Silica‐bonded S‐sulfonic Acid as a Recyclable Catalyst for Synthesis of 2,3‐Dihydroquinazolin‐4(1H)‐ones

2,3‐Dihydroquinazolin‐4(1H)‐one derivatives were synthesized via a one‐pot, three component reaction of isatoic anhydride and an aromatic aldehyde with ammonium acetate or primary amine catalyzed by silica‐bonded S‐sulfonic acid in ethanol at 80°C. The reaction work‐up is simple and the catalyst is easily separated from the products by filtration. The heterogeneous catalyst was recycled for ten runs upon the condensation reaction of isatoic anhydride and 4‐chlorobenzaldehyde with ammonium acetate without losing its catalytic activity.     

Synthesis of 2‐aryl‐1‐arylmethyl‐1H‐1,3‐benzimidazoles catalysed by ferric ammonium sulfate (NH4Fe(SO4)2) under solvent‐free conditions

NH₄Fe(SO₄)₂ was found to be a mild and effective catalyst for the selective synthesis of 2‐aryl‐1‐arylmethyl‐1H‐1,3‐benzimidazoles under solvent‐free conditions. Copyright © 2015 John Wiley & Sons, Ltd.     

Trans‐3,5‐dihydroperoxy‐3,5‐dimethyl‐1,2‐dioxalane/HBr System as New,Effective, Mild and Non‐toxic Reagent for Synthesis of 2‐Aryl‐1H‐benzothiazoles and 2‐Aryl‐1‐arylmethyl‐1H‐benzimidazoles

Ttrans‐3,5‐dihydroperoxy‐3,5‐dimethyl‐1,2‐dioxalane has been used as new, effective, solid, inexpensive and nontoxic oxidant for in situ generation of Br⁺ from HBr. This system has been applied as catalyst for synthesis of 2‐aryl‐1H‐benzothiazoles and 2‐aryl‐1‐arylmethyl‐1H‐benzimidazoles at room temperature in excellent yields and high purity.     

Preparation of Silica‐bonded Propyl‐diethylene‐triamine‐N‐sulfamic Acid as a Recyclable Catalyst for Chemoselective Synthesis of 1,1‐Diacetates

A simple and efficient procedure for the preparation of silica‐bonded propyl‐diethylene‐triamine‐N‐sulfamic acid (SPDTSA) by reaction of 3‐diethylenetriamine‐propylsilica (DTPS) and chlorosulfonic acid in chloroform is described. Silica‐bonded propyl‐diethylene‐triamine‐N‐sulfamic acid is employed as a recyclable catalyst for the synthesis of 1,1‐diacetates from aromatic aldehydes and acetic anhydride under mild and solvent‐free conditions at room temperature. Catalyst could be recycled for several times without any additional treatment.     

Selective Synthesis of 2‐Aryl‐1‐benzylated‐1H‐benzimidazoles

An efficient and simple procedure was developed for the green synthesis of various 2‐aryl‐1‐ben‐zylated‐1H‐benzimidazoles in high yields by condensation of o‐phenylenediamine with aldehydes with P₂O₅/SiO₂ as catalyst under solvent‐free and ambient conditions.     

HClO4‐SiO2: An Efficient and Useful Catalyst for the Synthesis of 3‐Aryl‐2H‐benzo[1,4]oxazine

HClO₄‐SiO₂, efficiently catalyzed the condensation of o‐aminophenols and 2‐bromo‐1‐aryl‐ethanones to yield 3‐aryl‐2H‐benzo[1,4]oxazines in good yields.     

Efficient Synthesis of 2‐Aryl‐1‐arylmethyl‐1H‐benzimidazoles in Ball Mill without Solvent

2‐Aryl‐1‐arylmethyl‐1H‐benzimidazoles were prepared in excellent yields by the condensation of o‐phenylenediamine with aldehydes under mechanically activated solvent‐free conditions in ball mill using FeCl₃·6H₂O as the catalyst.     

Synthesis of 4‐Arylisocoumarins (=4‐Aryl‐1H‐2‐benzopyran‐1‐ones) through Acidic Hydrolysis of (Z)‐2‐(1‐Aryl‐2‐methoxyethenyl)benzaldehydes,Followed by Oxidation

4‐Arylisocoumarins (=4‐aryl‐1H‐2‐benzopyran‐1‐ones) 6 were prepared from 2‐(1‐aryl‐2‐methoxyethenyl)‐1‐bromobenzenes 1 . Successive treatment of these bromo styrenes with BuLi and 1‐formylpiperidine gave a mixture of (E)‐ and (Z)‐2‐(1‐aryl‐2‐methoxyethenyl)benzaldehydes 2 . Hydrolysis of (Z)‐isomers with conc. HBr, followed by pyridinium chlorochromate (PCC) oxidation of the resulting 1H‐2‐benzopyran‐1‐ol derivatives 4 (and 5 ), afforded the desired products.     

Silica-bonded S-Sulfonic Acid: A Recyclable Catalyst for the Synthesis of Trisubstituted Imidazoles under Solvent-free Conditions

Trisubstituted imidazoles have been synthesized in high yields in the presence of silica‐bonded S‐sulfonic acid as a catalyst. The reaction was carried out at 130°C under solvent‐free conditions. The reaction work‐up is simple and the catalyst is easily separated from the products by filtration.     

Synthesis of 2‐Aryl‐2,3‐dihydro‐3‐sulfanyl‐1H‐isoindol‐1‐ones by Pummerer‐Type Cyclization of N‐Aryl‐2‐(sulfinylmethyl)benzamides

An efficient method for the synthesis of 2‐aryl‐2,3‐dihydro‐3‐sulfanyl‐1H‐isoindol‐1‐ones 1 via Pummerer‐type cyclization of N‐aryl‐2‐(sulfinylmethyl)benzamides 2 is described. Thus, treatment of these sulfinyl‐benzamides 2 , easily prepared from 2‐(bromomethyl)benzoates 3 in three steps, with Ac₂O at ca. 100° resulted in the formation of the desired isoindolones 1 in generally good yields.     

Melamine Trisulfunic Acid: An Efficient and Recyclable Solid Acid Catalyst for the Synthesis of 4,4′‐(Arylmethylene)‐bis‐(1H‐pyrazol‐5‐ols)

Melamine trisulfunic acid is employed as a recyclable catalyst for the condensation reaction of aromatic aldehydes with 3‐methyl‐l‐phenyl‐2‐pyrazolin‐5‐one. This condensation reaction was performed in ethanol under refluxing conditions giving 4,4′‐(arylmethylene)‐bis‐(3‐methyl‐1‐phenyl‐1H‐pyrazol‐5‐ols) in 80‐96% yields.     

Synthesis of 3‐Aryl‐2‐methoxyinden‐1‐one (Z)‐Phenylhydrazones via Hydrobromic Acid‐Mediated Cyclization of 2‐(1‐Aryl‐2‐methoxyethenyl)benzaldehyde Phenylhydrazones

2‐(1‐Aryl‐2‐methoxyethenyl)benzaldehydes 2 , obtained by successive treatment of 1‐(1‐aryl‐2‐methoxyethenyl)‐2‐bromobenzenes 1 with BuLi and 1‐formylpiperidine, were transformed to the corresponding phenylhydrazones 3 on treatment with PhNHNH₂. When these hydrazones were allowed to react with conc. HBr, cyclization, followed by dehydrogenation with air occurred, furnished 3‐aryl‐2‐methoxyinden‐1‐one (Z)‐phenylhydrazones 4 .     

Facile One‐Pot Synthesis of Monosubstituted 1‐Aryl‐1H‐1,2,3‐triazoles from Arylboronic Acids and Prop‐2‐ynoic Acid (=Propiolic Acid) or Calcium Acetylide (=Calcium Carbide) as Acetylene Source

The synthesis of monosubstituted 1‐aryl‐1H‐1,2,3‐triazoles was achieved in a one‐pot reaction from arylboronic acids and prop‐2‐ynoic acid or calcium acetylide (=calcium carbide), respectively, as a source of acetylene, with yields ranging from moderate to excellent (Scheme 1, Table 2). The reaction conditions were successfully applied to arylboronic acids, including analogs with various functionalities. Unexpectedly, the 1,2,3‐triazole moiety promoted a regioselective hydrodebromination (Scheme 2).     

Metal Derivatives of Heterocyclic Thioamides: Synthesis and Crystal Structures of Copper Complexes with 1‐Methyl‐1,3‐imidazoline‐2‐thione and 1,3‐Imidazoline‐2‐thione

Reactions of copper(I) halides (Cl, Br, I) with 1‐methyl‐1, 3‐imidazoline‐2‐thione (mimzSH) in 1 : 2 molar ratio yielded sulfur‐bridged dinuclear [Cu₂X₂(μ‐S‐mimzSH)₂(η¹‐S‐mimzSH)₂] (X = I, 1 , Br, 2 ; Cl, 3 ) complexes. Copper(I) iodide with 1,3‐imidazoline‐2‐thione (imzSH₂) and Ph₃P in 1 : 1 : 1 molar ratio has also formed a sulfur‐bridged dinuclear [Cu₂I₂(μ‐S‐imzSH₂)₂(PPh₃)₂] ( 4 ) complex. The central Cu(μ‐S)₂Cu cores form parallelograms with unequal Cu–S bond distances {2.324(2), 2.454(3) Å} ( 1 ); {2.3118(6), 2.5098(6) Å} ( 2 ); {2.3075(4), 2.5218(4) Å} ( 3 ); {2.3711(8), 2.4473(8) Å} ( 4 ). The Cu···Cu separations, 2.759–2.877Å in complexes 1 – 3 are much shorter than 3.3446Å in complex 4 . The weak intermolecular interactions {H₂CH···S^# ( 2 ); CH···Cl^# ( 3 ); NH···I^# ( 4 )} between dimeric units in complexes 2 – 4 lead to the formation of linear 1D polymers.     

Zn3(BTC)2 as a Highly Efficient Reusable Catalyst for the Synthesis of 2‐Aryl‐1H‐Benzimidazole

Zn₃(BTC)₂ metal‐organic frameworks as recyclable and heterogeneous catalysts were effectively used to catalyze the synthesis of benzimidazole derivatives from o‐phenylendiamine and aldehydes in ethanol. This method provides 2‐aryl‐1H‐benzimidazoles in good to excellent yields with little catalyst loading. The catalyst was characterized using different techniques such as X‐ray diffraction (XRD), energy dispersive X‐ray (EDX) analysis, scanning electron microscopy (SEM), and Fourier transform infrared (FT‐IR) spectroscopy.     

Xanthan Sulfuric Acid: An Efficient Bio‐supported and Recyclable Solid Acid Catalyst for the Synthesis of 2‐Aryl Thiadiazolo Benzimidazoles

Xanthan sulfuric acid is an efficient solid acid catalyst for the preparation of 2‐aryl benzimidazoles in excellent yields. This method is applicable for the reaction of benzo[c][1,2,5]thiadiazole‐4,5‐diamine with aldehydes by simple physical grinding at room temperature. The salient features of the present methodology is cheaper process, easy synthesis of stable catalyst and the catalyst can be easily recycled without significant loss of activity.     

A New Voltammetric Sensor for Hydrazine Based on Michael Addition Reaction Using 1‐Amino‐2‐naphtol‐4‐sulfonic Acid

In this paper, voltammetric determination of hydrazine was investigated by 1‐amino‐2‐naphtol‐4‐sulfonic acid (ANSA) at the surface of carbon paste electrode (CPE) using cyclic voltammetry (CV) and double potential step chronoamperometry. Results showed that in pH 7.00, hydrazine participates in Michael addition reaction with ANSA and the anodic peak potential of hydrazine shifted to 726 mV less positive than CPE in absence of ANSA, this value is unique compared with other research works. Also, the value of rate constant for the oxidation of hydrazine was calculated 8.3 × 10⁴ cm³ mol^‐1 s^‐1 and the diffusion coefficient of ANSA at the surface of CPE was determined 7.3 × 10^‐7 cm² s^‐1. A linear correlation between Ip and hydrazine concentration in the ranges, from 5 × 10^‐5 mol/L to 2.5 × 10^‐2 mol/L with CV method was obtained and the detection limit was found as 4.3 × 10^‐5 mol/L.     

An Efficient Synthesis of 3H‐1,5‐Benzodiazepine Derivatives Catalyzed by Heteropolyacids as a Heterogeneous Recyclable Catalyst

3H‐1,5‐benzodiazepines were synthesized by the condensation of o‐phenylendiamine and various 1,3‐diketones in the presence of various heteropolyacid (HPA) catalysts under mild conditions in very good yields and with high selectivity.     

One-Pot Synthesis of Dihydropyrimidine-Thione Derivatives Using Tungstate Sulfuric Acid (TSA) as a Recyclable Catalyst

Abstract

An efficient, simple, and environmentally benign procedure for the one-pot synthesis of 3,4-dihydropyrimidine-2-(1H) thione derivatives that entails the three-component condensation of appropriate aryl aldehydes, β-dicarbonyls, and thiourea in the presence of catalytic amount of tungstate sulfuric acid under solvent-free conditions was reported. This method has many advantages including excellent yields, short reaction time, and simple work-up procedure.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements for the following free supplemental resource: 1H, 13C NMR and Mass Spectra for 5b, 5g, 5j, 5i, 5l (S2-S16). Additional Characterization Data (S17-18).     

Cobalt manganese oxide nanoparticles as recyclable catalyst for efficient synthesis of 2‐aryl‐1‐arylmethyl‐1H‐1,3‐benzimidazoles under solvent‐free conditions

Cobalt manganese oxide nanocatalyst was synthesized and it was found that it is a highly efficient green catalyst for the synthesis of 2‐aryl‐1‐arylmethyl‐1H‐1,3‐benzimidazoles under solvent‐free conditions. The marked advantages of this method are the simple experimental procedures, shorter reaction times, high yields of product, reusable and non‐toxic catalyst and solvent‐free conditions. Copyright © 2015 John Wiley & Sons, Ltd.