Raman of indigo on a silver surface. Raman and theoretical characterization of indigo deposited on silicon dioxide-coated and uncoated silver nanoparticles

Raman, surface-enhanced Raman scattering, and shell isolated nanoparticles-enhanced Raman scattering techniques were used to study the indigo–nanoparticle interaction nature. Silver nanoparticles were employed with and without a silicon dioxide spacer inert layer. The SERS spectral profile, obtained using silver nanoparticles, is different from the Raman one, which led to the proposition that the indigo–silver interaction is in the range of intermolecular interactions. SERS spectral reproducibility suggests identical organization and orientation of the analyte on the metal surface. The shell isolated nanoparticles enhanced Raman scattering spectrum of indigo, obtained by using silicon dioxide coated silver nanoparticles resulted similar to its Raman spectrum. This result indicates that the indigo structure is chemically unmodified by the silicon dioxide-coated silver surface. From the shell-isolated nanoparticles-enhanced Raman scattering experiments, the electromagnetic mechanism is proposed as the reason for the spectral enhancement. Theoretical calculations allow one to infer both the indigo–silver surface interaction nature and the orientation of indigo on the surface.     

Enhancement of Raman scattering of light by ultramarine microcrystals in presence of silver nanoparticles

Approximately 10²‐fold enhancement of Raman scattering by ultramarine microcrystals is reported by means of interaction with silver nanoparticles in films and powders. Theoretical modeling predicts the maximal 10¹⁰‐fold enhancement in close vicinity of a silver spherical nanoparticle (0.24 nm) with rapid decay of enhancement factor to 1 in the range of approximately 50 nm. Experimental enhancement factor is treated as overall effect within the small portion of every microcrystal in the close vicinity of silver nanoparticle(s). The results are considered as an important extension of traditional surface enhanced molecular Raman spectroscopy towards bigger inorganic probes. Copyright © 2012 John Wiley & Sons, Ltd.     

Sensitive surface-enhanced Raman scattering substrates based on anti-pyramidal gold architectures decorated with silver nanoparticles

Abstract

A micro-structured gold surface, consisting of a periodic square–based anti–pyramidal array (Klarite) with a smooth boundary surface on which silver nanoparticles (diameter: 60?nm) were deposited, produced an active surface enhanced Raman scattering substrate. With p-aminothiophenol as a probe molecule, the Raman activity of the micro–structured surface was compared before and after deposition of the silver nanoparticles. Experimental results show that the Raman spectra on the silver/p-aminothiophenol/Klarite structure is stronger than that on the silver/p-aminothiophenol/gold film and the Raman spectra on the silver/p-aminothiophenol/gold film is stronger than that on silver/p-aminothiophenol, p-aminothiophenol/Klarite structure, p-aminothiophenol/gold film, which is confirmed by numerical simulations. A similar result is obtained with crystal violet as test molecule.     

Piperidine adsorption on two different silver electrodes: A combined surface enhanced Raman spectroscopy and density functional theory study

The surface enhanced Raman scattering (SERS) spectra of piperidine in silver colloid solution, on roughened silver electrode and on roughened silver electrode modified with silver nanoparticles were studied, and the high-quality SERS spectra of piperidine on roughened silver electrode modified with silver nanoparticles were obtained for the first time. Surface selection rules derived from the EM enhancement model were employed to deduce piperidine orientations on the different surfaces. On the basis of this, two models of piperidine adsorbed on the surface of the silver nanoparticles were built, and DFT-B3PW91/LanL2dz was applied to calculate the Raman frequencies. It proves that, at higher potential values, the piperidine is perpendicularly standing on the roughened silver electrode surface though its lone-electron pair, but in silver colloid solution and on the silver nanoparticles modified silver electrode the piperidine molecular lies flat on the silver surface. In the meantime, the potential dependent SERS of piperidine on the modified electrode were studied.     

Characterization and optimization of AuNPs labeled by Raman reporters on glass based on silver enhancement

In this report, gold nanoparticles (AuNPs) labeled by Raman reporters (AuNPs‐R6G) were assembled on glass and used as the seeds to in situ grow silver‐coated nanostructures based on silver enhancer solution, forming the nanostructures of AuNPs‐R6G@Ag, which were characterized by scanning electron microscopy (SEM) and UV‐visible spectroscopy. More importantly, the obtained silver‐coated nanostructures can be used as a surface enhancement Raman scattering (SERS) substrate. The different SERS activities can be controlled by the silver deposition time and assembly time of AuNPs‐R6G on glass. The results indicate that the maximum SERS activity could be obtained on AuNPs‐R6G when these nanostructures were assembled on glass for 2 h with silver deposition for 2 min. In addition, the reproducibility of SERS signal on the fabricated nanostructures is very high with the intensity error lower than 15%, which has great promise as a probe for application in bioanalysis. Copyright © 2008 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering of N‐acetylneuraminic acid on silver nanoparticle surface

N‐Acetylneuraminic acid (sialic acid, Neu5Ac) has recently gained interest as a potential marker for a variety of pathophysiological processes, although no Raman study has been reported for this important biomolecule. In this paper, the vibrational properties of Neu5Ac were studied by means of Raman, surface‐enhanced Raman scattering (SERS), and density functional theory calculations. By adsorption of Neu5Ac on silver nanoparticle surface, strongly enhanced Raman intensities are obtained, allowing easy measurement of small amounts of aqueous Neu5Ac (10 µl of a 10⁻⁷ m solution) utilizing low laser power and short exposure time. The mechanism of adsorption of Neu5Ac on the silver surface is discussed on the basis of the experimental and theoretical results. This study demonstrates that SERS can provide an effective tool for development of a label‐free, rapid, and sensitive optical platform for identification of Neu5Ac. Copyright © 2014 John Wiley & Sons, Ltd.     

Isolated NAnoparticle Raman Spectroscopy

Coupling of confocal Raman microscopy and atomic force microscopy provides an experimental tool to perform isolated nanoparticle Raman spectroscopy on Co₃O₄ nanoparticles dispersed on Al₂O₃ microparticles, avoiding the use of solvents or polymeric additives. Single Co₃O₄ nanoparticles showed similar Raman spectrum to that of single crystal or bulk systems. Surprisingly, redshift and broadening of Raman vibrational modes were observed for agglomerated nanoparticles. Nonlinear relationships of Raman shift and full width at half maximum on the agglomeration of the Co₃O₄ nanoparticles have been experimentally determined. These results clearly indicate that proximity effects between nanoparticles in the agglomerate modify optical properties and Raman response. Nanoparticle agglomeration must then be taken into account for the understanding of nanoscale response in oxidic materials. Copyright © 2012 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering assessment of DNA from leaf tissues adsorbed on silver colloidal nanoparticles

In this work, the surface‐enhanced Raman scattering (SERS) spectra of seven genomic DNAs from leaves of chrysanthemum (Dendranthema grandiflora Ramat.), common sundew (Drosera rotundifolia L.), edelweiss (Leontopodium alpinum Cass), Epilobium hirsutum L., Hypericum richeri ssp. transsilvanicum (Čelak) Ciocârlan, rose (Rosa x hybrida L.) and redwood (Sequoia sempervirens D. Don. Endl.), respectively, have been analyzed in the wavenumber range 200–1800 cm⁻¹. The surface‐enhanced Raman vibrational modes for each of these cases, spectroscopic band assignments and structural interpretations of genomic DNAs are reported. A high molecular structural information content can be found in the SERS spectra of these DNAs from leaf tissues. Based on this work, specific plant DNA–ligand interactions or accurate local structure of DNA might be further investigated using surface‐enhanced Raman spectroscopy. Besides, this study will generate information which is valuable in the development of label‐free DNA detection for chemical probing in living cell. Copyright © 2013 John Wiley & Sons, Ltd.     

Photochemical decoration of silver nanoparticles on ZnO nanowires as a three‐dimensional substrate for surface‐enhanced Raman scattering measurement

To increase the sensitivity in surface‐enhanced Raman scattering (SERS) measurement, a three‐dimensional (3D) SERS substrate was prepared by the decoration of silver nanoparticles (AgNPs) on the side walls of ZnO nanowires. The prepared 3D SERS substrates provide the advantages of highly loaded density of AgNPs, with a large specific surface area to interact with analytes, and the ease for the analytes to access the surfaces of AgNPs. To prepare the substrates, ZnO nanowires were first grown on a glass plate by wet chemical method. By treating SnCl₂ on the surfaces of ZnO nanowires, Ag seeds could be formed on the side wall of the ZnO nanowires, which were further grown to a suitable size for SERS measurements via photochemical reduction. To optimize and understand the influences of the parameters used in preparation of the substrates, the reaction conditions were systematically adjusted and examined. Results indicated that AgNPs could be successfully decorated on the side wall of the ZnO nanowires only by the assistances of SnCl₂. The size and density of AgNPs were affected by both the concentration of silver nitrate and the irradiation time. With optimized condition, the prepared 3D substrates provided an enhancement factor approaching 7 orders of magnitude compared with conventional Raman intensity. Copyright © 2014 John Wiley & Sons, Ltd.     

电化学体系中吸附在金电极表面吡啶的紫外拉曼光谱研究

观察到波长为325nm的紫外光激发下吸附在金电极表面的吡啶的表面增强拉曼光谱(SERS)。结合其SERS谱随电位的变化关系,分析了其中的增强机制并表明随电位的负移吡啶的吸附方式发生改变。     

Phase dispersion of Raman and Rayleigh-enhanced four-wave mixings in femtosecond polarization beats

Based on color-locking noisy field correlation in three Markovian stochastic models, phase dispersions of the Raman- and Rayleigh-enhanced four-wave mixing (FWM) have been investigated. The phase dispersions are modified by both linewidth and time delay for negative time delay, but only by linewidth for positive time delay. Moreover, the results under narrowband condition are close to the nonmodified nonlinear dispersion and absorption of the material. Homodyne and heterodyne detections of the Raman, the Rayleigh and the mixing femtosecond difference-frequency polarization beats have also been investigated, separately.     

Investigation of stimulated rotational Raman scattering of the high-power broadband laser with applied angular dispersion

Smoothing by spectral dispersion （SSD） leads to considerable improvement on laser-irradiation uniformity in far field for fusion lasers. Phase modulation in time and spectral angular dispersion （SAD） across the beam introduced by SSD will affect the stimulated rotational Raman scattering （SRRS） gain in the near field. This paper focuses on the influence of SAD on SRRS gain under different laser conditions. Results show that the SAD will aggravate the generation of SRRS when the laser initial additional phase is constant. On the contrary, the SAD can reduce the SRRS gain if appropriate SSD parameters are adopted when the laser initial additional phase is variable. SSD has a certain application prospect in SRRS suppression.     

Effects of the agglomeration state on the Raman properties of Co3O4 nanoparticles

The features of the Raman spectra of Co₃O₄ 30‐nm nanoparticles depend strongly on their agglomeration state. When measured at low incident laser power, the spectrum of isolated nanoparticles corresponds to that found in bulk materials, whereas the agglomerated nanoparticles present a clear red‐shift and broadening of the Raman bands. On the other hand, when measured at even lower power, both agglomerated and isolated nanoparticles show the same spectrum of microscopic particles. These effects have been studied by variations of the 532‐nm laser power and the environmental temperature. The thermal dependence of Raman spectra of agglomerated nanoparticles is different to that of isolated nanoparticles but is comparable to the one of bulk material. The different behaviour of the nanoparticles at different agglomeration state is associated to the transmission of phonons among the particles. On the other hand, an increase of the laser power causes a larger number of acoustic phonons, producing a variation of the vibration anharmonicity of the nanoparticles. This increase is more pronounced in the agglomerated nanoparticles, due to the transmission of phonons, causing a much intense modification of the Raman spectrum produced by the laser power. These results clearly indicate that the agglomeration state of the nanoparticles affects their Raman properties. Copyright © 2012 John Wiley & Sons, Ltd.     

Surface enhanced Raman scattering of 2-cyanopyridine adsorbed on silver colloidal particles

Surface-enhanced Raman scattering (SERS) spectra of 2-cyanopyridine (2 CP) adsorbed on silver colloidal particles have been investigated. The prominent SERS bands are observed at 556, 612, 778, 1002, 1060, 1072, 1150 and 1240 cm⁻¹. The absolute enhancement factor of the Raman signals in SERS studies has been estimated to be of the order of 10²–10⁵ for various bands. The 2CP molecules have been ascribed to adsorb on colloidal particles in standing up fashion.     

SERS of the anti‐inflammatory drug piroxicam adsorbed on the surface of silver or gold colloids as nanocarrier model

Piroxicam is a non‐steroidal anti‐inflammatory drug actually used with limitations because of serious side effects. It is poorly soluble in pure water and exhibit a minimum of four conformers according to the pH conditions of the solution, but not all of them are medically active. In this study, we present, firstly, the Raman characterization of piroxicam in different organic solvents (dimethyl sulfoxide, 1,4‐dioxane, ethanol, 1‐propanol). These results have permitted us to analyze surface‐enhance Raman scattering spectra of piroxicam adsorbed on gold or silver nanoparticles surface at several pHs (1, 2, 4, and 7), imitating the environment of the drug in the body, either in the gastrointestinal tract or in healthy and disease tissues. Results indicate that, below pH = 7, piroxicam is mainly in the zwitterionic conformer, and molecules are oriented parallel to the noble metal surface; however at pH ≥ 7, the main specie detected is the anionic one, differently oriented with respect to the nanoparticle surface. The metal‐piroxicam systems here characterized by surface‐enhance Raman scattering spectroscopy could constitute nanocarriers in future projects of transporting and releasing of the drug in the body. Copyright © 2015 John Wiley & Sons, Ltd.     

Adsorption of purpald SAMs on silver and gold electrodes: a Raman mapping study

The adsorption modes of 4‐amino‐3‐hydrazino‐5‐mercapto‐1,2,4‐trizole (purpald) self‐assembled monolayers (SAMs) formed on SERS‐active silver and gold electrodes were comparatively studied using surface‐enhanced Raman scattering (SERS), and the self‐assembling procedures were investigated by the Raman mapping technique. Purpald SAMs adopted a titled orientation with S, N2 atoms anchoring to the silver electrode and the  N7H₂ close to the surface, whereas purpald stood up on the gold electrode through S, N5 atoms and with  N8H₂ adjacent to the surface. The density functional theory (DFT) at the level of B3LYP was performed to help explain their different adsorption behaviors on the silver and gold electrodes. Copyright © 2006 John Wiley & Sons, Ltd.     

Raman scattering of L‐tryptophan enhanced by surface plasmon of silver nanoparticles: vibrational assignment and structural determination

Vibrational bands of L ‐tryptophan which was adsorbed on Ag nanoparticles (∼10 nm in diameter) have been investigated in the spectral range of 200–1700 cm⁻¹ using surface‐enhanced Raman scattering (SERS) spectroscopy. Compared with the normal Raman scattering (NRS) of L ‐tryptophan in either 0.5 M aqueous solution (NRS‐AS) or solid powder (NRS‐SP), the intensified signals by SERS have made the SERS investigation at a lower molecular concentration (5 × 10⁻⁴ M ) possible. Ab initio calculations at the B3LYP/6‐311G level have been carried out to predict the optimal structure and vibrational wavenumbers for the zwitterionic form of L ‐tryptophan. Facilitated with the theoretical prediction, the observed vibrational modes of L ‐tryptophan in the NRS‐AS, NRS‐SP, and SERS spectra have been analyzed. In the spectroscopic observations, there are no significant changes for the vibrational bands of the indole ring in either NRS‐AS, NRS‐SP, or SERS. In contrast, spectral intensities involving the vibrations of carboxylate and amino groups are weak in NRS‐AS and NRS‐SP, but strong in SERS. The intensity enhancement in the SERS spectrum can reach 10³–10⁴‐fold magnification. On the basis of spectroscopic analysis, the carboxylate and amino groups of L ‐tryptophan are determined to be the preferential terminal groups to attach onto the surfaces of Ag nanoparticles in the SERS measurement. Copyright © 2008 John Wiley & Sons, Ltd.     

Thiol‐immobilized silver nanoparticle aggregate films for surface enhanced Raman scattering

We report a novel method for the fabrication of films of silver nanoparticle aggregates that are strongly attached to Si substrates (Thiol‐immobilized silver nanoparticle aggregates or TISNA). The attachment is achieved by chemically modifying the surface of a Si(100) surface in order to provide SH groups covalently linked to the substrate and then aggregating silver nanoparticles on these thiol covered surfaces. The transmission electron microscopy (TEM), scanning electron microscopy (SEM) and atomic force microscopy (AFM) characterization show a high coverage with single nanoparticles or small clusters and a partial coverage with fractal aggregates that provide potential hot spots for surface enhanced Raman scattering (SERS). We have confirmed the SERS activity of these films by adsorbing rhodamine 6G and recording the Raman spectra at several concentrations. By using the silver‐chloride stretching band as an internal standard, the adsorbate bands can be normalized in order to correct for the effects of focusing and aggregate size, which determine the number of SERS active sites in the focal area. This allows a quantitative use of SERS to be done. The adsorption–desorption of rhodamine 6G on TISNA films is reversible. These features make our TISNA films potential candidates for their use in chemical sensors based on the SERS effect. Copyright © 2008 John Wiley & Sons, Ltd.     

Chromatographic paper embedded with silver nanostructure as a disposable substrate for surface‐enhanced Raman spectroscopy and catalytic reactor

The high cost of regular diagnostic kits severely impeded its uses for routine clinical assay and fieldworks. A cost‐effective chromatography paper is chemically modified with Ag nanostructures using the simple electroless silver deposition, producing a scalable and disposable substrate for surface‐enhanced Raman spectroscopy, as well as a large scale of catalytic active sites over many chemical reactions. Synergetic measurement including surface‐enhanced Raman spectroscopy and laser desorption ionization‐mass spectrometry is performed on Ag decorated filter paper using a thiol containing compound as indicator, allowing for the acquisition of spatially correlated spectroscopy in the tandem mode. In addition, hydrophilic porous cellulose network that contains a certain amount of liquid naturally served as a chemical reactor for molecular transport and reaction. Positive results from catalytic reaction on metallized paper convincingly demonstrated that total microanalysis system on paper (μ‐TASoP), as a compelling alternative would find a wide breadth of applications in developing disposable medical devices and customary laboratory assays. Copyright © 2015 John Wiley & Sons, Ltd.     

Adsorption and catalysis of flavonoid quercetin on different plasmonic metal nanoparticles monitored by SERS

Raman and surface‐enhanced Raman scattering spectroscopy were used to follow the chemical modification of quercetin (QUC) on silver nanoparticles. Different metallic systems were fabricated to check the influence of the interface, in terms of electric charge or total available surface, on the catalytic change undergone by QUC. The effect of QUC surface coverage was crucial to reveal information about the different orientation and the interaction mechanism with the metal at different concentrations of this flavonoid. Surface‐enhanced Raman scattering spectra of good quality of QUC were observed at concentrations down to 10^–8 M. Chemical modifications in the presence of nanostructure metal surfaces include oxidation followed by a subsequent polymerization via a condensation of rings whereas different chemical species have been recognized under different experimental conditions. The assignment of the new species formed on the metal surface was conducted. Copyright © 2012 John Wiley & Sons, Ltd.