Determination of zinc dialkyldithiocarbamates in latex condoms

A simple high-performance liquid chromatographic (HPLC) assay is developed for measuring zinc dialkyldithiocarbamate (DTC) levels in latex condoms. After extraction of 14 different brands of latex condoms in acetonitrile, aliquots of the extracts are subjected to a preliminary screening assay by treatment with cobalt chloride and measurement of UV absorption at 320 nm, which results in the identification of 6 DTC-containing samples. Prior to analysis by HPLC, zinc dimethyldithiocarbamate (ZDMC) or zinc diethyldithiocarbamate (ZDEC) is added to the extracts in order to block transmetalation reactions with the analytes of interest. A reversed-phase C(18) column, with gradient elution and UV detection at 260 nm, is used to measure the zinc DTCs. The limits of detection for ZDEC and zinc dibutyldithiocarbamate (ZDBC) are 5 and 10 micro g/mL. Levels of ZDBC and ZDEC range from not detectable to 3.31 and 1.79 mg/condom, respectively. Total protein and latex allergenic protein levels are determined and range from 98 to 776 and 0.01 to 14.04 micro g/unit, respectively, but are not related to the level of ZDBC or ZDEC. This methodology provides both screening and specific tools for the determination of unstable zinc DTC complexes in latex products.     

A reduction—spectrophotometric method for the determination of sulphate in waters

The sulphate is reduced by tin(II) chloride in hydriodic acid to hydrogen sulphide which is swept by nitrogen into a buffered solution of bis(2,9-dimethyl-1,10-phenanthroline) copper(II) ion. The resulting copper(I) complex is measured spectrophotometrically. With sample volumes between 10 and 1000 μl, the limit of detection is 0.5 μg of sulphate. Formation of the stable complex is immediate and the reduction system can be used repeatedly. The method is applicable to fresh, estuarine and marine waters.     

Improvement of ion chromatography with ultraviolet photometric detection and comparison with conductivity detection for the determination of serum cations

Studies were made of the analytical conditions required for indirect photometric ion chromatography using ultraviolet photometric detection (UV method) for the determination of serum cations following a previously developed serum pre-treatment. The sensitivities of the conductivity detection (CD) and UV methods and the amounts of serum cations determined by both methods were compared. Attempts to improve the sensitivity of the conventional UV method are reported. It was found that the mobile phase previously reported by Small and Miller showed no quantitative response when more than 4 mM copper(II) sulphate pentahydrate was used. As a result, there was no significant difference in the amounts of serum cations shown by the CD and UV methods. However, by adding 0.5-5 mM cobalt(II) sulphate heptahydrate, nickel(II) sulphate hexahydrate, zinc(II) sulphate heptahydrate or cobalt(II) diammonium sulphate hexahydrate to 0.5-1.5 mM copper(II) sulphate pentahydrate, higher sensitivity and a quantitative response were attained.     

Determination of ultra-trace levels of cobalt by ion chromatographic separation and chemiluminescence detection

A luminol chemiluminescence detection/flow injection analysis technique coupled with ion chromatography (IC) has been examined for the selective determination of cobalt (II) at pg ml^?1 levels. A barium chloride solution was used as an eluent in the IC to separate cobalt(II) from interferents. When a 100-μ1 sample injection volume was used, the detection limit was 1.0 pg ml^?1 cobalt; the minimum detectable amount of cobalt was 100 fg. The calibration graph was linear above 10 pg ml^?1 and the linear dynamic range extended over six orders of magnitude. The relative standard deviation for ten replicate measurements of 30 pg ml^?1 cobalt was 3.8%. The results of the analysis of a synthetic sample corresponding to a boiling-water reactor coolant and some commercially available copper(II) standard solutions are given.     

Copper(II)chloride Catalyzed Tetrahydropyranylation of Alcohols

A simple and efficient methodology for the tetrahydropyranylation of alcohols using catalytic amount of copper(II)chloride in dichloromethane is described. The yields obtained are good to excellent.     

Hydrolytic ring opening reactions of anhydrides for first row transition metal dicarboxylate complexes

Ring opening reactions of 2,3-pyridine dicarboxylic anhydride are studied with hydrated salts of cobalt, nickel and zinc. The hydrated metal salts preferentially hydrolyze 2,3-pyridine dicarboxylic anhydride rather than causing esterification in methanol medium. Hydrolytic opening of 2,3-pyridine dicarboxylic anhydride by hydrated cobalt(II) acetate and nickel(II) acetate resulted in the corresponding chelate complexes of monodeprotonated 2,3-pyridine dicarboxylic acid. The reaction of copper acetate with pyromellitic dianhydride in the presence of 1,10-phenanthroline gives a dinuclear copper complex whereas a similar reaction with copper(II) chloride gives a mononuclear copper complex.     

Application of Total Reflection X-Ray Fluorescence Spectrometry in the Textile Industry

 In the present study, the determination of arsenic, lead, cadmium, chromium, cobalt, copper, nickel, mercury and zinc in various cloth samples produced in Kayseri-Turkey was performed after extraction with artificial sweat solution and decomposition with nitric acid. TXRF is shown to be suitable for the determination of 7 trace elements, down to the 0.001 (cobalt) to 0.004 (copper) mg/kg level in textile extract except for mercury and cadmium. The extractable part of the toxic metals by artificial sweat solution is relatively low. In a few extracts the concentration values of Pb and Ni have exceeded their critical values of 0.2 mg/kg for lead and 1.0 mg/kg for nickel given by ?ko-Tex and determined for babys cloths. In addition, it was observed that the element pattern of textile samples resembled ‘finger print type’, TXRF-spectra. This technique can also be used for the identification of textile sample in forensic investigation. Received April 16, 2001 Revision October 1, 2001.     

Crystal structures of triazine-3-thione derivatives by reaction with copper and cobalt salts

The reaction of 5-methoxy-5,6-diphenyl-4,5-dihydro-2H-[1,2,4]triazine-3-thione L1H2OCH3 with copper(II) chloride leads to the formation of an organic molecule L2 containing two triazine rings linked by a new S-S bond. A binuclear copper(II) complex, 1, containing L1 is also isolated. The reaction of L1H2OCH3 with copper(I) chloride yields a hexanuclear cluster of copper(I), 2, in which the copper atoms form a distorted octahedron with the ligand L1 acting as an NS chelate and sulfur bridge, giving to the copper ion a trigonal geometry by one N and two S atoms. In any reaction of the disulfide L2 with metal salts, complexes containing this molecule are isolated. Reactions with copper(I) and copper(II) chloride and nickel(II) and cadmium(II) nitrate produce the S-S bond cleavage, giving complexes containing the triazine L1 behaving as the NS anion, which show spectroscopic characteristics identical with those formed by reaction with L1H2OCH3. However, the reaction with cobalt(II) nitrate gives a low-spin octahedral cobalt(III) complex, in which an asymmetric rupture of the disulfide L2 has been produced, giving an unexpected complex with a new ligand and keeping the S-S bond.     

Adsorption of mercury(II) on macroreticular styrene-divinylbenzene copolymer beads

The adsorption characteristics of mercury(II) on several kinds of styrene-divinylbenzene copolymer beads having different surface properties were studied. It was found that the polymer beads selectively adsorbed mercury(II) from solutions over a wide range of pH with high efficiency. The amount of mercury(II) adsorbed increased with increase in specific surface area of the polymer beads and the adsorption behaviour was found to be of the Langmuir type. The presence of chloride strongly reduced the adsorption, but this interference was not observed with nitrate, sulphate, perchlorate, cadmium(II), cobalt(II), copper(II), nickel(II), silver(I) and zinc(II). More than 95% of the mercury(II) adsorbed on a column of polymer beads could be recovered with dilute hydrochloric acid.     

Retention,direct detection,and quantitation of palladium (II) using high-performance liquid chromatography and evaporative light scattering detection

This study demonstrates the use of high-performance liquid chromatography and evaporative light scattering detection for the direct detection and quantitation of palladium II. After evaluating the effects of buffer concentration and pH, the separation of cobalt II, copper I, copper II, nickel II, and palladium II was accomplished using a Chromolith® Performance SI monolithic column with a hydrophilic interaction chromatography mode gradient elution. Typical validation parameters were evaluated to assess the method’s quantitative performance for palladium II which included specificity, accuracy, precision, linearity, stability, and limit of detection. This technique provides a unique and practical alternative method for the accurate quantitation of palladium II.     

Adduct simplification in the analysis of cyanobacterial toxins by matrix-assisted laser desorption/ionization mass spectrometry

A novel method for simplifying adduct patterns to improve the detection and identification of peptide toxins using matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) mass spectrometry is presented. Addition of 200 microM zinc sulfate heptahydrate (ZnSO(4) . 7H(2)O) to samples prior to spotting on the target enhances detection of the protonated molecule while suppressing competing adducts. This produces a highly simplified spectrum with the potential to enhance quantitative analysis, particularly for complex samples. The resulting improvement in total signal strength and reduction in the coefficient of variation (from 31.1% to 5.2% for microcystin-LR) further enhance the potential for sensitive and accurate quantitation. Other potential additives tested, including 18-crown-6 ether, alkali metal salts (lithium chloride, sodium chloride, potassium chloride), and other transition metal salts (silver chloride, silver nitrate, copper(II) nitrate, copper(II) sulfate, zinc acetate), were unable to achieve comparable results. Application of this technique to the analysis of several microcystins, potent peptide hepatotoxins from cyanobacteria, is illustrated.     

A potentiometric study of the oxidation of cobalt(II) with gold(III) chloride in presence of 1,10 phenanthroline or 2,2'-bipyridine : A new titration of cobalt (II) and its application to nickel-base alloys

The redox reaction between cobalt(II) and gold(III) chloride in the presence of 1.10-phenanthroline or 2,2'-bipyridine was studied, and a titration of the cobalt(II) complex with a gold(III) chloride solution was developed. A 4-fold amount of 1,10-phenanthroline or 2,2'-bipyridine was necessary for rapid quantitative reaction; the permissible pH range was 1.5–5. The oxidation of the cobalt(II) complex proceeds rapidly at 40–50°C, and a direct potentiometric titration was possible. The following maximum errors were obtained: 3.3% for 0.2–1.0 mg Co, 2.0% for 1–5 mg Co, and 0.70% for 10–40 mg Co. The following ions did not interfere: Ni(II), Zn(II), Pb(II), Cd(II), Mn(II), Fe(II), Cr(III), Al(III), Th(IV), Se(IV), Ti(IV), U(VI), Mo(VI), SO^2-₄ and PO^3-₄. Even small quantities of silver(I), copper(II), palladium(II), mercury(II)and iron(III) interfered. The method was applied to the determination of high cobalt contents in high-temperature nickel-base alloys.     

Synthesis and spectral characterization of zinc(II), copper(II), nickel(II) and manganese(II) complexes derived from <Emphasis Type="Italic">bis</Emphasis>(2-hydroxy-1-naphthaldehyde) malonoyldihydrazone

The present study shows that the reaction of different salts of the same metal with sterically crowded dihydrazone bis(2-hydroxy-1-naphthaldehyde)malonoyldihydrazone (CH₂LH₄) in ethanol/aqueous media gives complexes of different stereochemistry. While the reaction of zinc(II) and copper(II) sulphate with dihydrazone yields tetrahedral complexes, the zinc(II) and copper(II) chlorides give square pyramidal and distorted octahedral complexes, respectively. On the other hand, nickel(II) sulphate and chloride, both give high-spin octahedral complexes with dihydrazone, manganese sulphate gives low-spin octahedral and manganese(II) chloride gives high-spin octahedral complexes. The reaction of these complexes with KF has been investigated. All of the products have been characterized by analytical, magnetic moment and molar conductivity data. The structures of the complexes have been established by spectroscopic studies.     

Synthesis and characterisation of copper(II) hydroxide gels

The formation of copper(II) hydroxide gels from aqueous precursors requires very critical conditions. Gels have been obtained by adding ammonia to aqueous solutions of copper(II) acetate, in the presence of a small amount of sulphate ions. Other salts (chloride, nitrate, sulphate) or bases (NaOH, KOH) lead to precipitation rather than gelation. These gels are actually made of an intimate mixture of acetate-based organic/inorganic polymers and nanometric posjnakite crystals Cu₄(OH)₆(SO₄) · H₂O. Acetate ions and ammonia can be partially removed upon washing, which after drying leads to crystalline copper(II) hydroxide needles deposited on a strongly oriented layer of posjnakite crystals. A theoretical model based on the electronegativity equalisation principle is used to describe these experimental results. It provides a better understanding of the role of complexing anions during the formation of condensed phases.     

Vinyl polymerization-412: Polymerization of methyl methacrylate initiated by the system of polyethyleneglycol,copper(II) chloride and water

The polymerization of methyl methacrylate (MMA) was carried out with the system polyethyleneglycol (PEG), copper(II) chloride and water at 85°. The effects of the amount of each component on the conversion of MMA were studied. Some polymerization occurred even if copper(II) ion was not present. It is suggested that there were three reactions: (1) polymerization initiated by the complex of PEG, copper(II) ion and water, (2) polymerization by PEG in water, (3) in the water phase, inhibition by copper(II) ion. The polymerization proceeded through a radical mechanism.     

Evaluation of simulant migration of volatile nitrosamines from latex gloves and balloons by HS-SPME-GC-MS

Nitrosamines are a group of carcinogens that have been found in various latex products. Methods have been developed for extraction, concentration and detection of simulant migration of volatile nitrosamines from latex gloves and balloons. After glove samples or balloon samples were treated with artificial sweat and artificial saliva, headspace solid-phase microextraction and gas chromatography with mass spectrometer detection were performed. Eight volatile nitrosamines were extracted by a fused silica fiber coated with carboxen-polydimethylsioxane, and solid-phase microextraction conditions were optimized. The developed method was successfully used to analyze simulant migration of volatile nitrosamines from latex gloves and balloons. The described methods are rapid and simple, with adequate sensitivity and without organic solvent.     

Thermal and structural studies of the chloro complexes of cobalt and copper with 2-amino-3-methylpyridine

The chloro complexes of 2-amino-3-methylpyridine with cobalt(II) and copper(II) have been prepared in ethanolic solution and solid compounds have been isolated. The compounds have stoichiometry ML₂Cl₂ whereM is Co²⁺ or Cu²⁺ and L is 2-amino-3-methylpyridine. Spectral and magnetic studies have been used to obtain information about the environment of the metal ion in these compounds. The compounds have tetrahedral structures. The thermal decomposition of each compound has been studied using thermogravimetry and differential thermal analysis. Thermogravimetry studies show that the cobalt complex forms an intermediate compound before the metal oxide is produced while the copper compound undergoes decomposition with loss of organic ligand and the formation of copper chloride which then decomposes to give an oxide of copper. The enthalpy of reaction for each of the processes has been calculated from the thermal analysis curves.     

Coordination chemistry of benzoxazole-2-thione. Complexes of some transition metal acetates,tetrafluoroborates, sulphates and nitrates

Several complexes of cobalt(II), nickel(II), copper(II), copper(I), zinc(II), cadmium(II)and mercury(II) acetate, tetrafluoborate, sulphate and nitrate with benzoxazole-2-thione have been prepared and characterized by chemical analyses, ligand-field spectra, magnetic susceptibility measurements, molecular conductances and vibrational spectra (conventional and far i.r.). In the light of spectroscopic investigation it is possible to distinguish whether the anions present are coordinated to the transition metal ion or are present as free ions. Spectroscopic parameters of the cobbalt(II) and nickel(II) complexes are compared with similar chromophores containing sulphur, oxygen and nitrogen donor atoms. The evidence suggests that the sulphato- and nitrato-derivatives of cobalt and nickel are tetrahedral, the nickel tetrafluoroborato-derivative resulted octahedral, while the nickel acetato-complex and the complexes of the cobalt acetate and tetrafluoroborate resulted square planar and in predominantly planar environment respectively. The zinc, cadmium and mercury derivatives with a 1:2 and 1:3 metal:ligand molar ratio have a tetrahedral symmetry with the exception of[Znbot₂Ac₂] which resulted hexacoordinate with the acetato groups acting as symmetrical chelates. The complexes [ZnbotSO₄] and [CdbotSO₄] have a linear structure with the sulphate group acting as unidentate with a C_3ν symmetry, polymeric structures with the sulphate anion functioning probably as chelate and of symmetry lower than C_2ν being excluded from the i.r. evidence. Allocation for the possible metal-ligand and metal-anion modes have also been made.     

Extraction with long-chain amines-VIII Extraction of the chromium-DCTA complex and its colorimetric determination

Chromium(III) is extracted as the DCTA complex by ion-association with trioctylmethylammonium chloride (Aliquat 336-S), into chloroform, and stripped into 1M potassium nitrate for spectrophotometric measurement at 540 nm. Iron(III) copper(II) are removed beforehand by extraction whith phenylacetic acid. High concentrations of nickel or cobalt prevent complete extraction.     

Investigations of Cobalt, Nickel, and Copper Diethyldithiocarbamates Using Thermal Lens Spectrometry

Thermal lens spectrometry was used to study the dissociation kinetics of diethyldithiocarbamate complexes of copper(II), cobalt(III), and nickel(II) as a function of pH in the presence of chloride and sulfate ions. It is shown that, as distinct from conventional spectrophotometric and potentiometric measurements, the reversible dissociation of the test complexes and the irreversible oxidation of the ligand can be studied separately (at a level of n × 10^–8–n × 10^–6 M) using thermal lens spectrometry. Because of work in more dilute solutions and due account of the kinetic features of the systems in question, thermal lens spectrometry provides a higher accuracy of the determination of stability constants for diethyldithiocarbamate complexes of copper(II), cobalt(III), and nickel(II). The adsorption of the diethyldithiocarbamate complexes in question from water–ethanol solutions (1 : 3) on Silasorb C₁₈ silica is studied, and the adsorption constants are determined. The limits of detection of copper(II), cobalt(III), and nickel(II) diethyldithiocarbamates obtained in extraction–thermal-lens determination are n × 10^–8 M.