Determination of cystine and cysteine in seawater using cathodic stripping voltammetry in the presence of Cu(II)

A method is described for the determination of cystine and cysteine in seawater and freshwater using cathodic stripping voltammetry in the presence of added copper(II). The optimized conditions include a copper concentration of 150 nM, a pH of 8.5, and a collection potential of −0.15 V; the cathodic reduction peak is located at −0.55 V. The detection limit is 0.1 nM after a collection period of 4 min. The sensitivity is diminished by surfactants similar to Triton X-100 in natural waters; the sensitivity therefore needs to be calibrated by internal standard additions of amino acids. It is possible to differentiate between cystine and cysteine by employing a solution pH of 6.2, where the peak due to cystine is absent. The response in seawater is different from that previously reported in buffer solutions. It is shown that the amino acid reduction peak is due to Cu(I) reduction of the adsorbed Cu(I)-cysteinate complex; this complex is formed with Cu(I) generated from dissolved copper(II) at the electrode surface at −0.15 V in the presence of cysteine; cystine is reduced to cysteine at the electrode surface during the collection process.     

Selective Electrochemical Analysis of Various Metal Ions at an EDTA Bonded Conducting Polymer Modified Electrode

An EDTA‐bonded conducting polymer modified electrode was prepared and characterized by FT‐IR. The modified electrode was used for the selective electrochemical analysis of various trace metal ions such as, Cu(II), Hg(II), Pb(II), Co(II), Ni(II), Fe(II), Cd(II), and Zn(II) at the different pHs by linear sweep and square wave voltammetry. Dynamic ranges were obtained using square wave voltammetry from 0.1 μM to 10.0 μM for Co(II), Ni(II), Cd(II), Fe(II), and Zn(II) and 0.5 nM to 20 nM for Cu(II), Hg(II), and Pb(II) after 10 min of preconcentration. The detection limits were determined to be 0.1 nM, 0.3 nM, 0.4 nM, 50.0 nM, 60.0 nM, 65.0 nM, 80.0 nM, and 90.0 nM for Cu(II), Hg(II), Pb(II), Co(II), Ni(II), Cd(II), Fe(II), and Zn(II), respectively. The technique offers an excellent way for the selective trace determination of various heavy metal ions in a solution.     

Synthesis,characterization, equilibrium studies,and biological activity of complexes involving copper(II), 2-aminomethylthiophenyl-4-bromosalicylaldehyde Schiff base,and selected amino acids

Ternary complexes of copper(II) with 2-aminomethylthiophenyl-4-bromosalicylaldehyde (ATS) and some amino acids have been isolated and characterized by elemental analyses, IR, magnetic moment, molar conductance, UV–vis, mass spectra, and ESR. The proposed general formulas of the prepared complexes are [Cu(ATS)(AA)]·nH₂O (where AA?=?glycine, alanine, and valine). The low molar conductance values suggest the non-electrolytic nature of the complexes. IR spectra show that ATS is coordinated to copper in a bidentate manner through azomethine-N and phenolic-OH. The amino acids also are monobasic bidentate ligands via amino and ionized carboxylate groups. The magnetic and spectral data indicate the square-planar geometry of Cu(II) complexes. The geometry of the Cu(II) complexes has been fully optimized using parameterized PM3 semiempirical method. The Cu–N bond length is longer than that of Cu–O in the isolated complexes. Also, information is obtained from calculations of molecular parameters for all complexes including net dipole moment of the metal complexes, values of binding energy, and lipophilicity value (log P). The antimicrobial activity studies indicate significant inhibitory activity of complex 3 against the selected types of bacteria. The mixed ligand complexes have also been studied in solution state. Protonation constants of ATS and amino acids were determined by potentiometric titration in 50% (v/v) DMSO–water solution at ionic strength of 0.1?M NaCl. ATS has two protonation constants. The binary and ternary complexes of copper(II) involving ATS and some selected amino acids (glycine, alanine, and valine) were examined. Copper(II) forms [Cu(ATS)], [Cu(ATS)₂], [Cu(AA)], [Cu(AA)₂], and [Cu(ATS)(AA)] complexes. The ternary complexes are formed in a simultaneous mechanism.     

Pt‐Nanoparticle Incorporated Carbon Paste Electrode for the Determination of Cu(II) Ion by Anodic Stripping Voltammetry

Pt‐nanoparticles were synthesized and introduced into a carbon paste electrode (CPE), and the resulting modified electrode was applied to the anodic stripping voltammetry of copper(II) ions. The synthesized Pt‐nanoparticles were characterized by cyclic voltammetry, scanning electron microscopy and X‐ray photoelectron spectroscopy techniques to confirm the purity and the size of the prepared Pt‐nanoparticles (ca. 20 nm). This incorporated material seems to act as catalysts with preconcentration sites for copper(II) species that enhances the sensitivity of Cu(II) ions to Cu(I) species at a deposition potential of ?0.6 V in an aqueous solution. The experimental conditions, such as, the electrode composition, pH of the solution, pre‐concentration time, were optimized for the determination of Cu(II) ion using as‐prepared electrode. The sensitivity changes on the different binder materials and the presence of surfactants in the test solution. The interference effect of the coexisted metals were also investigated. In the presence of surfactants, especially TritonX‐100, the Cu(II) detection limit was lowered to 3.9×10^?9 M. However, the Pt‐nanoparticle modified CPE begins to degrade when the period of deposition exceeds to 10 min. Linear response for copper(II) was found in the concentration range between 3.9×10^?8 M and 1.6×10^?6 M, with an estimated detection limit of 1.6×10^?8 M (1.0 ppb) and relative standard deviation was 4.2% (n=5).     

Microbalance study of gold dissolution in alkaline sulfite-thiocarbamide electrolytes

It is shown that gold does not virtually dissolve in alkaline (pH 12.5) solutions containing either thiocarbamide or sodium sulfite. Gold dissolves in alkaline solutions simultaneously containing thiocarbamide (0.1 M) and sodium sulfite (0.5 M). The gold dissolution rate increases with the increase in the contents of thiocarbamide and sodium sulfite. The methods of microbalance and voltammetry are used in studying the mechanism of gold dissolution in a solution containing 0.5 M sodium sulfite, 0.1 M thiocarbamide, and 0.03 M KOH. The found relationships are explained based on the assumption that the gold dissolution in alkaline sulfite-thiocarbamide electrolytes affords gold sulfite complexes.     

Nickel-titanium alloy electrodes for stable amperometric detection of underivatized amino acids in anion-exchange chromatography

Nickel-titanium (Ni-Ti) alloy electrode was used as an electrochemical detector for the analysis of underivatized amino acids in flow systems. In strong alkaline solution, an oxide film on the Ni-Ti alloy electrode surface exhibited a high catalytic activity toward the oxidation of amino acids. Cyclic voltammetry experiments confirmed that electrogenerated Ni(III)O(OH) functioned as the key redox mediator associated with the oxidation of the amine group in amino acids. The electrochemical behavior of the Ni-Ti electrode in alkaline medium was very similar to the Ni electrode. However, the oxide film was found to be much stable on Ni-Ti than on Ni. Consequently, the Ni-Ti alloy electrode exhibited an excellent stability for constant-potential amperometric detection of amino acids in flow systems. For example, the relative standard deviation (R.S.D.) for the repetitive 100 injections of 50 muM (1.2 nmol) glycine over 10 h was less than 1%. It was postulated that the presence of Ti in the alloy stabilizes the microstructure of oxide layer on the electrode surface. The sensitivities of amino acids at the electrode were different, depending on their chemical structures. The detection limits obtained in a range from 0.9 pmol for arginine to 90.2 pmol for leucine and isoleucine. The Ni-Ti alloy electrodes have been demonstrated to be very suitable for the amperometric detection of underivatized amino acids in anion-exchange chromatography.     

Copper(II) complexes of imino-bis(methyl phosphonic acid) with some bio-relevant ligands. Equilibrium studies and hydrolysis of glycine methyl ester through complex formation

Binary and ternary complexes of Cu(II) involving imino-bis(methyl phosphonic acid) (IdP) abbreviated as H₄A and some selected bio-ligands, amino acids, peptides and DNA constituents (L), were examined. Cu(II) forms CuA and CuAH complexes with IdP. Ternary complexes are formed in a stepwise mechanism whereby iminodiphosphonic acid binds to Cu(II), followed by coordination of amino acid, peptide or DNA. The concentration distribution of the various complex species has been evaluated. The kinetics of base hydrolysis of glycine methyl ester in the presence of Cu(II)-IdP was studied in aqueous solution at different temperatures, and in dioxane-water solutions of different compositions at 25°C. The activation parameters are evaluated and discussed.     

The effect of Cu(II) ions on dopaquinone cyclization

The kinetics of the dopaquinone cyclization in the absence and presence of Cu(II) ions at pHs from 6 to 7.4 has been studied by cyclic, normal and reverse pulse voltammetry. Distinct inhibition of the dopaquinone ring closure reaction was observed in the. presence of Cu(II) ions. At pHs below 6 this effect is attributed to the formation of amino acid type complexes. At pH 7.4 the amino acid type and the catechol type Cu(II)-DOPA chelates coexist, and simultaneous interactions of copper ions with both ends of the DOPA molecule result in the association of the Cu(II)-DOPA complexes. These effects, observed at physiological pH, suggest that the rate of melanin formation is affected by the presence of Cu(II) ions.     

Electrometric Studies on the Ternary Complexes of M(II) With Chlorpromazine and Some Amino Acids

 The stability constants for the binary M(II)- chlorpromazine hydrochloride (CPZ) and the ternary complexes M(II)-chlorpromazine-amino acid, have been studied using pH-measurements. The amino acids (aa) are: glycine, glutamic acid, histidine and the metal ions are: Cu(II), Zn(II), Co(II), Ni(II) and UO₂(II). All experiments were carried out in the presence of 0.1 mol dm⁻³ KNO₃. The resulting stability constants of the binary and the ternary complexes were compared. It was observed that the stability of the ternary complexes-except for glutamic acid – are lower than of the binary ones. Received October 22, 1998. Revision March 14, 1999.     

Single step modification of copper electrode for the highly sensitive and selective non-enzymatic determination of glucose

A non-enzymatic sensor was developed for the determination of glucose in alkaline medium by anodisation of copper in sodium potassium tartrate solution. The morphology of the modified copper electrode was studied by scanning electron microscopy, and its electrochemical behavior by cyclic voltammetry and electrochemical impedance spectroscopy. The electrode enables direct electrocatalytic oxidation of glucose on a CuO/Cu electrode at 0.7 V in 0.1 M sodium hydroxide. At this potential, the sensor is highly selective to glucose even in the presence of ascorbic acid, uric acid, or dopamine which are common interfering species. The sensor displays a sensitivity of 761.9 μA mM^?1 cm^?2, a linear detection range from 2 μM to 20 mM, a response time of <1 s, and a detection limit of 1 μM (S/N = 3). It was tested for determination of glucose level in blood serum.     

Copper oxides: kinetics of formation and semiconducting properties. Part I. Polycrystalline copper and copper-gold alloys

The anodic formation of Cu(I) and Cu(II) oxides on polycrystalline copper and copper-gold alloys (4 and 15 at% Au) in deoxygenated 0.1 M KOH was examined by voltammetry, chronoamperometry, and chronopotentiometry with a synchronous registration of photocurrent and photopotential, in situ spectroscopy of photocurrent as well as XPS and SEM measurements. The band gap of p-Cu₂O is 2.2 eV for indirect optical transitions independent of the concentration of gold in Cu-Au alloy. It grows on CuOH or n-Cu₂O underlayer. The increase of anodic potential results in a thickening of oxide film which is a mixture of Cu(I) and Cu(II) oxides. The latter is a p-type semiconductor with a low photosensitivity. The rate of oxide formation on the alloys is lower than on copper. The structure-dependent properties of the oxide phase on the alloys and copper are different. Copper is prone to corrosive oxidation even in deoxygenated alkaline solution by the traces of molecular oxygen. The corrosive growth of Cu(I) oxide film occurs according to the parabolic law. After the cathodic polarization, the surface of copper remains free of corrosive oxide no longer than 15–20 min. The preliminary anodic formation even of a thin Cu₂O film as well as the alloying of copper with gold suppresses the corrosive oxidation of copper.     

Determination of heavy metals and iodide by stripping voltammetry in sodium chloride on mercury-graphite electrodes

The behavior of Cd(II), Pb(II), Cu(II), and I⁻ in the aqueous solutions of sodium chloride is studied by stripping voltammetry. A new version of using an indicator electrode from carbon glass ceramics modified with mercury for the consecutive stripping determination of Cd(II), Pb(II), Cu(II), and iodide is proposed. The mercury-graphite electrode was formed in the solution of a supporting electrolyte based on NH₄Cl, HCl, 0.05 M potassium tetraoxalate (KH₃C₄O₃ · 2H₂O), and 5 × 10⁻⁵ M mercury(II). At first, Cd(II), Pb(II), Cu(II), and then iodide were determined by anodic-cathodic stripping voltammetry after adding a sample solution (table salt, 10–100 mg/mL NaCl).     

Nickel/Poly(o‐aminophenol) Film Prepared in Presence of Sodium Dodecyl Sulfate: Application for Electrocatalytic Oxidation of Carbohydrates

Poly(o‐aminophenol) (POAP) was formed by successive cyclic voltammetry in monomer solution in the presence of sodium dodecyl sulfate (SDS) on the surface of a carbon paste electrode (CPE). Ni(II) ions were incorporated into the electrode by immersion of the polymeric modified electrode having amine groups in 0.1 M Ni(II) ion solution. Electrochemical study of this modified electrode shows a good redox behavior of the Ni(III)/Ni(II) couple. The electrocatalytic oxidations of glucose and other carbohydrates at the surface of the Ni/SDS‐POAP/CPE were studied in a 0.1 M NaOH solution. Compared to POAP/CPE, the SDS‐POAP/CPE significantly enhanced the catalytic efficiency of Ni ions for carbohydrates oxidation. Finally, using chronoamperometric method, the catalytic rate constants (k) for carbohydrates were calculated.     

Modulating the M-M distance in dinuclear complexes. New ligand with a 2,2'-Biphenol fragment as key unit: synthesis, coordination behavior, and crystal structures of Cu(II) and Zn(II) dinuclear complexes

The synthesis and characterization of the new polyamino-phenolic ligand 3,3'-bis[N,N-bis(2-aminoethyl)aminomethyl]-2,2'-dihydroxybiphenyl (L) are reported. L contains two diethylenetriamine units linked by a 1,1'-bis(2-phenol) group (BPH) on the central nitrogen atom which allows two separate binding amino subunits in a noncyclic ligand. The basicity and binding properties of L toward Cu(II) and Zn(II) were determined by means of potentiometric measurements in aqueous solution (298.1 +/- 0.1 K, I = 0.15 mol dm-3). L behaves as a pentaprotic base and as a monoprotic acid under the experimental conditions used, yielding the H5L5+ or H-1L- species, respectively. L forms both mono- and dinuclear species with both metal ions investigated; the dinuclear species are largely prevalent in aqueous solution with a L/M(II) molar ratio of 1:2 at pH higher than 7. L shows different behavior in Cu(II) and Zn(II) binding, affecting the dinuclear species formed and the distance between the two coordinated metal ions, which is greater in the Zn(II) than in the Cu(II) dinuclear species. This difference can be attributed to the different degree of protonation of BPH which influences the angle between the phenyl rings in the two systems. In this way, it is possible to modulate the M(II)-M(II) distance by the choice M(II) and to space the two M(II) farther away than was possible with the previously synthesized ligands. L does not saturate the coordination sphere of the coordinated M(II) ions in the dinuclear species, and thus, these latter species are prone to add guests. 1H and 13C NMR experiments carried out in aqueous solution, as well as the crystal structures of the dinuclear Cu(II) and Zn(II) species formed in aqueous solution, aided in elucidating the involvement of L and BPH in Zn(II) and Cu(II) stabilization.     

A New Kinetic‐Mechanistic Approach to Elucidate Formaldehyde Electrooxidation on Copper Electrode

Electrocatalytic oxidation of formaldehyde was investigated on copper electrode in alkaline solution. The process of oxidation involved and its kinetics were established by using cyclic voltammetry, chronoamperometry as well as steady state polarization measurements. In cyclic voltammetry (CV) studies, in the presence of formaldehyde the peak current increase of the oxidation of Cu(III) is followed by a decrease in the corresponding cathodic current. A new mechanism based on the electrochemical generation of Cu(III) active sites and their subsequent consumption by the formaldehyde in question was also investigated.     

A facile and sensitive chemiluminescence detection of amino acids in biological samples after capillary electrophoretic separation

It was found that native amino acids enhanced the chemiluminescence (CL) reaction between luminol and BrO(-) in an alkaline aqueous solution. This has led to the development of a facile and highly sensitive CL detection scheme for the determination of amino acids in biological samples after capillary electrophoretic (CE) separation. The CE-CL conditions were optimized. An electrophoretic buffer of 2.5 x 10(-2) M sodium borate (pH 9.4) containing 1 x 10(-4) M luminol was used. The oxidizer solution of 8 x 10(-4) M NaBrO in 0.1 M sodium carbonate buffer solution (pH 12.5) was introduced post-column. Under the optimal conditions, the detection limits were 1.0 x 10(-7) M for glutamic acid (Glu) and 1.3 x 10(-7) M (S/N = 3) for aspartic acid (Asp). The relative standard deviations (RSDs) of peak area and migration time were in the ranges of 3.8-4.3% and 1.4-1.6%, respectively. The present method was applied to the determination of excitatory amino acids (i.e., Asp and Glu) in rat brain tissue and monkey plasma. The levels of these major excitatory amino acids in monkey plasma were quantified for the first time and found to be 1.17 +/- 0.17 x 10(-5) M (mean +/- SD, n = 6) for Glu and 1.64 +/- 0.19 x 10(-6) M for Asp, which were comparable with the levels in human plasma.     

Electropolymerization of N,N-dimethylaniline in presence of sodium dodecyl sulfate and its electrochemical properties

Poly(N,N-dimethylaniline) (PDMA) was formed by successive cyclic voltammetry in monomer solution in the presence of sodium dodecyl sulfate (SDS) on the surface of a carbon paste electrode. The polymerization behavior of N,N-dimethylaniline in the presence of SDS is quite different from that of N,N-dimethylaniline in the absence of SDS. The effect of varying amount of SDS on the rate of polymerization of N,N-dimethylaniline was investigated. The electrochemical behavior of the SDS-PDMA carbon paste electrode has been investigated by cyclic voltammetry in 0.5 M H₂SO₄ and 5 mM K₄[Fe(CN)₆]/0.1 M KCl solutions as the supporting electrolyte and model system, respectively. The synthesized PDMA was characterized by FT-IR and scanning electron microscopy (SEM). Ni(II) ions were incorporated into the electrode by immersion of the polymeric modified electrode having amine groups in 0.1 M Ni(II) ion solution. The electro catalytic oxidations of methanol at the surface of the Ni/SDS-PDMA electrode were studied in a 0.1 M NaOH solution. Compared to bare carbon paste and PDMA-modified carbon paste electrodes; the SDS-PDMA electrode significantly enhanced the catalytic efficiency of Ni ions for methanol oxidation.     

A novel and low cost electrochemical sensor for ceftazidime and cefazoline as antibiotic drugs based on nickel/SDS-poly(o-aminophenol) modified electrode

Poly(o-aminophenol) (POAP) was formed by successive cyclic voltammetry in monomer solution in the presence of sodium dodecyl sulfate (SDS) on the surface of a carbon paste electrode (CPE). Ni(II) ions were incorporated into the electrode by immersion of the polymeric modified electrode having amine groups in 0.1 M Ni(II) ion solution. Electrochemical study of this modified electrode shows a good redox behavior of the Ni(III)/Ni(II) couple. The electrocatalytic oxidations of ceftazidim and cefazolin at the surface of the Ni/SDS-POAP/CPE were studied in a 0.1 M NaOH solution. Finally, using chronoamperometric method, the catalytic rate constants (k) for ceftazidim and cefazolin were calculated. Electrode was successfully applied for determination of ceftazidim and cefazolin in pharmaceutical preparations.     

Coulometric determination of lead(II) and lead(IV) in high-T c superconductors containing copper and bismuth

The behavior of Pb(II) and Pb(IV) was studied by voltammetry in supporting electrolytes containing 0.1 M NaOH or 0.1 M NaOH + 0.1 M Na₃Cit at a graphite and a mercury thin-film electrodes. The best conditions were found for the coulometric determination of Pb by the oxidation of Pb(0) to Pb(II) in the presence of 5- to 20-fold amounts of Bi(III) and Cu(II) within the range 0.2–2 mg Pb(II) with an error and a relative standard deviation of less than 0.5%. Along with the procedure proposed previously for the determination of Pb(II) and Pb(IV) present simultaneously using a platinum gauze electrode, this procedure was applied to the determination of Pb(II) and Pb(IV) in samples of high-T_c. Cu-Bi superconductors. For samples of high-T_c. Bi-Pb-A-Cu-0 superconductors (A = Ba or Sr-Ca) containing from 2 to 12% Pb(II), the relative standard deviation was less than 0.5%; for 0.6–7% Pb(IV), it was 1-0.2%.     

Copper Sensing in Alkaline Electrolyte Using Anodic Stripping Voltammetry by Means of a Lead Mediator

Anodic stripping voltammetry (ASV) is an analysis technique that permits the selective and quantitative analysis of metal ion species in solution. It is most commonly applied in neutral to acidic electrolyte largely due to inherent metal ion solubility. Bismuth (Bi) is a common film used for ASV due to its good sensitivity, overall stability and insensitivity to O₂. ASV, utilizing a Bi film, along with cadmium (Cd) and lead (Pb) as the plating mediators, has recently been adapted to determine zinc (Zn) concentrations in highly alkaline environments (30 % NaOH or 35 % M KOH). Successful analysis of Zn in alkaline relies on the ability of the hydroxide to form soluble metal anion species, such as Bi(OH)₄⁻ and Zn(OH)₄²⁻. Here, we look to extend this technique to detect and quantify copper (Cu) ions in these highly basic electrolytes. However, in general, the use of ASV to detect and quantify Cu ion concentrations is notoriously difficult as the Cu stripping peak potential overlays with that of Bi from the common Bi film electrode. Here, an ASV method for determining Cu concentration in alkaline solutions is developed utilizing Pb as a deposition mediator. As such, it was found that when analyzing Cu solutions in the presence of Pb, the stripping voltammetry curves present separate and defined Cu stripping peaks. Different analyzes were made to find the best stripping voltammetry performance conditions. As such, an accumulation time of 5 minutes, an accumulation potential of≤−1.45 V vs. Hg/HgO, and a concentration of 35 wt% KOH were determined to be the conditions that presented the best ASV results. Utilizing these conditions, calibration curves in the presence of 5.0 ppm Pb showed the best linear stripping signal correlation with an r‐squared value of 0.991 and a limit of detection (LOD) of 0.67 ppm. These results give way to evaluating Cu concentrations using ASV in aqueous alkaline solutions.