework. Moreover, the countercation to the dianions had a significant effect on the absorption spectra, with a dramatic color change from yellow to deep blue, depending on the distance between the tricyclic dianion skeleton and the countercation.     

Self‐Assembled Platinum Nanoflowers on Polydopamine‐Coated Reduced Graphene Oxide for Methanol Oxidation and Oxygen Reduction Reactions

The morphology‐ and size‐controlled synthesis of branched Pt nanostructures on graphene is highly favorable for enhancing the electrocatalytic activity and stability of Pt. Herein, a facile approach is developed for the efficient synthesis of well‐dispersed Pt nanoflowers (PtNFs) on the surface of polydopamine (PDA)‐modified reduced graphene oxide (PDRGO), denoted as PtNFs/PDRGO, in high yield. The synthesis was performed by a simple heating treatment of an aqueous solution that contained K₂PtCl₄ and PDA‐modified graphene oxide (GO) without the need for any additional reducing agent, seed, surfactant, or organic solvent. The coated PDA serves not only as a reducing agent, but also as cross‐linker to anchor and stabilize PtNFs on the PDRGO support. The as‐prepared PtNFs/PDRGO hybrid, with spatially and locally separated PtNFs on PDRGO, exhibits superior electrocatalytic activity and stability toward both methanol oxidation reaction (MOR) and oxygen reduction reaction (ORR) in alkaline solutions.     

Thiol–Yne Click Reactions on Alkynyl–Dopamine‐Modified Reduced Graphene Oxide

The large‐scale preparation of graphene is of great importance due to its potential applications in various fields. We report herein a simple method for the simultaneous exfoliation and reduction of graphene oxide (GO) to reduced GO (rGO) by using alkynyl‐terminated dopamine as the reducing agent. The reaction was performed under mild conditions to yield rGO functionalized with the dopamine derivative. The chemical reactivity of the alkynyl function was demonstrated by post‐functionalization with two thiolated precursors, namely 6‐(ferrocenyl)hexanethiol and 1H,1H,2H,2H‐perfluorodecanethiol. X‐ray photoelectron spectroscopy, UV/Vis spectrophotometry, Raman spectroscopy, conductivity measurements, and cyclic voltammetry were used to characterize the resulting surfaces.     

Electrochemical Determination of Dextromethorphan on Reduced Graphene Oxide Modified Screen‐Printed Electrode after Electromembrane Extraction

In this paper, electromembrane extraction coupled with differential pulse voltammetry (DPV) on a reduced graphene oxide modified screen‐printed carbon electrode (RGO‐SPCE) for the determination of dextromethorphan (DXM) in urine and plasma has been described. DXM migrated from 4 mL of a donor phase across a thin layer of 2‐nitrophenyl octyl ether (NPOE) immobilized in the pores of a porous hollow fiber, into a 20 µL acceptor phase (HCl) present inside the lumen of the fiber. Then, 15 µL of a 0.1 M NaOH solution was added to the acceptor phase and the mixture was analyzed using DPV.     

Reduced Graphene Oxide|Carbon Ceramic Electrode Modified with CdS‐Hemoglobin as a Sensitive Hydrogen Peroxide Biosensor

A sensitive hydrogen peroxide (H₂O₂) biosensor was developed based on a reduced graphene oxide|carbon ceramic electrode (RGO|CCE) modified with cadmium sulfide‐hemoglobin (CdS‐Hb). The electron transfer kinetics of Hb were promoted due to the synergetic function of RGO and CdS nanoparticles. The transfer coefficient (α) and the heterogeneous electron transfer rate constant (k_s) were calculated to be 0.54 and 2.6 s^?1, respectively, indicating a great facilitation achieved in the electron transfer between Hb and the electrode surface. The biosensor showed a good linear response to the reduction of H₂O₂ over the concentration range of 2–240 µM with a detection limit of 0.24 µM (S/N=3) and a sensitivity of 1.056 µA µM^?1 cm^?2. The high surface coverage of the CdS‐Hb modified RGO|CCE (1.04×10^?8 mol cm^?2) and a smaller value of the apparent Michaelis? Menten constant (0.24 mM) confirmed excellent loading of Hb and high affinity of the biosensor for hydrogen peroxide.     

One‐Step Double Covalent Functionalization of Reduced Graphene Oxide with Xanthates and Peroxides

Radical functionalization of reduced graphene oxide has been achieved by reaction with a xanthate in the presence of peroxide as a radical initiator. X‐ray photoelectron spectroscopy, bulk elemental analyses, and thermogravimetric analyses showed that the xanthate grafting is covalent and efficient. The synthesis and use of seven xanthates and three peroxides showed that the highest grafting yield is obtained when xanthate and peroxide are introduced in stoichiometric amounts. It also revealed that the peroxide used as radical initiator is grafted at the graphenic surface during the functionalization. The method presented in this contribution therefore allows bifunctionalized reduced graphene oxide samples to be easily obtained in one single step. This method leads to undamaged graphene sheets with higher dispersibility than the pristine sample.     

Free‐Radical‐Promoted Conversion of Graphite Oxide into Chemically Modified Graphene

The preparation of chemically modified graphene (CMG) generally involves the reduction of graphite oxide (GO) by using various reducing reagents. Herein, we report a free‐radical‐promoted synthesis of CMG, which does not require any conventional reductant. We demonstrated that the phenyl free radical can efficiently promote the conversion of GO into CMG under mild conditions and produces phenyl‐functionalized CMG. This pseudo‐“reduction” process is attributed to a free‐radical‐mediated elimination of the surface‐attached oxygen‐containing functionalities. This work illustrates a new strategy for preparing CMG that is alternative to the conventional means of chemical reduction. Furthermore, the phenyl‐functionalized graphene shows an excellent performance as an electrode material for lithium‐battery applications.