Low-temperature reduction of silver(I) oxide particles with long chain alcohol

The mechanism of reducing silver(I) oxide particles to silver metals was studied using myristyl alcohol as a reducing agent. The reduction temperature of silver oxide with myristyl alcohol decreased to 150 °C from the temperature of silver oxide in air, 400 °C. The reduction temperature was decreased by myristyl alcohol reacting with silver oxide, which was confirmed by our reaction equation model obtained by gas chromatography determination, pyrolysis gas chromatography–mass spectrometry, and Karl Fischer titration. An endothermic of 153.7 kJ mol^?1 in the reduction of silver oxide with myristyl alcohol calculated from the reaction model using Hess’s law was coincident with that obtained experimentally by differential scanning calorimetry measurements.     

Curing and properties of chloroprene and butadiene rubber (CR/BR) blends cross-linked with copper(I) oxide or copper(II) oxide

This paper discusses the curing and properties of chloroprene and butadiene rubber (CR/BR) blends cross-linked with copper(I) oxide (Cu₂O) or copper(II) oxide (CuO). The results revealed that the cross-linking degree of CR/BR blends decreased with the increasing amount of butadiene rubber (BR) in the blends. The mechanical properties of cured CR/BR blends depended on the proportion of elastomers in blends, as well as on the type and amount of the cross-linking agent (Cu₂O, CuO). The cross-linking of CR/BR/Cu₂O or CR/BR/CuO blends followed according to cationic mechanism, using Lewis acid, copper(I) chloride (CuCl) or copper(II) chloride (CuCl₂) generated in situ. Additionally, the prepared compositions, both unfilled and filled, were characterized by very high resistance to flame.     

Systematic investigations of the multi-element preconcentration from copper by precipitation of the matrix as copper(I) oxide and copper(I) thiocyanate

Two methods for multi-element preconcentration from copper by reductive matrix precipitation are presented. In systematic investigations on the coprecipitation behaviour of Ag, Al, Au, Bi, Cd, Co, Cr, Fe, Ga, In, Mn, Mo, NJ, Pb, Sb, Se, Sn, Te and Zn during precipitation of the copper matrix as Cu₂O or CuSCN, the separation parameters were optimized. By combination with a hexamethyleneammonium hexamethylenedithiocarbamate collector precipitation, a concentration of 8 elements (Cu₂O precipitation) or 13 elements (CuSCN precipitation) in a small volume was achieved. The limits of detection of the procedures are, depending on the element, 0.1–5 μg g^?1 for flame atomic absorption spectrometry (AAS) and 0.01–0.1 μg g^?1 for graphite furnace AAS. The relative standard deviations are about 3%. The analytical performance of the procedures is compared with that of an electrolytic copper separation.     

Dinuclear copper(I) and copper(I)/silver(I) complexes with condensed dithiolato ligands

The Cu(III) complex Pr 4N[Cu{S 2C=( t-Bu-fy)} 2] ( 1) ( t-Bu-fy = 2,7-di- tert-butylfluoren-9-ylidene) reacts with [Cu(PR 3) 4]ClO 4 in 1:1 molar ratio in MeCN to give the dinuclear complexes [Cu 2{[SC=( t-Bu-fy)] 2S}(PR 3) n ] [ n = 2, R = Ph ( 2a); n = 3, R = To ( 3b); To = p-tolyl]. The analogue of 2a with R = To ( 2b) can be obtained from the reaction of 3b with 1/8 equiv of S 8. Compound 2b establishes a thioketene-exchange equilibrium in solution leading to the formation of [Cu 4{S 2C=( t-Bu-fy)} 2(PTo 3) 4] ( 4b) and [Cu 2{[SC=( t-Bu-fy)] 3S}(PTo 3) 2] ( 5b). Solid mixtures of 4b and 5b in varying proportions can be obtained when the precipitation of 2b is attempted using MeCN. The reactions of 1 with AgClO 4 and PPh 3, PTo 3 or PCy 3 in 1:1:4 molar ratio in MeCN afford the heterodinuclear complexes [AgCu{[SC=( t-Bu-fy)] 2S}(PR 3) 3] [R = Ph ( 6a), To ( 6b), Cy ( 6c)]. Complex 6c dissociates PCy 3 in solution to give the bis(phosphine) derivative [AgCu{[SC=( t-Bu-fy)] 2S}(PCy 3) 2] ( 7c), which undergoes the exchange of [M(PCy 3)] (+) units in CD 2Cl 2 solution to give small amounts of [Cu 2{[SC=( t-Bu-fy)] 2S}(PCy 3) 2] ( 2c) and [Ag 2{[SC=( t-Bu-fy)] 2S}(PCy 3) 2] ( 8c). Complexes 6a and b participate in a series of successive equilibria in solution, involving the dissociation of phosphine ligands and the exchange of [M(PCy 3)] (+) units to give 2a or 3b and the corresponding disilver derivatives [Ag 2{[SC=( t-Bu-fy)] 2S}(PR 3) 2] [R = Ph ( 8a), To ( 8b)], followed by thioketene-exchange reactions to give [AgCu{[SC=( t-Bu-fy)] 3S}(PR 3) 2] [R = Ph ( 9a), To ( 9b)]. Complexes 9a and b can be directly prepared from the reactions of 1 with AgClO 4 and PPh 3 or PTo 3 in 1:1:3 molar ratio in THF. The crystal structures of 3b, 6b, 6c, 7c, and 9a have been solved by single-crystal X-ray diffraction studies and, in the cases of 7c and 9a, reveal the formation of short Ag...Cu metallophilic contacts of 2.8157(4) and 2.9606(6) A, respectively.     

Interactions of inorganic salts with poly(ethylene oxide)

Evidence is presented for the interaction of metal salts such as potassium iodide with polyethers such as poly(ethylene oxide). This interaction is sufficiently marked that the incorporation of 10–30% of the salt in the bulk polymer markedly reduces crystallinity while retaining compatibility. Examination of electroviscous effects in methanol demonstrates that the salt–polymer adduct behaves as a typical polyelectrolyte at low salt concentrations, while the polymer in absence of salt is essentially insoluble in methanol at room temperature. Measurements of the equilibrium between salt and polymer along with a study of various molecular weight polymers strongly suggest that one salt molecule associates with about nine ethylene oxide units. It is proposed that the association is due to an ion–dipole interaction, and the anion is tentatively postulated as the species directly associating with the polymer. The association of other metal salts and other polymers are interpreted in this light. The significance of these results in interpreting salting-in phenomena is also discussed.     

Interactions of Pb(II) with particles of a polluted river

Pb(II) interactions with the surface of suspended matter from a polluted river was studied using differential pulse anodic stripping voltammetry (DPASV) technique. Three sampling sites were selected and studies have been done with samples collected in different times of the year (winter, autumn and summer). The values have been compared with those obtained in spring in the same conditions [Sci. Total Environ. 151 (1994) 101].Particles were separated by centrifugation and suspensions of the freeze-dried particles were titrated with Pb(II), being measured the labile metal fraction by DPASV. For comparison, suspensions of river water without any separation have also been titrated.Results show that surface metal complexes are inert, within the time scale of the analytical technique and desorbed organics from surfaces, form labile Pb(II) complexes in solution. For each sample it was determined the capacity for Pb complexation of particles and desorbed organics and the differential function has been estimated. Despite the heterogeneity of ligands, the systems interpreted in a discontinuous way, present one or two kinds of dominant ligands with Pb affinity.     

Amperometric determination of thioacetamide with copper(I)

A method is given for the amperometric determination of thioacetamide (TAA) based on the reaction of TAA with copper(I) in ammoniacal solution. The reduction current due to the copper(I) is used to determine the end-point. The determination is carried out at constant temperature (25°), pH 8.0-9.8 (ammonia-urotropine buffer), and at constant potential (−0.6 V vs. S.C.E.), with a dropping mercury electrode as cathode and a saturated calomel electrode as anode. The solution is deaerated by a stream of electrolytically generated hydrogen. The titrations are carried out simply and rapidly and the results are fairly reproducible. The error is generally 1.0% for amounts of TAA ranging from 0.07 to 1.8 mg.     

Synthesis and structure of an asymmetric copper(I) dimer with two-coordinate and four-coordinate copper(I) sites

An asymmetric copper(I) dimer Cu(1)2(pip)2 [pip = (2-picolyliminomethyl)pyrrole anion] with both two-coordinate and four-coordinate copper(I) sites was synthesized and studied by X-ray diffraction and DFT calculations.     

Solid state reactions of organopentafluorosilicates with copper(I) and copper(II) salts

Two types of solid state reaction of K₂[RSiF₅] have been developed: (1) CuCl promoted homo coupling of alkenyl- and phenyl-silicates, and (2) formation of RH fraom alkyl- and alkenyl-silicates by heating with CuF₂·2H₂O.     

O-Complexes of 1,3,2,5-dioxaboraphosphorinanes with copper(I) and silver(I) salts

1,3,2,5-Dioxaboraphosphorinanes interact stereospecifically with Cu(I) and Ag(I) salts to form the corresponding O-complexes. The three-dimensional structure of the ligands has been established from³¹P NMR and¹H NMR data.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 4, pp. 906–912, April, 1991.     

Toluene-sandwiched trinuclear copper(I) and silver(I) triazolates and phosphine adducts of dinuclear copper(I) and silver(I) triazolates

Cu (I) and Ag (I) complexes of the fluorinated triazolate ligand [3,5-(C3F7)2Tz](-) have been synthesized using the corresponding metal(I) oxides and the triazole. They form pi-acid/base adducts with toluene, leading to [Tol][M3][Tol] ([Tol]=toluene; [M3]={[3,5-(C3F7)2Tz]Cu}3 or {[3,5-(C3F7)2Tz]Ag}3) type structures. Packing diagrams show the presence of extended chains of the type {[Tol][M3][Tol]}infinity, but the intertoluene ring distances are too long for significant pi-arene/pi-arene contacts. These copper and silver triazolates react with PPh3 (at a 1:1 metal ion/P molar ratio), leading to dinuclear {[3,5-(C3F7)2Tz]Cu(PPh3)}2 and {[3,5-(C3F7) 2Tz]Ag(PPh3)}2. They feature a six-membered Cu(mu-N-N) 2Cu or Ag(mu-N-N)2Ag core with a boat conformation.     

Heterometallic iodoplumbates modified by copper(I) or silver(I) with viologens

Cu/Ag(I) were introduced into iodoplumbate systems to produce two new heterometallic iodoplumbates with viologen as templates, i.e. (PV)₂(Pb₂Cu₂I₁₀) (1) and [(BV)(Pb₂AgI₇)]_n (2) (PV²⁺ = propyl viologen, BV²⁺ = benzyl viologen), in which the common connection of PbI₆ units have been remarkably altered. In (PV)₂(Pb₂Cu₂I₁₀) (1), two PbI₆ octahedra are bridged by two CuI₄ tetrahedra via face-sharing to give a (Pb₂Cu₂I₁₀)^4? cluster, but the ternary one-dimensional polymeric (Pb₂AgI₇)_n^2n? of [(BV)(Pb₂AgI₇)]_n (2) is assembled from edge-sharing AgI₄ tetrahedra and PbI₆ octahedra. Their optical band gaps and fluorescence were also discussed. The absorption edges of haloplumbates could be engineered by introduction of suitable conjugated molecules as templates.     

Ferric hydrous oxide sols I. Monodispersed basic iron(III) sulfate particles

The methods of preparation of basic ferric sulfate sols consisting of particles uniform in shape of extremely narrow size distribution are described in detail. To produce such sols, acidic solutions containing ferric ions and sulfate ions were aged at elevated temperatures for a few hours. Solids formed from solutions containing a mixture of a ferric salt with a metal sulfate consisted of Fe₃(SO₄)₂(OH)₅· 2H₂O, which is the basic formulation for the alunite mineral group, whereas particles formed from ferric sulfate solutions also included Fe₄(SO₄)-(OH)₁₀ in varying proportions. The morphology of the particles was strongly dependent on the [Fe³⁺]: [SO₄²⁻] ratio in solution. Changes in the cation (K⁺, NH₄⁺, Na⁺) of the sulfate salt used in the mixture with ferric nitrate solutions greatly affected the particle size and also exhibited some effect on the lattice parameters. Certain cations (Mg²⁺, Ni²⁺, Cu²⁺) completely inhibited particle formation. During the first few hours of growth of the Fe₃(SO₄)₂-(OH)₅· 2H₂0 particles their diameters increased essentially linearly with time, indicating that the rate determining step was the surface reaction. The relevance of these systems to the study of corrosion of iron and steel is discussed.     

Needle-type colloidal copper (II)hydroxide particles

Stable dispersions of fine (< 0.05m) needle-type copper(II) hydroxide particles were prepared at room temperature by admixing sodium acetate and ammonia to copper sulfate solution. The particle length and width could be altered with the concentration of reactants. The rate of dissolution of copper(II) hydroxide particles in doubly distilled water at room temperature is time dependent, which is due in part to the formation of a mononuclear complex solute (CuOH⁺). After extended times (e.g., 18 h), the particles underwent phase transformation, resulting in longer needles of higher degree of crystallinity.Supported by the Griffin Corp., Valdosta, Georgia.     

Photoluminescent copper(I) complexes with amido-triazolato ligands

A series of heteroleptic copper(I) complexes incorporating amido-triazole and diphosphine ligands, [Cu(I)(N-phenyl-2-(1-phenyl-1H-1,2,3-triazol-4-yl)aniline)(dppb)] (1), [Cu(I)(N-(4-methylphenyl)-2-(1-phenyl-1H-1,2,3-triazol-4-yl)aniline)(dppb)] (2), [Cu(I)(N-(4-methoxyphenyl)-2-(1-phenyl-1H-1,2,3-triazol-4-yl)aniline)(dppb)] (3), [Cu(I)(N-(4-chlorophenyl)-2-(1-phenyl-1H-1,2,3-triazol-4-yl)aniline)(dppb)] (4), [Cu(I)(2,6-dimethyl-N-[2-(1-phenyl-1H-1,2,3-triazol-4-yl)phenyl]aniline)(dppb)] (5), [Cu(I)(2,6-dimethyl-N-[2-(1-benzyl-1H-1,2,3-triazol-4-yl)phenyl]aniline)(dppb)] (6), (dppb = 1,2-bis(diphenylphosphino)benzene), have been prepared. The complexes adopt a distorted tetrahedral geometry in the solid state with the amido-triazole ligand forming a six-member ring with the Cu(I) ion. The complexes exhibit long-lived photoluminescence with colors ranging from yellow to red-orange in the solid state, in frozen glass at 77 K, and in fluid solution with modest quantum yields of up to 0.022. Electrochemically, complexes 1-4 show irreversible oxidation waves while 5 and 6 are characterized by quasi-reversible oxidations as determined by cyclic voltammetry. For 1-4, the emission energy and oxidation potential are found to vary linearly with the Hammett parameter σ(p) of the substituent in the para position of the amido ligand, while in 5 and 6, large differences in emission are observed because of the nature of N3 substitution in the triazole ring. Density functional theory calculations have been performed on the singlet ground states (S(o)) of all complexes at the BP86/6-31G(d) level to assist in assignment of the excited states. On the basis of both experimental and computational results, we have assigned the excited states as intraligand + metal-to-ligand charge transfer (3)(ILCT+MLCT) or ligand-to-ligand charge transfer mixed with MLCT (3)(MLCT +LLCT) in these complexes.