Inter- and intramolecular palladium-catalyzed allyl cross-coupling reactions using allylindium generated in situ from allyl acetates, indium, and indium trichloride

Inter- and intramolecular palladium-catalyzed allyl cross-coupling reactions using allylindium generated in situ by treatment of allyl acetates with indium and indium trichloride in the presence of Pd(0) catalyst and nBuNMe(2) in DMF were successfully demonstrated. Allylindium species generated in situ by reductive transmetalation of pi-allylpalladium(II) complexes, obtained from a variety of allyl acetates in the presence of Pd(0) catalyst together with indium and indium trichloride, were found to be capable of acting as effective nucleophilic coupling partners in Pd-catalyzed cross-coupling reactions. A variety of allyl acetates such as but-1-en-3-yl acetate, crotyl acetate, and 2-methylallyl acetate afforded the corresponding allylic compounds in good yields in cross-coupling reactions. Various electrophilic cross-coupling partners such as aryl iodides and vinyl bromides and triflates participate in these reactions. Not only intermolecular but also intramolecular Pd-catalyzed cross-coupling reactions work equally well to produce the desired allylic coupling products in good yields.     

Efficient Stille cross-coupling reaction catalyzed by the Pd(OAc)2/Dabco catalytic system

[reaction: see text] An efficient Pd(OAc)2/Dabco-catalyzed Stille cross-coupling reaction procedure has been developed. In the presence of Pd(OAc)2 and Dabco (triethylenediamine), various aryl halides including aryl iodides, aryl bromides, and activated aryl chlorides were coupled efficiently with organotin compounds to afford the corresponding biaryls, alkene, and alkynes in good to excellent yields. Furthermore, high TONs [turnover numbers, up to 980,000 TONs for the coupling reaction of 1-bromo-4-nitrobenzene and furan-2-yltributyltin] for the Stille cross-coupling reaction were observed.     

Functionalized arylzinc compounds in ethereal solvent: direct synthesis from aryl iodides and zinc powder and application to Pd-catalyzed reaction with allylic halides

Arylzinc compounds, ArZnX, were conveniently prepared in high yields by the reaction of zinc powder with aryl iodides, which contain electron-withdrawing groups such as CO(2)CH(3), CN, Br, or CF(3) at the ortho-, meta- or para-position, or electron-donating groups such as CH(3), OCH(3), or H, at 70 degrees C in THF, at 100 degrees C, or at 130 degrees C in diglyme, respectively. Pd(dba)(2) exhibited an outstanding efficient catalytic effect for the cross-coupling of these ethereal solutions of ArZnX with allylic halides to afford a variety of functionalized allylbenzenes in high yields; the reactions were mostly carried out at 0 degrees C for 5-30 min in the presence of 5 mol % of catalyst. The conversion of the aryl iodides to allylbenzenes via two reactions could be accomplished in one pot.     

Cross-coupling reactions of (1-fluorovinyl)methydiphenylsilane(1) with aryl halides and aryl triflates

The cesium fluoride (CsF)-assisted cross-coupling reaction of (1-fluorovinyl)methyldiphenylsilane (1) with aryl halides and aryl triflates was examined. The reaction with aryl iodides smoothly proceeded to afford the corresponding (1-fluorovinyl)arenes in the presence of a catalytic amount of CuI and Pd(PPh(3))(4) in aprotic polar solvents such as DMF, DMI, DMA, and NMP in good yields. A variety of functional groups (nitro, ester, ketone, and ether) on the aromatic rings can be tolerated under these mild conditions. Aryl iodides are superior to aryl bromides as the coupling reaction partner. The cross-coupling reaction of 1 with aryl triflates instead of aryl halides was also accomplished in the presence of tetrabutylammonium iodide (n-Bu(4)NI) as the additive under similar conditions.     

The palladium-catalyzed “head-to-tail” cross-coupling reaction of 1-alkenylboranes with phenyl or 1-alkenyl iodides. A novel synthesis of 2-phenyl-1-alkenes or 2-alkyl-1,3-alkadienes via organoboranes

The reaction of phenyl or 1-alkenyl iodides with 1-alkenyl-1,3,2-benzodioxaboroles readily obtainable via the hydroboration of 1-alkynes, gives the corresponding “head-to-tail” cross-coupling products, 2-phenyl-1-alkenes or 2-alkyl-1,3-alkadienes, in good yields. The reaction is effectively catalyzed by catalytic amounts of palladium compounds in the presence of triethylamine.     

An efficient Stille cross-coupling reaction catalyzed by Pd(OAc)2/DAB-Cy catalytic system

An efficient palladium-catalyzed Stille cross-coupling reaction has been developed. In the presence of 3 mol% of Pd(dba)₂ and 6 mol% of DAB-Cy (1,4-dicyclohexyl-diazabutadiene), various aryl halides (iodides and bromides) were coupled with organotin compounds to afford the corresponding biaryls and alkyne in good to excellent yields. Furthermore, high TONs [turnover numbers, TONs up to 950,000 for the reaction of 1-iodo-4-nitrobenzene and tributyl(phenyl)stannane] for the Stille cross-coupling reaction were observed.     

Guanidine/Pd(OAc)2-catalyzed room temperature Suzuki cross-coupling reaction in aqueous media under aerobic conditions

A highly efficient Pd(OAc)2/guanidine aqueous system for the room temperature Suzuki cross-coupling reaction has been developed. The new water-soluble and air-stable catalyst Pd(OAc)2.(1f)2 from Pd(OAc)2 and 1,1,3,3-tetramethyl-2-n-butylguanidine (1f) was synthesized and characterized by X-ray crystallography. In the presence of Pd(OAc)2.(1f)2, coupling of arylboronic acids with a wide range of aryl halides, including aryl iodides, aryl bromides, even activated aryl chlorides, was carried out smoothly in aqueous solvent to afford the cross-coupling products in good to excellent yields and high turnover numbers (TONs) (TONs up to 850,000 for the reaction of 1-iodo-4-nitrobenzene and phenylboronic acid). Furthermore, this mild protocol could tolerate a broad range of functional groups.     

A general rhodium-catalyzed cross-coupling reaction of thiols with aryl iodides

The general procedure for the rhodium-catalyzed cross-coupling of thiols with aryl iodides is described. The catalytic system consists of 5 mol % of [RhCl(cod)]₂ and 10 mol % of PPh₃ as a ligand. A variety of aryl iodides reacted with thiols, giving aryl thioethers in good to excellent yields. It is important to note that the deactivated aryl iodides such as 4-iodoanisole is worked smoothly to provide the corresponding aryl thioethers in excellent yields. Functional groups such as free-amines, chloro, are all tolerated under the employed reaction conditions.     

Copper(II)-catalyzed preparation of alkylindium compounds and applications in cross-coupling reactions both in aqueous media

An efficient water-based method for the synthesis of alkylindium compound in the presence of a catalytic amount of cheap and readily available CuSO₄·5H₂O (10 mol%) was developed. The thus-generated alkylindium compounds effectively underwent palladium-catalyzed cross-coupling reactions with a myriad of aryl halides in aqueous media, leading to the cross-coupled products in modest to high yields. The mildness of the formed alkyl organometallics allowed the tolerance to various important functional groups incorporated in both substrates of alkyl iodides and aryl halides.     

Substrate-promoted ligand-free CuI catalyzed S-arylation of 2-mercaptobenzothiazoles with aryl iodides in water

A green and efficient method has been developed for the cross-coupling of 2-mercaptobenzothiazoles with aryl iodides in water. The reactions proceeded smoothly under ligand-free conditions in the presence of TBAB to give the corresponding products in good yields. The protocol showed good tolerance toward a variety of functional groups. A substrate-promoted mechanism for this catalytic reaction has been proposed.     

Carbonylative cross-coupling reaction of ethynylstibane with aryl iodides

Palladium-catalyzed carbonylative cross-coupling reaction of ethynylstibane (PhSbPh(2)) and aryl iodides (Ar-I) is described. The reaction of the stibanes and the halides under 1 atm of carbon monoxide in N,N-dimethylacetamide using a combination of 5 mol% Pd(OAc)(2) and 4 equivalents (20 mol%) of PPh(3) brought about carbonylative cross-coupling reaction to afford arylethynylketones [ArC(O)Ph] in good yields along with a small amount of directly coupled products, aryl acetylens (ArPh). Formation of the side product was completely suppressed by conducting the reaction under high CO pressure (20 atm) conditions. The present method provides a variety of carbonylated products in good yield even with electron-deficient aryl iodides which usually give inferior results due to their tendency to undergo decarbonylation in the cross-coupling reaction of ethynylstibanes and acyl halides.     

Vinylation of aromatic halides using inexpensive organosilicon reagents. Illustration of design of experiment protocols

The preparation of styrenes by palladium-catalyzed cross-coupling of aromatic iodides and bromides with divinyltetramethyldisiloxane (DVDS) in the presence of inexpensive silanolate activators has been developed. To facilitate the discovery of optimal reaction conditions, Design of Experiment (DoE) protocols were used. By the guided selection of reagents, stoichiometries, temperatures, and solvents, the vinylation reaction was rapidly optimized with three stages consisting of ca. 175 experiments (of a possible 1440 combinations). A variety of aromatic iodides undergo cross-coupling at room temperature in the presence of potassium trimethylsilanoate using Pd(dba)2 in DMF in good yields. Triphenylphosphine oxide is needed to extend catalyst lifetime. Application of these conditions to aryl bromides was accomplished by the development of two complementary protocols. First, the direct implementation of the successful reaction conditions using aryl iodides at elevated temperature in THF provided the corresponding styrenes in good to excellent yields. Alternatively, the use of potassium triethylsilanolate and a bulky "Buchwald-type" ligand allows for the vinylation reactions to occur at or just above room temperature. A wide range of bromides underwent coupling in good yields for each of the protocols described.     

Pd-catalyzed decarboxylative couplings of arenecarboxylic acids with aryl iodides

The combination of palladium chloride with BINAP shows high efficiency in the decarboxylative cross-coupling reactions of arenecarboxylic acids with aryl iodides. The reactions proceed smoothly to generate the corresponding biaryl compounds in good to excellent yields.     

Palladium-catalyzed synthesis of 1,2,3,4-tetraalkyl-1,4-diarylbutadienes by cross-coupling of zirconacyclopentadienes with aryl iodides

A novelmethod for the synthesis of 1, 2, 3, 4-tetraalkyl-1, 4-diarylbutadienes was developed via palladiumcatalyzed cross-coupling of zirconacyclopentadienes with aryl iodides. Equivalent of CuCl was introduced to promote the reaction. The desired products were obtained in good to excellent yields and several of them were reported for the first time.     

Nickel-catalyzed asymmetric reductive cross-coupling of α-chloroesters with (hetero)aryl iodides

An asymmetric reductive cross-coupling of α-chloroesters and (hetero)aryl iodides is reported. This nickel-catalyzed reaction proceeds with a chiral BiOX ligand under mild conditions, affording α-arylesters in good yields and enantioselectivities. The reaction is tolerant of a variety of functional groups, and the resulting products can be converted to pharmaceutically-relevant chiral building blocks. A multivariate linear regression model was developed to quantitatively relate the influence of the α-chloroester substrate and ligand on enantioselectivity.

A Ni-catalyzed enantioselective reductive cross-coupling of α-chloroesters and (hetero)aryl iodides is reported. A MLR model was developed to quantitatively relate the influence of the α-chloroester substrate and ligand on enantioselectivity.     

Synthesis of alkenyl sulfides through the iron-catalyzed cross-coupling reaction of vinyl halides with thiols

We report here the iron-catalyzed cross-coupling reaction of alkyl vinyl halides with thiols. While many works are devoted to the coupling of thiols with alkyl vinyl iodides, interestingly, the known S-vinylation of vinyl bromides and chlorides is limited to 1-(2-bromovinyl)benzene and 1-(2-chlorovinyl)benzene. Investigation on the coupling reaction of challenging alkyl vinyl bromides and chlorides with thiols is rare. Since the coupling of 1-(2-bromovinyl)benzene and 1-(2-chlorovinyl)benzene with thiols can be performed in the absence of any catalyst, here we focus on the coupling of thiols with alkyl vinyl halides. This system is generally reactive for alkyl vinyl iodides and bromides to provide the products in good yields. 1-(Chloromethylidene)-4-tert-butyl-cyclohexane was also coupled with thiols, giving the targets in moderate yields.     

Efficient palladium-catalyzed homocoupling reaction and Sonogashira cross-coupling reaction of terminal alkynes under aerobic conditions

An efficient method for palladium-catalyzed homocoupling reaction of terminal alkynes in the synthesis of symmetric diynes is presented. The results showed that both Pd(OAc)(2) and CuI played crucial roles in the reaction. In the presence of 2 mol % Pd(OAc)(2), 2 mol % CuI, 3 equiv of Dabco, and air, homocoupling of various terminal alkynes afforded the corresponding symmetrical diynes in moderate to excellent yields, whereas low yields were obtained without either Pd(OAc)(2) or CuI. Moreover, high TONs (turnover numbers; up to 940 000 for the reaction of phenylacetylene) for the homocoupling reaction were observed. Under similar reaction conditions, cross-coupling of 1-iodo-4-nitrobenzene with phenylacetylene was also carried out smoothly in quantitative yield. However, the presence of CuI disfavored the palladium-catalyzed Sonogashira cross-coupling reactions of the less active aryl iodides and bromides. In the presence of 0.01-2 mol % Pd(OAc)(2), a number of aryl iodides and bromides were coupled with terminal alkynes in good to excellent yields. It is noteworthy that this protocol employs mild, efficient, aerobic, copper-free, and ligand-free conditions.     

Efficient ligand-free copper-catalyzed N-arylation of amides with aryl halides in water

A convenient and efficient protocol has been developed for the cross-coupling of amides and aryl iodides using a ligand-free copper(I) oxide catalyst in water. A variety of amide derivatives afforded the corresponding N-arylated products in moderate to good yields (up to 88%).     

Pd-catalyzed coupling of aryl iodides with triarylbismuths as atom-economic multi-coupling organometallic nucleophiles under mild conditions

The facile cross-coupling reactivity of triarylbismuth compounds with aryl iodides was achieved under mild heating conditions. The established catalytic protocol using Pd(OAc)₂(Cy₂NH)₂ system exhibited high coupling reactivity with a variety of triarylbismuth and aryl iodide compounds under mild conditions. These coupling reactions were completed in short reaction time affording good to high yields of functionalized biaryl products. The studies of multi-coupling reactions with tris(4-iodophenyl)amine, 8 also furnished moderate to good yields of coupled products, 8a-8f.     

Cu2O/Cs2CO3/DMF: An efficient catalytic system for N-arylation of imidazole with aryl halides under ligand-free conditions

A ligand-free Cu-catalyzed protocol for the Ullmann-type N-arylation of N-containing heterocycles with aryl or heteroaryl iodides and bromides has been established. A broad range of functional groups is well tolerated on both of the cross-coupling partners, producing the desired products in good to excellent yields.