Syntheses, structures, photoluminescence and theoretical studies of xanthone in crystalline resorcinarene-based inclusion complexes

Two new crystalline resorcinarene-based xanthone inclusion complexes, CECRxanthoneMeOH (1), and HECR2 xanthone6 MeOH (2) (CECR = C-ethylcalix[4]resorcinarene, HECR = hexaethylresorcin[6]arene) have been prepared to study the relation between photophysical properties and solid-state structure. Compared with the neat crystals, the xanthone phosphorescence is severely quenched in both solids, but the lifetime is an order of magnitude larger in 2, in which xanthone occurs as a dimer, than in 1, in which it occurs as a monomer. The electronic transitions involved in the photoluminescent process, and the relation between the energy levels of host and guest and emission quenching of the guest in the supramolecular solid have been investigated by means of time-dependent density functional theory (TDDFT) calculations.     

Ammonium, alkylammonium, and amino acid complexes of a hexacopper fluoro-metallacrown cavitand

Reaction of CuF2 with one equivalent of 3{5}-(pyrid-2-yl)-5{3}-(tertbutyl)pyrazole (HL) and excess NH4OH in MeOH affords crystalline [NH4{Cu(micro-F)(microL)}6(CH2Cl2)2]HF2 in moderate yield. This compound contains the 12-MC-6 metallacrown [{Cu(micro-F)(micro-L)}6] (1) with a NH4 + ion at its center, and CH2Cl2 molecules complexed in bowl-shaped cavities above and below the Cu6F6 ring. Similar reactions using the bases MeNH2, glycine, l-alanine or beta-alanine afforded solvated crystals of [1(H3NMe)2]Cl2, [1(gly)2], [1(l-ala)2], and [1(beta-ala)2], respectively. The metallacrown 1 in these products contains methylammonium and zwitterionic amino-acid guests in its two bowl-shaped cavities; each of the amino acids hydrogen-bonds to three F atoms. A related reaction using 1,6-diaminohexane resulted in fixation of CO2 from the air to give solvated [1(H3NC6H12NHCO2)2], again with a zwitterionic guest. NMR, ESI-MS and UV/vis measurements suggest that the metallacrown 1 retains its integrity in several organic solvents, although it is unclear to what extent guest binding takes place in solution.     

Electrochemically controlled formation/dissociation of phosphonate-cavitand/methylpyridinium complexes

The phosphorus-bridged cavitand 1 self-assembles very efficiently in CH2Cl2 with either the monopyridinium guest 2+ or the bispyridinium guest 3(2+). In the first case a 1:1 complex is obtained, whereas in the second case both 1:1 and 2:1 host-guest complexes are observed. The association between 1 and either one of the guests causes the quenching of the cavitand fluorescence; in the case of the adduct between 1 and 3(2+), the fluorescence of the latter is also quenched. Cavitand complexation is found to affect the reduction potential values of the electroactive guests. Voltammetric and spectroelectrochemical measurements show that upon one-electron reduction both guests are released from the cavity of 1. Owing to the chemical reversibility of such redox processes, the supramolecular complexes can be re-assembled upon removal of the extra electron from the guest. Systems of this kind are promising for the construction of switchable nanoscale devices and self-assembling supramolecular materials, the structure and properties of which can be reversibly controlled by electrochemical stimuli.     

Calixarenes as hosts for ammonium cations: a quantum chemical study and mass-spectrometric investigations

Host-guest complexes of tetramethylcavitand with different ammonium cations were investigated by using a quantum chemical method at the density functional level (BP86, B3 LYP). The NH4+ cation is strongly bound to the host. Increasing methyl substitution at the cation decreases its inclination towards the complex formation. The calculated data are in line with results from electrospray ionization mass spectrometry (ESI-MS) experiments. They reveal stable aggregates only for the NH4+ cation and for the primary alkylammonium cations.     

Dynamics in host-guest complexes of molecular tweezers and clips

The dynamics in the host-guest complexes of the molecular tweezers 1 a,b and clips 2 a,b with 1,2,4,5-tetracyanobenzene (TCNB, 3) and tropylium tetrafluoroborate (4) as guest molecules were analyzed by temperature-dependent 1H NMR spectroscopy. The TCNB complexes of tweezers 1 a,b were found to be particularly stable (dissociation barrier: DeltaG(++)=16.8 and 15.7 kcal mol(-1), respectively), more stable than the TCNB complexes of clips 2 a,b and the tropylium complex of tweezer 1 b (dissociation barrier: DeltaG(++)=12.4, 11.2, and 12.3 kcal mol(-1), respectively). A detailed analysis of the kinetic and thermodynamic data (especially the negative entropies of activation found for complex dissociation) suggests that in the transition state of dissociation the guest molecule is still clipped between the aromatic tips of the host molecule. The 1H NMR analysis of the TCNB complexes 3@1 b and 3@2 a at low temperatures (T<-80 degrees C) showed that 3 undergoes fast rotation inside the cavity of tweezer 1 b or clip 2 a (rotational barrier: DeltaG( not equal)=11.7 and 8.3 kcal mol(-1), respectively). This rotation of a guest molecule inside the host cavity can be considered to be the dynamic equilibration of noncovalent conformers. In the case of clip complex 3@2 a the association and rotational barriers are smaller by DeltaDeltaG(++)=3-4 kcal mol(-1) than those in tweezer complexes 3@1 a,b. This can be explained by the more open topology of the trimethylene-bridged clips compared to the tetramethylene-bridged tweezers. Finally, the bromo substituents in the newly prepared clip 2 b have a substantial effect on the kinetics and thermodynamics of complex formation. Clip 2 b forms weaker complexes with (TCNB, 3) and tetracyanoquinodimethane (TCNQ, 12) and a more stable complex with 2,4,7-trinitrofluoren-9-ylidene (TNF, 13) than the parent clip 2 a. These results can be explained by a less negative electrostatic potential surface (EPS) inside the cavity and a larger van der Waals contact surface of 2 b compared to 2 a. In the case of the highly electron-deficient guest molecules TCNB and TCNQ the attractive electrostatic interaction is predominant and hence responsible for the thermodynamic complex stability, whereas in the case of TNF with its extended pi system, dispersion forces are more important for host-guest binding.     

Facile,high-yielding synthesis of deepened cavitands: a synthetic and theoretical study

A wide variety of 2-methyl-resorcinol-based deepened cavitands were synthesised from readily available reagents in a four-step procedure with overall yields of up to 62%. A systematic variation of the rim was carried out by building up a flexible upper aromatic wall on the rigid cavitand platform through CH₂, CH₂O and CH₂OCH₂ spacers. These aromatic walls were further extended by a Suzuki cross-coupling reaction. Full characterisation of the synthesised cavitands was carried out. The solid-state structure of tetrakis(phenoxymethyl)cavitand was determined by X-ray crystallography. Gas-phase theoretical calculations for this molecule predict the presence of weak T-shaped interactions between the upper phenyl rings. The host–guest complex formation ability of two deepened cavitand hosts towards 4-chloro-benzotrifluoride was proved by photoluminescence method.     

Guest-induced supramolecular isomerism in inclusion complexes of T-shaped host 4,4-bis(4'-hydroxyphenyl)cyclohexanone

The T-shaped host molecule 4,4-bis(4'-hydroxyphenyl)cyclohexanone (1) has an equatorial phenol group and a cyclohexanone group along the arms and an axial phenol ring as the stem. The equatorial phenyl ring adopts a "shut" or "open" conformation, like a windowpane, depending on the size of the guest (phenol or o/m-cresol), for the rectangular voids of the hydrogen-bonded ladder host framework. The adaptable cavity of host 1 expands to 11x15-18 A through the inclusion of water with the larger cresol and halophenol guests (o-cresol, m-cresol, o-chlorophenol, and m-bromophenol) compared with a size of 10x13 A for phenol and aniline inclusion. The ladder host framework of 1 is chiral (P2(1)) with phenol, whereas the inclusion of isosteric o- and m-fluorophenol results in a novel polar brick-wall assembly (7x11 A voids) as a result of auxiliary C-H...F interactions. The conformational flexibility of strong O-H...O hydrogen-bonding groups (host 1, phenol guest), the role of guest size (phenol versus cresol), and weak but specific intermolecular interactions (herringbone T-motif, C-H...F interactions) drive the crystallization of T-host 1 towards 1D ladder and 2D brick-wall structures, that is, supramolecular isomerism. Host 1 exhibits selectivity for the inclusion of aniline in preference to phenol as confirmed by X-ray diffraction, 1H NMR spectroscopy, and thermogravimetry-infrared (TG-IR) analysis. The T(onset) value (140 degrees C) of aniline in the TGA is higher than those of phenol and the higher-boiling cresol guests (T(onset)=90-110 degrees C) because the former structure has more O-H...N/N-H...O hydrogen bonds than the clathrate of 1 with phenol which has O-H...O hydrogen bonds. Guest-binding selectivity for same-sized phenol/aniline molecules as a result of differences in hydrogen-bonding motifs is a notable property of host 1. Host-guest clathrates of 1 provide an example of spontaneous chirality evolution during crystallization and a two-in-one host-guest crystal (phenol and aniline), and show how weak C-H...F interactions (o- and m-fluorophenol) can change the molecular arrangement in strongly hydrogen-bonded crystal structures.     

Design and self-assembly of ditopic and tetratopic cavitand complexes

The self-assembly of open ditopic and tetratopic cavitand complexes has been investigated by using monofunctionalized cavitand ligands and suitable metal precursors. In the case of ditopic complexes, self-assembly protocols, leading exclusively to the formation of both thermodynamically stable cis-Pt square-planar complexes 8 and 9 and the kinetically inert fac-Re octahedral complex 14, have been elaborated. The use of cis-[Pt(CH3)CN)2Cl2] as metal precursor led to the formation of monotopic trans-10 and ditopic trans-11 cavitand complexes, while cis-[Pt(dmso)2Cl2] afforded both cis-13 and trans-11 isomers. The self-assembly of tetratopic cavitand complexes has been achieved by using mononuclear [Pd(CH3CN)4(BF4)2] and dinuclear [M2(tppb)(OTf)4] (19: M = Pt; 20: M = Pd) metal precursors. Only the tetratopic dinuclear complexes 21 and 22 were stable. The ligand configuration with two phosphorus and two cavitand ligands at the metal centers is the most appropriate to build tetratopic cavitand complexes with sufficient kinetic stability.     

Host-guest-driven copolymerization of tetraphosphonate cavitands

The outstanding complexing properties of tetraphosphonate cavitands towards N‐methylpyridinium salts were exploited to realise a new class of linear and cyclic AABB supramolecular polymers through host–guest interactions. The effectiveness of the selected self‐association processes was tested by ¹H NMR studies, whereas microcalorimetric analyses clarified the binding thermodynamics and revealed the possibility of tuning entropic contributions by acting on the flexibility of the guest linker. Although the formation of linear polymeric chains for a rigid system was demonstrated by X‐ray analysis, the presence of a concentration‐dependent ring–chain equilibrium was indicated by solution viscosity measurements in the case of a very flexible ditopic BB guest co‐monomer.     

Stacked platinum complexes of the magnus' salt type inside a coordination cage

Neatly wrapped up: alternately stacked square-planar platinum(II) complexes inside a dinuclear coordination cage were prepared to give a discrete and soluble Pt(5) -array of the Magnus' salt type. Characterization of the complex in solution was complemented by an X-ray crystal structure of {[Pt(pyridine)(4)]? [PtCl(4)](2) @Cage}; this structure showed the linear, pentanuclear array within the cages and their circular packing into a hollow tubular superstructure.