Characterization of airborne particulates by laser microprobe mass analysis

Summary Laser microprobe mass analysis (LAMMA) was applied to characterize aerosol particles collected and separated from 16m to 0.06m by a low pressure cascade impactor. Positive ion LAMMA spectra showed characteristic molecular peaks such as PbCl⁺, a series of Si₂O⁺–Si₂O₄ ⁺ and NaAl₂Si₂O₂ ⁺–NaAl₂Si₂O₅ ⁺, and TiO⁺ in 0.06–0.12m, 0.5–1m and 4–8m fraction, respectively. In the negative ion LAMMA spectra, it was observed that the fragment peaks of sulfate ions were deficient above 2m and those of nitrate ions were deficient under 2m. LAMMA allows remarkable insights into the chemical nature of aerosol particles.

---

Charakterisierung luftgetragener Teilchen durch Laser-Microprobe-Massenspektrometrie

Zusammenfassung Laser-Microprobe-Spektrometrie (LAMMS) wurde zur Analyse atmosphärischen Aerosols herangezogen, welches im Korngrößenbereich zwischen 16m und 0.06m mit einem Niederdruckkaskadenimpaktor fraktioniert gesammelt wurde. Positive LAMMS-Spektren zeigten charakteristische molekulare Peaks, wie etwa PbCl⁺, eine Serie von Si₂O⁺–Si₂O₄ ⁺ und NaAl₂Si₂O₂ ⁺–NaAl₂Si₂O₅ ⁺, sowie TiO⁺ in der 0,06–0,12-m,- 0,5–1–m- bzw. 4–8-m-Fraktion. In den negativen LAMMS-Spektren konnten über 2m keine Fragmentpeaks für Sulfationen, unter 2m. keine für Nitrationen beobachtet werden. LAMMS ermöglicht eine bemerkenswerte Einsicht in die chemische Natur von Aerosolteilchen.

     

Determination of pentachlorophenol residues in wine and corks by solvent extraction methodology and specific gas chromatography detection

Summary A gas chromatographic methodology with selective detection is presented for the analysis in wines and corks of pentachlorophenol residues, which are suspected to be the most likely precursors of some off-flavours described in several wine samples. After derivatisation, pentachlorophenol acetate residues were monitored by electrolytic conductivity detection and/or mass spectrometric detection in the selective ion mode at m/z 264 and 266. Recoveries varied from 80 to 96% for wine samples fortified with 5 to 100 g l^–1 and from 83 to 91% for corks (fortified at 25 to 100 g kg^–1). The proposed methodology allowed for a determination limit of g l^–1 for wine and 10 g kg^–1 for corks.     

Path of “dry” electrons before localization in liquid hydrocarbons

Conclusions On the basis of measurements of values of in liquid hydrocarbons, it has been shown that the path length before localization of a photoliberated electron increases with increasing mobility of the excess electron, from approximately 40 Å (methylcyclohexane) to 200 Å (isooctane). In a liquid with10^–2 cm²/V·sec (methylcyclohexane, hexane), the localization takes place before or immediately after thermalization of the electron. In a liquid with>10^–1 cm²/V·sec, the electron passes through the main part of its path before localization, being in thermal equilibrium with the medium.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 10, pp. 2198–2203, October, 1985.     

Differential pulse voltammetric methods for the simultaneous estimation of uranium-iron and uranium-cadmium mixtures in solution

Differential pulse voltammetric methods have been developed for the simultaneous estimation of the constituents of uranium-iron and uranium-cadmium mixtures in solution. A mixture of 1M H₃PO₄–1M KH₂PO₄ (with a pH1.5), was found to be the most ideal supporting electrolyte for both methods, among many that were evaluated for their suitability. In uranium-iron mixtures the calibration for iron was found to be linear up to 150 g ml^–1 (r²=0.9986), while that of uranium up to 500 g ml^–1 (r²=0.999). Iron at 6.7 g ml^–1 level could be determined in the presence of 800 fold uranium (wt/wt) without significant interference. Uranium at 21 g ml^–1 level could be analyzed with 5-fold iron (wt/wt). This upper limit of iron was due to the precipitation of iron as phosphate. In the case of uranium — cadmium mixtures, cadmium calibration for cadmium was found to be linear up to 1300 g ml^–1 (r²=0.9993). Concentration levels of 4.6 g ml^–1 Cd could be determined at a 500-fold excess (wt/wt) of uranium. Uranium calibration was linear up to 500 g ml^–1 (r²=0.999) and 21 g ml^–1 uranium could tolerate up to a 1000-fold excess of cadmium (wt/wt). Both procedures could tolerate 10 g ml^–1 levels of metal ions, such as chromium, copper, manganese, molybdenum and vanadium.     

Semi-automatic catalytic titration of some aminopoly-carboxylic acids,copper(II), and cobalt(II)

Summary A semi-automatic potentiometric method is described for the catalytic titrimetric determination ofg amounts of some aminopolycarboxylic acids. The method is based on their inhibitory effect on the copper(II)-catalyzed periodate-thiosulfate reaction. Amounts of EDTA in the 0.7–600g range (10^–6–8×10^–5 M), of DCTA in the 7–7000g range (10^–6–10^–3 M), of EGTA in the 0.8–800g range (10^–7–10^–4 M), and of DTPA in the 4–800g range (5×10^–7–10^–4 M) were determined with average relative errors and coefficient of variation of about 0.4–1%. The method has also been used for the indirect catalytic titrimetric determination ofg amounts of Cu²⁺ and Co²⁺ ions with about the before mentioned accuracy and precision.

---

Halbautomatische katalytische Titration einiger Aminopolycarbonsäuren sowie von Cu(II) und Co(II)

Zusammenfassung Eine halbautomatische potentiometrische Methode zur katalytischen Maßanalyse von Mikrogrammengen einiger Aminopolycarbonsäuren wurde angegeben. Sie beruht auf dem Hinderungseffekt gegenüber der Cu(II)katalysierten Perjodat-Thiosulfatreaktion. EDTA in Mengen von 0,7–600g, DCTA in Mengen von 7–7000g, EGTA in Mengen von 0,8–800g und DTPA in Mengen von 4–800g wurden mit einem mittleren relativen Fehler von etwa 0,4–1% bestimmt. Das Verfahren wurde auch zur Bestimmung von Cu(II) und Co(II) mit der angeführten Genauigkeit verwendet.

     

ET-AAS in the Analysis of high-purity mercury

ET-AAS is investigated for the analysis of high purity mercury. Two possibilities are proposed: ET-AAS determination of trace analytes in the presence of high mercury concentrations or after matrix separation by reduction. The ET-AAS analysis of high-purity mercury under optimal instrumental parameters permits fast and reproducible determination of 0.03 gg^–1 Al, Cd and Mn; 0.05 gg^–1 Cu, Co, Cr, Fe, Ni and Pb and 0.2 gg^–1 V. Preliminary mercury matrix reductive separation with ascorbic acid allows determination of 0.005 gg^–1 Cd, 0.02 gg^–1 Cu, Cr and Mn, 0.03 g g^–1 Co, Ni and Pb, 0.05 g g^–1 Al and Fe and 0.1 gg^–1 V, but the reproducibility is lower. The main advantage of the second procedure is that it avoids laboratory and instrument pollution with toxic mercury.     

Nuclear interferences of uranium and thorium in a reactor neutron activation analysis determination of cerium using the radionuclides141Ce and143Ce

The interference contributions of uranium and thorium to the determination of cerium based on radionuclides¹⁴¹Ce and¹⁴³Ce produced by irradiation in a reactor core was determined. The values of the interference contributions for¹⁴¹Ce were 0.28±0.01 g Ce/g U and /2.01±0.05/x10^–3 g Ce/g Th, and for¹⁴³Ce 1.33±0.03 g Ce/g U and /9.0±0.2/x10^–3 g Ce/g Th.     

Determination of oxygen by deuteron-induced PIPPS

Using the 871-keV¹⁶O p/1,0/ prompt -ray, oxygen was determined with a relative precision of ±3.8% at a concentration level of 120 g g^–1. The sensitivity of the method is below 10 g g^–1. 50 nm oxide layers on silicon wafers can be determined with a relative precision of 10%. A chamber for transporting targets sensitive to atmospheric gases and humidity is described.     

Platinum concentration in silicone breast implant material and capsular tissue by ICP-MS

Inductively coupled plasma-mass spectrometry (ICP-MS) was used to determine the concentration of platinum (Pt) in silicone breast implant gel (range, 0.26–48.90 g g^–1 Pt; n=15), elastomer (range, 3.05–28.78 g g^–1 Pt; n=7), double lumen (range, 5.79–125.27 g g^–1 Pt; n=7), foam (range, 5.79–8.36 g g^–1 Pt; n=2), and capsular tissue (range, 0.003–0.272 g g^–1 Pt; n=15). The results show that very high levels of Pt are present in the encasing elastomer, double lumen, and foam envelope materials. Silicone breast implants can be a source of significant Pt exposure for individuals with these implants.     

Preparation and Properties of Nb-Coated Barium Titanate Composite Particles by Surface Modification with Nb Alkoxide in Hydrophobic Solvent

Chemical processing for the preparation of Nb-coated barium titanate composite particles was investigated using surface modification technology, hydrolyzing Nb ethoxide on the surface of barium titanate particles dispersed in hydrophobic solvent.It was confirmed from the measurements of specific surface area and zeta potential as well as SEM, TEM and EDX observations of the resulting composite particles that the original barium titanate particles were coated uniformly with hydrolysis product of Nb ethoxide.Barium titanates coated with 1 wt% of Nb as oxide were well sintered at 1200–1300°C. The dielectric constants of the sintered barium titanates showed flattened temperature dependence, but it depended upon the average particle size of original barium titanate. The sintered bodies of Nb-coated barium titanate powders with average particle size of 0.2 m gave dielectric constants of 2000–3000 and those of barium titanate with average particle size of 0.5 m showed dielectric constants of 3000–4000 at room temperature.The microstructure of the sintered barium titanate coated with Nb oxide consisted of grains of about 1 m, smaller than those of sintered original barium titanate.     

Determination of Dextromethorphan and Dextrorphan in Human Urine by High Performance Liquid Chromatography for Pharmacogenetic Investigations

The aim of the present study was to develop a sensitive method to measure dextromethorphan and dextrorphan in urine by HPLC to support pharmacogenetic studies in ethnic groups. Linearity was assessed in the range: 0.015–10 g mL^–1 for dextromethorphan and 1-10 g mL^–1 for dextrorphan. Inter and intra-day coefficients of variation were < 10%. Limits of detection and quantitation were 0.003 g mL^–1 and 0.015 g mL^–1 for dextromethorphan and 0.24 g mL^–1 and 1.0 g mL^–1 for dextrorphan, respectively. The method is reliable in helping determine the phenotype of Mexican ethnic groups using model drugs such as dextromethorphan.     

Spectrophotometric and derivative spectrophotometric determination of palladium(II) using pyridopyridazine dithione in the presence of non-ionic surfactant

Pyridopyridazine dithione (PPD) was synthesized as a new sensitive and selective reagent for spectrophotometric and derivative spectrophotometric determination of palladium(II). In aqueous and micellar medium, PPD forms 1:4 complexes having molar absorptivities of 4.68 × 10⁴ and 5.74 × 10⁴lmol^–1 cm^–1 at 570 and 615 nm, respectively. Beer's law was obeyed up to 2.2 and 2.5 g ml^–1 with detection limits of 0.2 and 0.1g ml^–1. The relative standard deviations for 1.23g ml^–1 were 2.6 and 1.3%, in the absence and presence of Triton X-100. In fourth-derivative mode, the regression equation, linear range, detection limit and RSD for 0.075 g ml^–1 wereD ₄ = 4.3C + 1.5 × 10^–3, 0.013 – 0.23 g ml^–1, 3.7 ng ml–1 and 0.78%, respectively. The ionization constants of the reagent and stability constants of the complexes were evaluated. The method is free from interference by most common metal ions and anions. The method was applied for determination of palladium in activated charcoal.     

Application of l-cysteine-capped nano-ZnS as a fluorescence probe for the determination of proteins

Nanometer-sized l-cysteine-capped ZnS particles have been synthesized and used as a fluorescence probe to investigate the effect of proteins on fluorescent intensity. With =190 nm, maximum and constant synchronous fluorescence enhancement was produced at 267 nm and pH 5.12 in the presence of proteins. A highly sensitive synchronous fluorescence method for the rapid determination of proteins has been developed. Under optimum conditions, calibration graphs are linear over the range 0.03–8.0 g mL^–1 for bovine serum albumin (BSA), 0.01–6.0 g mL^–1 for human serum albumin (HSA), 0.05–8.0 g mL^–1 for -globulin (-G), and 0.04–4.0 g mL^–1 for ovalbumin, respectively. The relative standard deviations of seven replicate measurements were 1.75% for 1.0 g mL^–1 BSA, 1.90% for 1.0 g mL^–1 HSA, 1.65% for 1.0 g mL^–1 -G, and 2.32% for 1.0 g mL^–1 ovalbumin.     

Optical Nanocomposite Planar Waveguides Doped with Rare-Earth and Noble Metal Elements

The present paper is focused on multilayer Er³⁺-doped silica-titania planar waveguides, co-doped with silver, which were prepared by spin-coating on silica glass, or buffered single crystal silicon substrates. The single layer thickness (0.4 m) and refractive index (1.60–1.63) were measured by spectroscopic ellipsometry at 715 nm. The thickness of the waveguides (measured by mechanical profilometry) was 1 m and their optical propagation losses were measured at different laser wavelengths (488 nm, 514 nm and 633 nm), exhibiting an approximately Rayleigh-like behavior. The thermal precipitation of silver nanocrystallites was achieved, both in air and under a controlled atmosphere (dry nitrogen) and these were characterized by visible absorption spectroscopy, which clearly showed the development of a plasmon absorption band near 415 nm, by X-ray diffraction (XRD) and Transmission Electron Microscopy (TEM). The Er³⁺ metastable level lifetimes for the emission at ca. 1.54 m were found to be ca. 4–6 ms, for Er³⁺ concentrations varying between 0.2–2.0 mol% (or (0.4–4.4) × 10²⁰ ions/cm³), but no significant variation was observed with the Ag concentration added (up to 2.5 mol%).     

The reaction of [PPN][(μ2-H)Os3(CO)10(μ2-CO)] with EPh3 (E=P or As) to form the intermediate [PPN][Os3(CO)9(ν2-CHO)(EPh3)]

The anion, [(₂-H)Os₃(CO)₁₀(₂-CO)]^–, reacts with the donor ligand EPh₃ (E=P or As) to produce, as an intermediate in the reaction to the substituted anion [(₂-H)Os₃(CO)₉(₂-CO)(EPh₃)]^–, a moderately stable formyl derivative which we tentatively formulate as [Os₃(CO)₉(²-CHO)(EPh₃)]^–.     

Quantitative chemical analysis on paper. I

Summary A method has been proposed for the determination of small quantities of Cl^–, SCN^– and I^– in mixtures. The method is based on the use of filter paper evenly impregnated with Ag₂CrO₄. The method permits the determination of 5 to 50g of Cl^–; 15 to 100g of I^– and 10 to 150g of SCN^– with an accuracy of 1.5%.The method may also be used for determination of SCN^– alone.

---

Zusammenfassung Ein Verfahren für die Bestimmung kleiner Mengen Chlorid, Rhodanid und Jodid in deren Gemischen wird vorgeschlagen. Es beruht auf der Verwendung eines mit Silberchromat gleichmäßig imprägnierten Filtrierpapierstreifens und ermöglicht die Bestimmung von 5 bis 50g Chlorid,15 bis 100g Jodid und 10 bis 150g Rhodanid mit einer Genauigkeit von 1,5%. Das Verfahren kann auch für die Bestimmung von Rhodanid allein verwendet werden.

---

Résumé On a proposé une méthode pour le dosage de petites quantités de Cl^–, SCN^–, et I^– en mélanges. La méthode est fondée sur l'emploi d'un papierfiltre uniformément imprégné d'Ag₂CrO₄. Elle permet le dosage de 5 à 50g de Cl^–, 15 à 100g d'I^– et de 10 à 150g de SON^–, à la précision de 1,5%. On peut aussi utiliser la méthode pour le dosage de SCN^– seul.

     

Sorption kinetics of tributyltin on Elbe river biofilms

For the first time detailed sorption kinetics of tributyltin on native Elbe river biofilms are presented. For this purpose a modified annular rotating continuous flow reactor has been used to develop a reproducible biofilm. Important parameters, such as flow rates, sheer forces, and nutrient concentrations could be varied independently and adjusted to natural conditions. Time-resolved sorption kinetics have been carried out with tributyltin, the most toxic compound in many antifouling paints. The highest sorption rates of tributyltin were observed during the first 0–10 min (0.60±0.05 g Sn m^–2min^–1) than they decreased to a value of 0.10±0.10 g Sn m^–2min^–1 (10–90 min) and increased to a value of 0.20±0.05 g Sn m^–2min^–1 (90–120 min).     

Photometric detection of cyclodextrins in liquid chromatography by using iodine generated electrochemically in-situ

A method has been developed for photometric detection of cyclodextrins (CD) in liquid chromatography using iodine (I₂) generated electrochemically in-situ. Iodide ion in the mobile phase was electrochemically oxidized to I₂ which was subsequently reacted with I^–, in an electrochemical flow cell, forming I₃^–. The absorbance of I₃^– was found to be greatly enhanced when CD were present in the mobile phase. The absorbance enhancement was caused by the change in the mole fraction of I₃^–, because of the inclusion reaction of I₃^– with CD. On the basis of this phenomenon, CD were detected by means of a photodiode-array UV–visible detector positioned downstream of the electrochemical flow cell. The signals were found to be linearly dependent on CD concentration. Because the formation constants of I₃^– with CD decrease in the order -CD>-CD>-CD, -CD was most detectable by the method. Detection limits were 1.0 mol L^–1 for -CD, 65 mol L^–1 for monoG1--CD, 100 mol L^–1 for -CD, and 200 mol L^–1 for -CD.     

Synthesis,spectroscopic studies and magnetic properties of binuclear complexes of the first transition series cations bridged by 2,2′-bipyrimidine

Binuclear complexes [M₂Cl₄(-bpym)], where M = VO²⁺, Fe^II, Co^II or Cu^II and bpym = 2,2-bipyrimidine, and [M₂(hfacac)₄(-bpym)] complexes, where hfacac = hexafluoroacetylacetonate and M = Fe^II, Ni^II or Co^II have been synthesized and characterized by chemical analysis, conductance measurements, i.r., electronic and e.p.r spectroscopies and by magnetic susceptibility measurements (in the 4.2–291K range). Co^II and Fe^II are in a high spin state. [(VO)₂Cl₄(-bpym)] is paramagnetic, without significant interactions. [Fe₂Cl₄(-bpym)] shows a singular behaviour explained by an antiferromagnetic intradimer exchange and a ferromagnetic interdimer interaction. All other complexes are antiferromagnetic, with an intramolecular exchange parameter, J, varying from –3.3 cm^–1 for Co^II/math> to –109 cm^–1 for Cu^II.     

Determination of traces of sodium alkylbenzenesulphonate by high-performance liquid chromatography. Application to water

Summary For the trace determination of sodium alkylbenzenesulphonate (ABS) by HPLC the following conditions were employed: Shimadzu ZORBAX SIL Column (5 m, 4.6 mm i.d. x 150 mm) as stationary phase, 0.2% ammoniaethanol (v/v) as mobile phase, UV detector at 225 nm, injection volume 12 l. The chromatograms of ABS were simple and sharp (detection limit of ABS 0.02 g in 12 l of ethanol). The calibration curves of ABS were linear in a concentration range of 0.03 0.3 g in 12 l of ethanol. In the case of linear sodium dodecylbenzenesulphonate positive errors of 1 4% were caused by non-ionic surfactants or laurylsulphate (6 times excess), 10 50% positive errors were caused by 2 6 times excess of household detergents.Standard water samples containing ABS were treated with a weak base anion-exchange resin, the adsorbed ABS were eluted, and then determined either by HPLC or by the methylene blue spectrophotometric method. Recoveries of ABS in water were about 92 107% by HPLC.

---

Bestimmung von Spuren Natriumalkylbenzolsulfonat mit Hilfe der HPLC. Anwendung auf Wasser

Zusammenfassung Für die Spurenbestimmung von Natriumalkylbenzolsulfonat (ABS) durch HPLC werden die folgenden Bedingungen empfohlen:Shimadzu ZORBAX SIL (5 m, 4,6 mm x 150 mm) als stationäre Phase, 0,2% Ammoniak/Ethanol als mobile Phase, UV-Detektor bei 225 nm, Injektionsvolumen 12 l. Die erhaltenen Chromatogramme sind einfach und scharf (Nachweisgrenze 0,02 g in 12 ml Ethanol). Die Eichkurven sind im Konzentrationsbereich von 0,03–0,3 g in 12 l Ethanol linear. Im Falle des linearen Natriumdodecylbenzolsulfonats werden bei Anwesenheit von nicht-ionischen oberflächenaktiven Substanzen oder von Laurylsulfat in 6fachem Überschuß positiver Fehler von 1–4% erhalten; bei 2–6fachem Überschuß von Haushaltswaschmitteln ergeben sich positive Fehler von 10–50%.Standard-Wasserproben werden zunächst einer Behandlung mit einem Anionenaustauscher unterzogen, die adsorbierten ABS eluiert und durch HPLC oder nach der Methylenblaumethode analysiert. Wiederfindungsraten liegen bei 92–107%.