Surface-catalyzed chlorine and nitrogen activation: mechanisms for the heterogeneous formation of ClNO, NO, NO2, HONO, and N2O from HNO3 and HCl on aluminum oxide particle surfaces

It is well-known that chlorine active species (e.g., Cl(2), ClONO(2), ClONO) can form from heterogeneous reactions between nitrogen oxides and hydrogen chloride on aerosol particle surfaces in the stratosphere. However, less is known about these reactions in the troposphere. In this study, a potential new heterogeneous pathway involving reaction of gaseous HCl and HNO(3) on aluminum oxide particle surfaces, a proxy for mineral dust in the troposphere, is proposed. We combine transmission Fourier transform infrared spectroscopy with X-ray photoelectron spectroscopy to investigate changes in the composition of both gas-phase and surface-bound species during the reaction under different environmental conditions of relative humidity and simulated solar radiation. Exposure of surface nitrate-coated aluminum oxide particles, from prereaction with nitric acid, to gaseous HCl yields several gas-phase products, including ClNO, NO(2), and HNO(3), under dry (RH < 1%) conditions. Under humid more conditions (RH > 20%), NO and N(2)O are the only gas products observed. The experimental data suggest that, in the presence of adsorbed water, ClNO is hydrolyzed on the particle surface to yield NO and NO(2), potentially via a HONO intermediate. NO(2) undergoes further hydrolysis via a surface-mediated process, resulting in N(2)O as an additional nitrogen-containing product. In the presence of broad-band irradiation (λ > 300 nm) gas-phase products can undergo photochemistry, e.g., ClNO photodissociates to NO and chlorine atoms. The gas-phase product distribution also depends on particle mineralogy (Al(2)O(3) vs CaCO(3)) and the presence of other coadsorbed gases (e.g., NH(3)). These newly identified reaction pathways discussed here involve continuous production of active ozone-depleting chlorine and nitrogen species from stable sinks such as gas-phase HCl and HNO(3) as a result of heterogeneous surface reactions. Given that aluminosilicates represent a major fraction of mineral dust aerosol, aluminum oxide can be used as a model system to begin to understand various aspects of possible reactions on mineral dust aerosol surfaces.     

Relative activity of La2O3, LaOCl, and LaCl3 in reaction with CCl4 studied with infrared spectroscopy and density functional theory calculations

Relative activity of La2O3, LaOCl, and LaCl3 in the destructive adsorption of CCl4 to CO2 was studied with density-functional theory calculations and temperature-programmed reaction experiments monitored with IR spectroscopy. Integral absorbance of the IR peak for phosgene, which is a reaction intermediate, was obtained as a function of temperature, and initial reaction temperatures were compared for different sample amounts of La2O3 and LaOCl. The initial reaction temperatures of about 390 K for La2O3 and 365 K for LaOCl were practically independent of the tested sample weights, and the lower temperature for LaOCl was attributed to a higher activity of surface sites on this material. Calculations suggest that CCl4 decomposition proceeds through a stepwise Cl donation from CCl4 to the surface and that the overall rate is controlled by the first step: CCl4 splitting into a Cl anion and CCl3 cation over an acid-base pair of surface sites. A lanthanum acid site in the pair initiates the split by interacting with one of the chlorine atoms in CCl4, and an oxygen base site stabilizes the remaining CCl3 fragment. Transition state estimates suggest that the relative activity of surface sites can be ranked in the following order: LaOCl > LaCl3 with a partially dechlorinated surface > La2O3. Surface Lewis acidity and basicity of these materials are summarized in terms of the vibrational frequency for adsorbed CO, energy of the lowest unoccupied molecular orbital, and proton affinity. Higher activity of LaOCl is attributed to the higher acidity of the lanthanum site, the higher basicity of the oxygen site, and the geometry of the acid-base pair of sites that allows them to interact with CCl4 simultaneously.     

Destructive adsorption of CCl4 over lanthanum-based solids: linking activity to acid-base properties

The relative activities of a low-surface crystalline and high-surface amorphous LaOCl, further denoted as S1 and S2, have been compared for the destructive adsorption of CCl4. It was found that the intrinsic activity of S2 is higher than that of S1. Both samples were characterized with X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), N2-physisorption, and Raman and infrared (IR) spectroscopy. IR was used in combination with CO2, CO, and methanol as probe molecules. The CO2 experiments showed that different carbonate species are formed on both materials. For S1, a high surface concentration of bidentate carbonate species and a lower concentration of monodentate carbonate were observed. In the case of S2, bulk carbonates were present together with bridged carbonates. CO adsorption shows that S2 and S1 have very similar Lewis acid sites. However, methanol adsorption experiments showed that S2 had a higher number of stronger Lewis acid sites than S1 and that twofold coordinated methoxy species were more strongly bound than threefold coordinated methoxy species. Because of the analogy between methanol dissociation and the removal of the first chlorine atom in the destructive adsorption of CCl4, the sites enabling twofold coordination were likely to be the same Lewis acid sites actively involved in the destructive adsorption of CCl4. La2O3 was less active than the two LaOCl materials, and therefore, the intrinsic activity of the catalyst increases as the strength of the Lewis acid sites increases. S2 contains more chlorine at the surface than S1, which is expressed by the higher number of sites enabling twofold coordination. Moreover, this explains the difference in destructive adsorption capacity for CCl4 that was observed for the samples S1 and S2. Since LaCl3, being the most acidic phase, is not active for the destructive adsorption of CCl4, basic oxygen atoms, however, remain needed to stabilize the reaction intermediate CCl3 as La-O-CCl3.     

Surface characterization of chromia for chlorine/fluorine exchange reactions

The dismutation of CCl(2)F(2) was used to probe the effect of halogenation of chromia by Cl/F exchange reactions to find out the difference between the halogenated inactive and active catalysts. The heterogeneous reactions were performed in a continuous flow Ni reactor and also under simulated reaction conditions in a reactor where after the reaction X-ray photoelectron spectroscopy (XPS) and X-ray excited Auger electron spectroscopy (XAES) analyses are possible without air exposure of the catalyst, i.e., under so-called "in situ" conditions. The Cr(III) 2p XP spectra, which revealed multiplet splitting features and satellite emission, were used for chemical analysis by using a simple evaluation procedure which neglects this inherent complexity. Chemical analysis was also applied by using chemical state plots for Cr 3s in order to cross-check Cr 2p related results. Both ex and in situ XPS show that as soon as Cr(2)O(3) is exposed to CCl(2)F(2) at 390 degrees C fluorination as well as chlorination takes place at the catalyst surface. When the XPS surface composition reaches approximately 4 at. % fluorination and 6 at. % chlorination, maximum catalytic activity was obtained. Application of longer reaction times did not change significantly the obtained surface composition of the activated chromia. The fluorination and chlorination of chromia was further investigated by various HF and HCl treatments. The activated chromia samples and the Cr(2)O(3), Cr(OH)(3), CrF(2)OH, CrF(3) x H(2)O, alpha-CrF(3), beta-CrF(3), and CrCl(3) reference samples with well-known chemical structures were also characterized by X-ray absorption near edge structure (XANES), time-of-flight secondary ion mass spectroscopy (TOF-SIMS), pyridine-FTIR, wet chemical (F and Cl) analysis, X-ray powder diffraction (XRD), and surface area (BET) analysis. The results suggest that the formation of chromium oxide chloride fluoride species, e.g., chromium oxide halides, at the surface is sufficient to provide catalytic activity. The presence of any CrF(3) and/or CrCl(3) phases on the activated chromia samples was not found.     

Sulfate-enhanced catalytic destruction of 1,1,1-trichlorethane over Pt(111)

The catalytic destruction of 1,1,1-trichloroethane (TCA) over model sulfated Pt(111) surfaces has been investigated by fast X-ray photoelectron spectroscopy and mass spectrometry. TCA adsorbs molecularly over SO4 precovered Pt(111) at 100 K, with a saturation coverage of 0.4 monolayer (ML) comparable to that on the bare surface. Surface crowding perturbs both TCA and SO4 species within the mixed adlayer, evidenced by strong, coverage-dependent C 1s and Cl and S 2p core-level shifts. TCA undergoes complete dechlorination above 170 K, accompanied by C-C bond cleavage to form surface CH3, CO, and Cl moieties. These in turn react between 170 and 350 K to evolve gaseous CO2, C2H6, and H2O. Subsequent CH3 dehydrogenation and combustion occurs between 350 and 450 K, again liberating CO2 and water. Combustion is accompanied by SO4 reduction, with the coincident evolution of gas phase SO2 and CO2 suggesting the formation of a CO-SOx surface complex. Reactively formed HCl desorbs in a single state at 400 K. Only trace (<0.06 ML) residual atomic carbon and chlorine remain on the surface by 500 K.     

In situ electron microscopy studies of the sintering of palladium nanoparticles on alumina during catalyst regeneration processes.

Sintering of a palladium catalyst supported on alumina (Al2O3) in an oxidizing environment was studied by in situ transmission electron microscopy (TEM). In the case of a fresh catalyst, sintering of Pd particles on an alumina surface in a 500 mTorr steam environment happened via traditional ripening or migration and coalescence mechanisms and was not significant unless heating above 500 degrees C. After the catalyst was used for the hydrogenation of alkynes, TEM coupled with convergent beam electron diffraction and electron energy loss spectroscopy analysis revealed that most of the Pd particles were lifted from the alumina surface by hydrocarbon buildup. This dramatically different morphology totally changed the sintering mechanism of Pd particles during the regeneration process. Catalytic gasification of hydrocarbon around these particles in an oxidizing environment allowed the Pd particles to move around and coalesce with each other at temperatures as low as 350 degrees C. For catalysts heating under 500 mTorr steam at 350 degrees C, steam stripped hydrocarbon catalytically at the beginning, but the reaction stopped after 4 h. Heating in air resulted in both catalytic and noncatalytic stripping of hydrocarbon.     

双金属氰化物/稀土配合物催化二氧化碳和环氧丙烷的共聚合

使用双金属氰化物/稀土配合物复合催化剂催化二氧化碳和环氧丙烷共聚合,其催化效率比双金属氰化物催化剂有显著提高,得到了数均相对分子质量大于1.0×105的聚合物。研究了复合催化剂的组成(如稀土的种类、稀土与锌的比例(Ln/Zn)、稀土配合物中酸根离子的酸性等)对共聚反应的影响,同时研究了反应体系的压力及反应时间对催化活性的影响。采用Y(CCl3COO)3稀土金属配合物有利于共聚反应的进行。当n(Y)/n(Zn)=6、聚合4 h后,其催化活性比单纯的双金属氰化物提高了31.5%,聚合物的相对分子质量则没有太大变化,而副产物碳酸丙烯酯的质量分数低于2%,而在该温度下单独采用稀土三元催化剂时副产物碳酸丙烯酯的生成量通常在10%以上。聚合物中碳酸酯含量低于双金属氰化物的催化产物,说明稀土配合物只是起到活化金属与环氧丙烷配位的作用,没有提高共聚物的碳酸酯含量,整个共聚合反应依然遵循双金属氰化物催化的共聚反应机理。     

Defect Rich Structure Activated 3D Palladium Catalyst for Methanol Oxidation Reaction

Controlling the structure and properties of catalysts through atomic arrangement is the source of producing a new generation of advanced catalysts. A highly active and stable catalyst in catalytic reactions strongly depends on an ideal arrangement structure of metal atoms. We demonstrated that the introduction of the defect-rich structures, low coordination number (CN), and tensile strain in three-dimensional (3D) urchin-like palladium nanoparticles through chlorine bonded with sp-C in graphdiyne (Pd-UNs/Cl-GDY) can regulate the arrangement of metal atoms in the palladium nanoparticles to form a special structure. In situ Fourier infrared spectroscopy (FTIR) and theoretical calculation results show that Pd-UNs/Cl-GDY catalyst is beneficial to the oxidation and removal of CO intermediates. The Pd-UNs/Cl-GDY for methanol oxidation reaction (MOR) that display high current density (363.6 mA cm⁻²) and mass activity (3.6 A mg_Pd⁻¹), 12.0 and 10.9 times higher than Pd nanoparticles, respectively. The Pd-UNs/Cl-GDY catalyst also exhibited robust stability with still retained 95 % activity after 2000 cycles. A defects libraries of the face-centered cubic and hexagonal close-packed crystal catalysts (FH-NPs) were synthesized by introducing chlorine in graphdiyne. Such defect-rich structures, low CN, and tensile strain tailoring methods have opened up a new way for the catalytic reaction of MOR.     

Potential energy surface for the CCl4 + H --> CCl3 + ClH reaction: kinetics and dynamics study

An analytical potential energy surface for the gas-phase CCl4 + H --> CCl3 + ClH reaction was constructed with suitable functional forms to represent vibrational modes. This surface is completely symmetric with respect to the permutation of the four chlorine atoms and is calibrated with respect to experimental thermal rate constants available over the temperature range 297-904 K. On this surface, the thermal rate constants were calculated using variational transition-state theory with semiclassical transmission coefficients over a wider temperature range 300-2500 K, therefore obtaining kinetics information at higher temperatures than are experimentally available. This surface was also used to analyze dynamical features, such as tunneling and reaction-path curvature. In the first case, the influence of the tunneling factor is very small since a heavy chlorine atom has to pass through the barrier. In the second, it was found that vibrational excitation of the Cl-H stretching mode can be expected in the exit channel.     

不同元素对Fe/AlPO_4-5催化剂CO加氢反应性能的影响(英文)

本文考察了稀土氧化物，合金和氧化锆对ＡｌＰＯ４５载体和Ｆｅ／ＡｌＰＯ４５催化剂的影响。结果表明，Ｌａ、Ｃｅ和Ｙ稀士氧化物的引入可有效地促进硝酸铁丙酮溶液中制备的Ｆｅ／ＡｌＰＯ４５催化剂在ＣＯ加氢反应中的催化活性；负载不同合金的ＡｌＰＯ４５催化剂具有明显不同的催化反应结果；ＺｒＯ可调变ＡｌＰＯ５载体的表面性能，削弱活性组份和载体间的相互作用，使在硝酸铁水溶液中制备的催化剂在合成气转化中具有一定的催化活性。     

EFFECTS OF RARE EARTH OXIDES ON PERFORMANCES OF Ni/Al_2O_3 CATALYSTS FOR METHANE STEAM REFORMING REACTION

The Catalytic performances for methane steam reforming reaction ofNi/Al_2O_3(commercial), Ni/Al_2O_3 (developed surface )and Ni/Al_2O_3-R_xO_y (R israre earth oxide) Catalysts were investigated by means of X-ray diffraction,TG, SEM/ X-ray analysis, pulse gas chromatography,BET and Mercuryporsiniter techniques. The distribution of rear earth oxides on the supports,themetal-support (additives) interaction and the influence of rare earth oxideadditives on the dispersion of active components,catulytic activities,variationof nickel crystallites size,CO chemisorption,formation of NiAl_2O_4 as well asthe reducibility of the catalysts were examined.The presence of rare earthoxides in the Ni/Al_2O_3 (developed surface) results in great improvement ofstubility through suppressing the growth of Ni crystallites,the oxidation of themetallic Ni and the formation of NiAl_2O_4. The effect of heavy rare earth oxidesis more distinct than that of the light ones.Strong metal support interaction(SMSI) exists in Ni/Al_2O_3- R     

Thermal chemistry of cis-1,2-dichloroethene on Pd(111)

The reaction of cis-1,2-dichloroethene (cis-DCE) on Pd(111) has been investigated by temperature-programmed desorption, laser-induced thermal desorption, Auger electron spectroscopy, and Fourier transform reflection absorption infrared spectroscopy. Below 130 K, molecularcis-DCE aggregates, resulting in only about 30% of the molecules from exposures below saturation significantly interacting with the palladium surface. The decomposition of cis-DCE generates the observable species H2, HCl, and ethylidyne. A fraction of cis-DCE molecules lose both chlorine atoms and add hydrogen to form ethylidyne, which is stable on the surface between 250 and 370 K. Hydrogen is liberated at about 420 K from cis-DCE surface fragments that immediately combine with surface chlorine and desorb as HCl. The most intense HCl desorption occurs at about 575 K and is due to surface chlorine reacting with either subsurface hydrogen or hydrogen from the remaining surface alkyl fragments. No carbon-containing species desorb from the decomposition of cis-DCE.     

Time-resolved spectroscopic study of the reaction Cl + n-C5H12 --> HCl + C5H11 in solution

We study the hydrogen abstraction reaction from pentane by chlorine radicals using four different experimental approaches. We use two different solvents (CH2Cl2 and CCl4) and two different chlorine atom sources (photodissociation of dissolved Cl2 and two-photon photolysis of the solvent) to investigate their effects on the recombination and reactivity of the chlorine radical. All four experimental schemes involve direct probing of the transient chlorine population via a charge transfer transition with a solvent molecule. In one of the four approaches, photolysis of Cl2 in dichloromethane, we also monitor the nascent reaction products (HCl) by transient vibrational spectroscopy. Probing both the reactants and the products provides a comprehensive view of this bimolecular reaction in solution. Between one-third and two-thirds of the chlorine radicals that initially escape the solvent cage undergo diffusive geminate recombination with their partner radical (either another chlorine atom or the solvent radical). The rest react with pentane with the bimolecular rate constants k(bi) = (9.5 +/- 0.7) x 10(9) M(-1) s(-1) in CH2Cl2 and k(bi) = (7.4 +/- 2) x 10(9) M(-1) s(-1) in CCl4. The recombination yield phi(rec) depends on both the chlorine atom precursor and the solvent and is larger in the more viscous carbon tetrachloride solutions. The bimolecular reaction rate k(bi) depends only on the solvent and is consistent with a nearly diffusion-limited reaction.     

La改性HZSM-5分子筛催化剂甲醇转化制汽油反应性能研究

采用浸渍法制备了La改性HZSM-5分子筛催化剂,利用X射线衍射（XRD）、氮气吸附-脱附、氨气程序升温脱附（NH₃-TPD）以及吡啶吸附红外光谱（Py-FTIR）技术对催化剂进行表征,并在固定床微型反应评价装置上,在反应温度350℃,系统压力0.1 MPa,甲醇质量空速4.74 h^-1的条件下,考察La改性HZSM-5分子筛催化剂的甲醇转化制汽油反应性能。结果表明,La改性HZSM-5分子筛催化剂的酸量降低,比表面积和孔容减小。La负载量为4%时,其MTG反应性能最佳,催化剂的寿命和汽油收率分别由改性前的12 h和52.69%增加到16 h和59.28%。此外,随着La负载量的增加,汽油中芳烃含量显著降低,降幅达18%。     

Rh/SiO_2催化剂上甲烷部分氧化制合成气的反应机理

采用原位Raman光谱技术,在原料气中的O2未完全耗尽的条件下,对CH4部分氧化制合成气反应的Rh/SiO2催化剂床层前部贵金属物种的化学态以及由CH4解离所生成的碳物种进行了表征.在此基础上采用脉冲反应和同位素示踪技术,比较了CH4的部分氧化及其与H2O和CO2的重整等反应对催化剂床层氧化区内CO和H2生成的相对贡献,并将实验结果与Ra-man光谱表征结果进行了关联.结果表明,在600°C下将还原后的4%Rh/SiO2催化剂切入CH4:O2:Ar=2:1:45原料气,催化剂床层前部未检测到铑氧化物的Raman谱峰,但可清晰检测到源于CH4解离的碳物种;在700°C和接触时间小于1ms的条件下,催化剂床层的氧化区内已有大量CO和H2生成,在相同的实验条件下,CH4与H2O或CO2重整反应对氧化区内合成气生成的贡献则很小;以CH4:16O2:H218O:He=2:1:2:95为原料气的同位素示踪实验结果表明,在原料气中16O2未完全耗尽的情况下,反应产物中C16O的含量占CO生成总量的92.3%,表明CO主要来自CH4的部分氧化反应.上述结果均表明,在O2存在下Rh/SiO2催化剂上CO和H2可以通过CH4直接解离和部分氧化机理生成.     

Synthesis of LPPE by gas-phase copolymerization of ethylene with 1-butene: A highly efficient chromium oxide supported catalyst

A modified chromium oxide supported catalyst has been developed and applied in industry for the manufacture of LPPE via the gas-phase (co)polymerization of ethylene. The catalyst contains surface chromium oxide in the oxidation number Cr²⁺, two modifiers (aluminum oxide and fluorine surface compounds), and silicon dioxide as a support. The activity of the new chromium oxide catalyst in the gas-phase copolymerization of ethylene with 1-butene is higher by a factor of 4–5 than that of the traditional commercial catalytic system based on the supported bis(triphenylsilylchromate) catalyst. An increased reactivity of 1-butene in its copolymerization with ethylene in the presence of the chromium oxide catalyst makes it possible to reduce the consumption of 1-butene in the synthesis of a linear medium-density PE (0.937–0.938 g/cm³). Gas pipes made of PE prepared with the new catalyst are characterized by improved resistance to crack propagation.     

In-situ UV-Raman study on soot combustion over TiO_2 or ZrO_2-supported vanadium oxide catalysts

UV-Raman spectroscopy was used to study the molecular structures of TiO2 or ZrO2-supported vana-dium oxide catalysts.The real time reaction status of soot combustion over these catalysts was de-tected by in-situ UV-Raman spectroscopy.The results indicate that TiO2 undergoes a crystalline phase transformation from anatase to rutile phase with the increasing of reaction temperature.However,no obvious phase transformation process is observed for ZrO2 support.The structures of supported va-nadium oxides also depend on the V loading.The vanadium oxide species supported on TiO2 or ZrO2 attain monolayer saturation when V loading is equal to 4(4 is the number of V atoms per 100 support metal ions).Interestingly,this loading ratio(V4/TiO2 and V4/ZrO2) gave the best catalytic activities for soot combustion reaction on both supports(TiO2 and ZrO2).The formation of surface oxygen com-plexes(SOC) is verified by in-situ UV Raman spectroscopy and the SOC mainly exist as carboxyl groups during soot combustion.The presence of NO in the reaction gas stream can promote the pro-duction of SOC.     

酸处理活性炭对其负载的RbNO3-KF催化剂气相合成C2F5I反应性能的影响

对活性炭(AC)进行酸处理能够改变表面含氧官能团,从而加强金属前驱体与活性炭载体的锚固作用,改变催化剂的分散度和表面碱性.采用HCl,HNO3和HF分别对AC进行处理,制得一系列AC负载的RbNO3-KF催化剂,考察了它们在气相合成C2F5I反应中的催化性能.采用N2吸附-脱附、Boehm滴定、CO2程序升温脱附、X射...     

Methyl chloride production from methane over lanthanum-based catalysts

The mechanism of selective production of methyl chloride by a reaction of methane, hydrogen chloride, and oxygen over lanthanum-based catalysts was studied. The results suggest that methane activation proceeds through oxidation-reduction reactions on the surface of catalysts with an irreducible metal-lanthanum, which is significantly different from known mechanisms for oxidative chlorination. Activity and spectroscopic measurements show that lanthanum oxychloride (LaOCl), lanthanum trichloride (LaCl3), and lanthanum phases with an intermediate extent of chlorination are all active for this reaction. The catalyst is stable with no noticeable deactivation after three weeks of testing. Kinetic measurements suggest that methane activation proceeds on the surface of the catalyst. Flow and pulse experiments indicate that the presence of hydrogen chloride is not required for activity, and its role appears to be limited to maintaining the extent of catalyst chlorination. In contrast, the presence of gas-phase oxygen is essential for catalytic activity. Density-functional theory calculations suggest that oxygen can activate surface chlorine species by adsorbing dissociatively and forming OCl surface species, which can serve as an active site for methane activation. The proposed mechanism, thus, involves changing of the formal oxidation state of surface chlorine from -1 to +1 without any changes in the oxidation state of the underlying metal.     

Infrared spectroscopic and density functional theory studies on the reactions of yttrium and lanthanum atoms with nitrous oxide in excess argon

Reactions of laser-ablated Y and La atoms with N2O molecules in excess argon have been investigated using matrix-isolation infrared spectroscopy. Metal monoxide-dinitrogen complexes, OM(N2) (M = Y, La) and OYNN, have been formed during sample deposition and identified on the basis of isotopic shifts, mixed isotopic splitting patterns, and CCl4-doping experiments. The OYNN(+) and OLaNN(+) cation complexes appear during sample deposition and increase visibly upon broad-band irradiation (lambda > 250 nm) at the expense of the neutral metal monoxide-dinitrogen complexes. Density functional theory calculations have been performed on the products. The agreement between the experimental and calculated vibrational frequencies, relative absorption intensities, and isotopic shifts supports the identification of these species from the matrix infrared spectra. Furthermore, a plausible reaction mechanism for the formation of these products has been proposed.